Problem with importing software components into Integration Builder:Design

Hai everyone
I m trying to import software component versions,through SLD in PI 7.0
It says unable to read software component versions from SLD "nw2004sxi:50100"
where nw2004sxi is my computername and 50100 is my j2ee http port.
Your help would be highly appreciated.
Regards

Hai there
I have been finding difficult to find the solution to my problem.I would really appreciate if someone can see my error log clearly.
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Stack trace for the above error message is:
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
     at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
     at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
     at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
     at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
     at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0.getXIDomain(SLDAgentObjectImpl0.java:375)
     at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
     at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
     at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:137)
     at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:100)
     at com.sap.aii.mdt.util.MmMainModel.getMsgCompList(MmMainModel.java:262)
     at com.sap.aii.mdt.util.MmMainModel.getListModel(MmMainModel.java:244)
     at com.sap.aii.mdt.util.SelectModel.getListModel(SelectModel.java:135)
     at jsp_monitor_new1288070144218._jspService(jsp_monitor_new1288070144218.java:188)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:418)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:349)
     at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
     at jsp_FC_Secure1288070041500._jspService(jsp_FC_Secure1288070041500.java:26)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
5 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.01.nw2004sxi - Integration Server unable to specify a JCo client - No component names available from Integration Server -
Hope i can get the solution for my problem.I m sure u wil get rewarded with points
Regards

Similar Messages

Importing Software Components into Integration Builder (Design)

Hi
I have successfully installed XI 3.0 and have done post installation configuration. Could you please point me 1. how to apply the patches specified in the document
I have created Technical system and Business system to associate with it. Now I want to import those software components from SLD into my design time Integration Builder. While I do this I am gettin an error "Interal Occured" - Details of the error list 2 numbers one being Null Point Exception. Could you please tell me what could be the possible problem and the way to resolve. Is there a do it yourself kind of a document to learn development in XI, ie step by step instruction right from Data object, message object, interface object, business scenario creation etc.
2. Is there a special step to follow to get the Adapters link up and running withing XI 3.0 web browser. Cos. at the moment, its invoking another window with local port number followed by :800, but it has an error saying "File Not found"
Please reply, really appreciate it.
Best Regards
Shiva.

Hi Shiva,
your second problem should be resolved, if you apply all available Patches to XI 3.0 (i.e. until SP Stack 03). I guess, that also the internal error in Integration Builder will be resolved by applying the patches.
There is an OSS note 670388 that explains how to patch XI 3.0. It should explain all your questions towards patching.
I would suggest to apply all patches and then check again, if those errors mentioned still exist.
Best Regards
Christine

Problem when import software component into integration

Hi all:
Could you please help me with the following problem?
I crated some software component in SLD. Then I tried to import it into integration builder design
through tools ---> transfer from SLD --->
import software component Versions, the system prompted
me that cann't access Ecc0101:500000(on which PI is installed).
Could you please tell me the possible reason why
such an error happen ? or how to trace the problem ?
is it regarding message server or something else?
Thanks in advance !

Hi,
you should check your SLD connection:
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards
Patrick

Not able to import SLD objects into Integration Builder

Hi,
while importing objects from SLD into Integration Builder , am getting no authorization to import objects from SLD.
Plz let me know how to solve this issue.
Thanks,
Satya.

Hi Satish,
Check the link and aks your Basis/Authorization team to provide proper Roles to your user.
http://help.sap.com/saphelp_nw04s/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
Regards,
Naveen

Problem with importing software component versions from SLD to I.R

Hi Guys,
I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
Regard's
Kiran.B

In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
Also check with Tcode SLDCHECK too

Problem with importing scanned photos into iPhoto

I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
Can anybody help?
Many thanks in advance for any assistance.
Sir Leicester

Did you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
OT

Problems with importing mp4 files into iTunes.

Hi all,
Since a few days I am the proud owner of an iPad 2. When I was looking for a solution to sync my video files (no problems with my pictures nor with my music files), I saw that I had to convert them from .avi to .mp4.
Through this community I learned that there were several free and paid options. Such as handbrake, convertavitomp4.com, etc etc
In the end I have tried around 4, but when trying to get the files into my library of iTunes it fails. In the beginning I did not receive any error message. It just did not work. I tried through CTRL-O, drag and drop. Nothing seems to be working.
Does it have something to do with the fact that I have the newest iTunes (10.5) and the latest OS for the iPad?
Does anyone have The same experience or knows a solution?
Thank you in advance,

Hi Swen,
I am checking out flex player after your recommendation. However, I have since resolved my problem. I am running windows 7, 64 bit, and discovered that the problem was windows 7 security settings. All my itunes data was on a hard drive that I plugged into my new pc running windows 7. Despite allowing me to access the hard drive in the usual way, I discovered (after some help from someone more knowledgeable) that the problem was that all my itunes data was protected and I did not have "full control" rights in the security settings. Very odd, given that I have only one user account on the pc. And why it could not tell me what the problem was I don't know. But what I did was right click the drive and make sure my user account had "full control" rights and now I can drag and drop movies into itunes. This may not fix your issue but hope you resolve it soon.

