Problem with employee enqueue

Hi guys,
I have a problem with an ENQUEN_EMPRELE (enqueue employee)...
I make a BDC call, and after that a need to enqueue that employee because i need to make other actions in the employee... But a FM ENQUEUE_EMPRELE return that the employee is locked..
Is it a syncronism problem?
How can i solved it?
Thanks in advance,
LMS

Please check the spelling of your FM. You have spelled it three different ways in this thread. Do you mean ENQUEUE_EMPREL ?
If so, try specifying
_WAIT = 'X'
Rob
Edited by: Rob Burbank on Oct 13, 2009 12:09 PM

Similar Messages

Problem with AS2 Enqueue utility

Iam using the AS2 enqueue utility on 11.1.1.6.0 PS5 patch set.
I am trying to simulate a message posted from a third party partner to my host partner.
Below are the properties i used.
user=Correct Username
password=Pwd
url=jdbc:oracle:thin:@host:port/SID
####### Payload Details #######
replyToMsgID =
from=ABC
to=Host
#eventName=SampleEvent
doctypeName=ABC_ShipStatus_DocType
doctypeRevision=1.0
payload=/tmp/naveen/b2b/test.dat
the issue is , in the reports section, the message i push through utility is coming but with incorrect partner values.
i.e. My sender and reciever values are both coming as 'Host'.Hence my message is failing as it is not able to find the right TPA.
Below is the snippet of my report
Doctype TPA Sender Receiver
ABC_ShipStatus_DocType Host Host
But Iam expecting this
Doctype TPA Sender Receiver
ABC_ShipStatus_DocType ABC_ShipStatus ABC Host
Also, Iam having the AS2 Signing in my realworld TPA. Will the simulation through Utility require any signing to complete the message?

There is nothing like AS2 enqueue utility. What you are using is AQ (Advanced Queue) enqueue utility which is used to push outbound messages to B2B to simulate back-end -
http://docs.oracle.com/cd/E23943_01/user.1111/e10229/enq_deq.htm#BGECCIBG
You should set up another domain to mock the TP.
Regards,
Anuj

Re:problem with employeer pension contribution wage type /3f4

hi,
One of the the employee not calculating employeer pension contribution wage /3f4 even though iam maintain the master data
in infotype 0587 for him we are maintain PENSION TRUST ID ,PENSION NUMBER and also pension contribution details also.
but iam checked his date birth is 1948 his age is almost 61 years but pf wages are calculating correctly /3f1 ee cont and/3f3 er cont please any body knows the reason for not calculating employeer pension contribution let me reply.
regards,
mgr

Hi
For an employee who has attained 58 years of age ,there will be no pension contribution calculated.
Here the age of the employee is 61,therefore there will be no pension contribution
Regards

Problem with "Employee Schedule" template

Help!
I'm trying to use the Employee Schedule template and add some new values to the popup of times. Although they appear just as times like "5:00 PM", they actually seem to be date-times (on 15 Jul 2008, which I guess is when the template was created).
If I add a new value like "11:00 PM" it's taken to be today's date so the hours calculation is way out. If I type in something like "15 Jul 2008 11:00PM" then the calculation works but I see the date as well as the time!
Is there any way of changing the formatting of a cell that's of type "Pop-Up Menu" to only show hours and minutes?
-Rolf

Rolf,
If you want to add new values, change them all so they will all have the same date. You'll need to do this for both starting and ending times so the math will come out properly. When you've made a new pair of Pop-ups, copy them and paste them to all the locations where you need them.
Regards,
Jerry

Connection problem with Employee Information Demo

please check the following message:
XSQL Sample Not Working
thanks

Hi,
Reply has been posted for this question at the following URL:
XSQL Sample Not Working
Thanks
Shefali

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

The best cover is the one that suites your needs. Try Google. There are dozens on the market.
As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

Travel management - problem with post a trip for an employee in India

Hi,
I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
" Customization for 1600 j_1iindcus missing in table
Message no. 8I303" and when I have googled on that error message I found that I should go to:
IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
Please help. I have no idea how to come around this.
Best regards Lisa

Hi again,
In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
Regards Lisa

Why I had no problems with the VZW employees and other people have?

I think that most people who cannot resolve problems with the VZW have an attitude problem.
Wise saying: you can get more with honey than with vinegar.
Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
The third phone did not working how I expected.
Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM.
My account was credited and I was advise about the ESN number and activation.
Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.

Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone. My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade. I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
Samsung Sway is coming from …eBay – keep your fingers crossed for me.

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

Problems with using Deskjet 3745 on 2-PC home network

I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network connecting the PCs is on an ADSL router with to its own external Iomega network drive with a USB port.
To make the printer usable on both PCs,
I originally connected it to the Iomega USB port. But the port was effectively a 1-way connection only, so I could not get a print-preview to see which form/profile the printer was using. So I junked that and...
reverted to connecting the printer to one PC permanently and sharing it on the network. But the two PCs required different drivers which would not talk to each other, and the set-up simply would not work.
Finally I went back to the straightforward method of plugging the printer into the USB port of whichever PC I needed to us it on. That worked fine for a while until the WIN 7
print-preview started showing blank images (but printing correctly).
print-spooling failed to cope with cancelled documents.
I have had Deskjet Support's help in trying to sort this out, which including reinstalling the drivers on both PCs - several times! But I am still left with solution 3 giving problems with Win 7.
Has anybody encountered a similar situation and found a satisfactory working solution?
This question was solved.
View Solution.

