Problem with DNG conversion of Panasonic FZ-200 .RW2 file?

When I convert a Panasonic FZ-200 .RW2 raw file using DNG Converter 8.6 on Windows 8.1 64 bit, I get a warning from ExifTool of "Invalid DistortionInfo." Looking at the ExifTool source code, this happens when the length of the block containing the distortion information is not 32 bytes in length (which it is in the .RW2 file).
This indicates to me that the DNG converter is not correctly rewriting some of the metadata correctly.
Can anybody else reproduce this, and is this the proper forum for reporting this problem?

I am seeing the same thing, both with the standalone DNG Converter 8.6 and DNGs saved from ACR 8.6:
My question would be whether the DistortionInfo is supposed to always be 32-bytes according to some current standard or if there is somewhere else in the file that says how long the DistortionInfo area actually is so it's fine that it's not 32-bytes. I mean is the DNGC doing something wrong or is EXIFTool too inflexible.

Similar Messages

Problems With Data Alignment when spooling to a CSV file

Dear members,
I am spooling data to a csv file. My data contains 3 columns
For example :
col1 col2 col3
USD,10000033020000000000000,-1144206.34
The 2nd column is alphanumeric, it contains some rows which have only numbers and some which have numbers and alphabets.
The 3rd column contains only numbers with positive or negative values.
I am facing problem with alignment. when i open the spooled csv file then i find that the 3rd column is aligned to right .
In the 2nd column, rows which have only numbers are right justified and rows which have alpha numeric data are left justified.
I tried using the JUSTIFY function in sql plus but still it is not working for me.
Can any body give your opinion on how to control the alignment in spooled csv files.
Your responce is highly appreciated.
Here is my code :
WHENEVER SQLERROR CONTINUE
SET TIMING off
set feedback off
set heading off
set termout OFF
set pagesize 0
set linesize 200
set verify off
set trimspool ON
SET NEWPAGE NONE
col to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ALIAS CONCATENATED_SEGMENTS
col CONCATENATED_SEGMENTS justify left
col to_char(decode(glbal.currency_code,glsob.currency_code,
(begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq))) alias Total_Functional_Currency
col Total_Functional_Currency justify left
COlUMN V_INSTANCE NEW_VALUE V_inst noprint
select trim(lower(instance_name)) V_INSTANCE
from v$instance;
column clogname new_value logname
select '/d01/oracle/'|| '&&V_inst' ||'out/outbound/KEMET_BALANCE_FILE_EXTRACT' clogname from dual;
spool &&logname..csv
SELECT glsob.currency_code ||','||
to_char(glcd.segment1||glcd.segment2||glcd.segment3||glcd.segment4||glcd.segment5||glcd.segment6) ||','||
to_char(decode(glbal.currency_code,glsob.currency_code,
(begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr),
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)))
from gl_balances glbal , gl_code_combinations glcd , gl_sets_of_books glsob
where      period_name = '&1' /* Period Name */
and      glbal.translated_flag IS NULL
and      glbal.code_combination_id = glcd.code_combination_id
and      glbal.set_of_books_id = glsob.set_of_books_id
and      glbal.actual_flag = 'A'
and      glsob.short_name in ('KEC-BOOKS' , 'KUE' , 'KEU','KEMS', 'KEAL' , 'KEAL-TW' , 'KEAL-SZ' , 'KEAM')
and glcd.segment1 != '05'
and decode(glbal.currency_code , glsob.currency_code , (begin_balance_dr - begin_balance_cr) + (period_net_dr -period_net_cr) ,
(begin_balance_dr_beq - begin_balance_cr_beq) + (period_net_dr_beq -period_net_cr_beq)) != 0
and glbal.template_id IS NULL
ORDER BY glcd.segment1 || glcd.segment2 || glcd.segment3 || glcd.segment4 || glcd.segment5 || glcd.segment6
spool off
SET TIMING on
set termout on
set feedback on
set heading on
set pagesize 35
set linesize 100
set echo on
set verify on
Thanks
Sandeep

i think you do not have to worry about your code when you say that the plain texts created are ok when opened on the notepad. it is on the excel that you will need some adjustments. not sure about this but you might want to read about the applying styles in the excel by going through it's help menu.

