Problem with delete operation

Hi all,
Jdev version(11.1.1.3.0)
I have a <af:table> with a check box.I can select the rows
by checking check box and delete those rows.
Sometimes am facing a problem in deleteing the rows.
The viewobject that binded to the table,is based on two
Entity Objects A&B.The table B has no primary key field.But
it has a dynamic row_id as key fileld.
The problem is am not able to filter
the query results,when I select dynamic "Row_Id" in the select
query,I can't filter the records.(In the VO if I unselect the ROW_Id,
got an error like"Row_id missing in the view oject")Because of
this issue am not able to delete the records.Due to
this problem,delete works only in random.
Please share the ideas..
Thanks
Swapna

Try selecting a different attribute for EntityB as a key field

Similar Messages

I how problems with delete/ fix alias

I how problems with delete/fix alias. Somehow, I am trying to delete or fix alias by clicking the icon it show a pop-up saying to click "delete alias" or "fix alias." When I click "delete alias", it wouldn't let me. When I click "fix alias" I could not find what I am looking for. I try clicking different icon, but is show a pop-up saying "it could not be found (error code-43). Can someone help out????

Moved to InDesign forum.
You can start by telling us what the problem is.

Have a problem with deletting a folder that has lots over 100+ folders in it that are locked, please help

Have a problem with deletting a folder that has 100+'s folders in it that are locked. Please help.

Put the folder into the trash - go to the Finder menu and hold down the alt key whilst selecting Empty Trash.
I've never tried this with a folder full of locked files, but it certainly works with a single locked file.
Hope that helps!

Problem with delete index of cube in process chain

HI ,i have a problem with my process chain,here on process name as delet index is ther which has been turned to red.when iam going inside of that in Display message iam getting the msg as"Indexes for InfoCube SMS_C06 have been deleted successfully".
since the process is in red next process is not been triggering,but i have to continue the process chain.
can anybody put some light into it.its very urgent........

Hi,
I ran into the same situation with one of my process chain that is part of a metachain. The process chain has the Delete Index that turned red. But the messages show that the indexes on all the cubes were deleted sucessfully.
As suggested, I did a repeat on the delete index variant, but no luck as it turned red again.
Anyone aware familiar with this issue?
Thanks,
Briston

Problem with crude operations in master detail tables

Hi,
I have Master-Detail tables in my page and crud operations are there for both the tables. Create/delete/edit are working fine on the master table but i am facing the following problems for the detail table
1.delete operation is alway referring to the 1st record.
2.Edit operation is working fine for the 1st time but when i amt trying to edit any other record it's refer to the previous record, if i did the same again then it's pointing to current record.
Selected row keys and selectionListner and row selection is defined on my detail table as shown below.
selectedRowKeys="#{bindings.CmSubscriberTerritoryXrefView1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmSubscriberTerritoryXrefView1.collectionModel.makeCurrent}"
rowSelection="single"
Please do need full.

Hi,
Thanks for your quick reply.
I am using JDeveloper 11g. Yes i select the record, i am using a popup for delete operation so i write a button which invoke popup in that popup i am asking confirmation like do you wanted to delete for not. in the OK button i have return logic like
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("Delete2");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
operationBinding = bindings.getOperationBinding("Commit");
result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
FacesContext fc = FacesContext.getCurrentInstance();

Problems with Sequence Operator in OWB

Hi everybody,
i want to use a sequence in my mapping. Now i have two problems.
The first problem is the following. When i want to import my sequence (exists on my DB) i can select the sequence in the Selection Window, but when i click on Import i didn't see it in the Design Center, also there is no window which tells me that i have successfully imported the sequence.
The second problem is, when i drag the Sequence Operator into my Mapping i shows the Selection Window where i have to select the poject and object to bind the operator. But i can't select any object.
Can anyone help me with my problems and tell me how i can use a Sequence and the Sequence Operator in my Mapping
Many thanks in advance.
Greetings