Try the following: connect the printer to the XP machine and set the XP machine to share this on the network. On the Windows 7 machine go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select the HP (not Hewlett-Packard) Deskjet 3740 series (LiDiL).
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem with Drag and drop in panel dashboard

Hi
I am having problem with drag and drop in panel dashboard.
I will explain what i am doing.
I am using Oracle three column template in First region i am having a table that showing all customer.
I drag one record from my table and drop it on customer info (CIF) page on second region it is working fine.
my CIF page has a dashboard with 6 panel box. i am showing 6 different jsff in 6 panel box.
I put drop target in each jsff
<af:dropTarget dropListener="#{backingBeanScope.backing_customerinformation.handleItemDrop}"
actions="COPY">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="CustomerSearchDnD"/>
</af:dropTarget>
when i put drop target my panel boxes moves only when i drag it to another panel box header not entire part of panel box.
if i remove the drop target then panel box move normally as the example given on: [http://adfui.us.oracle.com:7778/faces-trunk/faces/visualDesigns/dashboard.jspx?_afrLoop=2021391022520156&_afrWindowMode=0&_afrWindowId=null] but in taht case i am not able to drag and drop my data

You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM.

Problem with v and w in a cube

Hi,
I have problem with 'v' and 'w' in an Analysis Services cube (SQL Server 2008R2).
The example is employee number 'frvi' and 'frwi'. The cube summarize both employee's measures to employee number 'frvi'. And does not show the employee number 'frwi'. When I make a sql query in the source db it works fine.
The collation for Analysis Services is Finnish_Swedish, and for the source db Finnish_Swedish_Cl_AS. Is it a problem with the collation?
I hope I'll get help here!
//Anna-Karin

Hi,
Thank you for your answer.
I read now somewhere that w became a letter of it's own in the Swedish language in year 2006. That I did not know. The question is how it is handled in the different collations. I have googled a lot today about this, but have not found anything.
Do you know if you can change the collation in a cube afterwards, and how you do it?
It is correct - when I run a query i management studio, it gives me values for both frwi and frvi. But in the cube the values are summarized to employee frvi.
Best regards Anna-Karin

Problem with Drag and drop manager

I am noticing that the sample provided at
http://livedocs.adobe.com/flex/3/html/help.html?content=dragdrop_7.html is not working when tried on any version of FireFox browser on a Mac OS version 10.6.3.
So my understanding is that there seems to be some problem with the drag and drop manager in Flex when used on Firefox on a Mac OS version 10.6.3.
It will be very helpful if you can provide any work around for this issue. We want to implement the drag and drop feature in a website that we are building for one of our clients.

You must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM.

Problem with QOS for SIP on RV082

Hello,
I have problem with quality of VOIP call with Linskys RV082. Firmware is 2.0.0.19tm.
Router is configured as dual-wan , one port (WAN2) is for ADSL 8000/512kb and other one is (WAN1) SHDSL 8000/8000kb.
VOIP traffic from certain IP of LAN is routed to WAN2 (through protocol binding). We have quaranted QOS on ADSL by ISP.
Problem is that voice is dropping when we load WAN2 with other data connection. Last week i reload new firmware, restore default factory and configured router whole again. All was ok only for 1 day and then voice was dropping again. I mean that problem is at mark packets, because when I put VOIP PBX in front of behind router , QOS is working fine.
Can you help me? Is this know issue?
Thanks.
Jan Babak
Message was edited by: jabacomCZ

thank you for reply !!!
below is the show output :
ciscoasa# show priority-queue statistics outside_wan
Priority-Queue Statistics interface outside_wan
Queue Type = BE
Tail Drops = 0
Reset Drops = 0
Packets Transmit = 7971924
Packets Enqueued = 0
Current Q Length = 0
Max Q Length = 0
Queue Type = LLQ
Tail Drops = 0
Reset Drops = 0
Packets Transmit = 189321
Packets Enqueued = 0
Current Q Length = 0
Max Q Length = 0
ciscoasa#
so does the command look like, the one I should use instead of priority-queue outside_wan ??

Problem with "find" mode in adf/swing application

Hi all,
I'm working on ADF Swing application which uses MS SQL Server 2005 (JDeveloper 10g 10.1.3)
I think that my issue might be well-known…sorry if it has been already discussed somewhere else…
I have a problem with the “find” mode for a detail panel in a master-detail form…(To make it clear the “find” mode is switched on when clicking on the special button on a navigation panel).
So this mode works well in a master panel, but it demonstrates strange behavior on a detail panel, i.e. it takes me two attempts to find the necessary child object and it doesn’t switch back in a simple way from this mode to the normal mode….say if we are in the department 10 (Dept is a master form) we can’t simply find KING employee (Emp is a detail form)…is there any workaround for this?
Thanks in advance. Alex.

Hi Frank, please look this issue

Problem with employee enqueue

Similar Messages

Maybe you are looking for