Problem with calculated fields

Hello,
I have an acces table like this:
Id_Customer Type Currency
1 Credit 1000,00
1 Credit 100,25
1 Debt 500,45
1 Debt 50,55
What I wanna do is to displayed the following result:
Total Credit: 1100,25
Total Debt: 560,00
Total: 540,25
I am using ASP VBScript.
Maybe is quite simple, but i can't figured it out.
Any help will be very appreciated.
Thanks.
Gilson

SELECT SUM(Currency) AS Credit
FROM someTable
WHERE Id_Customer=1 AND Type=Credit
SELECT SUM(Currency) AS Debt
FROM someTable
WHERE Id_Customer=1 AND Type=Debt
If you have multiple Customers in the same table, then you'll
want to look
at using GROUP BY
"Gilson Roda" <[email protected]> wrote in message
news:e5f0cu$7q5$[email protected]..
> Hello,
> I have an acces table like this:
> Id_Customer Type Currency
> 1 Credit 1000,00
> 1 Credit 100,25
> 1 Debt 500,45
> 1 Debt 50,55
>
> What I wanna do is to displayed the following result:
> Total Credit: 1100,25
> Total Debt: 560,00
> Total: 540,25
>
> I am using ASP VBScript.
> Maybe is quite simple, but i can't figured it out.
> Any help will be very appreciated.
> Thanks.
> Gilson
>
>
>

Similar Messages

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

OBIEE 11G - problem with calculating percentage

Hi,
I have a problem with calculating a percentage....
I have a 2 measures Success and Failure
where Success is a count(Response_key)
Failure is a count(failure_key)
I want Success/(Success+Failure) * 100
I am getting this value as a 0
Infact any column I take from the subject area and say count of that column and divide it by any integer say count(column1)/5 ,Say count of that column1 is 132 Eg: 132/5 , Its showing this value as 26.00 when I put decimal value to 2 , but it is 26.4...It is avoiding decimal values .
So in my case success/(success+failure) in which Dr is greater than Nr . Since we get the value as 0.something . It is showing 0 value
So , 0*100 it is showing me as 0%
Can anyone please help me on this ??
--Siri

Yes, you need to put cast in numerator alone to get the resultant output in double.
You can mark the post as Correct since your issue is resolved now.
Thanks

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Problem with calculated column, everything inc. NULLs appear

Good morning,
This one is tough.
I have a dimension Category (with categories: Fruits, Vegies, Canned, etc.). And in my fact table I have field Expense. Then I decided to create calculated fields like "Fruits Expense" -
CASE WHEN Dim."Category" = 'Fruits' THEN Fact.Expenses "."Expenses $ CY" END
There're 2 problems:
A) if the field Category isn't dropped in Answers there're many NULLS (all Exp values which don't belong to 'Fruits')
B) If Category isn't there, there're even more NULLs - which don't look good at all - there're too many empty values
Of course, it's possible to train users to use filters (is not null), etc. - but then it's really not what OBIEE is good at.
Can someone suggest a better approach?
I proposed in the beggining to create fields in the DB like "Expense Fruits" - but ut was deemed too complicated on ETL side.
Thank you and have a wonderful OBIEE day
UPD: OK, I want to rephrase it and make it easier. Except for using "is not null" filter- is there any other way to supress NULL values? I'm getting 12 empty ones and 1 i need. Is there anything I could do in order to supress showing NULL values by default. Thanks
Message was edited by:
wildmight
Message was edited by:
wildmight

Thank you Nilanshu! Where have you been! I'm already seeing quite a few useful contributions. I'll try to go ahead and test your suggestions and I'll report what I've found.
P.S> It works like a charm. Thank you
Message was edited by:
wildmight

Problems!: calculated fields in Adobe Forms using the ISR/PCR framework.

Hi there,
I have made an Adobe form in the ISR framework. Everybody who is familiar with these forms in the framework knows that the adobe form is embedded in a standard webdynpro which consist of a roadmap with three steps.
Step 1: Fill out the form
Step 2: Check and fill the form
Step 3: Submit the form. After submit the form can be send to a manager or can be directly processed in SAP HR.
Problem 1:
When I test the adobe form and fill in a number in a field and click on next everything goes fine. But when I click on previous step the value which I filled in before is gone and put to 0,00.
Problem 2:
Also another problem is that calculated fields, do not show directly when clicking on next step. When you click on next step and then previous step, then you see the value of the calculated field.
Problem 3:
Also another problem is with the calendar function. When I fill in a date by hand and click on next the BADI behind the form sees 00-00-0000. When I use the calendar function everything goes well.
Who can help me with these 3 problems.
Greetings.
Message was edited by: Sandhya Banwarie

