Problem with igo charger on new 80 GB Classic

Just recently purchased a new 80 GB classic (upgraded from an old 20 GB clickwheel model). I had been successfully using an igo charger with tip #61 on the old 20 GB, but with the new 80 GB when I plug the igo charger w/Tip 61 into it, it briefly 'turns on' with the display, but does not indicate it is charging. I called igo and they said I needed a REV 4 #61 tip, sent that to me but it still has the same problem.. Apple has said they did change the charging circuit to the new 80 GB. My apple charger works fine, and my old desktop speaker unit also continues to charge. Only the igo does not work (I have multiple wall chargers/car chargers from igo and none of these will work with the new 80 GB classic). I travel a lot and love just bringing one small charger and multiple tips to charge the ipod/cell phone & PDA.
Anybody having the same issue and gotten around it?

What you're seeing is a problem with the Classics -- the scrolling is much less responsive than prior generations of iPods. Because of the lower sensitivity, you have a hard time scrolling fast enough to see the letters come up. They can if you really try at it, but it's not so easy. This is the only disappointment I have with my Classic.
ps Your 60GB is actually a 5th gen, not Classic.

Similar Messages

Anyone else having problems with popups since the new security upgrade? can't get rid of them

anyone else having problems with popups since the new security upgrade? can't get rid of them

You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

Has anyone had any problems with their charger blowing out?

Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.

Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires

I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?

Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
http://support.apple.com/kb/ht3302
Try a reset aswel:
- hold the home button and sleep/wake button down for atleast 12 seconds
- release both buttons as soon as you see the apple logo appear

Hp Envy m6-1105dx. Problems with my charger.

Product Name: Hp Envy m6-1105dx
Operating System installed: Windows 8
I'm going to keep this simple.
I bought this computer on February 20th, 2013, so up to this date It's been over a month. I've never bought a laptop before, and in just a little over a month...started to have these kind of complications.
Since this is the hardware section, lets start with that.
I plug in my charger, it does not work. I try a second time, and we have the same result. I have to continuously plug the charger in, and out in order to receive a charge.. I call this the "Hopefully it works” method. Problem number two, is that everytime my computer goes to sleep, the charger shows that it doesn’t register anymore....and this sets us back to problem one.
This is a new laptop, so I believe problems with the battery really shouldn't be showing me these kinds of complications. I’m very frustrated at the fact that my laptop’s battery or charger will not work.
For any other information that might help....
Yes the battery is in, Yes my charger is plugged into the wall, and yes I've reset my computer to check if this problem would still Reoccur. The only thing I didn’t do is replace my battery, or charging cable. The reason being is that i just bought this computer.
Thank you very much for reading this topic, sorry for the “Ranting” kind of approach, but I hope you can see my frustration.
Any advice, or basically a solution to my problem will be very much so appreciated.

Unfortunately it appears you got a lemon. It happens. If you have a return right at the point of sale, exercise it. Otherwise call HP and work your way through the phone tree to see about returning it. The only other possibilty is that a BIOS update was just released on 3-15
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116472-1&cc=us&dlc=&lc=en&o...
Of course you are going to have to catch it when it is working and the BIOS update entails a bit of risk if the computer crashes during the update. I would call Customer Service and ask them if they want you to try the BIOS update. Before they authorize a return they are going to make you go in and reset the BIOS to defaults and muck around in there a bit anyway.

Problems with car charger

I dont think i have read anything like this on the forums yet. Im on my second torch and although i like it a lot being (personal opinion) best blackberry yet (functionwide) , I feel it has some issues that are making me think a lot. I had a problem with the first one, i was charging it in my car (original BB charger) and some times i would see the lighting icon with the phone charging and sometimes not. I wanted to know if it was charging or not, so i tested for minutes looking at the battery % and nothing. Then the phone started to overheat and was not charging anymore, i took it to best buy mobile where i purchased it and they gave me different car chargers to test it. I did test it but i told them that my charger was orgiunal blackberry accesory and that i charge a 9700 and a 8520 from my wife. Nothing happened, they gave me a new phone. With the new one i noticed the b atter life was superb, was way better. but after 4-5 days (yesterday) the battery went dead at 5pm with slight use on the day, i tried charging the cellphone while eating, so i left it charging in the car and when i returned the phone was hot and not charging. Im really confused
Things i know>
1. its not the car charger, its charging other BB fine and its original accesory
2. Its not the lighter in my car cause i also charge other phones
please advice

I too am on my second torch in 8 days. I am also having a problem with the car charger. The lightning bolt goes off while charging, especially when I am using AT&T Navigator. The second phone is not as bad as the first one was, but I don't know how well it will do in the weeks to come.
I had this same problem with my original AT&T Blackberry, the 8900. In that case, a battery swap solved the problem. With the Torch, I really don't know what is going on, but this is a serious problem because I use the AT&T Navigator all the time in my business and I have to keep my battery charged.
I hope Blackberry recognizes that there IS a problem and fixes it.