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

TS3297 My downloaded song stops suddenly halfway through. I assume there was a problem with the download. Can I download the file again??

My downloaded song stops suddenly halfway through. I assume there was a problem with the download. Can I download the file again?? Will I have to purchase the song again?

You need to delete the current copy of the broken track from your library before it will be offered up for download. It may help to close and reopen iTunes.
If the problem persists and you can't get a good version of the file contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2

Support for Panasonic GH4 RAW (RW2) Files?

Any word on support for Panasonic GH4 RAW (RW2) files? They load into Aperture (and Photoshop, too) with the dreaded "unsupported image type" alert.

The GH4 comes with a software disc that includes SILKYPIX Developer Studio 4.1 SE for Mac & PC. Installing the software seems to also install the Panasonic Raw 2 Image Plugin. Once the software was installed, I was able to open the RW2 files shot with the GH4 in iPhoto, Lightroom 5 and Preview. After SILKYPIX Developer Studio 4.1 SE is installed, the RW2 preview images also appear in Finder.
I was not able to find the software on the Panasonic web site, so if you are installing on a new Mac without a CD/DVD drive, you'll need to use Remote Disc.

Problem with type conversion and primary key during row fetch

[Note, this error occurs in Oracle XE, APEX 2.1.0.00.39]
I have been having a problem with Automatic Row Fetch:
ORA-01460: unimplemented or unreasonable conversion requested
So in an effort to resolve this, I created a PL/SQL process with the query below and was able to isolate the same error. The problem seems to come from one of the primary keys being a "number" type (APP_ID). The error occurs on the line:
where u.app_id=:P5_APP_ID
I have tried the following variations on this line in an effort to resolve this, but all generate the same error:
1) where to_char(u.app_id) = :P5_APP_ID
2) where u.app_id = to_number(:P5_APP_ID)
3) where to_char(u.app_id) = to_char(:P5_APP_ID)
I've also tried the laternate syntax "&__." and "#__#", but these don't function in the Source field and show up as syntax errors.
Any suggestions are welcome.
begin
for r in (
select app_name, apptype, appcreator, appurl
from application_users u, application_info i
where u.app_id=:P5_APP_ID
and i.app_id=u.app_id
and u.username=:P5_USERNAME)
loop
begin
:P5_APP_NAME := r.app_name;
:P5_APPURL := r.appurl;
exception
when others then
raise_application_error(-20000,'In Loop Failure',true);
end;
end loop;
exception
when others then
raise_application_error(-20000,'Out of Loop Failure',true);
end;
Thanks in advance,
Barney

I found a prior post referencing a similar issue and it was solved by using the "v(__)" syntax. This did resolve my issue, however, I have a quick follow-on which I'm hoping someone can answer quickly...
Since the "v(__)" syntax won't work for the Automatic Row Fetch (at least to the best of my knowledge), I have to do a manual process. However, the manual query as shown above doesn't actually populate any of the form values through the bind variables. They all remain at their cached values from prior data entry on the form.
Is using the bind variables for assignment incorrect, or is there something that must be done to get the updates to show up in the form (ordering of processes, etc.).
My manual process is running in the Load: Before Header state so I would have expected it to update all of the fields.
Thanks in advance,
Barney

Problem with DNG Color Profiles in Lightroom 5.4

Hello folks,
I recently updated from LR 5.3 to Lightroom 5.4 and since then I am having problem when using dng color profiles which were created with Colorchecker Passport. Every time I use such a profile which was created for my Nikon D 800 I get very greenish tones in the pictures.
I use Windows 7 Pro on a HP Z 210 Workstation. The monitor is a hardware-calibrated Quato which was recently calibrated.
Does anyone have this problem too and - if yes - know how to fix it?
Thanks!
Yours, Albert
PS: As English isn't my mother tongue I apologize for any mistakes in the text above.

Hello Andrew,
I do have a Nikon D 800 and a Fuji X-E1. I haven's noticed a problem with the Fuji so far. I think I will recalibrate my monitor tomorrow and see if the problem still exists.
I can supply raws and DNG profiles but I don't know where I should upload them - I suggest I could do it on my own webspace. Would that be ok?

