Problem with "Confirmation" changes in PO using ORDRSP Idoc

Hi all,
I have an issue when changing "Confirmations" tab in PO.
I configured Output Message Z001 that should be determined when I change values in that tab. That scenario is working fine, but the real change will be done by ORDRSP Idoc. Using that Idoc, change is done in the PO but no output message is determined (condition records are fine). I need to send a Custom Idoc once that change is done so I need to determine the output message.
I searched for an OSS note, as it should work using Idoc process, but I didn't found anything. Does anyone know if it exist?
Thanks in advance for your help.
Regards.
David.

Thanks for your answer Jelena,
The main problem here is that all the flow works fine if I execute if manually:
Change in "Confirmations" tab is done --> output message Z001 is generated --> Custom Idoc Z is created.
Therefore, WE20 is correctly configured and also all the required fields that can be changed in "Confirmations" section.
The problem is that real scenario should modify that values using ORDRSP inbound Idoc (ORDERS05). That Idoc is changing the PO, but that change is not triggering any output message (although the same change did it manually), so custom Idoc Z is not created.
Maybe I didn't explain myself very well in my previous message.
Thanks & Regards,
David.

Similar Messages

Problem with flash on IE11 after using adobe cleaner

Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

Problem with Adobe Premiere Elements 12 using Scary Halloween template

I'm having a problem with Adobe Premiere Elements 12 using Scary Halloween template under Menu Theme. My problem is the red line is default to Scenes. I would like it to default to Play. How can I do that? Is it a bug?
Side Note: Other template default to Play Movie
Thanks

jeffrey caban
No bug. Just the way the .psd for the Scary Halloween template was put together.
You are going to have to get into the .psd for the Scary Halloween template and rearrange the
Layer Sets. Do you know how to do that? If not, I will give you very specific instructions on how to
do that.
You want the order of the Layer Sets to look like
That is what worked for me just now to get the disc menu Preview to open to the main
menu with the red highlight under Play.
We will be watching for your reply.
ATR

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

I have a problem with iphone4 I bought a used and unlocked iphone4 old apple id because the first owner dies please help me how to activate iphone4 I unlocked with icloud

I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloud

fherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help.

Passing Changed extended fields using ALE-IDOC to receiving system

Hi all,
Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
For ex. in matmas05 extended for classification and inspection view and then created using 'CREATION'
related bapi.Do i also need to incorporate the changes by change related bapi or ir can be handled by change pointer concept.
Thanks.

Hi Sanu
1) Please tell me how passing changed extended fields using ALE-IDOC to receiving system can be achieved. Is it possible by Chnage pointer concept.
=> Looks like you have extended standard IDOC here. so you need to find User Exit or BADI for the Push program to populate the additional fields. Yes, it is possible thru change pointers as well.
1) Do i need to do some coading after data enters into receiving system as it is required while creating the entries in database table.
=> Yes, as suggested in 1 try finding User Exits/BADIs.
Regards
Shital

Problem with Tempo change using factory - Please Help!

Hi, All
Im experiencing a problem when I change the tempo of an audio file and want to revert back to its original state. I understand that you can not just undo the process so I try and delete the file from my bin and import the file again. The problem that I am experiencing is that even though the original file is at the original tempo, once imported to my bin the temp changes automaticaly to the one I deleted. Is there something I am doing wrong? any help on this would be greatly appreciated.
Thanks
Patryk

you can stretch any audio file already recorded in Logic but there is simple rulethat you must follow:
the Sample must be recorded in Logic at original BPM tempo
you can use Bus routing or bounce...
all resulting files will be vere same as apple loop...
if your file is not recorded in logic just find the correct BPM and after tha, Bounce it!
G

