Problem with Dynamic Header setting with SOAP Adapter

Hi All,
I'm trying to set SOAP Action dynamically. However, in some systems it's not working. I tested perfectly in one system.
Right now I'm using PI service patch 14. Is it a bug in this pack? or anything needs to be done to enable this concept?
Thanks

Hi,
What kind of errors do you get ? And maybe a code snippet would be helpful ...
Rgds
Chris

Similar Messages

HTTP Header fields in SOAP adapter - Part 2

Hi All,
With regards to my previous thread HTTP Header fields in SOAP adapter
my header issue is solved and hence I have closed the thread but still I am not able to make the connection successful. The new problem is below
My vendor requirement is to specify the header as "Ent-sender" but when we give the same in XI in communication channel it automatically convets into uppercase "ENT-SENDER". Due to case-sensitive in vendor server the connection is not gettingestablished.
Please help me out how to solve the problem.
Note: Sorry for the new thread as it was created due to new problem and also the previuos thread is already too long.
Regards,
Dhill

Hi Neaves,
Thank you, I jave seen the note and find the below solution will be some what realated to my prblem.
The nosoap mode lets the adapter send the XI payload directly without wrapping it in the SOAP envelope. Although the main use of this mode is to send some plain text content directly to some web server, one can use this mode to send their own SOAP message (e.g., with arbitrary headers) to an external web service (See related questions). In this case, the XI payload must be formatted in the SOAP envelope.
To use the nosoap mode, the channel must be configured to use no SOAP envelope.
If yes, can you please let me know how to use nosoap mode otherise let me the other possibilities. I am already using tcpg2.zip to trace the SOAP adapter in which it was confirmed that XI is changing the header automatically into CAPS whatever case we give,
Regards,
Dhill

Setting interface name dynamically from client for SOAP Adapter...

Hi,
does anyone have experience in setting the sender interface name in the HTTP-SOAP request dynamically? I have followed the instructions in "How To Use the XI 3.0 SOAP Adapter" on page 17 (see also SAP Note 856597) which say:
"If you select Use Encoded Headers and Use Query String,
[...]The sender SOAP adapter creates the XI message header according to the
information provided in the query string. [...] In the sender SOAP adapter, you can use only some of the parameters, but the first
parameter must always be the version. For example, you send from the Web service client to the following URL: http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>&version=3.0&Interface=http%3A
%2F%2Fsap.com%2Ftest%5ETest
This will overwrite the default interface and namespace of the sender channel."
This is exactly what I need! However, what I actually get as a response following this description is a SOAP:Fault with a java.lang.StringIndexOutOfBoundsException: String index out of range: -1.
Has anyone got this to work properly?
Thanks in advance.

Thank you for your input. I am using the following format for the call (with "x" standing for one letter each):
http://xix.xxx.xx.xxx:5xx00/XISOAPAdapter/MessageServlet?channel=:xx_xxx_xxx_xxxx:xx_xxx_x_SOAP_S&version=3.0&Interface=http%3A%2F%2Fxxxxxxxx.xx%2Fxxxxxx%2Fxxxxxxxxxxxxxxxxxxxxxxxx%5Exxxxxxxxxxxxxxxxxxxxxx
Anything wrong with that? With unchecked "Use Encoded Headers" and "Use Query String" it works fine (default interface) but as soon as I set these flags I get the SOAP-Fault response.
We are on XI 3.0 SPS18.

How to create dynamic DataTable with dynamic header/column in JSF?

