Problem with generating of numbers NUMBER_GET_NEXT

Hi,
I need to generate numbers for Project-Id. I've created a number range object (SNRO) NR_PROID (Settings: number length domain: numc10, No. of numbers in buffer: 10) with interval 01: 0000000001 - 9999999999, current number 100.
I use it in the FM NUMBER_GET_NEXT:
CALL FUNCTION 'NUMBER_GET_NEXT'
    EXPORTING
      NR_RANGE_NR = '01'
      OBJECT = 'NR_PROID'
      IMPORTING
        NUMBER = PROJID_TEMP
        EXCEPTIONS
          INTERVAL_NOT_FOUND = 1
          NUMBER_RANGE_NOT_INTERN = 2
          OBJECT_NOT_FOUND = 3
          QUANTITY_IS_0 = 4
          QUANTITY_IS_NOT_1 = 5
          INTERVAL_OVERFLOW = 6
          BUFFER_OVERFLOW = 7
          OTHERS = 8.
But I always get numbers from 0 to 9, and then 0, 1, ...9 again. Each time increases the current number of the object's interval (10 numbers).
However if I test the FM NUMBER_GET_NEXT with my object NR_PROID (SE37) it works fine.
Does anybody know, what the reason could be?
Thank you in advance.
Irina
Edited by: Irina Ziegler on Feb 6, 2008 10:08 PM
Edited by: Irina Ziegler on Feb 6, 2008 10:08 PM

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Similar Messages

Problem with generating xml and nested cursor (ora-600)

I have a problem with generating xml (with dbms_xmlquery or xmlgen) and nested cursors.
When I execute the following command, I get a ORA-600 error:
select dbms_xmlquery.getxml('select mst_id
, mst_source
, cursor(select per.*
, cursor(select ftm_fdf_number
, ftm_value
from t_feature_master
where ftm_mstr_id = pers_master_id ) as features
from t_person per
where pers_master_id = mst_id ) as persons
from f_master
where mst_id = 3059435')
from dual;
<?xml version = '1.0'?>
<ERROR>oracle.xml.sql.OracleXMLSQLException: ORA-00600: internal error code, arguments: [kokbnp2], [1731], [], [], [], [], [], []
</ERROR>
The problem is the second cursor (t_feature_master).
I want to generate this:
<master>
<..>
<persons>
<..>
<features>
<..>
</features>
</persons>
<persons>
<..>
<features>
<..>
</features>
</persons>
</master>
If i execute the select-statement in sql-plus, then I get the next result.
MST_ID MST_SOURCE PERSONS
3059435 GG CURSOR STATEMENT : 3
CURSOR STATEMENT : 3
PERS_MASTER_ID PERS_TITLE PERS_INITI PERS_FIRSTNAME PERS_MIDDL PERS_LASTNAME
3059435 W. Name
CURSOR STATEMENT : 15
FTM_FDF_NUMBER FTM_VALUE
1 [email protected]
10 ....
I use Oracle 8.1.7.4 with Oracle XDK v9.2.0.5.0.
Is this a bug and do somebody know a workaround?

Very simple...Drop all type objects and nested tables and create them again. You will get no error. I'll explain the reason later.

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with generate sine 50 Hz

I have a problem with generate sine voltage with freq 50 Hz.
I form waveform with this frequency and sent in to the "AO Write" with update rate equal waveform lenght*frequency. And so I have a cycle of my program 20 ms, but I need a cylce 5 ms.
How I can make it right?
I forming my waveform "Basic Function Generator" with sampling Info equal my waveform lenght.
Message Edited by Unk on 09-28-2005 02:36 PM

The
amplitude
phase
frequency
of the signal are independent parameters.
You can generate the relevant signal using Basic Function Generator VI, then supply this waveform to your AO operation (DAQmx write is polymorphic and allows you to use a waveform directly as the input - those guys at NI are clever )

""selected font failed during last operation." and " there is a problem with generator" application error

For PSDs I have created in older versions of Photoshop CC 2014 I am getting errors when opening / trying to save. They seem to be either Generator or font related. Interestingly, PSDs created in newer versions of PS CC 2014 have no issues, even when using same fonts.
I am getting the error messages:
When I open the older PSD files, (again created or saved in older versions of PS CC 2014) I am asked to update fonts. If I do I get the error.
'Selected font failed during last operation'
When I try to don't try to update fonts and then I try to play with the file I get the following error.
'There is a problem with Generator. Please quit Photoshop and try again. If the problem persists, remove any third-party plugins or try re-installing photoshop.
I don't have any third party plugins that I can see.
I have re-installed multiple times.
I need to use this program and I am paying for your services. I am actually on the phone now with 'help desk' and have been on hold for 22 minutes.
Please Help