Problem with variables in formulas when using CrystalReportViewer

Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---Aksu

Has anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM

Problems with Plan Change - Needs Immediate Result

Hello,
I have been a long time Verizon Wireless customer. I have two lines, one of which was assigned to a tablet with a 1gb plan. I maintained this line for the upgrade since my other line has unlimited data. I recently upgraded to the Note 3, and in the process was told that I'd have to establish a new line to accomplish the upgrade. The representative, from Costco, let me know that it shouldn't be a problem transferring the same plan to the newly established line and not to worry about anything going wrong. That night I called Verizon for the first time and worked with a customer service representative who ended up making the problem worse by canceling the tablet line before transferringthe device to the new line. This caused a problem with my sim card, and I have to request a new one because my old was was constantly showing an "aging" status. Even a few days later. The first night consisted of two phone calls to Verizon because the rep mentioned above ended up disconnecting me trying to get over to tech support. The second rep was much more helpful, but wasn't able to do anything and let me know I'd have to work with tech support, but should wait until the next day to allow the sim to "age."
The next day was the 4th of July, so I called back the next day and went through a similar process, spent about 30 minutes with one rep, only to be told my sim was still "ageing" and to talk to tech support. Every time I was connected with tech support it was a minimum 30 minute wait, just to be told that there was nothing they could do, again, and they sent me a new sim card. When i received that sim, at which point it was the following week, I called back and activated my tablet successfully. Hung the phone up and thought all was well, until I saw my balance due the next day. It was nearly double what I usually pay. The representative never informed me that it would default to a prorated amount based on that payment, of 4gb. None of which I need. I called back, again, and was told that I wasn't able to use the old plan I had since it didn't exist anymore. This time the representative was very pleasant, and let me know she'd put a request in to see if the old plan would be possible, given my situation. I was alright with that, and this was the first time I wasn't frustrated after hanging up the phone.
She called me back yesterday letting me know that Verizon isn't willing to allow me to use my old plan, and that there is a new plan options, that is 10 dollars a month. Honestly that was all right, so I called in today to change it to that plan and have it backdated to the date of upgrade to fix my billing issue. During the process of looking up my information, the representative I spoke with today disconnected me. Over the last week and a half I have spent nearly 3-4 hours on the phone with Verizon just trying to fix this issue that was not anything I could have controlled.
The rep at Costco told me I'd have no issues transferring my lien to the new line we opened that day, and the first individual I spoke with on the phone canceled the line too early and further delayed the process by requiring me to request a new SIM card for the tablet. After being disconnected this time, I'm extremely frustrated with the entire situation and Verizon in general. I've been a customer of Verizon for nearly ten years, and for the fist time I am considering moving to another carrier seeing. In that ten year period, I have probably called into customer service less than 5 times. And in the last week and a half I have made more calls, and spent far more time on the phone than every before.
The bottom line is, I need to have the plan changed on my tablet line to something comparable to what I had previously, which was a 20 dollar, 1gb plan with the 10 dollar tablet fee. I need this taken care of ASAP and I need to know it's being done correctly. If Verizon is going to partner with companies like Costco to provide phones to members, and increase their customer base, than these reps need to be better equipped to handle the upgrade process. And it seems that the call centers I have spoken with are a 50/50 shot in terms of reaching someone who is able to do their job effectively and in a timely fashion.
I hope to be contacted with a resolution by today or I will be returning the phone, and looking elsewhere for my wireless needs.
Thank you.
Josh

There is an "undocumented" parameter you need to include in your
page. It MUST be a hidden field value called "p_action". The
form hidden value is either "OK" or "CANCEL" (case sensitive).
Thus, when the form is submitted, this parameter states to
commit the changes. Useful if you have a "Save" button and
a "Cancel" button.

Sliding Window Table Partitioning Problems with RANGE RIGHT, SPLIT, MERGE using Multiple File Groups

