Problem with iPhone 5: Wifi Only Works When Close to Wifi Router

I've recently updated my iPhone 5 to iOS 6.0.2. I am actually having a problem with the wifi connection. In which, I can only uses the wifi when I'm close to the wifi router.It seems when I'm further than about 2/3 meters away from the router I get no connection, and then sometimes (not often) I get it and then it goes again.
Any suggestion on how to fix that?
Thanks.

Having exactly the same issue,  WiFi on 6.0.1 worked fine for me.  Now I have to be sat next to the router.  I've tried forgetting the newtworks and joining them again and no joy.  I had 4 known networks and none of them work.  Will there be an update for this? 6.0.3?  Or are we stuck with it?

Similar Messages

  • What's wrong with my MacBook, it only works when its plugged in to the wall charger

    my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

    Marina -
    What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
    I'd take it to Apple and have them troubleshoot it for you. 

  • I think something is wrong with my battery. Only works when plugged in.

    My battery says its fully charged but only works when I keep it plugged in. I was using it yesterday and it just shut off randomly and started this stuff. I have no idea what I should do. Help?
    It's a 2007 black MacBook if that makes a difference.
    Model Information:
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          102a
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          4158
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          4186
      Health Information:
      Cycle count:          489
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12504

    Even though it says Normal the Cycle count is well above the 300 considered the maximum for the battery. Plus your Amperage is at 0.
    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • After installing 7 on my iPhone my Safari only works when I am at home near my network

    After downloading 7 on my iPhone my Safari only works at my home network
    I want to be able to get on Safari everywhere again

    I talked to AT&T and Apple.  ATT says its the phone and Apple says its not the phone.

  • I have a MacBookPro running 10.6.8. I use Bluetooth to link to devices including keyboard and magic trackpad. I bought a Bose Wave III stereo and a bluetooth device. No problem with iPhone, iPad, wife's MacBook. Not working for me. Thoughts?

    I keep receiving an errror message that "there was an error with the device." I use bluetooth for all sorts of things, no problem. Anyone have any suggestions?Because the stereo is connecting no problem to every other device, I'm assuming there's an issue between my laptop and the stereo. Thanks.

    Apple might fix the problem with SL; they did release the 10.6.8 Supplemental Update, which fixed an HDMI problem. So we might get a fix.
    Don't know if this problem affects Lion. I haven't read much about it, since I'm not upgrading for another few months.

  • Problems with iPhone 5 wifi

    I'm having trouble picking up wifi on my iphone 5 everyone else in house has a iPhone 4 and there's is fine any one else experience the same problem.!? I've only had it a few weeks but wish I had stuck with my iphone 4....:(

    Many people are having the same issue.  My wife has a 4S and I still have my old 3G phones and their wifi signals are fine.  The iPhone 5 has had nothing but problems with wifi since release. 

  • After I installed iOS7.7 on my iphone 4, it only works when plugged in, overheats and plays random music. HELP!!!

    My iphone 4 has been acting up since I installed iOS7.1. It only works while it's plugged in, overheats while charging and randomly plays music.HELP!!!

    Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
    http://support.apple.com/kb/HT1808

  • Why my wifi connection is unstable? I have an ipad 4 wi-fi and my net connection only works very close to my router!

    My wifi connection only works well if i am really close to my router. My notebook connection runs great either close or far from the router! What can i do about that? Thank you!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Serious problem with MSI RG54SE WiFi Router

    Hello to all,
    Since i bought MSI RG54SE WiFi Router yesterday after configuring the network i've downloaded the latest FirmWare (v1.2.8 G) Right after this the router changed the name of the network and now i can do nothing to use the wireless network. LAN works, but as soon as i try to make some changes to the settings of the router (using the 192.168.1.254 address in my browser) it kkeeps giving me this error:
    " ASP Error
    if(getIndex("pingWanAccess")) write ("checked"); "
    This error appears in the IP Settings section right next to the "WAN Echo Reply:" option.
    Because of this error the save button does not appear at all and it seems that i can't do nothing to change it. :(
    Now i don't have WiFi at all and i have the router for 1 day only :(
    Please help me to solve this problem.
    P.S. Note that I've tried too find the older firmware in order to install it but i can't find it nowhere. Also i tried to reset the settings to Factory Defaults but this doesn't work also.
    thanks in advance for your support.
    George