Hi Phil,
Interesting - I have a similar issue. We want to use the Request for Transfer scenario in ERP 2005, but it has not been developed in Adobe forms by SAP yet (it isn't available in 2004 either)! So, we have decided to use the old JSP PCRs instead.
Your issue is probably because you're using the same 2005 iviews to create your PCRs. The 2005 PCR iviews are written in WebDynpro, and appear to assume that each one will be an Adobe form! If you assign the old PCR iviews to your manager (give them the old MSS role under Migrated Content->EP5.0... in the pcd if you have it installed), you will be able to create a PCR with the JSP forms (regardless of the "Entry in Web" setting in QISRSCENARIO).
The next issue is the approval. In 2005, transaction SWFVISU has task TS50000075 configured as Java Webdynpro. You'll need to change that to iView, and specify ID = com.sap.pct.hcm.isrdispatcher.default. I'm following the UWL item type guide for this at:
http://help.sap.com/saphelp_nw04s/helpdata/en/b1/cc1357eead454bb144face4a66be7d/content.htm
Having said this, my approval is not working! The item type has clearly changed, because the workitem name is no longer a hyperlink (rather annoying), but when I hit the "Launch Task Page" button (default name I think) I get the error:
"Unable to perform action because the system returned an invalid URL"
I can't see this "invalid url" anywhere in the logs, so I can't see where it is getting it from, or what path, etc I'm meant to put! In your old system, what did you have as the "Server for ISR call" under "Additional Data for Scenario" in QISRSCENARIO? Also, what did you have in the "URL" box that appears under the Additional Data for Scenario button when you change the Entry Type to JSP?
Many thanks,
Russell.

Erratic behavior with calculated fields

A new issue,
I am working on a form with a great many numeric input fields.
These fields are used in a series of calculations
Item one - The first calcualted field sub-totals a column of numbers
Item two - The second calculated field subtracts a column of numbers from that sub-total
Item 3 - The third calcualted field is the totals four columns like the one listed above.
Item 4 - The last calculation is the total above divided by four.
A simple calculation is uses to enter this total at the start of the next page and so forth throughout the form.
The problem is that sometimes as I add figures to item one, the number does not always update in item four right away. I kind of have to jimmy with the entries a little. Itis like the totals column lags behind by one entry.
I also get a number of issues when going backwards and removing entries.
Any thoughts on what I am doing wrong?
Steve

Thanks much...this occured to me as well after I posted this...felt kind of dumb actually. But that was indeed the correct
solution.
Thanks much.
Steve

Problem with Date fields in Search panel

Hi all,
I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
Could somebody help me with some advice?
Thanks in advance!

Hi Frank,
Thanks for the answer.
I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
Here I post the code from my page.
<table border="1" style="margin:5px;">
<tr>
<td>
<af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
inlineStyle="width:780px;">
<table cellspacing="2" cellpadding="3" border="0">
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.EGN.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.EGN.inputValue}"
label="#{bindings.EGN.hints.label}"
columns="#{bindings.EGN.hints.displayWidth}"
maximumLength="#{bindings.EGN.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.LNC.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.LNC.inputValue}"
label="#{bindings.LNC.hints.label}"
columns="#{bindings.LNC.hints.displayWidth}"
maximumLength="#{bindings.LNC.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.AccPersonID.inputValue}"
label="#{bindings.AccPersonID.hints.label}"
columns="#{bindings.AccPersonID.hints.displayWidth}"
maximumLength="#{bindings.AccPersonID.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.PersonName.hints.label}"/>
</td>
<td align="left" colspan="5">
<af:inputText value="#{bindings.PersonName.inputValue}"
label="#{bindings.PersonName.hints.label}"
columns="#{bindings.PersonName.hints.displayWidth}"
maximumLength="#{bindings.PersonName.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateFrom.inputValue}"
label="#{bindings.DateFrom.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
</af:inputDate>
</td>
<td align="right">
<af:outputLabel value="#{bindings.DateTo.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateTo.inputValue}"
label="#{bindings.DateTo.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateTo.format}"/>
</af:inputDate>
</td>
</tr>
<tr>
<td align="right">
<af:commandButton actionListener="{bindings.Execute.execute}"
text="#{bundle.FindBtn_LABEL}"
disabled="#{!bindings.Execute.enabled}"
icon="/images/find.png"/>
</td>
<td align="left">
<af:commandButton text="#{bundle.FindClearBtn_LABEL}"
icon="/images/find_clear.png"
action="#{PeopleBean.onClearVCBtn}"/>
</td>
</tr>
</table>
</af:showDetailHeader>
</td>
</tr>
</table>
Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
Do you have any suggestions?

