Problem with fingerprint setting

Hey, i bought an iphone 5s yesterday. I set up the fingerprint yesterday and it worked fine. But after that i faced some problem with the system so i reset the wholephone and edit and deleted my original fingerprint. but after that, my phone cant reenter the fingerprint. it can't read any fingerprint and the name is changed to touch id. what should i do with it?

Hello annteoeena,
Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID. I recommend following the steps below for an issue like the one you described:
Troubleshooting Touch ID
Verify that you are using the latest version of iOS.
Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
Passcode Unlock or iTunes & App Store is enabled.
One or more fingerprints have been enrolled.
If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
If that finger still isn't working, try enrolling a different finger.
If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Find the full article here:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Problem with fingerprint on HP Pro x2 612 g1

hi
i'm having problem with fingerprint on my HP Pro x2 612 g1.. i've installed all of the drivers which i have downloaded using your site and i can see fingerprint option but there is no add button under it.. i'm using windows 8.1 pro 64bit
need your help..
thanks

Here are the direct links to the fingerprint drivers:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7268930&swItemId=ob_138590_1&swEnvOid=415...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7268930&swItemId=ob_134806_1&swEnvOid=415...
Let me know if that helps.
-Chris
I work for HP.
Support Forums are now on your mobile phone: http://m.hp.com/supportforum

Problem with subform set

Hi all ,
I am facing a problem with subform set. When i use two subform sets with same set of conditions in a form, only the first subform set works while the second one does nothing. Did any of you faced the same problem ? If so Please let me know the solution you came up with. Thanks.
SrPrabhu

Hi scott,
The problem is with subform set and not subform. In subform set, we can give conditions to make only one subform visible at a time that satisfies the condition. First create a subform set having more than one subform. Now apply the conditions to that subform set. Check if it works. I m sure it wil work. Now just make a duplicate copy of the same subform set. Place it in the same form so that now two subform sets are available. Now preview the form. U wil fine only one subform set working and the other one doesnt.
We can use any number of subform set within a form. If different conditions are applied to each subform set , it works fine.
i wonder now wat wud u do in case if we are in need of two subformset having the same condition in a form ?
Thanks,
Sr Prabhu

Weird Problem with FSB setting

Hi all,
I've just come across a weird problem with FSB setting.
If I set FSB to 229 my machine runs @ 1.6Ghz only.
When I set to 230 it runs @ 3.2Ghz (as it should).
Any ideas what could be causing this?
Thanks
Mick

If FSB @ =
Strange thing.. What a magical 1MHz

Problem with layer sets opening

Hi,
I have a problem open layer sets. In my script I get layers index and then iterate throught this layers.
Here is the script:
function getAllLayersByIndex(){
       function getNumberLayers(){
       var ref = new ActionReference();
       ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID("NmbL") )
       ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
       return executeActionGet(ref).getInteger(charIDToTypeID("NmbL"));
       function hasBackground() {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr"), charIDToTypeID( "Bckg" ));
           ref.putEnumerated(charIDToTypeID( "Lyr " ),charIDToTypeID( "Ordn" ),charIDToTypeID( "Back" ))//bottom Layer/background
           var desc = executeActionGet(ref);
           var res = desc.getBoolean(charIDToTypeID( "Bckg" ));
           return res
       function getLayerType(idx,prop) {
           var ref = new ActionReference();
           ref.putIndex(charIDToTypeID( "Lyr " ), idx);
           var desc = executeActionGet(ref);
           var type = desc.getEnumerationValue(prop);
           var res = typeIDToStringID(type);
           return res
       function getLayerVisibilityByIndex( idx ) {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
           ref.putIndex( charIDToTypeID( "Lyr " ), idx );
           return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));;
       var cnt = getNumberLayers()+1;
       var res = new Array();
       if(hasBackground()){
    var i = 0;
          }else{
    var i = 1;
       var prop = stringIDToTypeID("layerSection");
       for(i;i<cnt;i++){
          var temp = getLayerType(i,prop);
          if(temp != "layerSectionEnds") res.push(i);
       return res;
       function getLayerVisibilityByIndex( idx ) {
           var ref = new ActionReference();
           ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "Vsbl" ));
           ref.putIndex( charIDToTypeID( "Lyr " ), idx );
           return executeActionGet(ref).getBoolean(charIDToTypeID( "Vsbl" ));
function makeActiveByIndex( idx, visible ){
    var desc = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putIndex(charIDToTypeID( "Lyr " ), idx)
      desc.putReference( charIDToTypeID( "null" ), ref );
      desc.putBoolean( charIDToTypeID( "MkVs" ), visible );
   executeAction( charIDToTypeID( "slct" ), desc, DialogModes.NO );
var groups = getAllLayersByIndex();
    for(var i = groups.length-1; i >= 0 ; i--) {
      makeActiveByIndex( groups[i], true );
      ....working with layers....
I think, my problem is in function makeActiveByIndex, because it doesn't make active a folder and doesn't open it.
You can see it on this picture. Active layer set is "Skupina 1" and it is in layer set "hlavicka". But "hlavicka" is not open. WHY??
Can you help me fix this problem??
Thank you Domaneni

