Problem with fading images in/out

I have a product demo that runs from an XML feed. Text is
defined in the XML as are links to external images. When an image
loads it is set to alpha 0 and then fades up to 100 whilst also
changing from blurred to a crisp image using a blur filter.
When I publish the file and preview it there are horizontal
lines of white pixels that that flicker across the image like
interference as it is fading in. Once the fade is done the
interference stops but any visible bits of it stay on screen.
If I run the generated SWF in a browser this does not happen
and so I didnt worry about it. Now though, I am trying to output
the demo as a video clip to run from a DVD. I am using
File>Export>Export Movie and this picks up the interference
as well.
I have tried various compression setting with no luck and am
thinking I might have to use some third party screen capture
software (camtasia?) instead.
Any thoughts?
Cheers all

hi Markus,
found the following in DB:
"Problem Description:
I have my SCC configured with a LabVIEW perforce client. If I open the VI \examples\comm\access.llb\Retrieving Data from Access.vi and then from its block diagram open the subVI with a icons that says "2", then modify the sub VI, I don't get prompted to check the sub VI out. Howewver, if I close everything down and open the Part 2.vi from the GSW, then it does prompt for check out when I edit it.
Steps to Reproduce:
Make sure the prompt to check out SCC config option is set. 1. Launch LV. 2. Create a new project. 3. Add a VI to the project that is in SCC (not checked out) AND has a subVI that is also in SCC (and not checked out). 4. Open the VI from the project. 5. Go to the block diagram of the VI and open the subVI. 6. Edit the subVI. No prompt to check out is presented.
Workaround:
1. Explicityly add the subVI as an item under source. 2. Refresh the dependencies node after adding the main VI."
furthermore I found this link but I don't know if this will help...
greets!

Similar Messages

Export Problem with Color Image Washing Out

I did an export of an image from DNG to JPG in LR4. Funny thing is, the JPG suddenly appears with a washed out look. It looks the same in Develop and Print modules also.
It gets even funnier, because when I use Finder to check the photo, the preview of the image is fine. I also opened the image from Finder in Photoshop CS5 and it is fine there. I also opened the image in PSCS5 from LR4 with "Edit In" and again the image in Photoshop is fine. So this appears to be a view issue in LR4. I did not print out the washed out photo but I suspect it would print out as it appears in LR4.
I've done some other image exports from DNG to JPG with other images and they do not have this problem but those were black&white converted images. However, I did check doing an export of another color image with the same result as the problem image. Here are screen captures of the DNG and the exported JPG (I was going to upload the exported JPG, but like I said it appears fine in Finder):

My monitor calibration is just fine. I was saying that because similar
problems are almost always due to bad monitor profiles. If you calibrate
regularly using hardware calibration then you're probably fine. Many people
use canned profiles from monitor manufacturers however and lightroom is
highly sensitive to those and shows messed up color depending on the
source. In this case however, since the restart fixed it it was likely a
bad preview image. I have seen before that LR sometimes is lazy in
refreshing those and can show you strange results that only get cleared up
by forcing a preview refresh.
Last your top screenshot DOES show that you are pushing the red in that
dress out of the monitor gamut. You can check this in the soft proof in LR
4 by turning on the monitor gamut warning. If you blow the color out of the
monitor gamut the preview is no going to be accurate no matter how good
your calibration. Just a cautionary warning.
Sent from my iPhone

Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

Problem with Gif image

Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help would be great! Below is a snip of code:
JPanel toolBarsPanel = new JPanel();
javax.swing.JToolBar toolbar = new javax.swing.JToolBar();
JButton zoomin = new JButton(new ImageIcon("tut/zoomin.gif"));
JButton fullext = new JButton(new ImageIcon("tut/fullextent.gif"));
JButton identify = new JButton(new ImageIcon("tut/identify.gif"));
JButton btn = new JButton(new ImageIcon("tut/addtheme.gif"));
toolbar.add(zoomin);
toolbar.add(fullext);
toolbar.add(identify);
toolbar.add(btn);
add(toolbar, BorderLayout.NORTH);
Thanks again for any help!

I used to do a lot of work in this sort of thing. After a while we were able to convince our bosses to use generated HTML (JSPs, etc.), so the problem moved to porting JavaScript to different platforms! (Platforms in this context means the different browser/OS combinations, etc.).
The only two things I can recommend are:
- complete control over you code. You will have to fix it! (Tried you apps on a Mac yet?)
- assume a minimal install. Don't assume users are going to have any fancy tools installed on their PC, unless you are developing an Intranet app, where you know the spec of the machines that are going to be using it.
As regarding getting IE to use a relative address, I don't think you are going to have any luck their, I'm afraid! (Although I am curious. It has been some time, but I though it did use relative addresses. Are you absolutely sure about this, did you check this out with System.outs and that?
HTH,
Manuel Amago.

Problem with displaying images exported to PS

This is slightly different than the post about TIFF files not displaying properly.
In Aperture 1.2, when I exported an image to PS and did extensive work on it, and then saved back to Aperture, it would appear in Aperture just as it looked in PS when I saved it.
However, in 1.5, that does not happen. After I save the image, and then go back to Aperture, all of the changes I made in PS don't appear! However, if I again open the image in PS a second time, it will change to the PS version even before the image gets to PS (I can see it change right when I click "open with external editor").
Is this a difference with how 1.2 and 1.5 handle the files? I'm guessing it has something to do with image previews, because I chose not to have Aperture generate previews when I installed 1.5 due to the slow-down issues I saw reported here.
I'm starting to wonder what the point of upgrading to 1.5 was for me... if I can't take advantage of previews (accessing my Aperture library from other apps like Keynote, etc) and if the PS files I work on don't display properly, I'd rather go back to 1.2. This is a major problem in my workflow, since I often spend a lot of time working on images in PS, and I need to be able to see them that way when I return to Aperture.
I'm hoping there's some setting somewhere I can use to fix this. Is there?

