Feedback GPU - windows 8.1 - 64bit PS CS6 extended OK

Hi
i post many months a question to know if i can configure my graphic card to be able to use photohsop CS6 extended .
since it not work after update to 8.1 windows OS and i need to use the 3 D functionnalities .
I need some feed back from user that have the same requirement than me but has a graphic card that work !!
i have only 300 Watt power supply and i don't know if power connector is available on the motherboard for graphic card !!
So my requirements are
-windows 8.1 64 bit
-photoshop CS6 extended
-use 1 slot PCI express x16 ( Gen 2.0) for desktop PC
-2 video connectors for dual screen
-not high end card ( price less than 200)
-no additionnal power cable on the graphic card ( ATX 300 Watt)
Regard's

System requirements | Photoshop
FAQ | Adobe Creative Suite

Similar Messages

Photoshop cs6 extended and windows 8

I Have been told different answers pertaining to photoshop cs6 being compatible with windows 8. Does anyone here use photoshop cs6 on windows 8? Specifically photoshop cs6 extended? Any info would be appreciated! Thanks

The base code of windows 7, vista , 8, and 8.1 are all identical. They are all the same version. They are only point upgrades from each other (based on information from Microsoft)
This means that odds are quite good if it works on 7 or vista, it will work on 8 or 8.1.
This biggest differences are user interface changes between each version of windows, other than that bug fixes.
That said, the .net code is updated and it is possible that something written for version 8 would not be backward compatible.
On another note, I have not heard of any complaints using CS6 on 8, so I am fairly confident that it will run. But like anything, there is always that possibility. (That was my disclaimer, lol.)

Adobe Photoshop CS6 Extended 並びに Dreamweaver CS6 を再インストールした結果

今まで使っていたﾊﾟｿｺﾝのシステムがダメになり、OSを再インストールせざるを得なくなりました。
Windows 8.1に再インストールした後、消えてしまったAdobe　Photoshop CS6　Extended、並びに　Dreamweaver　CS6を再インストール。
それはうまくいきました。
更にそのあと、Adobeのアップデイトをかけたのですが、すべてエラーが出ました。
アップデイトをする必要はないのでしょうか？
アップデイトをしなくても、OSのWindows8.1に何か悪い影響をあたえることはありませんか？
アップデイトの必要があるのであれば、それを成功させる手順を教えていただけませんでしょうか？
ちなみに、私の使用しているｿﾌﾄは学生版で、CDを使って再導入。
マイクロソフトのサポート・センターの方にやっていただきました。
アップデイトがきちんとされないのが気にかかるようです。
古いまま使っていたために、Windows8.1に悪い影響を与えてシステムがダメになるということはありませんか？
お忙しいところ申し訳ございません。よろしくお願い致します。
岡田　光代
Mitsuyo_okada

早速にご回答いただきましてありがとうございました。
自動更新の通知は受け取ったことがないような気がします。
そこで、お薦めされている手動による更新を行ってみました。
ソフトウエア側からのAdobe Photoshop CS6 を起動し、ヘルプ＞アップデート。
Adobe Application Manager の Adobe Photoshop CS6 以下に表示されるすべてのアップデートを２～３回ほど試みましたがエラーメッセージがでます。エラーコードは下記の通りです：
Adobe　Photoshop13.0.1.3　U44MIU5
Dreamweaver CS6 (12.0.3) U44MIU5
Adobe4 CSXS Infrastructure CS6 U44MIU5
Dynamic Link Media Server CS6.1.0.1 U44MIU15
Adobe Application Manager U44MIP210
Photoshop Camera Raw 8.7 (CS6) U44MIU5
上記の更新がどうしてもだめなようでしたら、ダウンロードによる更新を試みようと思います。
その場合、Dreamweaver CS6のdownloadは最新版の
Ver. 12.0.3 - HiDPI 準拠とクリティカルな不具合の修正（2012/12/12）
のみをすればよろしいのでしょうか？
それとも
Ver. 12.0.1 クリティカルな問題の修正（2012/7/30）
Ver. 12.0.2 クリティカルな問題の修正（2012/9/27）
と順番にdownloadしていった後、2012/12/12の修正版downloadをすべきなのでしょうか？
お手数おかけいたします。
Mitsuyo_okada

Adobe Photoshop CS6 Extended Stop Working

Hellow:
My computer has run Windows 7 ,Run Adobe Photoshop CS6 Extended,I click "edit"-"Control of deformation",the Adobe Photoshop CS6 Extended Stop Working.Why?

Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Speedgrade CC 2014.2 build 8.2x51 unsmooth/choppy 4K playback with GPU R9 295x2 - it uses only 2 GB of RAM (Windows 8.1 64Bit), Mac OS - same problem

Hello, guys
I have following configuration:
i7-5960x @ 4.3 GHz
32 GB DDR4 RAM
ATI 295x2 8GB (Gpusniffer.exe shows 3072 MB on each Hawaii unit)
M.2 Ultra Samsung XP941 (>1000Mb/sec)
Few 850 Pro SSD for H.264 4k source
Latest Speedgrade CC build at 16/02/2015 (DUAL MONITOR SETUP - 2560x1440 for Interface and 4096x2160 for Preview)
I work with a lot of short 10-15 seconds 4K 4096x2160 24FPS H.264 clips from Panasonic GH4. Import them to Premiere CC as is, some warp stabilization, cut them, save project and open in Speedgrade CC. Everything is fantastic smooth in Premiere CC.
In Speedgrade - some simple color correction - Exposition, some keyframes and the most simple grading for some material. I use GPU acceleration for sure to have full 4096x2160 4K 24FPS. But it is not responsive and smooth after some correction is applied. Everything is choppy and freezes first seconds, when I press "PLAY". I used Resources monitor, Task manager (Winodws 8.1 64-bit) and Afterburner. And there is what I found out:
Afterburner shows utilization of single GPU (as we know for playback only 1 GPU used) the same amount like in Premiere. Speedgrade CC uses 2,5GB VRAM. By the way, if I use some none-gpu-accelerated effect, like "transform", for example, imported from Premiere, I will get "Not enough GPU resources" message in Speedgrade. Afterburner shows, that Speedgrade CC tried to utilize more, then max. available VRAM 3GB during this moment. So I switch off such effects, before open project in Speedgrade.
Processor is also low on utilization (15%), maybe even a little lower, then in Premiere CC
Disk - 3-10%, H.264 is low on it
RAM !!! - is the problem. I allowed to use 29 GB of RAM to Adobe apps. Speedgrade CC uses not more, then 2-3 GB according to Taskmanager (mostly 2GB) and Resources Monitor of Windows 8.1 64Bit Pro. After I finished with color correction, opened project in Premiere CC, everything works smooth with lumteri on and! Premiere CC uses 9-10 GB of RAM to play the same clip at full resolution smoothly!!!
I already reinstalled everything, including drivers for GPU, Windows 8.1 and Adobe CC. Same result.
Macbook Pro Retina 15 late 2013 with i7-4960HQ/16gb RAM/Geforce 750m UPDATE!
Under Mac Os Yosemite 10.10.2 - same situation here. Premiere CC uses 5GB (of 11GB available) for 4096x2160 Prores 422 HQ and is usable, smooth with some frame drops.
Speedgrade CC uses 2,5 GB of RAM for 4096x2160 and it is impossible to use full 4096x2160. Only 1/2 Resolution for preview is smooth and usable at notebook display. At external 4096x2160 monitor connected through Thunderbolt it is much more choppy, I think it is hard for 750m with 2 GB of VRAM.
UPDATE! Previous version (CC 2014) of Premiere CC and Speedgrade CC under Windows 8.1 64-bit - same situation.
What do you think?
My opinion - Speedgrade CC is not optimized for 4K resolutions. Premiere CC is good for 4K.
btw, for information, latest AMD catalyst omega driver 14.12 has a problem with my R9 295x2 and Mercury Playback Engine (MPE) OpenCL - just the black screen with sound, when I turn on GPU acceleration. So I use previous 14.9 version. With 14.12 GPUsniffer.exe found one GPU device with 4Gb of VRAM and one GPU with 3GB of VRAM (normally must be 3GB+3GB for 295x2 Dual GPU-chip radeon).