Hi, for the past days I've worked on a script to toogle opening and closing layeSets, I've taken the code that TeddyBear posted here: http://ps-scripts.com/bb/viewtopic.php?p=14773 and adjusted it a little bit, and that's what I came up with, I hope it will help you:
<javascriptresource>
<name>BCM> ToogleOpen_CloseGroup...</name>
<category>BCM</category>
</javascriptresource>
//For code readability
// http://ps-scripts.com/bb/viewtopic.php?f=9&t=3235
function getActiveLayerIndex() {
    var ref = new ActionReference();
    ref.putProperty( charIDToTypeID("Prpr") , charIDToTypeID( "ItmI" ));
    ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    return executeActionGet(ref).getInteger(charIDToTypeID( "ItmI" ));
function cTID(s){return charIDToTypeID(s)}
function sTID(s){return stringIDToTypeID(s)}
// =============================
// The main function
function closeGroup(layerSet) {
   var m_Name = layerSet.name;
   var m_Opacity = layerSet.opacity;
   var m_BlendMode = layerSet.blendMode;
   var m_LinkedLayers = layerSet.linkedLayers;
var currINDEX = getActiveLayerIndex();
   var m_bHasMask = hasLayerMask();
   if(m_bHasMask) loadSelectionOfMask();
   if(layerSet.layers.length <= 1) {
      addTempLayerSetIn(currSetIDX-1);
      makeActiveByIndex(currSetIDX+2, false);
      ungroup();
      groupSelected(m_Name);
      deleteTempLayerSetbyIdx(currSetIDX+1);
   } else {
       makeActiveByIndex(currSetIDX, false);
      ungroup();
      groupSelected(m_Name);
   var m_Closed = activeDocument.activeLayer;
   m_Closed.opacity = m_Opacity;
   m_Closed.blendMode = m_BlendMode;
   for(x in m_LinkedLayers) {
      if(m_LinkedLayers[x].typename == "LayerSet")
         activeDocument.activeLayer.link(m_LinkedLayers[x]);
   if(m_bHasMask) maskFromSelection();
   return m_Closed;
// =============================
// Below are all necessary subroutines for the main function to work
function ungroup() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( sTID( "ungroupLayersEvent" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function addLayer() {
   var m_ActiveLayer          =    activeDocument.activeLayer;
   var m_NewLayer             =    activeDocument.layerSets.add();
   m_NewLayer.move(m_ActiveLayer, ElementPlacement.PLACEBEFORE);
   return m_NewLayer;
function hasLayerMask() {
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( sTID( "layer" ), cTID( "Ordn" ), cTID( "Trgt" ));
   var m_Dsc01= executeActionGet( m_Ref01 );
   return m_Dsc01.hasKey(cTID('Usrs'));
function activateLayerMask() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
   } catch(e) {
      var m_TmpAlpha = new TemporaryAlpha();
      maskFromSelection();
      activateLayerMask();
      m_TmpAlpha.consume();
function deleteMask(makeSelection) {
   if(makeSelection) {
      loadSelectionOfMask();
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   try {
      executeAction( cTID( "Dlt " ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function selectLayerMask() {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putEnumerated(cTID("Chnl"), cTID("Chnl"), cTID("Msk "));
   m_Dsc01.putReference(cTID("null"), m_Ref01);
   m_Dsc01.putBoolean(cTID("MkVs"), false );
   try {
      executeAction(cTID("slct"), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function loadSelectionOfMask() {
   selectLayerMask();
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putProperty( cTID( "Chnl" ), cTID( "fsel" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   var m_Ref02 = new ActionReference();
   m_Ref02.putEnumerated( cTID( "Chnl" ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "T   " ), m_Ref02 );
   try {
      executeAction( cTID( "setd" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function maskFromSelection() {
   if(!hasLayerMask()) {
      var m_Dsc01 = new ActionDescriptor();
      m_Dsc01.putClass( cTID( "Nw " ), cTID( "Chnl" ) );
      var m_Ref01 = new ActionReference();
      m_Ref01.putEnumerated( cTID( "Chnl" ), cTID( "Chnl" ), cTID( "Msk " ) );
      m_Dsc01.putReference( cTID( "At " ), m_Ref01 );
      m_Dsc01.putEnumerated( cTID( "Usng" ), cTID( "UsrM" ), cTID( "RvlS" ) );
      try {
         executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
      } catch(e) {
         activeDocument.selection.selectAll();
         maskFromSelection();
   } else {
      if(confirm("Delete existing mask?", true, "Warning")) {
         activateLayerMask();
         deleteMask();
function groupSelected(name) {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putClass( sTID( "layerSection" ) );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   var m_Ref02 = new ActionReference();
   m_Ref02.putEnumerated( cTID( "Lyr " ), cTID( "Ordn" ), cTID( "Trgt" ) );