Hello everyone,
I am having problem of programmatically create multiple DataTables which have different number of column? In my JSF page, I should implement a navigation table and a data table. The navigation table displays the links of all tables in the database so that the data table will load the data when the user click any link in navigation table. I have gone through [BalusC's post|http://balusc.blogspot.com/2006/06/using-datatables.html#PopulateDynamicDatatable] and I found that the section "populate dynamic datatable" does show me some hints. In his code,
// Iterate over columns.
 for (int i = 0; i < dynamicList.get(0).size(); i++) {
 // Create <h:column>.
 HtmlColumn column = new HtmlColumn();
 dynamicDataTable.getChildren().add(column);
 // Create <h:outputText value="dynamicHeaders"> for <f:facet name="header"> of column.
HtmlOutputText header = new HtmlOutputText();
header.setValue(dynamicHeaders[i]);
column.setHeader(header);
// Create <h:outputText value="#{dynamicItem[" + i + "]}"> for the body of column.
HtmlOutputText output = new HtmlOutputText();
output.setValueExpression("value",
createValueExpression("#{dynamicItem[" + i + "]}", String.class));
column.getChildren().add(output);
public HtmlPanelGroup getDynamicDataTableGroup() {
// This will be called once in the first RESTORE VIEW phase.
if (dynamicDataTableGroup == null) {
loadDynamicList(); // Preload dynamic list.
populateDynamicDataTable(); // Populate editable datatable.
return dynamicDataTableGroup;
I suppose the Getter method is only called once when the JSF page is loaded for the first time. By calling this Getter, columns are dynamically added to the table. However in my particular case, the dynamic list is not known until the user choose to view a table. That means I can not call loadDynamicList() in the Getter method. Subsequently, I can not execute the for loop in method "populateDynamicDataTable()".
So, how can I implement a real dynamic datatable with dynamic columns, or in other words, a dynamic table that can load data from different data tables (different number of columns) in the database at run-time?
Many thanks for any help in advance.

flyeminent wrote:
However in my particular case, the dynamic list is not known until the user choose to view a table. Then move the call from the getter to the bean's action method.

Pairing iPod touch with Bluetooth head set

I have a Gen2 iPod touch and just bought a bluetooth head set to use with skype but when I turn on Bluetooth it wont discover it and I know the headset works because it pairs with my computer.
I bought the os upgrade when it came out and just updated the software, I also restarted the iPod. the only thing I haven't done is restore the iPod which I wanted to avoid.
Anyone had this problem before? Any ideas of how to fix this?

Assuming Nissan says it will work with an iOS device with iOS 8:
- Reset the Nissan system
- Reset network settings on the iPod: Settings>General>Reset>Reset Network Settings. You will have to rejoin wifi networks and re-pair all BT devices
- Go to Nissan's support site
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Note that sometimes an iOS update breaks compatibility.

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

Section Break conflicts with Dynamic Header in RTF which loads XML data

Hi,
I have dynamic header in my rtf file which loads data from XML generated by rdf file.
I have section break on start group of body. but it does not display dynamic header value. If i remove section break then it display dynamic header.
I have to display dynamic header and section break is also required there.
Please give me solution of this issue.
Regards
Farooq
Edited by: user8849418 on Jun 27, 2012 12:05 AM

flyeminent wrote:
However in my particular case, the dynamic list is not known until the user choose to view a table. Then move the call from the getter to the bean's action method.

HTTP Header fields in SOAP adapter

Hi All,
I have a scenario IDoc to SOAP adapter. In which my receiver given the details as
URL : https://b2b.ecsc.us.gxs.com/invoke/GXSGateway:receiveCTE
Header Name: Header Value
Ent-sender xxxx
Ent-receiver yyyyy
Ent-APRF zzzzz
Ent-filename (not sure what data need to give)
1. I request you to let me know where I need to give these headername and hader values in soap adapter.
2. my client require file as an attachment. Please let me know how I need to send the payload as an file and where the name need to be given in the header name (Ent-filename).
Currently I used MessageTransformBean to conver my XML to text structure(flatfile structure).
Please let me know if any more details required
Regards,
Dhill