Problem with Date-Field

Hi,
I have a problem with a date-field. Maybe I must describe the problem more detailled, but first I just want to ask you, if you know the following error-message: "21.10.2010 kommt nicht in der Menge der erlaubten Werte vor". I don't know the correct translation but it must be something like this: "21.10.2010 does not occur in the quantity of the permitted values". I don't find the position in the sourcecode of this message. And I know, that this message isn't thrown by a functionblock from SAP. So what is the describtion of this message?

Yes I have a date field in my form. Ok I must describe it more detailled. I have an employee searchfield. After select an employee you see a form. After filling the form you click on "Send". It creates a ticket and sends the data to the Backend and jumps back to the employee search field. Untill this point everything works fine. There is no problem with the datefield. Now I want to create the form. I choose an employee and fill the form. But now it comes this message. But not after clicking the "send" button. The message comes after changing some data (e.g. change a radio button). So it looks like a validationproblem, but only at the second creationprocess. Maybe the first date is in some cache? I don't know...

Smartform: Formatting Problem with QUAN-Field

I want to print a smartform and get exception 1 (formatting error). With function SSF_READ_ERRORS I get an error table. There is on entry: errnumber = 020011, msgid = SSFCOMPOSER, msgty = E, msgno = 601, msgv1 = wa_outtab-menge.
It seems to be a formatting problem with field WA_OUTTAB-MENGE. But in the structure this field is referenced correctly.
Does anybody know a solution?

I solve this kind of problem in my SmartForm.
Try this:
Go to "Global Definitions" Node, then "Current/Quant.Fields" tab and set these values:
Field Name: WA_OUTTAB-MENGE
Reference Field: WA_OUTTAB-MEINS
Data Type: QUAN
Best Regards,
Eduardo Ribeiro.

Problem with decimal fields using BADI For PD Infotypes

Hi,
I'm implementing BADI HRBAS00INFTY.
For reading the fields of infotype , I'm using the substring
of the field NEW_INNNN-VDATA .
I have a problem with fields of type DEC.
In field NEW_INNNN-VDATA it looks like this : '####'
I believe that the possible reason for this is conversion from DEC to CHAR
But I don't know how to fix it.
Thank you .
Message was edited by: Alon Lozinsky

Hi Alon,
We had same issue. Use following code.
data: hri1011_str type hri1011.
move new_innnn-vdata to hri1011_str.
HRI1011_STR fields will have decimal values.
Let me know if you still have any issues. If solution works, kindly do Point Recognition.
-Bharat

Problem with number field

Hi,
I'm using ADO (Oracle Provider for OLEDB) to connect Oracle 9. If the type of any field in table is Number(9) and I open query with this field, all negative values are displayed as positive values. For example: If I write -1 value to this field and then post the dataSet (Delphi7 - TADOQuery) value is refreshed to 1. Real value in database is -1.
Could anybody help me with this problem?
Regards Jan.

Once again :)
I finally foud out that Deplhi does support (varDecimal), but delphi TCustomADODataSet (ADO recordSet wrapper) component incorrecltly treats such field type. It regards Decimal(<9,0) as integer (TIntegerField) but when it gets value from underlying ADO recordset it expects integer variant. So it's delphi problem. I hat to fix this problem in source code of this component.
Regards Jan.

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Problems with reference field in material type

Hi,
I have problem with field reference in material type creation.
When I define a self-defined field reference ZERS (copy of standard field reference HERS) for a own defined material type ZERS (copy of material type HERS), I get the following error message:
Field reference ZERS has not been set up
Message no. CZ127
Diagnosis
You have specified a field reference that has not been set up.
Procedure
Set up the new field reference or use an already existing field reference.
I do not understand why because the entry ZERS is present in table T130A.
Here is the IMG config I have made:
1. Logistics general->Material Master->Field selection->Maintain field selection for Data Screens (here I made copy of field reference HERS and named it ZERS)
2. Logistics general->Material Master->Basic Settings->Material types->Define attributes of Material types (here I made a copy of material type HERS and named it ZERS. I then tried to set the field T134-FLREF "Field reference" to ZERS, but then the error message appears)
Does anyone know what config I am missing?
Or any reason why the error message CZ127 is coming up?
Thanks

Must have been system error, I deleted all entries and did it all over again, it worked.

Problem with calculated fields

Similar Messages

Maybe you are looking for