There is misleading information in two system views (sys.data_spaces & sys.destination_data_spaces) about the physical location of data after a partitioning MERGE and before an INDEX REBUILD operation on a partitioned table. In SQL Server 2012 SP1 CU6,
the script below (SQLCMD mode, set DataDrive & LogDrive variables for the runtime environment) will create a test database with file groups and files to support a partitioned table. The partition function and scheme spread the test data across
4 files groups, an empty partition, file group and file are maintained at the start and end of the range. A problem occurs after the SWITCH and MERGE RANGE operations, the views sys.data_spaces & sys.destination_data_spaces show the logical, not the physical,
location of data.
--=================================================================================
-- PartitionLabSetup_RangeRight.sql
-- 001. Create test database
-- 002. Add file groups and files
-- 003. Create partition function and schema
-- 004. Create and populate a test table
--=================================================================================
USE [master]
GO
-- 001 - Create Test Database
:SETVAR DataDrive "D:\SQL\Data\"
:SETVAR LogDrive "D:\SQL\Logs\"
:SETVAR DatabaseName "workspace"
:SETVAR TableName "TestTable"
-- Drop if exists and create Database
IF DATABASEPROPERTYEX(N'$(databasename)','Status') IS NOT NULL
BEGIN
ALTER DATABASE $(DatabaseName) SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DROP DATABASE $(DatabaseName)
END
CREATE DATABASE $(DatabaseName)
ON
( NAME = $(DatabaseName)_data,
FILENAME = N'$(DataDrive)$(DatabaseName)_data.mdf',
SIZE = 10,
MAXSIZE = 500,
FILEGROWTH = 5 )
LOG ON
( NAME = $(DatabaseName)_log,
FILENAME = N'$(LogDrive)$(DatabaseName).ldf',
SIZE = 5MB,
MAXSIZE = 5000MB,
FILEGROWTH = 5MB ) ;
GO
-- 002. Add file groups and files
--:SETVAR DatabaseName "workspace"
--:SETVAR TableName "TestTable"
--:SETVAR DataDrive "D:\SQL\Data\"
--:SETVAR LogDrive "D:\SQL\Logs\"
DECLARE @nSQL NVARCHAR(2000) ;
DECLARE @x INT = 1;
WHILE @x <= 6
BEGIN
SELECT @nSQL =
'ALTER DATABASE $(DatabaseName)
ADD FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';
ALTER DATABASE $(DatabaseName)
ADD FILE
NAME= ''$(TableName)_f' + CAST(@x AS CHAR(5)) + ''',
FILENAME = ''$(DataDrive)\$(TableName)_f' + RTRIM(CAST(@x AS CHAR(5))) + '.ndf''
TO FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';'
EXEC sp_executeSQL @nSQL;
SET @x = @x + 1;
END
-- 003. Create partition function and schema
--:SETVAR TableName "TestTable"
--:SETVAR DatabaseName "workspace"
USE $(DatabaseName);
CREATE PARTITION FUNCTION $(TableName)_func (int)
AS RANGE RIGHT FOR VALUES
0,
15,
30,
45,
60
CREATE PARTITION SCHEME $(TableName)_scheme
AS
PARTITION $(TableName)_func
TO
$(TableName)_fg1,
$(TableName)_fg2,
$(TableName)_fg3,
$(TableName)_fg4,
$(TableName)_fg5,
$(TableName)_fg6
-- Create TestTable
--:SETVAR TableName "TestTable"
--:SETVAR BackupDrive "D:\SQL\Backups\"
--:SETVAR DatabaseName "workspace"
CREATE TABLE [dbo].$(TableName)(
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_scheme(Partition_PK)
) ON $(TableName)_scheme(Partition_PK)
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_GUID_PK] DEFAULT (newid()) FOR [GUID_PK]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateDate] DEFAULT (getdate()) FOR [CreateDate]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateServer] DEFAULT (@@servername) FOR [CreateServer]
-- 004. Create and populate a test table
-- Load TestTable Data - Seconds 0-59 are used as the Partitoning Key
--:SETVAR TableName "TestTable"
SET NOCOUNT ON;
DECLARE @Now DATETIME = GETDATE()
WHILE @Now > DATEADD(minute,-1,GETDATE())
BEGIN
INSERT INTO [dbo].$(TableName)
([Partition_PK]
,[RandomNbr])
VALUES
DATEPART(second,GETDATE())
,ROUND((RAND() * 100),0)
END
-- Confirm table partitioning - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
--=================================================================================
-- SECTION 2 - SWITCH OUT
-- 001 - Create TestTableOut
-- 002 - Switch out partition in range 0-14
-- 003 - Merge range 0 -29
-- 001. TestTableOut
:SETVAR TableName "TestTable"
IF OBJECT_ID('dbo.$(TableName)Out') IS NOT NULL
DROP TABLE [dbo].[$(TableName)Out]
CREATE TABLE [dbo].[$(TableName)Out](
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)Out] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_fg2;
GO
-- 002 - Switch out partition in range 0-14
--:SETVAR TableName "TestTable"
ALTER TABLE dbo.$(TableName)
SWITCH PARTITION 2 TO dbo.$(TableName)Out;
-- 003 - Merge range 0 - 29
--:SETVAR TableName "TestTable"
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (15);
-- Confirm table partitioning
-- Original source of this query - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