So, I got MSI 290x 8GB tested and... found out that I can't use 8GB of VRAM, because there are some AMD driver limitations!!!
1. I switched off my 295x2 8Gb (4GB+4GB) to be sure, it will not affect VRAM amount.
2. I launched Gpusniffer utility with 14.9 AMD driver and 3072 Mb VRAM was available ONLY! It worked like 295x2 with 3072 + 3072 Mb VRAM.
3. I installed 14.12 AMD Omega driver and GPUsniffer informed that I have now 8192 Mb!!! But! Mercury Playback Engine did not work with Premiere Pro CC or Speedgrade CC as with my 295x2. Just black screen.
RGB and Luma at 0 and preview is black with 14.12 AMD driver. Premiere PRO - the same situation.
With 14.9 AMD Driver. Left 2560*1440 Dell working area monitor and 4096*2160 preview LG monitor right side.
With 14.9 Gpusniffer shows 3 and 3 and 3GB Vram instead of 4GB and 4GB and 8Gb. As I understood with CrossfireX switched off - Adobe products and their GPUsniffer utility could "find" and use 8GB on primary GPU, but again we can see AMD driver issues.
Single 290x 8GB with 14.9 AMD driver also displays only 3072 Mb available in Gpusniffer.
NEATVIDEO informed on their website in Bugs section about 14.12 driver problem with MPE. They also wrote about problem to AMD, so I did. I think, this is really bad story. So, AMD, we are awaiting for normal drivers.

MSI 785GM-E51 - Amount of usable RAM in Windows 7 Ultimate 64bit

Hello i have the following system:
Mobo: MSI 785GM-E51
Bios: AMI v 2.3
CPU: AMD Phenom II 955 BE @ 3.2Ghz
Memory: 2 dimms of ( KINGSTON KVR1333D3N9/2G DDR3 2GB PC10666 1333MHZ VALUE RAM ) , Total 4Gb
GPU: Sapphire Radeon X1950 Pro with 256mb RAM
OS: Windows 7 Ultimate 64bit
The specific motherboard has an onboard ATI 4200 vga. I've installed the Radeon x1950 pro from day 1 and in the bios settings the onboard vga option reads disabled. However windows 7 during install always recognize both x1950 pro an 4200 and provide drivers. In windows device manager i have the 4200 disabled. However windows display that from the 4GB of installed ram only 3,75GB is usable. Is this normal? Isn't supposed to have all my memory available since the onboard vga is disabled? And if it is disabled from start how windows 7 detect it during installation and suggest corresponding drivers ? I'm looking forward for your opinions and suggestions
Thanks in advance...

Turn memory >4GB remapping on, see your manual how to do it.
And stop bumping your message, it's NOT allowed.
>>Please read and comply with the Forum Rules.<<

No 3D options on Windows 8 in Photoshop CS6 Extended!

Hello everyone! Recently, I have installed Adobe Photoshop CS6 Extended trial from Adobe.com (Yeah, I am sure it was the EXTENDED version). In the setup it says that it is installing ”Photoshop CS6 Extended” and I could saw that yellow leaves -or what that is- girl in the image. But everytime I open the program, it says only ”Adobe Photoshop CS6”, I have no 3D options displayed and if I go to About Photoshop, it says that it is only ”Adobe Photoshop CS6 (not EXTENDED-as I could see on some youtube videos)”! So, what is the problem? I have a 32-bit system and Windows 8 Release Preview installed. I read that XP does not support 3D, but about Windows 8... Or, it does not support 32-bit systems, it only support 64-bit systems??? What should I do? Thank you in advance!
PS: here is the image that I saw when it was installing: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/features/photoshopextended/c s6/images/708x510/psx-overview-poster.jpg !