Problem with Snow Leopard on new macbook pro?

OK here's the problem
I just bought a new unibody macbook pro with 17 inch screen because I had previously got a 15 inch and am now selling as I realised it doesn't have an Expresscard slot which I want to help me mix music.
The computer came with Lion and because I use all kinds of software and lots of freeware I actually want to continue using my old operating system (10.6.7) so everything runs as it did straight away.
So I installed the OSX disk that came with the 15 inch MBP on the new 17 inch MBP, and it ostensibly worked..
But now the shortcut buttons like volume and brightness don't work, no matter whether I check or uncheck the box in System Preferences about "standard function keys".. and when I click on Trackpad it claims "No Trackpad found"
Bit miffed..any ideas what's going on?
thanks
J

jcloth wrote:
Bit miffed..any ideas what's going on?
The grey disks come with hardware drivers that are specific to a particular Mac model.
You also cannot boot from OS X install disks that are earlier than what the Mac came with from the factory (in this case Lion)
Your in luck that you have another Mac, because all you need is a Firewire cable to (first step) hold T boot the new Mac's hard drive to the desktop of the older Mac.
But you need the Snow Leopard retail install disks (white, not grey) to (second step) c boot off the older Mac so you can Disk Utility Erase and format HFS and install Snow Leopard on the new Mac.
Snow Leopard will boot off some 2011 Lion Mac machine because the hardware drivers exist on Snow Leopard disks, just have to have the right disks and the grey disks from another Mac doesn't do it.
You may want to take a look at this thread, there are instructions to combine the 10.6.3 and the Combo Update into one disk and more help.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
Once you get Snow Leopard working on your machine, be sure to make a Carbon Copy Cloner or two to a HFS external drives as you have no boot disks.

Problems with overage charges and making account changes on line

I have quite a bit of history involving my attempts to resolve the problem of catching my account before it goes over the minutes allowed and making the changes on line (to cut down on call volume) to change my account to raise the minutes allowed for that billing cycle. I was given one reason why it didn't work the first time (I didn't print out my confimation proving I made the changes - bit the bullet and paid those charges) and so the second time wanting to avoid the problem from the first time I made sure I printed out my confirmation. The confirmation had an effective date of change of 07/19/2012 the day I was informed I was nearing my allowed minutes. There were only 4 or 5 maximum days left in that billing cycle so I wanted to nip the problem in the bud and make the changes to my account to be made "that" day. My confirmation said the changes were effective 07/19/2012. In plently of time before that billing cycle ended. Again I was told I did something wrong. This time I'm holding my confirmation in my hand even as the person is telling me again I did it wrong. The purpose Verizon wants it's customers to use the available on-line option is to cut down on their call volume. I didn't go to school to get the knowledge apparantly needed to perform these particular tasks in a manner that is acceptable to Verizon. Has anyone else had problems with trying to fix their problems themselves using Verizons "helpfull" on-line choice?

I have an explanation for you by what was meant by "you did it wrong."
When you make a change effective the date you are requesting it and not at the start or end of your billing cycle, your minute usage for that month is pro-rated.
For example, you say you made a change, because you were nearing your allowance limit, on 7/19/2012 and wanted it effective that day with 5 days left in the billing cycle. Lets assume that your allowance is 700 minutes/month and you were at 675 minutes for that month(still under your monthly allowance). If you make a change effective with 5 days left in your billing cycle to the 1400 minute/month allowance, your allowance for the 1st 25 days of your cycle will have been pro-rated to (25/30) * 700 = 583 minutes. This would mean you would have already had an overage of 92 minutes for the 1st 25 days of the month. Additionally, you would have a pro-rated allowance to use the last 5 days of (5/30) * 1400 = 233 minutes. This is how the pro-rating works when you make a change effective during the middle of your billing cycle.
What you need to do next time to avoid these overage charges is to make the change effective at the beginning of your current billing cycle. So if you had made the change on 7/19/2012, but your billing cycle ended on 7/24/2012(5 days later), you should have made the change effective at the beginning of your current billing cycle, or 6/24/2012. This is called backdating the change. In this instance, you would have received a credit on you account for the cost of the 700 minute plan and been charged the full amount for the 1400 minute plan on your next bill, which I believe is a net additional charge of $10 and you would have had the use of 1400 minutes for throughout the entire month. In this example, you would not have had any overage with your 675 minutes during the 1st 25 days of your cycle and would have been able to use 725 minutes over the last 5 days of your billing cycle. This is much better than the overage charge you would receive with 92 overage minutes @ $0.45/minute = $41.40.
I hope this explains it.