The table below shows the results of the ‘Confirm Table Partitioning’ query, before and after the MERGE.
The T-SQL code below illustrates the problem.
-- PartitionLab_RangeRight
USE workspace;
DROP TABLE dbo.TestTableOut;
USE master;
ALTER DATABASE workspace
REMOVE FILE TestTable_f3 ;
-- ERROR
--Msg 5042, Level 16, State 1, Line 1
--The file 'TestTable_f3 ' cannot be removed because it is not empty.
ALTER DATABASE workspace
REMOVE FILE TestTable_f2 ;
-- Works surprisingly!!
use workspace;
ALTER INDEX [PK_TestTable] ON [dbo].[TestTable] REBUILD PARTITION = 2;
--Msg 622, Level 16, State 3, Line 2
--The filegroup "TestTable_fg2" has no files assigned to it. Tables, indexes, text columns, ntext columns, and image columns cannot be populated on this filegroup until a file is added.
--The statement has been terminated.
If you run ALTER INDEX REBUILD before trying to remove files from File Group 3, it works. Rerun the database setup script then the code below.
-- RANGE RIGHT
-- Rerun PartitionLabSetup_RangeRight.sql before the code below
USE workspace;
DROP TABLE dbo.TestTableOut;
ALTER INDEX [PK_TestTable] ON [dbo].[TestTable] REBUILD PARTITION = 2;
USE master;
ALTER DATABASE workspace
REMOVE FILE TestTable_f3;
-- Works as expected!!
The file in File Group 2 appears to contain data but it can be dropped. Although the system views are reporting the data in File Group 2, it still physically resides in File Group 3 and isn’t moved until the index is rebuilt. The RANGE RIGHT function means
the left file group (File Group 2) is retained when splitting ranges.
RANGE LEFT would have retained the data in File Group 3 where it already resided, no INDEX REBUILD is necessary to effectively complete the MERGE operation. The script below implements the same partitioning strategy (data distribution between partitions)
on the test table but uses different boundary definitions and RANGE LEFT.
--=================================================================================
-- PartitionLabSetup_RangeLeft.sql
-- 001. Create test database
-- 002. Add file groups and files
-- 003. Create partition function and schema
-- 004. Create and populate a test table
--=================================================================================
USE [master]
GO
-- 001 - Create Test Database
:SETVAR DataDrive "D:\SQL\Data\"
:SETVAR LogDrive "D:\SQL\Logs\"
:SETVAR DatabaseName "workspace"
:SETVAR TableName "TestTable"
-- Drop if exists and create Database
IF DATABASEPROPERTYEX(N'$(databasename)','Status') IS NOT NULL
BEGIN
ALTER DATABASE $(DatabaseName) SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DROP DATABASE $(DatabaseName)
END
CREATE DATABASE $(DatabaseName)
ON
( NAME = $(DatabaseName)_data,
FILENAME = N'$(DataDrive)$(DatabaseName)_data.mdf',
SIZE = 10,
MAXSIZE = 500,
FILEGROWTH = 5 )
LOG ON
( NAME = $(DatabaseName)_log,
FILENAME = N'$(LogDrive)$(DatabaseName).ldf',
SIZE = 5MB,
MAXSIZE = 5000MB,
FILEGROWTH = 5MB ) ;
GO
-- 002. Add file groups and files
--:SETVAR DatabaseName "workspace"
--:SETVAR TableName "TestTable"
--:SETVAR DataDrive "D:\SQL\Data\"
--:SETVAR LogDrive "D:\SQL\Logs\"
DECLARE @nSQL NVARCHAR(2000) ;
DECLARE @x INT = 1;
WHILE @x <= 6
BEGIN
SELECT @nSQL =
'ALTER DATABASE $(DatabaseName)
ADD FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';
ALTER DATABASE $(DatabaseName)
ADD FILE
NAME= ''$(TableName)_f' + CAST(@x AS CHAR(5)) + ''',
FILENAME = ''$(DataDrive)\$(TableName)_f' + RTRIM(CAST(@x AS CHAR(5))) + '.ndf''
TO FILEGROUP $(TableName)_fg' + RTRIM(CAST(@x AS CHAR(5))) + ';'
EXEC sp_executeSQL @nSQL;
SET @x = @x + 1;
END
-- 003. Create partition function and schema
--:SETVAR TableName "TestTable"
--:SETVAR DatabaseName "workspace"
USE $(DatabaseName);
CREATE PARTITION FUNCTION $(TableName)_func (int)
AS RANGE LEFT FOR VALUES
-1,
14,
29,
44,
59
CREATE PARTITION SCHEME $(TableName)_scheme
AS
PARTITION $(TableName)_func
TO
$(TableName)_fg1,
$(TableName)_fg2,
$(TableName)_fg3,
$(TableName)_fg4,
$(TableName)_fg5,
$(TableName)_fg6
-- Create TestTable
--:SETVAR TableName "TestTable"
--:SETVAR BackupDrive "D:\SQL\Backups\"
--:SETVAR DatabaseName "workspace"
CREATE TABLE [dbo].$(TableName)(
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_scheme(Partition_PK)
) ON $(TableName)_scheme(Partition_PK)
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_GUID_PK] DEFAULT (newid()) FOR [GUID_PK]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateDate] DEFAULT (getdate()) FOR [CreateDate]
ALTER TABLE [dbo].$(TableName) ADD CONSTRAINT [DF_$(TableName)_CreateServer] DEFAULT (@@servername) FOR [CreateServer]
-- 004. Create and populate a test table
-- Load TestTable Data - Seconds 0-59 are used as the Partitoning Key
--:SETVAR TableName "TestTable"
SET NOCOUNT ON;