Hi,
You may even want to check how the other GPU features work on this video card. It is at the minimum requirement for Ps CS6, and given the age of this card it may not be supported.
The minimum required GPU must have 512 MB VRAM for Ps CS6 Extended. We have some cases for GPU with 256-512MB where the 3D menu items aren't disabled, but problems may still occur. The suggested VRAM is 1GB or higher for 3D the feature set.
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows® XP* with Service Pack 3 or Windows 7 with Service Pack 1
1GB of RAM
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512MB of VRAM
OpenGL 2.0–capable system
For a quick look at the difference between Photoshop CS6 and Photoshop CS6 Extended visit this link: https://www.adobe.com/products/photoshopfamily/buying-guide-version-comparison.html
regards,
steve

3D in CS6 extended is not showing up on my computer with a geforce gtx 750 ti on windows 7 home premium

Like I said the 3d menu is not showing up on photoshop cs6 extended edition my specs are the following:
CPU- Intel Pentium G3258 3.2GHz dual core
GPU- EVGA Nvidia geforce gtx 750 ti 2GBs DDR5
RAM- 8GBs DDR3
OS- Windows 7 home premium
if you need more specs than that just ask
It's not an issue with my photoshop version because I downloaded it to my brother's computer (much weaker than mine) and it ran with 3d
Please help.

Update your graphics driver or use an older version that does not use CUDA 6.0 and uses 5.0 so PS can detect it properly...
Mylenium

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs.

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs. Third party program installations work if I restart in safe mode. Updates don't as they cannot be installed in safe mode and require normal mode.
Been happening for months now. Some installations after a long time finally proceed, others dont.
Already trying uninstalling antivirus (Bitdefender) with no result.
Thanks

Hi，
Could you check this issue under clean boot?
Also try this fix tool it repair corrupted registry keys.
https://support.microsoft.com/en-us/mats/program_install_and_uninstall
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*

Greetz,
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
ERROR: DF050: ARKServiceControl::ModifyService failed while saving previous service configuration.(Seq 6)
ERROR: DF050: ARKServiceControl::ModifyService failed for service SwitchBoard. Error 2 The system cannot find the file specified.(Seq 6)
ERROR: DW063: Command ARKServiceControlCommand failed.(Seq 6)
ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 3(Seq 1)
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 1 Exit Code: 3 Service Specific Exit Code: 0(Seq 1)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
Thanks in advance.

Thank you for the reply. I will try the steps listed in the document you linked me to. In case any of the procedures works, I will mark your post as "Correct".
Thank you, once again.

Adobe Photoshop CS6 Extended 64-Bit GPU Acceleration Stopped Working

I've been using Photoshop CS6 Extended 64-bit when one day the GPU acceleration features stopped working. I closed the application and restarted it and the GPU acceleration still didn't work. I couldn't rotate the canvas or use scrubby zoom. I rebooted my system and it still wasn't working. I check my performance preferences and my graphics processor was detected with the "Use Graphics Processor" box checked. I unchecked it and rechecked but the GPU acceleration still wasn't working. I uninstalled Photoshop CS6 and reinstalled it. I got the GPU acceleration to work opening the application right after the install. I close Photoshop CS6 64-bit and reopened it and the GPU acceleration wasn't working again. I am able to use GPU acceleration features in Photoshop CS6 32-bit with no problem. I'm running Windows 7 Ultimate 64-bit Ultimate Edition and I have a GeForce 280m GTX GPU. Would there be anyone out there who can help me with this issue. Thanks.