Problem with importing premiere project into after effects

Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?

Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium

Not able to import software component into Integration Repository from SLD

Hi,
I am new in XI(PI). I have created Technical system, business system and software component properly.
But when I go to IR and import the software component, it gives me an error message +*'Unable to read software component versions from System Landscape Directory "sapxi:50000".
Can anyone tell me the reason for this...and solution...Please help me out...
Thanks/Regards
Dinesh Singh.

Hi,
As your question says that,your are not able to import your software component version in to IR.
First better you cross check your software component is available or not in the SLD.
Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
Just check if the replies in this thread help you:
unable to import from SLD
Unable to read software component versions from SLD
Please reward points
Thanks
Vikranth

Problem with importing a video into Lr.

Should I be able to import a home video from a DVD+RW disc into Lr?

Thanks! Now the frustrating thing is that the client doesn't want to use what I created after all...bah humbug
It's not the RAM (which is either 8GB or 16....not sure on that computer). Got an e-mail from Boris Support that implied that this will happen all the time...that you have to export all projects before you use them in FCP or DVDSP or the Continuum filters won't work (loved how the support person suggested that I just use the filter in FCP...which defeats the purpose of creating something in Motion! But I digress...) Told me I had to buy a $500 program called Automatic Duck to get things to import properly...and that Boris filters won't work with the latest upgrade of FCP, btw.

Problems with importing video tape into iMovie '08

I'm using a canopus advc 110 to import video tapes from a vhs recorder into iMovie. BUT, the process often stops after only a few minutes when I still have a long way to go. I'd like to be able to leave it to work for 20-minute chunks (longer if possible, but I think that's about the limit), but it keeps stopping after a few minutes. When I come back in the room, it keeps trying to import (time in upper right corner keeps going) but had quit earlier according to time on the lower center of the iMovie screen. This is adding to my frustration and time, which is limited. Any suggestions??

The canopus advc 110 will work IF you have a perfect tape.
Look at the Grassvalley ADVC300 it has the ability to compensate for bad tapes. Using Line Time Base Correction (LTBC), ADVC300 instantly cleans, stabilizes and preserves old VHS and Hi8 videos in clean DV format. No need to monitor, just start and forget. Fast forward the tape all the way and then rewind all the way before import will never hurt.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
The ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey bit it WORKS.
I would use iMovie 06 with iDVD 08/09.
iMovie 08 and 09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
Your workflow is editing DV clips and making DVDs, so iMovie 06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
iMovie 09 is a wonderful programs assuming that you're using it for what it was designed to do, assemble videos to share on the Internet.

Issue with Importing Software Licenses Into the Asset Intelligence Catalog

I'm trying to import a MSVL spreadsheet into SCCM 2012. Everything I have found so far all points to SCCM 2007 not 2012.
I save the Licensing Summary tab as an CSV and save it on a share on the SCCM 2012 server. When I run the wizard to import the
files I get the following error message.
Error: Importing file:
We will now import Microsoft licensing information from the file \\******\******\*********.csv into the Asset Intelligence database.
Errors
1
Unable to open the licensing statement file.
I have also tried the same as an
XML (spreadsheet) with the same result.
I sent a copy of the spreadsheet to the Microsoft licensing team and they assured me it was a standard claret report Any ideas what else I should
be doing or checking for?
Thanks in advance.

Go to the following link:
https://www.microsoft.com/Licensing/servicecenter/Downloads/DownloadsAndKeys.aspx
Go to Licenses>License Summary
Click “Download all License Information” on the right side.
The CSV should have the following fields:
Product Pool - License Product Family - License Version - Effective Quantity - Unresolved Quantity - Active SA Quantity
Using above method I have successfully managed to import license info in SCCM 2012 R2
-RG

Problems with importing Captive 3 into Flash CS3

Please help!! I was excited to get Captivate 3 and think it
will export into Flash CS 3 as a movie clip. But, got error "cannot
find Slide_1_0.swf". No background of screen shots either. What did
I do wrong?
I have a project due next week that I need to import some
captivate movies into my current flash file. I was hoping this
Captivate 3 can help, but now it's not working for me. Can someone
please point me to the right direction? Thanks a lot! Appreciate
your time and kind help.

Welcome to our community, value11
I'm nowhere near knowing anything about Flash, but perhaps
the link below will help you sort things.
Click
here
Cheers... Rick

Problem with importing images into time lapse

Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
Stuart

Unfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Problem with importing software components into Integration Builder:Design

Similar Messages

Maybe you are looking for