Problem With Auto Loading Modules And Nvidia

Well I have old Nvidia card that seems to be giving me problems. The card is
01:07.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
The problem is that if I allow modules to be autoloaded my system will crash at boot. And it differs from crashes that i am used to seeing. Rather than going thru the whole boot and ending up at the login screen, I get a bunch of junk of the screen saying kernel panic. But unlike regular kernel panic errors it spits out a lot of lines and is stuck there.
Over six distros have failed to fully boot. Even the mighty knoppix couldnt get all the way thru. Debian and gentoo worked but for various reasons I dont want them for my system. Arch is my distro of choice. Why they work i dont know ? Maybe debian works due to they use old software. Gentoo well i have no clue, i used the installer to install cause i was lazy, but it installed w/ no problems??? Arch installed perfect as usually but upon boot fails.
Can anyone explain what i must do to get modules to autoload?

Ok fixed it FINALLY. Many many many many thanks go to stonecrest from #archlinux for the solution.
he said to do
hwdetect --show-modules
and then go thru and modprobe them untill one crashes my system. This is what i got
hwdetect --show-modules
AGP : agpgart intel-agp
IDE : ide-cd ide-core ide-disk generic piix
SCSI : sd_mod
USB : usb-storage usblp usbhid usbcore ehci-hcd uhci-hcd snd-usb-audio snd-usb-lib
NET : ppp_generic slhc tulip
SOUND : snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-ac97-bus snd-ac97-codec snd-ens1371 soundcore snd-usb-audio snd-usb-lib
VIDEO : nvidia
OTHER : cdrom hw_random lp ppdev rtc i2c-algo-bit i2c-i801 i2c-i810 i2c-core evdev gameport pcspkr serio_raw parport parport_pc pci_hotplug shpchp
Luckly i didnt have to go thru all of themsince it was intel-agp that was causing all the pain. So now i have a better vid card than intergrated and Arch Linux!!!!

Similar Messages

  • Problems with Safari Loading Sites and Photos

    For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3  4 GB.   Intel Duo Core 2.66 GHz
    Mac also will frequently not upload photos at websites like Yahoo News or Facebook.   It does this throughout the day.
    So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning.  Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
    I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
    Thank you.
    AngieRK

    Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
    Unless you have a good reason not to, you should update the OS to version 10.7.5.

  • Problems with Photoshop - loading filters and brushes

    I'm having problems with my plug ins in Photoshop, which also includes brush sets.
    There are all present and correct in the usual area you save them with in the application folders.
    But when I want to use them in Photoshop either they don't show, or I get an error message saying I don't have the privileges to load them.
    If you can help in any way, it would be great as I am at a loss on how I can get them to work. These are fairly critical to completing certain work (graphics for distressed T Shirts)
    and would like to get them up and working before a project flies in and I can't use them.
    I was able to add a few plug ins by changing the permissions on the files. But this has not solved the problem for all & I am still unable to get "MACHINE WASH DELUXE" to work.
    Any help or suggestions would be useful,
    Thanks
    Stones

    Sorry, the brushsets appear to be fine but it is the plugins we still have issues with.  8BF. files, they are stored under photoshop CS4 in applications, this plug in were trying to get work "MACHINE WASH DELUXE" worked on this Mac & Photoshop version previously, but on a different user account (Now a domain user, used to be a administrator that connects into the domain) Interestingly though non of the plugins work for the scanner etc, although they are in the same location as they would of been for the previous user. Not much done in trouble shooting the issue, once the brushes started to appear because we corrected the permissions, we were stumped on what move to take next.
    Thanks for you assistance
    Stones

  • Problems with 10.8.3 and Nvidia Quadro 4000

    Hi,
    I have not been able to upgrade from 10.8.2 to 10.8.3 because it does not support my Nvidia Quadro 4000 for Mac. It crashes when I try to rotate an attached screen 90 degrees. It does not matter if the screen is attached to the DVI or the Display Port. Anyone else have this problem and is there a fix?  I reported as a developer to Mac Developer forums with no answer and they also closed the ticket.

    This problem has been solved by 10.8.4 update. So that is great news!
    10.8.3 did not fix it so that is why I stayed on 10.8.2 until this latest one came out. Thanks Apple.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - Try the remaining items of:
    iOS: Troubleshooting applications purchased from the App Store

  • IE11 Problem with Windows 8.1 and IIS 8.5

    I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website  hosted on the local machine. The problem occurs with both
    the desktop version of IE11 and the Windows 8 metro style version.
    When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
    to Windows 8.1 exhibit the same fault.
    The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
    It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
    Can anyone help me? Assitance with this problem would be most appreciated. 