DECLARE @Now DATETIME = GETDATE()
WHILE @Now > DATEADD(minute,-1,GETDATE())
BEGIN
INSERT INTO [dbo].$(TableName)
([Partition_PK]
,[RandomNbr])
VALUES
DATEPART(second,GETDATE())
,ROUND((RAND() * 100),0)
END
-- Confirm table partitioning - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
--=================================================================================
-- SECTION 2 - SWITCH OUT
-- 001 - Create TestTableOut
-- 002 - Switch out partition in range 0-14
-- 003 - Merge range 0 -29
-- 001. TestTableOut
:SETVAR TableName "TestTable"
IF OBJECT_ID('dbo.$(TableName)Out') IS NOT NULL
DROP TABLE [dbo].[$(TableName)Out]
CREATE TABLE [dbo].[$(TableName)Out](
[Partition_PK] [int] NOT NULL,
[GUID_PK] [uniqueidentifier] NOT NULL,
[CreateDate] [datetime] NULL,
[CreateServer] [nvarchar](50) NULL,
[RandomNbr] [int] NULL,
CONSTRAINT [PK_$(TableName)Out] PRIMARY KEY CLUSTERED
[Partition_PK] ASC,
[GUID_PK] ASC
) ON $(TableName)_fg2;
GO
-- 002 - Switch out partition in range 0-14
--:SETVAR TableName "TestTable"
ALTER TABLE dbo.$(TableName)
SWITCH PARTITION 2 TO dbo.$(TableName)Out;
-- 003 - Merge range 0 - 29
:SETVAR TableName "TestTable"
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (14);
-- Confirm table partitioning
-- Original source of this query - http://lextonr.wordpress.com/tag/sys-destination_data_spaces/
SELECT
N'DatabaseName' = DB_NAME()
, N'SchemaName' = s.name
, N'TableName' = o.name
, N'IndexName' = i.name
, N'IndexType' = i.type_desc
, N'PartitionScheme' = ps.name
, N'DataSpaceName' = ds.name
, N'DataSpaceType' = ds.type_desc
, N'PartitionFunction' = pf.name
, N'PartitionNumber' = dds.destination_id
, N'BoundaryValue' = prv.value
, N'RightBoundary' = pf.boundary_value_on_right
, N'PartitionFileGroup' = ds2.name
, N'RowsOfData' = p.[rows]
FROM
sys.objects AS o
INNER JOIN sys.schemas AS s
ON o.[schema_id] = s.[schema_id]
INNER JOIN sys.partitions AS p
ON o.[object_id] = p.[object_id]
INNER JOIN sys.indexes AS i
ON p.[object_id] = i.[object_id]
AND p.index_id = i.index_id
INNER JOIN sys.data_spaces AS ds
ON i.data_space_id = ds.data_space_id
INNER JOIN sys.partition_schemes AS ps
ON ds.data_space_id = ps.data_space_id
INNER JOIN sys.partition_functions AS pf
ON ps.function_id = pf.function_id
LEFT OUTER JOIN sys.partition_range_values AS prv
ON pf.function_id = prv.function_id
AND p.partition_number = prv.boundary_id
LEFT OUTER JOIN sys.destination_data_spaces AS dds
ON ps.data_space_id = dds.partition_scheme_id
AND p.partition_number = dds.destination_id
LEFT OUTER JOIN sys.data_spaces AS ds2
ON dds.data_space_id = ds2.data_space_id
ORDER BY
DatabaseName
,SchemaName
,TableName
,IndexName
,PartitionNumber
The table below shows the results of the ‘Confirm Table Partitioning’ query, before and after the MERGE.
The data in the File and File Group to be dropped (File Group 2) has already been switched out; File Group 3 contains the data so no index rebuild is needed to move data and complete the MERGE.
RANGE RIGHT would not be a problem in a ‘Sliding Window’ if the same file group is used for all partitions, when they are created and dropped it introduces a dependency on full index rebuilds. Larger tables are typically partitioned and a full index rebuild
might be an expensive operation. I’m not sure how a RANGE RIGHT partitioning strategy could be implemented, with an ascending partitioning key, using multiple file groups without having to move data. Using a single file group (multiple files) for all partitions
within a table would avoid physically moving data between file groups; no index rebuild would be necessary to complete a MERGE and system views would accurately reflect the physical location of data.
If a RANGE RIGHT partition function is used, the data is physically in the wrong file group after the MERGE assuming a typical ascending partitioning key, and the 'Data Spaces' system views might be misleading. Thanks to Manuj and Chris for a lot of help
investigating this.
NOTE 10/03/2014 - The solution
The solution is so easy it's embarrassing, I was using the wrong boundary points for the MERGE (both RANGE LEFT & RANGE RIGHT) to get rid of historic data.
-- Wrong Boundary Point Range Right
--ALTER PARTITION FUNCTION $(TableName)_func()
--MERGE RANGE (15);
-- Wrong Boundary Point Range Left
--ALTER PARTITION FUNCTION $(TableName)_func()
--MERGE RANGE (14);
-- Correct Boundary Pounts for MERGE
ALTER PARTITION FUNCTION $(TableName)_func()
MERGE RANGE (0); -- or -1 for RANGE LEFT
The empty, switched out partition (on File Group 2) is then MERGED with the empty partition maintained at the start of the range and no data movement is necessary. I retract the suggestion that a problem exists with RANGE RIGHT Sliding Windows using multiple
file groups and apologize :-)