   m_Dsc01.putReference( cTID( "From" ), m_Ref02 );
   var m_Dsc02 = new ActionDescriptor();
   m_Dsc02.putString( cTID( "Nm " ), name);
   m_Dsc01.putObject( cTID( "Usng" ), sTID( "layerSection" ), m_Dsc02 );
   executeAction( cTID( "Mk " ), m_Dsc01, DialogModes.NO );
   return activeDocument.activeLayer;
function addToSelection(layerName) {
   var m_Dsc01 = new ActionDescriptor();
   var m_Ref01 = new ActionReference();
   m_Ref01.putName( cTID( "Lyr " ), layerName );
   m_Dsc01.putReference( cTID( "null" ), m_Ref01 );
   m_Dsc01.putEnumerated( sTID( "selectionModifier" ), sTID( "selectionModifierType" ), sTID( "addToSelection" ) );
   m_Dsc01.putBoolean( cTID( "MkVs" ), false );
   try {
      executeAction( cTID( "slct" ), m_Dsc01, DialogModes.NO );
   } catch(e) {}
function TemporaryAlpha() {
   activeDocument.selection.store((this.alpha = activeDocument.channels.add()));
   activeDocument.selection.deselect();
   this.consume = function() {
      activeDocument.selection.load(this.alpha);
      this.alpha.remove();
function makeActiveByIndex( idx, visible ){
     if( idx.constructor != Array ) idx = [ idx ];
     for( var i = 0; i < idx.length; i++ ){
          var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID( 'Lyr ' ), idx[i])
          desc.putReference( charIDToTypeID( 'null' ), ref );
          if( i > 0 ) {
               var idselectionModifier = stringIDToTypeID( 'selectionModifier' );
               var idselectionModifierType = stringIDToTypeID( 'selectionModifierType' );
               var idaddToSelection = stringIDToTypeID( 'addToSelection' );
               desc.putEnumerated( idselectionModifier, idselectionModifierType, idaddToSelection );
          desc.putBoolean( charIDToTypeID( 'MkVs' ), visible );
          executeAction( charIDToTypeID( 'slct' ), desc, DialogModes.NO );
function deleteActiveLayer(){
   // =======================================================
   var idDlt = charIDToTypeID( "Dlt " );
       var desc752 = new ActionDescriptor();
       var idnull = charIDToTypeID( "null" );
           var ref529 = new ActionReference();
           var idLyr = charIDToTypeID( "Lyr " );
           var idOrdn = charIDToTypeID( "Ordn" );
           var idTrgt = charIDToTypeID( "Trgt" );
           ref529.putEnumerated( idLyr, idOrdn, idTrgt );
       desc752.putReference( idnull, ref529 );
   executeAction( idDlt, desc752, DialogModes.NO );
function isLayerSet( idx ) {
     var propName = stringIDToTypeID( 'layerSection' );
     var ref = new ActionReference();
     ref.putProperty( charIDToTypeID( "Prpr" ) , propName);
     ref.putIndex( charIDToTypeID ( "Lyr " ), idx );
     var desc = executeActionGet( ref );
     var type = desc.getEnumerationValue( propName );
     var res = typeIDToStringID( type );
     // alert(res);
     return res == 'layerSectionStart' ? true:false;
function openGroup1(theGroup) {
   currSetIDX= getActiveLayerIndex();
   if(isLayerSet( currSetIDX ))
    getNamesPlusIDsOfLayerSet();
makeActiveByIndex(currSetIDX, false);
function getNamesPlusIDsOfLayerSet(){
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   var Names=[];
   var x = 0;
   var y = 0;
   var r = 0;
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        // alert(layerName+": _ :"+ls);
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd"){break};
          continue
        if(ls == "layerSectionContent"){makeActiveByIndex(i,false);break};
        var layerType = typeIDToStringID(desc.getEnumerationValue( stringIDToTypeID( 'layerSection' )));
        var isLayerSet =( layerType == 'layerSectionContent') ? false:true;
Names.push([[Id],[layerName],[isLayerSet]]);
return Names;
function getLayersNb()//function to find out if the number of layers in the document
    var ref = new ActionReference();
    ref.putProperty( charIDToTypeID( 'Prpr' ), stringIDToTypeID('numberOfLayers') );
    ref.putEnumerated( charIDToTypeID( "Dcmn" ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Trgt" ) );
    var desc = executeActionGet(ref);
    var numberOfLayers = desc.getInteger(stringIDToTypeID('numberOfLayers'));
    return numberOfLayers;
function toogleOpenCloseSet(){
myALayerIDX = getActiveLayerIndex();
myGroupP = app.activeDocument.activeLayer;
if(!isLayerSet(myALayerIDX)){
      myGroupP = app.activeDocument.activeLayer.parent;
      if(myGroupP.typename != "Document"){
        if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
}else{
    if(isSetOpened1(myGroupP)){closeGroup(myGroupP)}else{openGroup1(myGroupP)};
function getFristLayerSetChildVisible(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   var Names=[];
    var x = 0;
    var y = 0;
    var r = 0;
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        // alert(layerName+": _ :"+vis);
/*        if(desc.hasKey(stringIDToTypeID("visible")))