David,
I really appreciate your offer to help. However, I have the problem with all images in my library in all projects, so I'm not sure how useful it would be for you to work with a single image I upload to a server.
I'm having the same problem on my MacBook too, though for some unknown reason there are certain projects on my MacBook that the process works fine with. I cannot tell any difference between those projects (that work) and those that don't.
What's even more strange... if I quit Aperture, and re-open it, and then go through the process (open a file in PS2, save, return to Aperture) - it works fine! But ONLY ONE TIME. If I try the same process again, on that same image, or any other image in my library, it will not work. It only works the FIRST TIME I do it after opening Aperture. I tested this several times and got the same result.
I am completely stumped here. I've tried generating previews for a project and turning all of the preview options on, but that doesn't solve the problem either.
Anyone out there have a clue what might be happening? This is more than a minor inconvenience... if my image management system can't display the image as it should appear, it's unusable.
Chris

Why do i have a problem with accessing images in adobe muse

why do i have a problem with accessing images in adobe muse ??????!!!!!
i need heeeeeelp ASAP
pleeeeease

I am on the begining stages with constructing the web so i do not have yet URL. The problem is i can not insert any image any way. Whether by fill a browser or by place image, i have the same issue. All the images with all image's format unable to be selected and it is turned off
I really need help plz
Is there any info i can supply that would help you figiring out the problem ??

My 3rd generation Apple TV has a problem with ghosting images.

My 3rd generation Apple TV has a problem with ghosting images. Whenever it switches to a black screen (between screens, during shows) images from the previous screen are still "visible" and it's driving me insane. I know it's not the TV, no other components have the issue. I've tried switching out HDMI cables to no avail. Anyone else have this issue or know of a fix?

To fix the Apple TV, you need to plug it into your Mac or PC with a USB cable, open iTunes, and restore the firmware on your Apple TV.
Here is a link that will help: http://support.apple.com/kb/HT4367

Slideshow with Fading Images

Is there a tutorial around on creating a slideshow with
fading images. I want to drop my images into a folder. 01.jpg,
02.jpg etc. and then have an actionscript automatically fade them
in and out.
Does someone know how to do this dynamically. I know it can
be done. I want all of the .jpg images to reside in a folder and
then I want the images to load and play automatically using an .XML
file.
Thanks

I would do it with this code:
on frame 1:
mc = function() {
num = (Math.round(Math.random()*27));
//----------------------------------------- 27 being the
number of images i have (name them from 0.jpg to 26.jpg
totalfilename = num + ".jpg";
_root.picLoader.loadMovie("
http://www.yoursite/yourimageFolder/"
+ totalfilename);
//----------------------------------------picLoader being my
empty movie clip where the pictures are loaded
mc();
clearInterval(mc.intID);
mc.intID = setInterval(mc, 20000);
// ----------------------------------------------- every 20
sec the picture will change randomly
then on the emptyMovieClip ad this code:
// this will fade the image in
onClipEvent (load)
this._alpha = 0;
onClipEvent (enterFrame)
if (this._alpha < 100)
this._alpha = this._alpha + 5;
} // end if
if (this._alpha >= 100)
this._alpha = 100;
} // end if
I hop this helped

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

I have a problem with vertical images burned on a cd

I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
John

Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
Charge Information:
Charge remaining (mAh):    4356
Fully charged:    Yes
Charging:    No
Full charge capacity (mAh):    4356
Health Information:
Cycle count:    813
Condition:    Normal
Battery Installed:    Yes
Amperage (mA):    0
Voltage (mV):    12571

I have problems with uploading images to my printing company have the images have been manipulated through CS6 i have saved images as jpeg but the printer company tell me they are not j peg, they will not upload images save from a camera are fine

I have problems with uploading images to my internet printing company when the images have been manipulated through CS6 and i have saved images as jpeg the printer company tell me they are not j peg,
but images saved from my phone or camera images that have not been manipulated upload fine, What am i doing wrong?

Save/Export them as JPG. Photoshop defaults to PSD, so make sure you select JPG and not just rename the file to .jpg.
There are two ways to save them as JPG: Regular Save as option or Save for Web & Devices
Take your pick.

Problem with displaying image

Hello!
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.
Thnks a lot.

1009316 wrote:
Hello! Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1009316".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Sorry, I'm a beginner in APEX and have some problems with displaying images in my application. I have read the same topic but unfortunately didnt find the solution.
So.. I have the interactive report
table test (
NAME NOT NULL VARCHAR2(4000)
ID NUMBER
BLOB_CONTENT BLOB
MIME_TYPE VARCHAR2(4000))
I need to display the column blob_content.This is described in the documentation: About BLOB Support in Forms and Reports and Display Image. There's an OBE tutorial that followed the introduction of declarative BLOB support in 3.1 as well.

Problem with scramb image MULTI DISTORTION COLOR

PROBLEM WITH IMAGE, SOMETIMES ITS DISTORTIONATED, AND SLOW

Are you writing of problems with the image displayed on your screen? Anyway that you can post a screenshot (to make a whole screenshot, hold down the Shift, Command and 3 keys at the same time). Upload your screenshot using the camera icon in the composition bar above.
It would also help to know which model MacBook Pro you have - 15" late 2011, for example.
Clinton

Problem with fading images in/out

Similar Messages

Maybe you are looking for