FCC: Problems with content conversion

Dear all,
I have a receiver FTP adapter with content conversion. In RWB I'm facing following error message:
Adapter Framework caught exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'FCOTUPI')', probably configuration error in file adapter (XML parser error)'
The field with value FCOTUPI could be found in POS recordset. I double check the length of columns but couldn't find
an error.
CC configuration:
Recordset structure: HEADER,POS,SUBPOS
HEADER.fieldFixedLengths = 8,4,8
POS.fieldFixedLengths = 8,20,15,3
SUBPOS.fieldFixedLengths = 5,5
HEADER.fixedLengthTooShortHandling = Cut
POS.fixedLengthTooShortHandling = Cut
SUBPOS.fixedLengthTooShortHandling = Cut
As you can see by the names, I am using as XML to convert a structure with subnodes. In documentation it said
that it is not allowed, but in some threads I found the information that structure could be processed.
Any ideas how to solve this problem?
Thanks
Chris

Dear Amit,
thanks for your answer. I already checked this blog, but hoped for other solutions.
My problem: I tried to map my hierarchical structure to a flat structure.
Source
Struc1 (0..unbounded)
-Item1.1
-Struc2 (0..unbounded)
--Item 2.1
--Struc3 (0..unbounded)
---Item3.1
Target:
Struc1 (0..unbounded)
-Item1.1
Struc2 (0..unbounded)
-Item 2.1
Struc3 (0..unbounded)
-Item3.1
But if e.g. the Struc2 appears two time it will be created two time in target structure before
the Struc3 is created. But ths Struc3 belongs to Struc2 and should be created in flat file under
Struc2 directly.
How can we created a flat structure like this
Struc1
Struc2
Struc3
Struc3
Struc2
Struc3
Thanks
Chris

Problem with Color conversion ADM_Color to AI_Color

Hello friends,
I think this is going to be the first post in this "Illustrator SDK Forum".
I am having problem with 'Setting Art Work Colors'.
I am trying to get the color value from the user through a ADM dialogue window, using the function
sADMBasic->ChooseColor();
The function is returning color in
ADMRGBColor structure, whose members (
red, green, blue) are of the type
'short'.
Now, I want to print a rectangular box art filled with that 'user selected color'.
But the color I have with me is in the
ADMRGBColor(each member of type 'short') and to draw that on a illustrator file, I need the type
'AIThreeColrStyle'(each member is of the type AIReal).
I had no idea how to convert
ADMRGBColor to
AIThreeColorStyle, but after lots of 'trial and errors', I arrived at this 'crude' solution.
ADMRGBColor value was in the range
0-65535 and
AIThreeColorStyle was in the range
0-1
aiPathStyle.fill.color.c.rgb.red = ((float)admColor.red)/65535;
This conversion was working fine on Windows, but on Mac its giving weird results. Can some one tell me the proper solution for this conversion problem?
Thanking you,
Vijoy~
And thank you Adobe for givig us this "Illustrator SDK Forum".
Forums Operations "Why there is no SDK forum for Illustrator?" 12/13/04 4:21pm

The code above seems to work for me. I get the proper values in the rgb fields of the AIPathStyle struct. Are you sure you are filling in the remaining values in the struct (like fillPaint, overprint, etc.) with appropriate values?
Hope that helps,
-Frank

Big problem with DNG converter

Hi
I would like to convert all my RAW CR2 canon to DNG (The format RAW CR2 change every time) and work with my PSE
I downloded DNG converter 6.5 and make a test but there is a big problème, the date of the .dng is not the date of the RAW, it's date of the convert...for me, it's impossible i want keep the original date.
Please, could you help me......
Thanks
René

rene_ladole wrote:
The problem is that the file date is changed by dng converter, when I want to rename the file with DNG as a parameter of the date of creation of the photo, the renamer is in the name of the date of creation dng, it can not go to my ranking of my photos ....
There are three potential dates with a digital capture, the Date/Time the file was created, the date/time the file was modified and the EXIF metadata Date/Time Original which is recorded by the camera at the moment of exposure. It is this final Date/Time that you would want to use in a name. Any time you create a new file–which is what DNG Converter is designed to do, you'll get a new date/time of that file's creation. That's not something the DNG Converter can change. If you take the DNG into ACR/Lightroom and modify the settings, you'll get a new date/time of the modification. However, the EXIF metadata will still correctly indicate the moment the capture was created in the EXIF Date Time Original tag.
So, what are you using to rename the files? If you are using Bridge to rename the file, the Date Time option when set to Date Created should be using the EXIF Date Time Original tag as the source of the date/time. Other apps should also be able to be set to use the EXIF Date Time Original tag.