          alert(desc.getType(stringIDToTypeID("visible")));
        if(ls == "layerSectionStart"){x++};
        if(vis == 1 && Id!=parId && r!=0){
          var theOBj = {id:Id, lname:layerName, idx:i};
          xx =true;
          Names.push(theOBj);
          break;
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd"){break};
          continue
    return Names;
function getLastChildIdx(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
    var x = 0;
    var y = 0;
    var r = 0;
    var lastChIdx = 0;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd")
            lastChIdx = i;
            break;
        // alert(x+" _ "+y+" _ "+r+" _ "+layerName);
    return lastChIdx;
function getNbOfChilds(){
xx = false;
   var ref = new ActionReference();
   ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
   var count = executeActionGet(ref).getInteger(charIDToTypeID('Cnt '));
var parId = executeActionGet(ref).getInteger(stringIDToTypeID( 'layerID' ));
   currINDEX = getActiveLayerIndex();
    var i = currINDEX;
    var nb = 0;
    var x = 0;
    var y = 0;
    var r = 0;
   for(i; i > 0 ; i--){
        ref = new ActionReference();
        ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
        var desc = executeActionGet(ref);
        var layerName = desc.getString(charIDToTypeID( 'Nm ' ));
        var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
        var ls = desc.getEnumerationValue(stringIDToTypeID("layerSection"));
        ls = typeIDToStringID(ls);
        var vis = desc.getInteger(stringIDToTypeID( 'visible' ));
        if(ls == "layerSectionStart"){x++};
        if(layerName.match(/^<\/Layer group/) )
          y ++;
          r = x - y;
          if(r == 0 && ls == "layerSectionEnd")
            break
          continue
        nb++;
    return nb;
function isSetOpened1( group ){
app.activeDocument.activeLayer = group;
xx = true;
currSetIDX = getActiveLayerIndex();
addTempLayerSetIn(currSetIDX-1);
var fIdx = getActiveLayerIndex();
makeActiveByIndex(currSetIDX+2, false);
if(fIdx == getActiveLayerIndex())
    xx = false;
deleteTempLayerSetbyIdx(currSetIDX+1);
return xx;
function addTempLayerSetIn(idxx){
    // =======================================================
    var idMk = charIDToTypeID( "Mk " );
        var desc58 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref63 = new ActionReference();
            var idlayerSection = stringIDToTypeID( "layerSection" );
            ref63.putClass( idlayerSection );
        desc58.putReference( idnull, ref63 );
    executeAction( idMk, desc58, DialogModes.NO );
    // =======================================================rename
    var idsetd = charIDToTypeID( "setd" );
        var desc202 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref209 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            var idOrdn = charIDToTypeID( "Ordn" );
            var idTrgt = charIDToTypeID( "Trgt" );
            ref209.putEnumerated( idLyr, idOrdn, idTrgt );
        desc202.putReference( idnull, ref209 );
        var idT = charIDToTypeID( "T   " );
            var desc203 = new ActionDescriptor();
            var idNm = charIDToTypeID( "Nm " );
            desc203.putString( idNm, "mb-dummy tempTestLayerSetOpen_Closed" );
        var idLyr = charIDToTypeID( "Lyr " );
        desc202.putObject( idT, idLyr, desc203 );
    executeAction( idsetd, desc202, DialogModes.NO );
    // =======================================================move
    var idmove = charIDToTypeID( "move" );
        var desc59 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
            var ref64 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            var idOrdn = charIDToTypeID( "Ordn" );
            var idTrgt = charIDToTypeID( "Trgt" );
            ref64.putEnumerated( idLyr, idOrdn, idTrgt );
        desc59.putReference( idnull, ref64 );
        var idT = charIDToTypeID( "T   " );
            var ref65 = new ActionReference();
            var idLyr = charIDToTypeID( "Lyr " );
            ref65.putIndex( idLyr, idxx );
        desc59.putReference( idT, ref65 );
        var idAdjs = charIDToTypeID( "Adjs" );
        desc59.putBoolean( idAdjs, false );
        var idVrsn = charIDToTypeID( "Vrsn" );
        desc59.putInteger( idVrsn, 5 );
    executeAction( idmove, desc59, DialogModes.NO );
function deleteTempLayerSetbyIdx(idxx){
// =======================================================
var idDlt = charIDToTypeID( "Dlt " );
      var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID( 'Lyr ' ), idxx);
          // ref.putIdentifier(charIDToTypeID( 'Lyr ' ), idxx);
          desc.putReference( charIDToTypeID( 'null' ), ref );
executeAction( idDlt, desc, DialogModes.NO );
toogleOpenCloseSet();