    Description
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    </dir>
    Problem signature
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Problem Event Name: APPCRASH
    Application Name: IEXPLORE.EXE
    Application Version: 11.0.9600.16384
    Application Timestamp: 52157231
    Fault Module Name: MSHTML.dll
    Fault Module Version: 11.0.9600.16432
    Fault Module Timestamp: 52620354
    Exception Code: c0000005
    Exception Offset: 002964a7
    OS Version: 6.3.9600.2.0.0.256.48
    Locale ID: 2057
    Additional Information 1: ab90
    Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
    Additional Information 3: d486
    Additional Information 4: d48664e52db6f0b0676e13c96e422192
    </dir>
    Extra information about the problem
    <dir>
    </dir><dir></dir><dir></dir><dir>
    Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
    </dir>

  • My iPod says there's a problem with my last purchase and every time I try to look at my history to clear the problem it says there no connection to ITunes

    When I log into my acc it ammediatly says there's a problem with my last purchase and to go to my purchase history to clear it.  When I hit continue its suppose to take me to the history but it just loads then says cannot connect

    the itunes says that it knows that there isan ipod there, but it doesnt recognize it. I have reset the ipod, restarted my computer, and reinstalled itunes.
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components (Apple Mobile Device Support, Apple Application Support, etc ...) and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Problems with auto upgrade Anyconnect 3.1

    Hello,
    I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
    Here is the situation :
    I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
    Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
    If I configure client software back to 2.5 on ASA, it works again for every client.
    Do you have an idea ?
    Thanks for your reply.
    Yann

    I have seen the same behavior on Mac OS X. A couple of points for me:
    If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
    My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
    Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

  • Problem with delta load urgent!!

    Hi,
    I have a problem with delta load
    We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
    we are in 3.5 system
    For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
    Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
    now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
    do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
    pls throw ur inputs ASAP
    thank you

    Hi Prince,
    No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
    Follow the below steps:
    1)create full load IP for this data source.
    2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
    3) in menu bar, click on scheduler --> select full repair request
    4) In the next screen check the check box and save
    5) Now execute the IP, it will the data with out disturbing your daily delta.
    follow the same procedure to load data till to your Info Cube.
    Please revert if you have any questions
    Regards,
    Venkatesh

  • Problems with the load of Deliveries

    Hi experts,
    I am having some problems with the load of Deliveries from R/3 into BW.
    In LIPS table of R/3, there are 41412 records. I delete the setup tables and realize the extraction with the transaction OLI8BW. After that I launch a simulation with RSA3 but only 6765 records are taken into account.
    Apart of that, there is a range of deliveries documents (between 180000000 and 1084000000) that is not be taken into account.
    Has someone have similar problems with the load of deliveries?
    Thanks.

    Matute,
       you can try comparing those missing records with those already extracted. I found in my side that some records with document category of "H"(Returns) don't be extracted by 2lis_12_vcitm.
    Jin Ming

  • ITunes has stopped working.  Problem with iTunes Helper Module

    After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

    here you go
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunesHelper.exe
    Application Version: 7.3.1.3
    Application Timestamp: 468d67e8
    Fault Module Name: QuickTimeStreamingAuthoring.qtx
    Fault Module Version: 7.2.0.240
    Fault Module Timestamp: 4684a83a
    Exception Code: c0000005
    Exception Offset: 00016c09
    OS Version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 18fe
    Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
    Additional Information 3: 4735
    Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
    Extra information about the problem
    Bucket ID: 466198587

  • Performance problem with OLE_FLUSH_CALL function module

    Hello Everyone,
    I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
    Could you please help me in knowing solution for this problem?
    Thanking you in advance.
    Srinivas

    Hi Srinivas,
    the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
    How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
    Best Regards, Randolf

  • Could not complete the ... command because of a problem with the filter module interface

    I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
    I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
    The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
    Any insight appreciated.
    Stu

    Not sure I know what you mean by "disabling the Nik filter folder".
    I have the latest updates for the Nik filters and they are compatible with CS6.
    Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
    I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
    Stu

  • Can't use certain filters- "problem with the filter module interface"

    Hello,
    I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
    I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed.  Any recommendations on how to fix this? Is it possible to undo  the update?

    Usually this means a bug in the third party plugin that you are using.

Maybe you are looking for