Problem with digital output and microph

Hello! I recently bought a new motherboard MSI K8N SLI Platinum that have onboard Sounblaster Li've 24bit, with coaxial and spdif and also the standard outputs. I ve connected via a fiber optical cable to my amplifier and i checked the digital output only box to the advanced settings on the mixer. I am hearing sound very well from my amplifier but when i connect headphones to with microphone to my soundcard , i don't hear anything at all from my headphones. Also i cannot speak via microphone. If i uncheck the box digital output only i hear sound from my headphones and also i can speak to microphone. Is there some way to have them both enabled? In my previous motherboard i didn't have that problem. I could hear sound from my amplifier with pcm signal and from my headphones and microphone analog at the same time.
Thanks!

Thibaud,
The clue is here: " i take acquisition with one sample on demand."
You are apparently using software timed output. To maintain accurate phasing at 80 Hz you need timing which is accurate to better than 4 milliseconds. This is not likely to occur with a desktop operating system. Sometimes it will be good and other times OS latencies will throw the timing way off.
If your board supports it, use hardware timing. The timebase sources on most boards are far more precise and accurate than software timing.
Lynn

Similar Messages

Problem with ora:output and xmlns attribute

Using lastest XDK.
I am using the built in extension ora:output in a stylesheet running via XSQL called from a small java prg.
I am using this to generate several html fragments that will get processed later on not by xsql or xml/xsl but by another java prg.
I have specifed the output as html BUT when I look at the output some of the elements have an xmlns attribute added i.e. xmlns:ora="http://www.oracle.com/XSL/Transform/java"....
Strange thing its not on all elements, "a", "tr", "td" tags are ok but "b", "br" and "table" have this attribute added.... HELP!!
How do I stop this attribute getting added...
Many thanks
Rob
PS I know if I use an "html" tag to wrap the output then only that element ends up with the xmlns attribute but I cant/dont want to do this as the prg running later will combine many of these fragments to create a single "real" html page.

I'm not sure whether i understand your problem,
It doesnot need using the binding attribute If you wanna updating the value of each rows in the datatable.
below is a sample that updating each rows of a datatable
jsp file
<h:dataTable value="#[sampleBean.data}" var="row">
    <h:column><h:inputText value="#{row.col1}"/></h:column>
</h:dataTable>
<h:commandButton value="update" action="#{sampleBean.update}"/>BackingBean:
SampleBean.java
public class Samplebean{
private SampleRow[] rows[];
public SampleRow[] getData{
          return rows;
public String update(){
      for(int i=0; i<rows.length; i++){
         rows.update();
return "success";
SampleRow.java
public class SampleRow{
private String col1;
public String getCol1(){
    return col1;
public void setCol1(String col1){
    this.col1 = col1;
public void update(){
     //write your code to save one row data to db/file here

WebVPN-Problem with Digital Certificate and AAA

Hello everyone,
I have a problem during configuring WebVPN on ASA 5520 using AAA and digital certificate of Microsoft. (MSCEP)
Currently, The WebVPN service is enabled and it worked well with AAA (local or external) only,
But now, I want to use both AAA and Certificate for most secure-I mean that the users will be authenticated 2 times (firstly, it is checked by valid certificate then user/pass is second one).
Here are details:
I tried installation CA server (Microsoft CA service combined with SCEP) and register ASA with CA server (ASA work as subordinate CA)-->these steps is ok, asa has registed, then client use web-browser request CA and it's issued by CA administrator then it is installed on web-browser.
Testing:
The Client tried to test with access SSL VPN, the welcome WEBVPN message prompt user/pass but the message is "Logon Failed" before I give user and pass,
Does anyone know and advise ?
Thanks
Khanh

Hi all,
Here are attach files for my issuse,
Khanh

Help with DIgital Output Array with 6062E DAQ CARD...

Good morning, folks... I need some help with digital output of the 6062E PCMCIA card... I can output 1 line without problems... I need to control a 4066 with my digital outputs... I am doing this without greater problems... but there's something... I need that when one of my outputs is high, the others become low, unchangeably... so I tried to use an array to control my output and I couldn't do that... some errors showed up... can you help me please? Maybe there's any errors at my software, then I thank you if you help me... the vi is anexed...
Best Regards...
Attachments:
Untitled 3.vi ‏20 KB

See below for one of many methods. Change the "lines" string for your setup.
Also, please explore the Examples that ship with LabVIEW, and read your card's manual.
Richard

Problem with Excel output format

Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AM

Hi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati

PROBLEM WITH DIGITAL EDITIONS

Hi,
I've always encountered this problem with digital editions: Adobe Digital Editions 2.0 has encountered a problem and needs to close. We are sorry for the inconvenience.
I'm using Windows XP pro 2002, service pack2 on an old computer AMD Duron 901 Mhz , 384 mb RAM.
is there a solution ?
Thanks

Hi
I had the same problem, ADE 2 won't work with older AMD computers. See http://forums.adobe.com/thread/1081859
Older version that does work at: http://kb2.adobe.com/cps/403/kb403051/attachments/setup.exe
good luck

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

Problem with Digital Signature strategy in Document Managment System

Hello ALL,
I am facing problem with Digital Signature strategy in DMS. If any help its greatly appreciated.
I have senario where Approvers in DMS will review the document and approve the document and put on their digitial signature. if i have multiple approvers maintained in the characterstics it has to check weather it has been approved by all approvers otherwise it has to reset the status to for approval.
My problem is i am able to reset the status back from approved to for approval using the badi document_status01 but when the next approver logs in to the document and change the status to approved he is not able to get the digital signature pop up which it comes only first user approves it.
can any one help me out on whats going wrong in it.
Thanks
Srikanth Aduri.

Hi,
maybe the reason for this is that the status of the digital signature is not changed. Then the system thinks that the digital signature is still completed and therefore the user is not getting the pop-up again. The database table for the digital signature for documents is TC77. I hope this information is usefull for you.
Best regards,
Christoph

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with dropped calls and no reception on Samsung Continuum

My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone. The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference. The phone freezes up frequently, even if no apps are running in the background. We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet. The screen saver kicks in even when we are actively dialing a number, or typing in a text message. The overall performance of the phone is also poor, and it is quite slow much of the time.
We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan. None of my friends with non-Samsung phones are having the same problems with phone reception and performance. I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
I am not upset that my phone has not been updated to Android 2.2. I just want the phone to perform as stated, and not fail at its primary function: making and receiving phone calls. I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care. I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
Thank you.

If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
What carrier were you using with the Razor? AT&T? Same area?
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problems with the richTextEditor and quotes

Hello
I'm having problems with quote chars and the richText
control's htmlText. When users enter quotes into the richTextEditor
control. The quotes breaks the HTML text, meaning it's no longer
well formatted. Is there an escape char that I need to use. Or do I
need to force some kind of refresh on the control prior to using
the htmlText string?

I have been using RTE in a content management system and
found a need to replace non-standard quote characters with proper
UTF-8 character counterparts. Curly quotes in particular are
problematic. Use a replace function to substitute non-standard for
standard characters.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problem with digital output and microph

Similar Messages

Maybe you are looking for