Was out for lunch break..
Juz Rechecking
Transport Protocol : HTTP
Message Protocol: Soap 1.1
Adapter Engine -> Adapter Engine on the Integration Server
Connection Parameters
Target URL - > https://b2b.ecsc.us.gxs.com/invoke/GXSGateway:receiveCTE
Sure about no sever authentication required and they are not using any HTTP proxy for webservice >????
Conversion Parameters
Do Not Use SOAP Envelope -> Unchecked
Keep Headers -> Checked.
Keep Attachments -> Unchecked
Use Encoded Headers -> Unchecked
Use Query String -> not so sure might be Unchecked
Authentication Keys
If authentication is required for the receiver system, you can enter a password and a confirmation for each key value. This means that you do not need to write passwords in the enhanced message header.
If you want to specify or display authentication keys, select View Authorization Keys.
You can enter and confirm passwords for each authentication key value (TAuthKey or TproyxAuthKey).
Try once sending the message with Adapter-Specific Message Attributes
Unchecked. See if there is a hit.I knw itz not req but juz testing.
Yeah adapter stat must be active.
Last thing need to go through the whole scenario.
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Extension of Standard SOAP Header Information in SOAP Adapter

We are currently trying to call an eBay Web Service via SAP XI and we are using the SOAP Adapter in XI to achieve this.
The following Authentication Information is required in the SOAP Header for accessing the eBay Web Service:
- Token
- ApplicationID
- DevelopmentID
- CertificationID.
Unfortunately, the standard SOAP Adapter supports only certain SOAP Header Information (like User Authentication or Certificate Authentication).
Is it possible to extend the SOAP Header Information in the SOAP Adapter (or somewhere else in XI) beyond the standard configurations?
Thanks for your support.
Alexander Bange

Hi Jin,
thanks for your input and sorry for my late reply but I wanted to wait for feedback from SAP who actually confirmed your recommendation.
I had a second thought about this and it came to my mind that I actually don't want to extend the SOAP Header elements but simply fill the mentioned authentication elements with values. This cannot be done in the message mapping as only the SOAP body elements (i.e. the payload) can be mapped.
Do you know if and how I can fill the SOAP header elements with values in XI?
I already tried to include this information as fixed values in the WSDL description and load it into XI. Then I looked into the WSDL description and an error message occured stating that XI could not parse the XML Document (Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(:main:, row:18074, col:54)).
If there is no solution for the latter, I will have to try nosoap solution. Still this would be a little awkward.
Thanks again for your valuable support.
Best Regards.
Alex

How i use header fields in soap adapter

Hi Experts,
I need use header fields http in soap adapter receiver but i don't know where's the Variable Header
Do you know where i find this?
Somebody know how i put header fields http in soap adapter receiver?
Thanks for all,

It is similar like in this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Find in the online help the values for the SOAP adapter.
You can only add additional fields, you cannot influence the standard field like content-type and content-id.
Regards
Stefan

Help With Dynamically Linking Premiere With After Effects

Recently, I edited some video footage in Adobe Premiere, dynamically linked it with After Effects, and added several effects and transitions within the latter application. However, after I thoroughly finished with my effects editing, I wished to place my After Effects Composition once more into Premiere, but this task met to no avail.
Whenever I copied, dragged, or dynamically linked the After Effects project into Premiere, the footage showed up displaying either "Media Offline" or a series of colors that you sometimes see when a tv channel is offline. Now, I did read several posts describing the dynamic link as being only ONE WAY, but is there no possible way to move my After Effects composition back into Premiere? Or do I have to start from scratch by copying the Premiere footage into After Effects, THEN dynamically linking it to Premiere?
Any help would be hugely appreciated!

Right, I realize that now, but that would require deleting the current dynamically linked After Effects project, right?
Also, I think the solution to my problem would be found if I could find a way to remove the dynamic link between After Effects and Premiere. Any ideas?

EOIO with dynamic queuename possible in SOAP sender ?