When I installed the Apple programs, mobile device application did not uninstall by itself. I had to go to c://program files/common files/apple/mobile device application (or something like that) and manually delete the contents and the folders. I have a 64 bit version so I also had to visit c://program files (x86)/common files/apple/mobile application device (or similar) and also manually delete the files and folders. I had to delete the files before I could delete the folders. This manual part is probably tripping everyone up, because it's not as easy as simply hitting uninstall in the control panel. But the instructions are there. I hope this helps you.

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Synching problems with pages and numbers

After an initial problem with synching which was resolved with Yosemite Pages and Numbers have been synching across all my devices for a couple of weeks and now all of a sudden they have stopped again!! They synch across my phones and iPad but not to my macbook pro!! Very very annoying! How do I resolve it?

Found a solution, but it is odd:
On the 2008 Mac Pro, I UNCHECK the boxes beside Pages and Numbers in System Preferences > iCloud > iCloud Drive > Options. Now Pages and Numbers will properly save edited documents to the appropriate folders on iCloud Drive.
Go figure ...
Hope that this helps someone else.
Jon

Problem with opening a Numbers document

I have a problem with a Numbers document, which I created 3 weeks ago and step by step extended with additional functionality. I'm not anymore able to open the document. I can rename the document and maybe - I didn't try - delete the document. But when I'm clicking on the file's icon, the error message appears "Tabelle kann nicht geöffnet werden". It seems that the file is defect but how I it be revived. What steps I have to do to re-open the document?

Check out that thread if you find it helpful. There are some cool ideas there.
Adding a font to pages for Ipad

RMDATIND uploading problem with external material numbers

Hi,
I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
I have a problem with uploading materials which have two types of external material numbers.
For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
Does anyone know how fix this issue?

Sweth123 wrote:
Hi Guys:
>
> Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
>
> i should be able to create a material with external number range and it can be numeric or alpha numeric?
>
>
> Thanks
> Sweth
Hi,
go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
for ex: from 300000000 to 399999999 internal no.range
from A to ZZZZZZ external no.range
from this u can able to create a material with external number range and it can be numeric or alpha numeric
Regards
Raj.

Problem with generating thumbnails for Facebook

After yesterday's Business Catalyst failure (Intermittent site loading issue on all data centers) we have a problem with thumbnails for Facebook.
Our each publication has an extra tag og:title placed in the <head>. For example in this article: http://www.leftlane.pl/lip14/zanizanie-przebiegu-samochodu-w-koncu-stanie-sie-niemozliwe.h tml
there is tag <meta property="og:image" content="http://www.leftlane.pl/lip14/images/364994_8207.jpg" />
Until yesterday, every published text was getting into debugger (https://developers.facebook.com/tools/debug/). Debugger fetch the image creating a thumbnail. Everything worked as it should.
Unfortunately, after yesterday's failure thumbnails are no longer generated. In place of the thumbnail is a white spot, like in the picture below. Can I do something to thumbnails work again?
We are using Adobe Muse (2014.1).

Just a word of warning about this facebook tester, facebook caches results for sometimes upto 48 hours, so if index the page using facebook then make a change on a page then reindex most of the time (in my dealings) it looked the same, I had to throw different querystring information into the URL or use different URLs to make it look different to facebook and get a fresh (re)index and for it to pick up changes.