Hi Paul Brewer,
Thanks for your post and glad to hear that the issue is resolved. It is kind of you post a reply to share your solution. That way, other community members could benefit from your sharing.
Regards.
Sofiya Li
Sofiya Li
TechNet Community Support

Problem with merging changes made in Business Catalyst

I put some text frames in my Muse project and now my client try to make some changes in text using Business Catalyst but we have big problem because it is impossible to merge changes back to the Muse project. The site is in Polish language but I also tried to do it with English. The result is different but also wrong.
As you can see bellow (screen1)I tried to change words "Adobe Muse" to "adobe muse" and "apps" to "application". Look at Preview on Page result. The newe phrase "adobe muse" is inside the word "videos" instead of following it. So we have: " ....and videoadobe museuse is....". But fortunatelly after clicking "Merge into Muse" everything is OK (screen2).
But when I use Polish language both results are wrong: Preview on Page and the result after merging (see screen 3 and 4)
So I can't work together with my client and it's a big problem because I choose Muse and Business Catalyst for this project just to have this possibility.
Some ides about reasons? I hope these problems are easily solvable.

Hi TheArtDictator,
The issue you're running into is similar to http://forums.adobe.com/message/6012076#6012076.
There isn't a fix yet. What we know is that HTML character entities (like ® or –) can somehow appear in content edited using In-Browser Editing. The Muse sync process doesn't expect/handle them correctly. What we don't know is what causes these entities to be inserted. To help us figure that out, could you find out:
- Which OS and browser (including versions) were used by the client?
- Did the client copy/paste content from external sources?
Thanks,
Abhishek

Still problems with ID changing in Teaming 2.1?

Hi,
They are still problems with changing the ID from user in the eDIR when they are
will synchronized with the Teaming system?
In the past it was a very bad thing if the user name (ID) was a shortened form the
name of the user e.g. ssmith for Sarah Smith.
When "our" Sarah has married and her new name was e.g. Sarah Stone, new user ID is
sstone, the Teaming system can't "realize" that ssmith and sstone are the same user.
Is this problem fixed in the version 2.1?
THX
Andre

Hi,
A opened a request by Novell and get the answer that all is still the same since version 1.x.
Maybe this behavior will change in the version 4.x.
It's really sad that Teaming can't handle changed IDs.... really sad....
Than we have two ways... first, we change all our IDs to IDs with digits like 1234 or the second way... we use
SharePoint.... really sad.....
I'm wonder me that we are the only firm with such problem....
THX
Andre

Problem with "Confirmation" changes in PO using ORDRSP Idoc

Similar Messages

Maybe you are looking for