Problems with migration on a new install

I turned on my new 27" iMac, and when it asked if I wanted to import info, I was not ready because I did not have the right cable to connect my Time Machine External B/U, so I passed, and created a Bootcamp partition.
I installed Windows XP just fine, and then installed Parallels on the main admin account, and made sure it worked. then tried to import my prior user account by connecting both computers with an ethernet cable, and turned on file sharing. I had problems with lots of spinning beach ball of death on the old mac, so I figured moving to the new machine would get rid of it.
So I used Migration assistant to import from my current computer connected with Cat 5 cable, and it got 99% of the way through, then hung, like it could not gather the final info from the old computer to finish the migration, so I forced quit Migration on both computers, since there is no other way to exit w/o a successful install.
The account was there, though when I log in as that user, I see lots of folders I don't have permission to access like my documents and downloads.
So I go back to the old computer, and do an updated time machine back-up, then connect that external HD to the new iMac and do a 2nd import to a fresh user. All goes well, and I am able to log in, however, my new install of Parallels does not show up on the desktop, rather my old Parallels shows up with its different name. And I am getting spinning beach balls for 10-20 seconds in Safari, which I don't like, as something from the old computer must be corrupt to be doing this like a preference file or ?.
I have had a Mac since the early 1990's, and always only had one account that I used to run the computer, never creating a "User" account to run day to day, and I am not fully understanding the relationships between admin & user.
So my questions are;
1. what is the best way to take my documents, movies, photos, music and such from the 2nd migration, and transfer to a freshly created user account that would have no corrupted preferences causing the spinning problems. Do I put them in the shared folder, then access them from the new account, and transfer them that way, or does the admin do it?
2. What do I do about the applications that were imported, can the main admin move them and possibly the above documents to the main applications folder?
3. What about fonts and such, should they be put in the main library, or a user library?
4. Where can I find info on the allowable actions & limits of admin and users? what they can & can't do.
5. On my admin desktop, I can see my HD, Bootcamp partition, and Parallels shortcut. It is not visible on my test account, or another user account I created for #1 above. How can I give that user access?
6. How can I access the new Parallels install that shows up on the admin hd, instead of the old imported one in my user account?
7. How can I access the 2 external HD's that show up in admin and not users?
8. Can I safely delete the user that was created from my first unsuccessful migration that I had to force quit and has permission issues?
Thanks for your help, really appreciate getting up to speed on users...

No offense, though none of your replies are of any help. I am not migrating from a PPC to Intel, I don't need to reinstall, I am not a new user migrating for the first time, and I am not having any font problems.
Let me try again.
If I have a problem with an imported user account like it hangs doing certain things, how do I move all the data to a new user on the same PC, just drag all the documents, library, and similar folders to the shared folder, or the user folder?
Users/Shared
Users/User
Any help is greatly appreciated.

Problem with Ipod Touch and new software (2.2.1)

After upgrading to the 2.2.1 I have been unable to listen to it using my car stereo. It will only recognize my ipod sometimes and when it does a majority of the time there will be no sound at all. On my car stereo it shows my playlists and everything but no sound. I never once had a problem with my ipod or stereo until I did this upgrade. I tried switching out the usb cord but that did not help. I then restored my Ipod. I also tried to wipe out the battery completely and then charge (heard on a different message board that that could possibly help). Still having the problem though. I have an Ipod touch and a Pioneer stereo with the USB cable hook up.

yeah i'm having the same problem i have a pioneer navigation system and it will not play my ipod touch after upgrading to 2.2 i called apple to try to find a way to downgrade and they never gave me an answer

Problem with ownership/privileges of NEW external hard disk

An external La Cie drive died on me this morning. I replaced it with a brand new one on which I copied all my files from a back-up. Everything went OK. I gave the new disk the exact same name than the one that had passed away and that was enough for QuarkXpress to figure out the correct location of images imported in various documents.
I then stumbled upon an unexpected ownership/privileges problem with an European piece of software, Ragtime, that will not allow me to do anything but read a document, claiming that "I do not have sufficient privileges".
I tried to grant myself such "privileges" in the Get Info window, but OS X refuses, stating once again that I do not have sufficient privileges to tinker with the system.
I am all by myself, I am the owner/administrator of the machine and don't know what to do. I called Apple Care, but they claim that I'm not entitled to any help because a) the problem occurred with a disk not manufactured by Apple and b) the software I was using is not manufactured by Apple.
Underprivileged
G5 Mac OS X (10.4.7)
G5 Mac OS X (10.4.7)