Hi everyone!
I'm having a repeated problem with sequences in OWB: I'm filling a TIME table with 1096 rows. Now matter how and when I create the sequence it always starts with 2 instead of 1. Moreover, the last value of the sequence is 1101, when it was supposed to be 1097 or 1098....
I did achieve the right ouput sometimes, but I must be doing something wrong. Here are the several ways I've tried in OWB:
1) I've created all the sequences by sql code, in SQL DEVELOPER or PLUS*, and then imported to OWB. Because of being imported, I didn't have to deploy each sequence. Then, I've connected (by drag and drop to the canvas mapping) the sequence I wanted with NEXTVAL (as I always do) attached do TIME_ID of table TIME;
2) I've dropped and created, several times(as before), the sequences and never had problems..until now. I've also experimented creating, by scratch, the sequences just in OWB and then deploy them in Control Center. After this, deployed the mapping and executed, just like in 1).
So, the difference lies on how I create the sequences and what are the correct steps to create, deploy (if needed), deploy the map and execute the map.
This is insain and I really need this to work. I've tried so many ways....
Could someone PLEASE help me with this? Any thoughts?

Problem with the operator less than or equal to in a weby query

Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
Thanks

Looks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil

Problems with deleted outbound deilverys

Hi all,
I have the following problem with a deleted outbound delivery. The issue is that a sales order was created and a outbound delivery was assigned to this sale order, but somebody deleted the outbound delivery, unassigned the corresponding material and the shipping person assigned this outbound to another sale order believing that there were still plenty of material to cover both sales orders.
The help needed here is how do I know which user deleted the outbound delivery is there a record for that??
I'll appreciate your help a lot.
Best Regards,
Erik Espinosa

Malice is seldom behind stuff like this, from my experiences.
Prime candidate is human error (possibly with an attempt to fix it, which also includes hiding it...).
=> Send the sales folks a mail with the order number and description in it and ask them whether any of them know about it or are aware that an error might have been made. This gives them the opportunity to realize the implications of their mistake, or "own up" to it.
Depending on how your system is integrated and how many "cowboy" developers you had / have around, faulty config and even naive user-exits cannot be completely excluded.
=> Hard to find (better to prevent), but doing a where-used-list on the related VK* tables to see whether any Z-programs turn up is a start.
Either way, with the sales order number, you should be able to find the user context which performed these actions via the business change documents.
=> Take a look at the SCD* transactions, and the CD* tables.
If it was a batch user at midnight... then see "Hard to find..." above.
Cheers,
Julius

Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Problems with deleting mail in Mail-Yoesmite 10.10.1

Each day, I have a problem where Mail will not delete messages that I have deleted. The messages I want deleted seems to be in the Trash folder and appear to be deleted when I select the delete button. But when I click out to another folder and then come back to the Trash folder, those messages are still there.
T have tried doing this 3-4 times, with the same result.
I have since found that quitting the Mail program resolves this problem and so each day, I have to quit Mail in order to get it to function correctly.
Clearly, there is a problem with this piece of software, a piece of software which is one of the worst things Apple has ever made and which has been driving me nuts for years.

I can't find a way to edit my question so I am adding further info as a reply.
In addition to not deleting emails, Mail also does not always show me the most recent emails.
When I quit the app and re-open it, a bunch of new emails suddenly appear, all with different time stamps.

Problems with Deleting Confirmation Messages on a 8830 device

I am new to this forum but have a technical issue on a blackberry 8830 device with deleting confirmation messages.
Scenario:
User is replying to users with a confirmation of message read reciept from the blackberry. It copies the reciept in both his exchange account and his blackberry device. He can delete the confirmation of the reciept as usual but here lies the problem when he deletes it on either the blackberry or the exchange account side it won't reconcile it even though the reconcile is setup for both handheld and wireless and wireless email reconcile is turned on. He also has the desktop manager software running on his pc and its still not correcting it.
The BES server is on release 4.0.6.12 with a Microsoft 2000 Exchange Server (I'm thinking this is my issue but don't have any supporting evidence to support it).
Can someone please provide some insight as to what the problem might be in this scenario.

Thanks so much for answering! It looks like that cleared up the problem

Synchronisation problem with deleting an appointment from an iterating appointment

Hello,
I have a problem with the synchronisation of appointments from iCal (Mac OS X 10.7.3) to my iPhone 3GS (iOS 5.1) with iTunes (10.6.1 (7)).
Scenario:
I create an iterating appointment (e.g. each week) in iCal. Than I synchronise these appointments with my iPhone. After that I delete one specific appointment (not the whole iterating appointments) in iCal and synchronise the calendar via iTunes again.
Now the appointment I deleted in iCal still exists on my iPhone. If I choose the option "replace all appointments on my iPhone" in iTunes it doesn't work and the deleted appointment still exists in my iPhone calendar.
Any solutions for this problem? Or is it a known bug?