Problem with applescript for Numbers

I am new to Applescript and am haveng problems with what seems to be a pretty simple task. I want to check the value of each cell to test for a certain condition and then based on the results increment another cell. I keep getting the following error:
error "Numbers got an error: Can’t make {4, 5} into type integer." number -1700 from {4, 5} to integer
Here is my script:
tell application "Numbers" to tell document 1 to tell sheet "Sheet 1" to tell table "Table 1"
          set fNineStart to 4
          set fNineEnd to 12
          set bNineStart to 14
          set bNineEnd to 22
          repeat with irow from 8 to 40
                    set skinscount to 0
                    repeat with jcol from fNineStart to fNineEnd
                              set minscore to value of cell (jcol & 5)
                              if value of cell (jcol & irow) is equal to minscore and the value of cell (jcol & 6) is equal to 1 then
                                        set skinscount to skinscount + 1
                              end if
                    end repeat
                    set the value of cell (27 & irow) to skinscount
          end repeat
end tell
Here is the spreadsheet:
Name
1
2
3
4
5
6
7
8
9
Front
Nine
10
11
12
13
14
15
16
17
18
Back
Nine
Total
Net
ESC
score
Skins
Par
4
4
4
5
3
4
5
3
4
36
4
5
3
4
5
3
4
4
4
36
birdie
3
3
3
4
2
3
4
2
3
27
3
4
2
3
4
2
3
3
3
27
eagle
2
2
2
3
1
2
3
1
2
18
2
3
1
2
3
1
2
2
2
18
low score
3
4
4
3
3
4
5
3
4
4
4
3
4
5
3
4
4
4
# of people with min.
1
3
1
1
1
2
4
1
2
16
2
1
2
3
3
2
1
4
2
Skins
HCP
Joe
y
3
3
4
5
5
3
4
5
4
5
38
5
5
4
4
5
3
4
4
5
39
77
74
Bill
y
7
5
4
5
5
4
4
5
4
4

Hi fairchild.bill,
Real experts will I hope chime in, but I think one problem is the way you are referring cells:
Instead of:
value of cell (jcol & irow)
I think you need to use something like:
value of cell irow of column jcol
And
value of cell jcol of row irow
Studying examples of scripts for Numbers 3 at macosxautomation.com may give you some ideas on this.
SG

Problems with generating persistent classes

I've been following the tutorial for generating persistent classes from a
DB. I'm not having much luck:
First, with rd-schemagen, how do you tell it to only work on a specific
schema? I run "rd-schemagen -file schema.xml NBS_ODS_101", but it still
generates the schema file for all schemas in the DB. Is there a usage
option for the tool (I haven't been able to find it yet)?
Second, I have the following tables in my DB: ACT, ACT_ID, ENTITY,
ENTITY_ID. When rd-reversemappingtool runs on these tables, it creates an
ID class for ACT (ActId) which conflicts with the class generated for
ACT_ID (ActId). Since renaming the tables is not an option and I really
don't want to have to rename classes and change the mapping file every
time I regenerate, what is a solution for this problem?
Third, if I do the latter above so I can run the importtool and then I
run "rd-importtool test\test.mapping", it runs successfully for a bit
while spitting out information until I get this:
Exception in thread "main" java.lang.NullPointerException
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.mapForeignKe
y(ImportTool.java:336)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.mapField(Imp
ortTool.java:207)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:78)
at com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run
(ImportTo
ol.java:408)
at com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main
(ImportT
ool.java:385)

Abe White <[email protected]> wrote in
news:[email protected]:
First, with rd-schemagen, how do you tell it to only work on a specific
schema? I run "rd-schemagen -file schema.xml NBS_ODS_101", but it still
generates the schema file for all schemas in the DB. Is there a usage
option for the tool (I haven't been able to find it yet)?Try using -schemas <comma-separated list of schema names>
I apologize for the documentation in this area. We're going to upgrade
the tool and the documentation to a more recent version from our internal
R&D codebase when our 2.5 release comes out in the next couple of weeks.
This release will also include a system for customizing the tool's output
in many more ways.This works:
rd-schemagen -file schema.xml -indexes false -schemas NBS_ODS_101
but this does not:
rd-schemagen -file schema.xml -indexes false -schemas NBS_ODS_101,NBS_SRT_
101
Exception in thread "main" java.lang.IllegalArgumentException:
com.solarmetric.r
[email protected] = NBS_ODS_
101,NBS_SRT_10
1: java.lang.ArrayIndexOutOfBoundsException: 1
at serp.util.Options.setInto(Options.java:206)
at serp.util.Options.setInto(Options.java:168)
at com.solarmetric.rd.conf.Configurations.populateConfiguration
(Configur
ations.java:144)
at com.solarmetric.rd.kodo.impl.jdbc.schema.SchemaGenerator.main
(SchemaG
enerator.java:690)
Second, I have the following tables in my DB: ACT, ACT_ID, ENTITY,
ENTITY_ID. When rd-reversemappingtool runs on these tables, it creates
an ID class for ACT (ActId) which conflicts with the class generated for
ACT_ID (ActId)This is a bug, and will also be fixed with 2.5. I can't even think of a
good way to tell you to work around it for now, unfortunately.I renamed the ID classes to ActOid and EntityOid and changed the .jdo file
to reflect that. Do you see any problems with this strategy?
Third, if I do the latter above so I can run the importtool and then I
run "rd-importtool test\test.mapping", it runs successfully for a bit
while spitting out information until I get this:
Exception in thread "main" java.lang.NullPointerExceptionCan you please send the generated .mapping, .jdo, and .java files?
Unless you want to wait until the 2.5 improvements to debug.I will send you all the files in a zip file by email.