Problems with version sets

I have PSE 6. When I open a JPG from the Organizer using Full Edit and then try to save, I do not get the option to save the image in a version set (even though I do have the Organizer option checked). However, I noticed that invoking Full Edit also prompts the Organizer to say there is a new file in the watched folders. This "new" file is the very same file in the very same location. If I accept to add the file to the Organizer I get two thumbnails in the Organizer, both pointing to the same file on disk. If I do this then the "Edit In Progress" banner appears on the "new" thumbnail and the editor does allow me to add the image to the version set. I am sure that I did not have to do this before, I would expect Full Edit to just open the image, mark it in the Organizer as being edited, not try to add it back to the catalog and allow me to save the edit in a version set. What might be causing this behaviour?
I also have similar and I think related problems with RAW images too, but I am hoping that resolving the above will resolve the RAW issue too.

I should have said that I did try that but it still prevented me from creating a new version in a version set when saving. It is as if the editor needs to start on a copy of the Organizer's entry to allow version sets, as if the original is somehow "locked". Could that be possible?

Problem with character set - Reports 11.1.1.4

Hi!
I have a problem with Oracle Reports 11g regarding character set configuration. The default character set WE8ISO8859P1 works, so PDF reports have a regular display except for Eastern European (EE) letters which are replaced by "¿" sign.
So, when I set any other character set in reports.sh, which would be a normal step to get EE letters, I'm always getting Greek Alphabet in PDF reports. Why Greek Alphabet?
The character sets I tried to use are: EE8ISO8859P2, UTF8 and AL32UTF8.
I changed uifont.ali and included PDF Subset with all four Arial font variants and, of course, I placed all fonts in fonts folder which is pointed by REPORTS_FONT_DIRECTORY.
In Reports Builder everything works fine, but when I have to deploy the report to the Reports Services, the problem occurs.
Also, when I've tried to execute PDF report using In-Process Reports Server (rep_wls_reports_hostnameasinst1) instead of AS Instance Reports Server (RptSvr_hostnameasinst1, which is a regular server), I'm getting Greek Alphabet in PDF reports even if the default character set is WE8ISO8859P1 in reports.sh. What is wrong with it? Where is Greek Alphabet configured?
The production environment is 64-bit Oracle Linux 5.6 with Weblogic 10.3.4 and Forms&Reports 11.1.1.4. Forms works fine with character set EE8ISO8859P2 defined in default.env file.
Thanks in advance!
Regards,
Dejan

Thank you, Denis!
Doc 300416.1 was very useful but Note 356221.1 - A Practical Methodology on Porting Reports from Windows to Unix with Different Font is actually crucial for configuring Reports on Linux.
Also, there is a bug in 11.1.1.3 and 11.1.1.4, which can be fixed using the patch ( Note 1138405.1 - PDF Reports With Font Subsetting Raises Error "Bad /Bbox" on 64-Bit Linux ).
Kind regards!

Problem with version sets in Elements 12

I have just started using elelments 12. I have been having problems with inconsistency in forming version sets. Some sets forms as expected. However, quite often after editing, when returning to Organizer the edited picture is not in a version set with the original and in fact is not even visible. I can get to the edited version only through the "Open" tab in the Editor. I have check the appropriate "Save in version set" in the save menu. Suggestions?