Hi,
try to make the request status into red in monitor and then delete. if the request deletion taking long time try to change the QM status in to green. i think then the delete box will dissaper. again start from begin convert the status to RED in monitor for that particular request. and then delete it.

Problem With mac Operating system

ok, had a problem with a piece of software and was told to try and "downgrade" my OS. so i started an installer that was an installer to a previous system. i was on 4.8 and was trying to go to 3.4 i think. I got half way thru and it said start the installer again. restarted. instead of the apple logo coming up a round cross comes up. i connected to my comp thru another comp using the firewire but my user folder is empty. anyways i can find anything in the users folder and fix this problem? cheers

Who told you to downgrade your OS X version and was this due to the software not being compatible with your OS X version which was 10.4.8?
What software?
Your computer detail provided indicates you have an Intel Mac and if so, you certainly cannot downgrade to 10.3 - any 10.3.x version. All Intel Macs have shipped with Tiger (10.4.x) pre-installed and there are no OS X versions prior to 10.4.x that is compatible with an Intel Mac and even if so, you cannot install an earlier or previous OS X version on a Mac that shipped with a later version.
Unless you meant 10.4.3 which is the version that was pre-installed on your Intel Mac and the version included with the OS X install package that shipped with your Mac when new.
Did this person who told you to downgrade your OS also tell you to be sure to create a backup or update your existing backup before doing so?
Did you choose Archive & Install with an option to preserve user and network settings?
If not and you choose Erase & Install, then your hard drive was completely erased first.

Problem with define operation

I have wsdl file (simple part of it here)
<message name="otnAsyncServiceRequestMessage">
<part name="peiSessionID" type="xsd:string">
</message>
<message name="otnAsyncServiceResultMessage">
<part name="payload" type="xsd:string"/>
</message>
<portType name="otnAsyncService">
<operation name="initiate">
<input message="tns:otnAsyncServiceRequestMessage"/>
</operation>
</portType>
And my process call async thi service using otn_jaxrpc.jar
Here simple code from bpel file
<assign name="assign-1">
<copy>
<from expression="ora:getConversationId()">
</from>
<to variable="otnAsyncServiceReq" part="peiSessionID"/>
</copy>
</assign>
<invoke name="invokeOTNAsyncService" partnerLink="otn" portType="er2004:otnAsyncService" operation="initiate" inputVariable="otnAsyncServiceReq"/>
<receive createInstance="no" name="receiveFromOTNCallBack" partnerLink="otn" portType="er2004:otnAsyncServiceCallback" operation="onResult" variable="otnAsyncServiceRes"/>
.... i look at result throw tcpmon
and soap envelope look like this
</soapenv:Header>
<soapenv:Body><peiSessionID xmlns="http://er2004.ifirst.ru"/></soapenv:Body>
</soapenv:Envelope>
But i have no peiSessionID operation in wsdl!
And my service not define any operation with that name?!
what's a problem!
Help please!!!

First, check if you have any calendar notes or appointments that you entered without a subject. Delete that note and try to sync.
I hope this helps!
Post relates to: Tungsten E2

SERIOUS PROBLEM WITH DELETED EMAILS!!

Today when I logged onto my Mail, I noticed that ALL of my message over one week old had been deleted. I have my preferences set to delete mail in the TRASH 1 week old, but these I had not sent to the trash/delete folder.
IS THERE ANY WAY TO GET THESE E-MAILS BACK? Where should I check? There are some very important e-mails in this application!

5GB of free hard drive space should be the absolute minimum with OS X and this may have contributed to this problem.
What is the overall size of your Mail folder at Home > Library > Mail?
The Mail.app alone requires the same amount of free hard drive space as the overall size of the Mail folder for general housekeeping during operation and for most people, the Mail folder is constantly growing in size.
This along with paging or virtual memory utilized automatically and dynamically by OS X which uses available free hard drive space.
These factors alone can use all of your available free hard drive space during operation depending on the number of applications running at one time and the amount of RAM installed, etc. Having 5GB of free hard drive space shouldn't cause data loss but it is possible which is why maintaining a regular backup is so important.
See this link for more information about paging or virtual memory with OS X.
http://www.thexlab.com/faqs/lackofram.html

Problem with delete operation

Similar Messages

Maybe you are looking for