Problem with B1DE 2.0 on Vista with VS2008

I just installed B1DE 2.0. I use Visual Studio 2008 on Vista.
When creating a B1 addon project I get an error. I describe the steps I perform:
I choose File > New > Project
I choose Visual Basic > VB B1 AddOn Wizard
I get an error: "Connection error: Connection - Could not find SBO that match the connection string".
However, when clicking ok, I can specify the connection settings. So, I assume the error box message is no problem.
After I click "connect", I choose for SSO and I just click Next to go to the following screen.
When I click "finish" on the last screen, I get the following error: "Access to the path 'C:\Program Files\SAP\SAP Business One Development Environment\SAP Business One AddOn Wizard\project templates\VS2008\VBAddOnTemplate.vbproj' is denied".
In the statusbar of VS2008 you can read: "Creating project 'ProjectName'... project creation failed"
What should I do to make an add-on for SAP B1 2007 in VS2008?

>
Yatsea Li wrote:
> When I click "finish" on the last screen, I get the following error: "Access to the path 'C:\Program Files\SAP\SAP Business One Development Environment\SAP Business One AddOn Wizard\project templates\VS2008\VBAddOnTemplate.vbproj' is denied".
>
> -- the problem is the strict permission setting in vista, you may runas admin to open the VS2008 and create the addon again.
When I run VS2008 as admin, and I click "VB B1 AddOn Wizard" and then on "OK" to create a new AddOn project, the statusbar simply just shows "Creating project ProjectName... project creation failed ".
Then I realized that B1DE was installed as "just for me" instead of "everyone". Now, problem is solved by running VS2008 as admin and installing B1DE for everyone. Thanks for your help.

Similar Messages

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Problem with standby and Vista

Hi!
I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
Can anybody help me with this problem?
scw

well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
http://support.microsoft.com/kb/933607/en-us
problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Problem with installing Paint shop Pro photo X2 on with Vista

Trying to install Paint shop photo x2 on my note book but at the end of the installation it freezes and there seems to be some problem with "registering"...
Corel (supplier of paint shop) now advised me to change some drivers but the links I received are for XP or lower versions.
Is there anybody who had the same problem and find the solution?
i have tried already several things (like shutting down norton, msconfig changes etc)....
Thanks for your help!

Hi
I have noticed that not all programs and applications are compatible and support the Vista OS. Did you check if this program supports Vista?
I think this should be clarified firstly.
I would recommend contacting the Paint shop Pro manufacture for the troubleshooting.
Good luck

Problem with Photostream on a PC with VISTA

Problem with Photostream on a PC with VISTA
I have latest Vista SP installed. I installed the download for ICloud for Vista Control Panel. I followed Apple's instructions and am unable when I snap a picture to have it downloaded on my PC to the default directories.
I have done a iCloud backup a couple of times.
I have changed the directory destinations, turned off my firewall, and still not getting the pics on my PC.
Help is appreciated. Thanks..

Well, the problem has been partially solved. When using the free Camera Plus app, all works as it should. All pics that I take download successfully.
Does this mean that the the Apple Camera app is defective?
How do you fix this app, cannot be deleted on the IPOD.

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Windows Vista and WiFi networking problem with MackBook Air

Hi, everyone!
Thanks in advance for the following help.
For some specific programms I need Windows Vista to be set up on my MacBook Air.
The problem with Broadcom WiFi adapter.
While moving large files over home network it hangs and looses the wifi network. It works OK while surfing the internet or doing other low traffic job. But when it comes to 2 MB/sec transfer it doesn't work. I tried two different routers, no positive result. PC works propely on any file sizes. After booting the Leopard the problem goes away. So it is onle Windows Vista problem.
May be drivers? I tried 4.170.25.19 Windows Vista drivers from Broadcom - it didn't help. But I am not goog in driver settings in Control Panel, so may be the solution is there.
Any ideas how to solve it?
Thanks for help in advance.
Andrey.

Hello Nescom. Welcome to the Apple Discussions!
I'm afraid I really don't have an answer for you but I can offer my experiences with large files transfer with Vista. My current home network is a combination of Windows PC, Windows Servers, and Macs. Large file transfers between most of them have relatively the same performance, except when transferring large files from the Vista PC to any other OS. It is demonstrably slower. Interestingly, transfers between Vista machines does not appear to be a problem. I understand that this is a known problem by Microsoft and was supposed to be fixed with Vista SP1.
So the problem might not be your network, but Vista itself. I'm curious if you have this problem when transferring large files to another Vista device?

What to do when installing itunes to windows vista home basic an message appears saying"there is a problem with this windows installer package.A program run as part of the setup did not finish as expected.Contact your support personnel or package vendor."

what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
"There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Need to know because this is driving me nuts now!

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this windows package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."

I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!

a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter

Itunes problem with windows Vista

ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
However I played two times the same song on itunes and two times on windows media player.
Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
Every single time on Windows media player it never sounded like that.
So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
This is more likley a problem with the song than iTunes

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

Problems with Windows Vista and Speedster 945GT?

Hi!
I've been trying to install Windows Vista on my Speedster 945GT-based system for some time now, but I am unable to get it to run stable.
It hangs on random occasions when installing and if one is lucky it's gets thru the install but then it hangs at the desktop in Vista.
I'm using the latest BIOS version out (1.2) and a Core2Duo T7600 CPU.
I have even tried other CPU's to rule out CPU error with the same results. Same goes with different sticks of memory.
Does anyone have a sollution to this problem?
Btw, it works fine when Windows XP is installed.
Best regards
Johan

I had similar problems with Vista 32-bit (Ultimate). I got the board with BIOS v1.0, while I also purchased a T7200 Dual 2 Core. This did not work at all. MSI Netherlands was kind enough to flash the BIOS for me with v1.2 so I could get things working. However, I was not too lucky with Vista. Could just get to the boot screen, but then it hung.
BIOS v1.3 did the trick. I have things working now, but the onboard video is a disaster. Windows Update installed new chipset drivers but this did not help. Intel Graphics drivers did also not improve things.
I started with an analog connection to my 1280x1024 Philips 170B2. Worked ok, but could not get the system working in a higher resolution than 1024x768 which is obviously not preferred. At that time, the DVI connector of my monitor was in use by another system, soon to be replaced by this one.
Instead of worrying about the resolution on the analog connection I thought it was time to hook my monitor up via DVI. And then things started to get even worse.
The POST is visible, you can see Windows starting but then there is a black screen. Windows is fully loading, I can hear through the speakers. I can even login, but still no screen.
So I went back to analog VGA and guess what - same issue with analog VGA now!
System works 'fine' in Safe Mode, but even the 640x480 boot option does not help.
My temp solution now is to use my 7600GS, but as the onboard video might be good enough for me (if it works), I would prefer to get things working.

Problem with B1DE 2.0 on Vista with VS2008

Similar Messages

Maybe you are looking for