Seems you have the same problem :
http://forums.adobe.com/thread/1309160?start=0&tstart=0
The source of the problem is not clearly found today. It seems that happens on previously converted catalogs.
A workaround seems to have been found : killing the autoanalyzer.exe process in the task manager.

Problem with character set UTF-16 LE

Hello.
There were difficulties with character set change, using function convert ()
The matter is that in the list v$nls_valid_values the character set AL16UTF16LE does not appear, during too time the inquiry is successfully carried out
convert ([some-national-characters], ' CL8MSWIN1251 ', ' AL16UTF16LE ').
But at giving on an input of the data stored in CLOB, there is an error "a character set is not supported"
What are possible ways of the decision of a problem?

You can try to use DBMS_LOB. SUBSTR to access LOB data like in the following example:
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> declare
2 v_i clob;
3 v_o clob;
4 begin
5 v_i := 'a';
6 v_o:=convert(dbms_lob.substr(v_i,1,1),'AL16UTF16LE', 'CL8MSWIN1251');
7 end;
8 /
PL/SQL procedure successfully completed.

Problem with Character set

Hi,
I am facing some problems with Oracle character sets.
I have set the database character set as UTF8.
I have set the environment variable NLS_CHAR to Portuguese_Portugal.UTF8.
I insert a Portuguese text for varchar and clob columns in a table.
However when I select the text from that table, I get some junk values for the clob.
Any help is appriciated. Thanx in advance.
Yash
null

Hi Yash,
Can u tell me how to insert values in a nchar/nvarchar column in
Indian language scripts?
I have set database characterset to 'IN8ISCII'? But while
inserting values in the table I am getting error as characterset
mismatch'
I have tried it using UTF8 chracterset also??
As fa as your problem is concerened, I think u have to set the
nls_ characterset value$ in props$ table
and same for nls_nchar_characterset column also..
Thanks in advance
Manoj mehta

Problems with initial set up for mail and other things

I am having issues with mail set up and getting printers and other things work with Mac Pro Book, since i am new convert i am feeling really frustrated with these things, anyone out there has experince in mac mail set ups and other instatlations like msn messanger etc.

Sorry you are having problems but you need to provide more detailed information about the problems such as what type of email account are you trying to set up in Mail - .Mac, IMAP or POP and is this account provided by your ISP used for connecting to the internet or by an email account provider?
What happens including error messages provided when trying to create the email account in Mail?
Regarding a printer problem, this is the Mail & Address Book forum. You should post a question about printer issues with detailed information such as the make and model of your printer and what you have tried to this point at the Printer & Faxing forum here.
http://discussions.apple.com/forum.jspa?forumID=756
Installing MSN Messenger should be easy. I believe Messenger does not include an installer and is provided as package via a disk image that only requires dragging the application from the mounted disk image to your Applications folder which copies the application package from the mounted disk image to your hard drive.
What problems are you having with installing Messenger?