The customer has a requirement to pass a queuename parameter within its SOAP message, and our PI SOAP sender adapter (which must use QoS EOIO) should use that queuename. Apart from the question if that makes sense:
is that possible at all ?
If yet, what flags do I have to set in the SOAP sender adapter (query strring, keep attachments and so on) ?
PI 7.0
CSY
Edited by: Christian Sy on Jan 13, 2011 10:14 AM

Interesting. We tried that option before, but got the following strange exception, so we thought that is the wrong way. The sender is PI 7.1, the receiver is PI 7.0.
Is it a problem with the different versions, or a problem with the namespace name (e.g. the "Minus" character) ?
Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIServer/UNKNOWN/MalformedMessageException - Unexpected length of element <sap:Main><sap:Interface @sap:namespace> = http://abcde.com/rd/GL/PA/B2B/SU-OP_IF001-GL/PurchaseOrder/10; nested exception caused by: com.sap.aii.messaging.util.XMLScanException: Unexpected length of element <sap:Main><sap:Interface @sap:namespace> = http://abcde.com/rd/GL/PA/B2B/SU-OP_IF001-GL/PurchaseOrder/10 at com.sap.aii.messaging.mo.xmb.XMBMessageHeader.unmarshal(XMBMessageHeader.java:1184) at com.sap.aii.messaging.mo.Message.reparseRootDocument(Message.java:964) at com.sap.aii.messaging.net.MIMEInputSource.readSOAPPart(MIMEInputSource.java:624) at com.sap.aii.messaging.net.MIMEInputSource.decodePart(MIMEInputSource.java:616) at com.sap.aii.messaging.net.MIMEInputSource.readBody(MIMEInputSource.java:382) at com.sap.aii.messaging.net.MIMEServletInputSource.parse(MIMEServletInputSource.java:58) at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:390) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
CSY

Dynamic internal table with dynamic header

Hi Members,
I have created a dynamic report ie In the selection screen i will give set of GL accounts.
Based on the GL it will separate a col like Sales GL, PF GL , Discount Gl etc. In the header portion first 3 col is constant ie it will show the vendor name and material and text remaining col is based on the GL entered in the screen it will cumulate the Total Amount and display accordingly.
This is working fine in ALV grid display, but i required to download the data to excel , while downloading to excel i am getting only the values without header,
ie title of the each col not getting . kindly guide me to solve this issue.
If i entered only sales GLs (100,101,102 ) then my output should be
vendor material mateial text 100 101 102
ddddd 11100 Raw salt 2000 1000 2500
Regards,
Mee.S

Hi Meenakshi,
As per my knowledge two ways of doing it...
1. when u get the final internal table..check for the fields with not initial...again update the header internal table dynamically..
2. if you get GL or PF or any such thing you can hardcode the header and display it on to excel..
Regards,
Vamshi

Dynamic Columns with dynamic header colspans

Hi All,
Our project requires creation of dynamic data table at runtime. Following are the requirements.
1.The number of columns and column headers should be dynamic. Basically the column headers are the Month names.
2.Some or All of the above displayed months can be further split into 3 columns based on further values selected by the user. The months to be split into 3 columns will be identified only at runtime based on some calculations. When this happens, that particular month header should span 3 columns and an additional header for the 3 split columns have to be displayed. Check the screen shot below.
----------------------------------------------------------------------------------|-------------|
Year: 2008 | Year: 2009 |
----------------------------------------------------------------------------------|-------------|
|Current Month | | |
-------------------------------------|--------------|-----------------------------|-------------|
Sep | Oct | Nov | Dec | Year Total| Jan |
------------------|------------------|--------------|-----------------|-----------|-------------|
| | |2008 |2009 |Total| | |
------------------|------------------|--------------|-----|-----|-----|-----------|-------------|
Old |New |Total|Old |New |Total | | | | | | |
Value|Value | |Value|Value| | | | | | | |
-----|------|-----|-----|-----|------|--------------|-----|-----|-----|-----------|-------------|
xx | xx | xx | xx | xx | xx | xx | xx | xx | xx | xx | xx |
-------------------------------------------------------------------------------------------------Points to be noted:
1.The colspan for the Year header is dynamic based on the months displayed for the previous, current, next year.
2.The ‘Current Month’ header is dynamic based on the month selected in the drop-down.
3.The colspan for the month is dynamic based on whether it is displaying single column or 3 columns
4.The header for the 3-column split is dynamic based on which are the months to be displayed with 3-column split.
5. Irrespective of the month selected, DEC is always split into 3 columns.
Is this achievable in JSF? Please let me know if anyone has worked on a similar requirement.
Thanks and Regards,
Anitha.

