Problem with JDBC Connection for HDB hanadb 02
Hi folks,
Ok I have an instance based on the 7.4 SP5 HANA CAL solution.
But when I suspend and restart the R3 system doesn't start again.
I've followed the instructions in the user guide and can access the backend instance and see that for HDB GetProcessList everything is GREEN, running
while for A4H GetProcessList everything is GREY, stopped
When I try to start the A4H instance I get
Checking HDB database
Database is not available via R3trans
Database must be started first
The messages I found on SCN suggested this might be a license problem with the HANA database, so I tried to follow the install license instructions for the HANA database via the HANA studio, but when I try to open the HDB(SYSTEM) > Properties > Licence, I then get the messages
Error while reading the licence information from system HDB hanadb 02
Reason:
Cannot retrieve JDBC Connection for HDB hanadb 02
So what do I try now?
Any suggestions?
Rgds,
Jocelyn
Thanks Ivanka! That sorted it.
For the benefit of others...the error message was found in the server log files
/var/log/applianceagent.log
/var/log/appliancedeploy.log
Similar Messages
-
Problem with JDBC driver for Oracle 10g
Hi.
I've successfully accessed a MySQL database via a DataSource from a servlet (that uses a DAO). However, when I try to do the same with an Oracle 10g Database, I get the error message:
Cannot load JDBC driver class 'oracle.jdbc.driver.OracleDriver'
I'm using J2SE1.5.0/5.0 and ojdbc14.jar, the latter of which I downloaded this afternoon as the latest driver JAR available on the Oracle site. As with the MySQL driver, I've placed it in the commons\lib folder within Tomcat. (I've also, of course, made the necessary modifications to server.xml and web.xml.)
Upon examining the ReadMe file at the top of the Oracle download page, I found that the oracle.jdbc.driver package is now deprecated and all references to oracle.jdbc.driver should be replaced with oracle.jdbc. However, I got a similar error message when I tried this modification. Upon examining the contents of ojdbc.jar, I found that the driver was there and that it was, in fact, still oracle\jdbc\driver\OracleDriver!
It appears as though the Oracle site has not been updated with a driver that matches its latest documentation. However, this does not explain why the driver is not even being loacted when it is in the correct place. Can anybody shed any light on this? Any help would be much appreciated.
Thanks in anticipation.
Cheers.
JanI've successfully accessed a MySQL database via a
DataSource from a servlet (that uses a DAO). However,
when I try to do the same with an Oracle 10g
Database, I get the error message:
Cannot load JDBC driver class 'oracle.jdbc.driver.OracleDriver'
That's different from a ClassNotFoundException.
>
I'm using J2SE1.5.0/5.0 and ojdbc14.jar, the latter
of which I downloaded this afternoon as the latest
driver JAR available on the Oracle site. So you got ojdbc14.jar or ojdbc14_g.jar under the 10g drivers?
As with the
MySQL driver, I've placed it in the commons\lib
folder within Tomcat. I think it's a better idea to put in the WEB-INF/lib directory of your Web app rather than commons/lib. WAR files are a very good idea, too.
(I've also, of course, made the
necessary modifications to server.xml and web.xml.)So you're using a JNDI data source? It sounds to me like that's where the problem is.
You should not have to edit the server.xml at all. If you put the <ResourceParams> in a context XML file with the same name as your WAR file into the TOMCAT_HOME/webapps directory it'll be picked up automatically. (It might also be accessible in the META-INF directory for your app, but I haven't done it that way.)
Upon examining the ReadMe file at the top of the
Oracle download page, I found that the
oracle.jdbc.driver package is now deprecated and all
references to oracle.jdbc.driver should be replaced
with oracle.jdbc.
However, I got a similar error
message when I tried this modification. Upon
examining the contents of ojdbc.jar, I found that the
driver was there and that it was, in fact, still
oracle\jdbc\driver\OracleDriver! The fully-resolved class name you should be using MUST match the class that's in the ojdbc14.jar that you're using. Look in the JAR for the definitive answer: the one that I downloaded is still using the oracle.jdbc.driver package for OracleDriver.class. Ignore the docs - use the name that's in the JAR.
It appears as though the Oracle site has not been
updated with a driver that matches its latest
documentation. That often happens with docs.
However, this does not explain why the
driver is not even being loacted when it is in the
correct place. Can anybody shed any light on this?
Any help would be much appreciated.I think the problem lies in your web.xml and server.xml
I'd recommend that you decouple the JDBC from the Web app for now. See if you can connect to Oracle using a simple desktop app and leave the Web piece out of the equation for now. Once you can do that, you'll be certain that the parameters you're using are correct and you can turn your attention to getting the Tomcat configuration right.
PS - I'm using Oracle 9.2.0.1 and Tomcat successfully right now, so it can be done. -
Problem with JDBC driver for mysql
I have downloaded the Connector/J3.0 mysql-connector-java-3.0.7-stable.tar.gz from www.mysql.com/downloads/api-jdbc-stable.html web site and used gunzip and tar to extract the file. I have received the following error message:
tar: directory checksum error
Will this error cause some problem later on?