From what I gathered on this Forum there is a good chance that it may be related to the driver – unfortunately it could be either becasuse it’s obsolete or a bad new version.
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html

[解決事例]Photoshop CC 2014「Windows 8.1 64bit環境スキャナーから読み込むには」

【製品】
Photoshop CC 2014
【環境】
Windows 8.1 64bit
【問い合わせ内容（お客様の目的）】
スキャナーから読み込みたい
Canonに問い合わせたところ、Adobe側でプラグインがあるはずだといわれた。
【対応内容】
TWAINプラグインは64bitには対応しておりません。
Photoshop CCもしくはCS6の32bit版の場合、TWAINプラグインをインストールすることが可能です。
Creative Cloudデスクトップアプリケーションから以前のバージョンをインストールし、プラグインファイルをコピー&ペーストすることで、スキャナが使用可能になります。
＜参考リンク＞
TWAIN プラグインの使用について（Photoshop CS4/CS5/CS6）
◆この内容で解決できましたか？　解決出来ない場合は、Photoshop (Japan)　へ戻って質問しましょう！

I also began to install the new Lightroom CC (2015) and updated Photoshop 2014 to version 2014 2.2 (64bit) and Bridge.to 6.1.0.116 x64 all from the Creative Cloud Apps. I had things to do and when I came back, Lightroom had installed, with a new icon just called Lightroom and Photoshop and Bridge had failed to complete the download, according to creative Cloud. I tried everything I could think of to get them to finish the download and got a message saying that bridge was corrupt and nothing at all for Photoshop.
In desperation I restarted my computer and opened Creative Cloud and the downloads started again! They eventually installed with no help from me and now work properly. When you open the new Lightroom it prompts you to let it build a new catalogue. No problem other than you now have two versions of Lightroom, one identified as v5.7.1 64-bit, the other just as Lightroom. You then have to rename the icon to CC (2015).
Basically, some of these updates are a pain with many problems. Looking for information on problems can take forever. Getting help is such a time waster and some of the live help personnel do not seem to be very well trained. The whole Photoshop system seems to have got way too big to be easily handled. It needs to be reorganized. [End of rant]

GPU probs in CS6 Extended

as the title says, i have probs with GPU probs in CS6 Extended, video card is a Gforce GT 610, with the latest driver downloaded from their site.
when i go to in CS6, when i go to edit/preferances/performance, it tells me NO GPU in photoshop standard.
not only does it say its the extended version, the image on loading is totally diferent to the standard version.
im running XP, with SP3 and 4 gig of ram.
question is, how do i get the GPU working
thanks for any help

thanks for the help guys, the system isnt that old realy... though as computers go 5 years is OLD, I did give windows 7 a shot on a laptop, but didnt like the look of it at all, though i have heard there is a small app around to get it looking like XP (give me a break guys, hard to teach an old dog new tricks
guess i could get a new MoBo and CPU and give it a bit more ram, all other parts should be interchangeable, psu, case, dvd.
Just thinking, how would a dual boot go on here? id just be useing the win 7 partition for CS6, so i guess how windows looks is a moot point.

Photoshop CS6 Extended 64bit - histogram clipping issue

CS6 clips the histogram (black and white point) when reducing a 16bit TIFF file from 7000px wide to let's say 1280px wide. CS5 does not using the same steps. Windows 7 ultimate 64bit - I7 -24GB RAM.
Anybody has had this issue? Is there a setting in CS6 to modify the reduction algo (binning, bicubic or other) that CS5 uses?

The CS6 factory-default of Bicubic Automatic results in Bicubic Sharper and Bicubic Smoother when reducing and increasing pixel count, respectively. Sharper tends to create hideous oversharpening halos (hence the observed clipping in the histogram) but, hey, Adobe says that's best [rolls eyes].
Change the default resampling to plain Bicubic in Preferences > General.
Note that CS6's Transform mode has an independant resampling control in Options bar when a raster layer is targeted. The default for that is Bicubic Automatic so you probably want to set it to plain Bicubic, too.

Sound quality in videos windows 8.1 64bit

Upgraded to Windows 8.1 64bit and since then..songs play great..but the videos I purchased sound REAL bad..completely unrecognizable but the video plays good.
I have all the latest updates, upgrades, and sound drivers for the system.
Any ideas?

Hi，
Could you check this issue under clean boot?
Also try this fix tool it repair corrupted registry keys.
https://support.microsoft.com/en-us/mats/program_install_and_uninstall
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Feedback GPU - windows 8.1 - 64bit PS CS6 extended OK

Similar Messages

Maybe you are looking for