    STU thank you for this advice... actually yesterday i tried to send my question, but nothing happened. Now i tried once more and i succeeded!
    I will keep you up to date with the development of this problem. I hope it will help others too.
    Meanwhile i would like to ask if you know of any available drivers for MAC G5 OSX 10.4.10 so that i will be ableto use the usb stick which comes together with the router. So far i was unable to install it and the MAC does not recognize it at all.
    Thanks again
    George

  • My iPhone 4 will only work when it's plugged into the wall charger. What can I do ?

    Please help.

    Hello DaShiaa,
    I would be concerned too if my iPhone would not power on unless plugged in.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Is anyone having problems with iPhone 5 not vibrating properly when receiving calls? It seems to vibrate once and stops?

    When receiving a call, my phone only vibrates once even if its on silent or not. I have checked all the settings and all appears ok. It works sometimes and doesn't other times. Does anyone know how this can be fixed?
    Thanks

    Maybe your buzzer gets stuck when it vibrates? Try playing it by creating a custom vibration. Does it keep working properly then?
    If that works, try setting up another vibration that should be played when someone calls you.

  • Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

    After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker.  What to do?

    Hi jlk166,
    I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/kb/ts5196
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    fighter19lisa wrote:
    that only makes it say its synced, when its not.
    No, it does not.  It transfers purchases from the iDevice to the computer.  The computer must be authorized for the Apple ID that the content was acquired with.
    fighter19lisa wrote:
    my playlists wont show up on the phone.
    Are they selected to sync?  Is Manually Manage content on the device selected?
    fighter19lisa wrote:
    i had to change my password for my aol account again and i still cannot get my email on my phone to even work
    What does that have to do with syncing content to the device?  FYI, nothing.

  • IMessage in my iPhone 4 stopped working over 3G and now its only working when i connect my iPhone to Wifi!!! please help

    as mentioned in the subject. i was enjoying sending msgs using iMessage using 3G internet connection but since yesterday my iMessage stopped working and now its only working when i connect my iPhone to Wifi !!!
    without WiFi it show my Message Not Delivered in Red !!
    and this issue not only with me.. even with my freind. so please help to find a solution

    I know why. It happened to me before. Try typing random stuff, eg aaasjddjfndirinfekdnkedindor , into the text box, then delete everything using the x-arrow on the keyboard. It should work now. If not, repeat the process again and again. It's because it needs to send the signal to the other recipient(without him really knowing it, this is to check that he can see when you are typing, you know, the "…" bubble), then check that you have 3G at good speed, then enables iMessage. It works for me this way...hope it does for you too (:

  • Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

    Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
    When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
    I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

    Send it as html so the signature is an image source URL

Maybe you are looking for

  • System.last record on Library

    I have to convert this type of code from program unit into library. The problem is I can't pass ":system.last_record" as parameter because it must get its value while reading the block. With these code in library, compiler flag bad bind variable erro

  • How to view semantic css based layouts in design view in dreamweaver?

    Hi all, I havent had a lot to do with CSS based layouts (tables have alwasy just worked for me fine) but I am wondering how do I view the semantic/css based layout in design view in Dreamweaver? As when I write the code, in design view its not showin

  • RAID 1 (mirroring), cloning and booting...

    After recently buying a new dual quad-core, I wanted to expand the hard drive space a bit, and enhance the security of a part of the data. Having a 500G disk in bay 1, I planned on putting one additional 500G to create a mirror with the original one,

  • Value type 61 (Down Payments) may not be carried forward in FM area

    Hi Friends, We have implemented Fund management in FY 2011. My requirement is i want carry forword budget down payment to nex fiscal year , plz suggest to configuration step , Process and Impact on Existing system. In FM budget When i  m trying to ca

  • Content tree contains cycle?

    hi, I compiled a schema, which has no problem for sure. When i want to marshal my data into XML using that schema, JAXB says content tree forms a cycle? any idea on that? thanks in advance,