Which directory should I put the driver into? Can I put it in any directory?
Do I need to set the classpath for the driver? If yes, how can I set it?
What is the connect string? Can you give a sample for me? I am using Solaris 5.8 and mysql is on the same machine.
Thanks a lot,
Lisathis is an example of a connect string for mysql that i used...
public Connection CreateConnection () throws Exception
Connection myConn = null;
String driverName = "org.gjt.mm.mysql.Driver";
String dbUrl = "jdbc:mysql://www.desres.com/jhazrd?user=jhazrd&password=????";
Class.forName(driverName);
myConn = DriverManager.getConnection (dbUrl);
return myConn;
} -
Problem in - JDBC Connection for MS-Access in JSP
Hi,
I am using Three tier Architecture. that is MS-Access as a Database, JAva Web Server as a server and HTML as a frontend.
I always getting error during the execution of JSP code.
Coding in JSP:
<%@ page import="java.sql.*"%>
<%
java.sql.Connection con;
java.sql.PreparedStatement pstmt;
java.sql.ResultSet rst;
String sDBQ= application.getRealPath("dem.mdb");
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ="+sDBQ);
pstmt = con.prepareStatement("select * from employee");
rst = pstmt.executeQuery();
if (rst.next())
String s1=rst.getString("EmployeeId");
String s2=rst.getString("EmployeeName");
out.println(s1);
out.println(s2);
catch(Exception e)
out.println("Error "+e);
%>
I'm getting this error
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name too long
Please anyone rectify ithi
[Microsoft][ODBC Driver Manager] Data source name(dsn)
con=DriverManager.getConnection("jdbc:odbc:dsn);
first you open the control panel --open ODBCdatasource--user dsn--click add--and select MS-Access--click finish--one window is come --type "dsn"--then click ok --ok .then try it it will come.(before you doing program you can set this) -
Problems with JDBC Connection, invalid Oracle-URL
H,
i can't use a JBDC Connection. Maybee i tried a wrong oracle url syntac
This Url jdbc:oracle:thin@bilent:1521:bilent throws an error
java.sql.SQLException: invalid Oracle-URL
The following parameter worked
Driver :thin
hostname:bilent
JDBC Port:1521
SID:bilent
What is wrong in the oracle url?
THANKSHi,
You are missing ":" after thin and host name. Your URL should be
jdbc:oracle:thin:@bilent:1521:bilent-Arun -
I have a problem with JDBC Realm in Tomcat/Oracle/Win XP
I have a problem with JDBC Realm in Tomcat.
I have attached my server.xml file located in the
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\server.xml
The Problem is that when I login I get the user name and password prompt but it does not resolve.
When I enter in the tomcat-users.xml password with memory realm uncommented it works fine.
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\tomcat-users.xml
Is there a cache or something I need to reset for the JDBC Realm to work?
I have attached my tables and contents as well...
Did I miss something????
Thanks
Phil
server.xml
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
</GlobalNamingResources>
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@localhost:1521:orcl"
connectionName="testName" connectionPassword="testPass"
userTable="users"
userNameCol="user_name"
userCredCol="user_pass"
userRoleTable="user_roles"
roleNameCol="role_name" />
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
</Host>
</Engine>
</Service>
</Server>
Tables
create table users
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
create table roles
role_name varchar(15) not null primary key
create table user_roles
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key( user_name, role_name )
select * from users;
----------------------+
| user_name | user_pass |
----------------------+
| tomcat | tomcat |
| user1 | tomcat |
| user2 | tomcat |
| user3 | tomcat |
----------------------+
select * from roles;
| role_name |
| tomcat |
| role1 |
select * from user_roles;
-----------------------+
| role_name | user_name |
-----------------------+
| tomcat | user1 |
| role1 | user2 |
| tomcat | tomcat |
| role1 | tomcat |
-----------------------+Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 734 ms
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: oracle.jdbc.driver.OracleDriver
at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart -
NW04s JDBC Connection for MSSQL not working
In portal JDBC settings are:
Connection properties
URL = jdbc:microsoft:sqlserver://192.168.0.101:1433;DatabaseName=Northwind
Driver = com.microsoft.jdbc.sqlserver.SqlServerDriver
User Management
User mapping type = admin,user
I assigned a user to Administrator under User Administration
Visual Administrator settings are:
DriverName = com.microsoft.jdbc.sqlserver.SqlServerDriver
URL = jdbc:microsoft:sqlserver://192.168.0.101:1433;DatabaseName=Northwind
UserName = empty
Password = empty
Result
Connection test fails in portal. The settings appear ok.
The only thing I can think of is that user specified in portal user mapping is not setup properly on SQLServer.