Adobe Flashplayer 12 creates problem with Kaltura setting access

After installing Flashplayer 12 I have the following screen: problem with Kaltura 'can't access settings'
(Have screen shot but cannot paste it here ...)
<pre><nowiki>
Looks like:
Captions Settings
FONT SIZE
Stroke ON
Background OFF
SAVE CANCEL
******************</nowiki></pre>
The video plays, albeit with this window in the middle of the image. Just happened after last update.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Problem with Character Set in Oracle database 10g

Hi,
I tried to import one tablespace into test server. Source server with Oracle 8i and Target server with Oracle database 10g. The error I get is
Import: Release 10.2.0.1.0 - Production on Thu Aug 3 00:20:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V08.01.07 via conventional path
About to import transportable tablespace(s) metadata...
import done in WE8DEC character set and AL16UTF16 NCHAR character set
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
. importing SYS's objects into SYS
. importing SYS's objects into SYS
IMP-00017: following statement failed with ORACLE error 19736:
"BEGIN sys.dbms_plugts.beginImport ('8.1.7.4.0',2,'2',NULL,'NULL',67051,25"
"51,2); END;"
IMP-00003: ORACLE error 19736 encountered
ORA-19736: can not plug a tablespace into a database using a different national character set
ORA-06512: at "SYS.DBMS_PLUGTS", line 2386
ORA-06512: at "SYS.DBMS_PLUGTS", line 1946
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
PLZ somebody help in geting resolve this. Has anybody seen this error before.

The solution to this problem is described in MetaLink note #211920.1. But this note is published with LIMITED access as it involves using a hidden parameter.
You can get access to the note through Oracle Support only.
The problem itself is solved generically, if the source database is at least 10.1.0.3 and the target database is 10.2
-- Sergiusz

Problem with Sales Set in ECC 6.0

Hai Guys,
I am having a problem on having a Sales Set. We have two company codes.
I am creating the sales set by the following steps.
1. Create an article, (type: Sales set instead of single article) and in the Basic Data, click the components button, in the subsequent screen entered the component articles and the qty.
2. After listing that Sales set article to the desired sites, I am creating the sales set article using the movement type 317 in tcode mb1b.
3. In my inventory, the component's stocks are reduced and the stock of the Sales set article is increased.
4. Once the Sales is made for the Sales set article, and PGI is done, the system reduces the stock of the Sales stock and no changes is made to the remaining component article stocks.
Here is where I encounter the issue.
In one of the company code, this is working fine.
But in the another company code's sites, when I do the PGI for Sales Set article, the stock of the Sales Set remains the same but the component articles' stocks are reducing.
I am startled to find the unusual behavior. Does it has anything to do with the site profile or any other MM customizations?
Had anybody come across this kind of issues previously? Can anybody help me in this aspect?
Regards,
Maheshwaran. I

no replies still.. so closing

Problem with Character Set after upgrade

Hello,
I have a probelm and was wondering if anyone has seen this before.
I have been running Java 1.4.2_13 for a while now on some Windows servers. About a month ago we upgraded to Java 1.6.0_12.
We are reading input files that are in the character set Big5 HKSCS. After the upgrade our application started to report certain characters as invalid. Some of the characters are 0xD843, 0xD844.
These should be valid characters and were in the previous version of Java (1.4.2_13).
Has anyone seen this?
Thanks in advance,
Jerry

The [Supported Encodings|http://java.sun.com/javase/6/docs/technotes/guides/intl/encoding.doc.html] page for the Java 6 release describes that charset as
Big5 with Hong Kong extensions, Traditional Chinese (incorporating 2001 revision)You would know more than I do about that 2001 revision (or at least, not less than I do, since I know nothing about it). Perhaps that's the source of your problem?
Edit: especially since the [Supported Encodings|http://www.j2ee.me/j2se/1.4.2/docs/guide/intl/encoding.doc.html] page for Java 1.4 doesn't mention the 2001 revision.

Problem with fingerprint setting

Similar Messages

Maybe you are looking for