Problem with total page numbers in Scripts

Hi,
I have a problem with total number of pages in the Script.
I have a script of 15 pages.
On every page, I am using &PAGE& of &SAPSCRIPT-FORMPAGES(C)&.
Problem is : I am getting only single digit for SAPSCRIPT-FORMPAGES as long as the page number remains in single digit - like -
1 of 1
2 of 1
3 of 1... till 9 of 1.
But from 10th page, it is printing :
10 of 15
11 of 15
12 of 15... till 15 of 15.
So, i think the symbol SAPSCRIPT-FORMPAGES(C) is filled with value 15 , but it is prinitng only the first digit '1' for pages 1 to 9 and then printing both the digits '15' for pages from 10 onwards.
So, please help me out in this problem.
Thank you.

Hi Ven,
The CONDENSE option cannot be used on the program icon SAPSCRIPT-FORMPAGES
(C) without an explicit length specification: This symbol is
only replaced with a value after the form has been completely edited, as the
total number of pages of a form is first known in the program function
END_FORM or CLOSE_FORM. However, the size of the symbol (number of
characters) is reserved correctly when the symbol first occurs, with the
current page number. Therefore, only one character is reserved for option C
(CONDENSE) on pages 1-9, two characters on pages 10-99, and so on.
If you are sure that the total number of pages doesn't cross 99(i.e 2-digit number), then use the FORM pages as SAPSCRIPT-FORMPAGES(2CZ).
Here Z will suppress the leading zeros, for the total number of pages.
Hope this information would be useful for you.
Reward points if this is useful.
Pavan.

Problem with multiple client numbers from a view

Hi Gurus,
I have a problem with a view
Creates a view with a UNION ALL stmt
=====================================
Create view vw_benifits
as
SELECT
     Client_num, -- can have multiple values like 200,201,250
     PERNR,
     OBJPS,
     ENDDA,
     BEGDA,
     AEDTM,
     UNAME,
     COB_MNTH_AMT
FROM
     STG_SAP_PA9211_TB
UNION ALL
SELECT
     null, -- no client number for legacy data
     PERNR,
     OBJPS,
     ENDDA,
     BEGDA,
     AEDTM,
     UNAME,
COB_MNTH_AMT
from
     LEG_STG_SAP_PA9211_TB;
==============================
The second table contains legacy data (LEG_STG_SAP_PA9211_TB). The first table now contains multiple client data (ie the client_num can be 201,202,250 like that.
Now if the users qery the view they will only get that clients data.
eg selet * from vw_benifits where client_num=250 results only client 250 data. But I want to add the legacy data also with that.
I don't want to propose
selet * from vw_benifits where client_num in (250,NULL) since the users will be confused.
Is there any other way to do this . my requirement is like
If they query
select * from vw_benifits where client_num=250, the data should include all the records satisfying client=250 + the records from the legacy data. The view need to be created like that.
Appreciate your help
Deepak

Hi Thanks for the suggestion.
But I am not sure this may work for me. Here my users may not be able to use that since they don't know Oracle.
I want to hide that details from them
They may just issue a statement like this
select * from vw_benifits where client_num =250
Or
select * from vw_benifits where client_num =400 . But both times I need to show them the data from the legacy table.
Deepak

Problems with formatting negative numbers in Reports PDF web output.

Hi,
I have a problem where all the values in a column are right-aligned. The values are all numbers. If a value is negative, then the value is placed a character to the left, putting it out of alignment with the non-negative values. I can't figure out why this would be.
The problem doesn't appear in Reports Builder, or when the Report is generated to a PDF: File > Generate to file > PDF.
The problem only appears when the Report is called through the web application we've created for our client. It is output to a .pdf in a web browser- Internet Explorer 6.
I am running Oracle 10g.
Any ideas on solving this?
Regards,
James Sharman.

Just some clarification-
in Reports Builder, the values look like this:
100.50
100.00
-100.00
100.00
but when running from the web application, they go wierd and look like this:
100.50
100.00
-100.00
100.00
Regards,
James Sharman.

Problem with generating of numbers NUMBER_GET_NEXT

Similar Messages

Maybe you are looking for