Hi, okapulco. Welcome to the Discussions.
I presume this is when using Ragtime in an attempt to work with documents on the new FireWire drive. I suspect your former LaCie drive had been set-up as follows:
1. Open the Get Info window for the FireWire drive.
2. In the Ownership & Permissons pane, select "Ignore ownership on this volume."
3. Close the Get Info window.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Problem With PSE-2 and New 1.5 TB Drive

Hi all. First of all, I've been using my registered PSE-2 for several years with no problem. AMD Athalon 7750 dual core at 2.7 Ghz, 2.0 G Memory. WD 1.5 TB primary and WD 500 GB secondary drive.Win XP SP3. I recently had a drive fail and installed a new freshly formatted WD 1.5 TB as my boot drive. Fresh install of WinXP and updates. Now when I install Elements, it appears to install fine. The problem comes when I attempt to start it the first time I get "Could not initialize Photoshop Elements because the scratch discs are full". Then Elements closes, thus not allowing me to do anything with the internal configuration of the program. I have tried unistalling and installing to the 500 GB drive, but still get the same error. I have increased my page file memory Does anyone know of a problem with installing Elements on a large drive or can anyone offer a possible solution to what I am seeing? Thanks in advance for suggestions...
JohnR.

I think Barbara meant photoshop 7, which was out a little before pse2.
If you hold down the Alt+Ctrl keys just after you start pse2, a dialog
should appear allowing you to choose the scratch disk (keep holding
the keys until the dialog appears)
If you have a recovery partition on your hard drive, try choosing this for
the scratch disk and then exit pse2. Then restart pse2 and from
Preferences>Plug-ins and Scratch Disks choose your regular hard drive for the scratch disk.
Newer versions of pse, at least newer than 3 or 4 don't seem to have this problem.
MTSTUNER

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Problems with old library on new notebook

i just got a new notebook and installed itunes and wanted to import my library that i copied to an external drive from my old notebook (the iTunes Music Library.xml and the iTunes Library iTunes Music Database File). there - same as on the new notebook, too - my whole itunes music libraray was one single music folder with several subfolders. the difference, which now causes major problems are the drive letters of the partition that folder was on on the old notebook and the one on the new one. formerly it was e:, now it's f:. therefore the entries in the library files refer to files which actually are on my notebook, but not on the e: partition anymore, but on the f: partition!
so i added the whole music folder to the library again, and i had my music back in itunes, BUT all the playlists are still empty. is there a way to "update" the library files with the new location of the music files? since i have pretty many playlists with a whole bunch of tracks (ipod classic 160gb with some 55% used) it would be a quite annoying and time consuming work to add all the tracks manually.. and also the automatically generated playlists like recently added and played and mostly played are very important to me - with the respective dates added and played and play counts etc.
so, is there any way to do that, or do i have to add all the tracks to the playlists manually?
thanks
Message was edited by: necrophyte

hey, just wanted to say that i finally managed to do everything as imagined at the beginning. i simply uninstalled and reinstalled itunes and deleted all the entries/files (local settings & app data in winxp) that dont get removed by just uninstalling itunes, then copied my old .xml and .itl files over the newly created default equivalents, then imported them, and all my playlists and files appeared correctly (no double playlists etc. as before), but just with the exclamation mark, since they're referring to the "old" partition. then just changing the itunes music folder from default to my notebook's partition and folder where all the files are stored fixed everything - since i didnt modify anything since making the backup from the old notebook, everything's 1:1 the same, even when i attached my ipod id didnt ask me anything like different library or so, it just tried to sync it, but since no change since last sync on old notebook, nothing to add/remove, so now i finally got to the same state as before with the old notebook.
thanks for helping me!
Message was edited by: necrophyte

Problem with Mail not showing new messages

Since 2 weeks, my Mail does not show any of my 'hotmail' messages receive. The connection diagnosis said there are no problem with the account and server. It seems to download incoming mail (which also show in hotmail) but Mail does not show any new messages.

Back up all data.
Select the problem mailbox in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar.

Problem with igo charger on new 80 GB Classic

Similar Messages

Maybe you are looking for