Hi charishma/Raymond,
Thanks for your response.
charishma,
I checked the link you provided and the code in that page. For me it looks like the colspan and rowspan are set by the user. Can it be done dynamically? I am still not in the development phase. I am still evaluating the possibilities. So it would be great if you can tell me if my requirements will be met with rich faces.
Raymond,
I am still in the evalution phase of whether this requirement is possible or not?
In short, my requirement is to display columns dynamically. Based on certain conditions, each of the column can be further split to 3 more columns with 3 sub-headers below the main header. There are 4-5 rows of headers available for which the colspan has to be calculated dynamically depending on the total number of columns.
The columns should be editable. i.e., the columns contain textboxes where the user can enter data. Again, the editable columns and non-editable columns are determined at run-time based on certain calculations.
Is this possible? If not, i need reasoning as to why it is not acheivable.
If it is not at all posible then the client is ready to compromise on the editing part. That is, data entry can be in a pop-up whereas, the the datatable should just display the data dynamically so as to print it for a report.
Please let me know the possibility of this requirement.
Thanks and Regards,
Anitha.

Strange Problem in dynamically list population with record group

Hello Room,
I am dynamically populating a single list with 2 record groups. I am having a strange problem. All the code are written in 2 seperate buttons. The code of every button is given below.
Button 1 code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT companyname,to_char(co) from companymaster order by companyname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
Button 2 Code:-
DECLARE
rg_reports RECORDGROUP;
rg_name VARCHAR2(40) := 'REPORTS';
vTemp NUMBER;
BEGIN
-- Pls make sure Group doesn't already exist
rg_reports := FIND_GROUP(rg_name);
-- If it doesn't exist then create it and add ur query to it
IF Id_Null (rg_reports) THEN
rg_reports:=CREATE_GROUP_FROM_QUERY(rg_name , 'SELECT accountname,to_char(co) from accountmaster order by accountname');
end if;
--Populate the Record Group
vTemp:=POPULATE_GROUP(rg_reports);
POPULATE_LIST('REPORTS.EXAMPLELIST', rg_name);
Delete_Group( rg_reports );
END;
The code is same here only the sql is different in these 2 buttons. Now the problem point.
when i press button 1, I get the list populated ok. when i try to click on the list item and keep the button pressed the list gets scrolled properly.
when i press button 2 after that i get account names well populated in the same list item as well, but this time, when i keep the button pressed the list does not scroll below as in button 1. It does not even allow to select different item from the list of button 2 code.
I tried to clear cache, cookies, exit browser everything and try to run the button 2 first, but still the problem in button 2 code.
Following are my system details.
windows 7 professional edition.
Oracle database 11g on windows 7
Oracle forms 10g patchset 10.1.2.0.2 on windows 7
Browser Netscape Navigator with oracle jinitiator 1.3.1.22
But this form is run by a client side html file where oracle forms 10g is not installed on windows xp. html file is just referring server url to run the module. The file is run on Netscape navigator browser with oracle jinitiator 1.3.1.22
My question is that is this a bug ? if button 1 gets the list item scrolled, why is the problem with button 2 even though i press it first. Here I am deleting the record group also. after the code is over. Initially I thought this may be the character length problem so I took the maximum character length for that list item as given by the 2 columns in database.
Why is the list scrolling not happening in button 2 but in button 1 with same codes on both ?
Anybody please help me.

The problem is the second query. I would guess that the TO_CHAR(co) is not unique for each account, but is the same for the accounts. And as the second item in the select-list is the listitems values, all your listitem-entries have the same value. therefore, of you select any entry, the list will always go the the first entry again.
Adjust your query.

Problem with Dynamic Header setting with SOAP Adapter

Similar Messages

Maybe you are looking for