Problems with Quicktime Conversion, FCE2

I am having problems using quicktime conversion. I want to export a 4 minute sequence into uncompressed AVI.
Each time i do this i get an almost 4 gb file that is only the first 18 seconds of the sequence. (when i export to WMV I get the same problem, except its 30 seconds)
I can export using compressed AVIs (such as DV-PAL), but the quality is not too good.
I am simply trying to get the best quality and most-universally useable file to write out onto a data DVD.
Any ideas/suggestions anyone?
I have am using a PowerPC G4 laptop, FCE2, OSX tiger....
Further problems: when i write this movie out to DVD with iDVD, and when it is in NTSC setting, black white lines appear on top of the black background parts in the movie, rather sporadically. I have written it out 3 or 4 times, and each time the frequency of the lines is different, but each DVD is unusable. In PAL setting this doesnt happen, but of course the quality is diminished, as the orig. footage was taken on an NTSC camera. I am in Europe, so this PAL/NTSC conversion thing is a neverending problem.... Is this an iDVD problem or a problem with my laptop's burner?
Daniel

Dear Tom,
I appreciate you replying to my post, and am sorry for not getting back to you sooner, but i never received an email notification of a reply.
The Nattress solution seems like a good route - is this compatible with FC Express 2?
The purpose of this AVI export is to have the highest possible quality file in data form, which the (PC using) client will then be able to write out onto DVD, convert/edit himself, etc. I have written out the self-contained QuicktimeMovie data file for him, but he is unable to open that. When i write out the AVI file, it is over 4 times as big as the QTmovie file and only plays for the first 18 seconds.
I am exporting to my internal harddrive (laptop).
The end goal is to get this file eventually onto a PAL-BETA video. This is where the NTSC-PAL conversion problem comes in, and maybe the Nattress program could be the solution (although it initially seems a bit complicated to me).
Another important part of this problem, is that iDVD writes out the original NTSC file with funny white lines going across the black backgrounds - so I cant write the best quality NTSC video onto DVD properly either. Each time I write it out, the frequency of these white lines is different. I dont know if this is a related problem, a Final Cut Express export problem, an iDVD problem, or a problem with my DVD writer. (I made the movie, exported it self-contained QTmov, imported it into a new file, did some color-correction, and exported the new final version. - maybe the problem stems from within this simple process? ? ? )
(Regarding the WMV export: this is not so important, lets not deal with this now. I have flip4mac, downloaded free. My experience is that it doesnt really work.)
So... any ideas or suggestions?
i appreciate your help,
Daniel

Problem with date conversion

I have read some topics about it, but still have problem :-(((
When I insert data, I don't have any problem with a date. It looks like this:
     Statement stmt = con.createStatement();
          stmt.executeUpdate("BEGIN " +
                    "INSERT INTO employee VALUES (" +
                    "employee_t(idnum.nextval,'John','Double'," +
                    "to_date('21.01.1975','DD.MM.YYYY'), 20000))" +
                    "END;"); Now I am trying to update, and get the error:
String query = "BEGIN UPDATE employee SET " +
"first_name ='"+getJtxtfldFirst_name().getText()+"', "+
"last_name = '"+getJtxtfldLast_name().getText()+"', "+
"date_of_birth = to_date('1982-03-11','YYYY-MM-DD'), "+
                                 "END; ";
Statement stmt = con.createStatement();
               int rs = stmt.executeUpdate(query);
               stmt.close();The error:
java.sql.SQLException: ORA-06550: line 1, column 149:
PLS-00338: unable to resolve "DATE_OF_BIRTH" as a column or row expression
ORA-06550: line 1, column 7:
PL/SQL: SQL Statement ignoredI have tried different variants, tried to parse... Just can't find where I make the error.
If I comment this line, with a date, there are no any exceptions.
This code in sqlplus works fine.

And besides that, you don't need to wrap your SQL
with the PL/SQL "BEGIN" and "END" tags; why invoke
the PL/SQL parser if you're not using any PL/SQL
features?
I suspect your underlying problem is that the column
isn't actually named "date_of_birth".You are quete right. It was my faulf. There was a field date_of_birthday. The oracle could say it more preciesly.
With the statement it works fine also.
Thank you for the answer and sorry for disturbing, I have forgotten to update the database and was sure I copied the new files... But updated the old one.

Dynamic file name in receiver - empty line problem with content conversion

Hi,
I do a variable substitution from a filename node in my xml structure. Because I don't want to have the the filename in my flatfile i supress the output with the conversion parameters:
filename.fixedLengthTooShortHandling = Cut
filename.fieldFixedLengths = 0
It's working but: the adapter is puting an empty line at the end of the file. If I even put the filename node at the top of the xml struture it generates the empty line at the top of the flatfile.
Anyone has an idea? is there an other way to set the filename or how can I supress this empty line( I have to) ?
Regrads
J.

Jorg,
Actually speaking we cannot get rid of this with XI. You have to write a OS script to remove this.
Else
you add one more parameter as .endSeparator as backspace ie., 0x08. It will definitely remove the line but I think it is putting a square box at the end of previous line. Please check by giving this and let us know the updates.
Regards,
---Satish

C7 problem with OVI suite and Outlook exchange 200...

Hello,
I'm now own a NOKIA C7 and need to switch to OVI suite, PC suite is not supported for this handy. OVI suite is not synchronizing my contacts from exchange to my C7.
With my old N73 and PC suite I did not have the problem on my DELL M4400 notebook.
What I've found out, in case of using a USB cable connected nothing was able to synchronize,
no contacts, calendar and Notes. The OVI suite did nothing for 15 minutes, only searching for somewhat.
Crazy is, in case of using a Bluetooth connection (removed the USB connection), it was possible to synchronize the calendar and Notes, but contacts were still not possible, some issue as before.
We verified this problem, using a NOKIA N8 from a colleague - exactly same happened.
I was happy to have at least the calendar synchronized, because I need this for my job.
Nevertheless the contact synchronization issue need to be fixed...
I've bought the C7 with symbian, because I expected no problems in compare to other available Handy Companies and now this...
My personnel opinion, the OVI suite is currently not was the people expecting - support for consumer people and flexible for business people. For me PC suite was much more, what I need.
Now, I'm waiting for support to fix my problem...
Best regards,
Onecent59
Solved!
Go to Solution.

Hello Joyfeal,
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59
Hello Joyfeal,
I never had problems with my old N73, using PC suite - this worked well over years.
I did, what you proposed. Completly uninstall all. Afterwards, I did a registry cleaning and program files cleaning, so nothing from th e PC suite and Ovi Suite was longer on my Notebook.
Next step was reinstalling OVI suite, including cable and BT driver - this was resulting nearly the same - advantage was only, that I can now use BT and USB to update Calender, tasks and notes.
Strange is, that when I try to sync the CONTACT data, and I let first searching for Outlook folder, it takes about 4 minutes, it finds the right folder, I click and mark this, but then OVI suite is not longer remember the selection (so it seems for me to be) and try succesless to sync the CONTACTs.
I've tried so much - no success. I've a lot experience in software - but no idea, what I can try out more. I guess, there must something be with Outlook 2007 and Exchange server usage, which worked with PC suite.
I've talked with a few guys in my company (R&D area) and all told me, that they like the new N8 and C7-00, but they hate the OVI suite - it´s designed for kids and hobby user, but not for professional usage - my opinion is, that PC suite was much clear in use. OVI suite has some feature I like, but I expect to have such kind of problems fixed. The C7-00 is not a cheap handy, so I can expect this.
...now I wait for help or software update...
Regards,
OneCent59

Troubleshooting problems with printing PDF's from Revit and Cad files

I am unable to print a readable pdf from AutoCad and Revit. Any Suggestions? I do not have problems with Microsoft or Adobe products..Just AutoCad. I have already spoken with my AutoCad dealer and they concluded it was an Adobe issue.

How was the PDF file created? With the Adobe plug-in to AutoCAD?
If you can provide some samples, we could look at the files and determine the problem. And FWIW, I doubt that your AutoCAD dealer has the competence to conclude where the problem is with a PDF file.
- Dov

Problem with DNG conversion of Panasonic FZ-200 .RW2 file?

Similar Messages

Maybe you are looking for