Also:
When I run link:
http://localhost:53000/TestJDBC_Web/TestJDBCPage.jsp
my jdbc service MSSQL_JDBC does not appear. MSSQL_JDBC was cloned from SDK_JDBC and the libray for drivers was added
I am running MSSQL 2000 SP4 but using JDBC drivers for SP3 as I didn't find any for SP4 and assumed they would work for SP4
What am I missing?Raynald,
I think I am having a similar problem.
I also cloned the connection names in Vis. Administrator to the SDK_name.
Indeed it now appears in the test servlet, and I can succesfully execute SQL statements from there.
So the connector seems ok.
But I have still problems with the Connection Test in the Portal.
I am trying to make BI JDBC system to be able to use my database from the Visual Composer.
I am using these properties:
CodeLink = com.sap.portal.systems.bi.SAP_BI_JDBC
ConnectionFactoryClass = SDK_TESTDB
ConnectionUrl = jdbc:jtds:sqlserver://sapserver:1433;databaseName=TestDb
(this url is the same as in Vis. Administrator)
Driver Class Name = net.sourceforge.jtds.jdbc.Driver
Fixed Catalog = empty
Fixed Schema = empty
System Type = SAP_BI_JDBC
User Mapping = admin, user
I am logged in as Administrator, so I added the login credentials at the User Mapping page of the Administrator user.
When I use Connection Test function from the portal I get the following messages:
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
What can I do to solve this problem? -
Problems with ipod connection.
Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. -
I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.
-
Problem with JBDC connection to mysql in tomcat
hi ,
can anyone plz help me?..
iam new to JSP. iam trying to impelement a application in JSP with JDBC connection using tomcat. Database is MYSQL .
iam getting the following error:
org.apache.jasper.JasperException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Server connection failure during transaction.
Attempted reconnect 3 times. Giving up.)"
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:375)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.ServletException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Server connection failure during transaction.
Attempted reconnect 3 times. Giving up.)"
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:858)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:791)
org.apache.jsp.test_jsp._jspService(test_jsp.java:81)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
THIS IS MY APPLICATION:
<html>
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:query var="rs" dataSource="jdbc/TestDB">
select id, foo, bar from testdata
</sql:query>
<html>
<head>
<title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:forEach var="row" items="${rs.rows}">
Foo ${row.foo}
Bar ${row.bar}
</c:forEach>
</body>
</html>
Following is the context file called "DBtest.xml" stored in webapps/DBtest/META-INF folder( i have a same copy of the file in /conf/Catelina/localhost)
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="javauser" password="javadude" driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
</Context>
i have following web.xml file in webapps/DBtest/WEB-INF
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<description>MySQL Test App</description>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/TestDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
i have been refering to the internet form past 3 days and making lot of changes.but,there is no use.
plz guide me
thanksPerhaps a stupid question: is MySQL running and listening on port 3306? The problem is not always in the webapp. Perhaps you can create a small test class that uses Driver to make a connection to your database.
-
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8 -
I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?
Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario -
I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!
Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
Problems with Sybase Database for Collection Manager in SCE2020
We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
[root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00 149559596 138280700 3681636 98% / /dev/sda1 101086 20685 75182 22% /boot none 1036624 0 1036624 0% /dev/shm
We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
Here is the info:
Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
[root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
[root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
Name % Data Free % Log Free
Database 55 99
[root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
/home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
/home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
[root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
Test: 01db_up.sh. Status: FAIL. Message: DB is not running
Test: 02cm_up.sh. Status: PASS. Message: CM is running
Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
Message was edited by: EMILIO MENCIATomo:
we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
This is the log of the CM. What can be the problem? Thanks tomo
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts during current sample period: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of User Accounts since startup: 3.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections during current sample period: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Configured Number of User Connections since startup: 200.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections during current sample period: 15.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum Number of User Connections since startup: 18.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used during current sample period: 1.
Nov 3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server Maximum number of user seat licenses used since startup: 3.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server Error: 1608, Severity: 18, State: 4
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel Cannot send, host process disconnected: btllt0012 suid: 3
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server Error: 1608, Severity: 18, State: 4
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel extended error information: hostname: btllt0012 login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Error: 632, Severity: 20, State: 2
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server Attempt to move memory with an incorrect length
of -794444483. Maximum allowed length is 16384.
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel SQL causing error : =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel ************************************
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curdb = 4 tempdb = 2 pstat = 0x10000
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel lasterror = 632 preverror = 0 transtate = 3
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel curcmd = 0 program =
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel end of stack trace, spid 11, kpid 1755578479, suid 3
AFTER RESTART
ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel Adaptive Server Enterprise (Small Business Edition)
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel Using config area from primary master device.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel Locking shared memory into physical memory.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel Internal run-time model set for Linux - Native
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using 1024 file descriptors.
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Copyright 1987, 2007
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. All rights reserved.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Unpublished rights reserved under U.S. copyright laws.
Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel
Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel This software contains confidential and trade secret information of Sybase,
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Inc. Use, duplication or disclosure of the software and documentation by
Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel the U.S. Government is subject to restrictions set forth in a license
Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement between the Government and Sybase, Inc. or other written
Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel agreement specifying the Government's rights to use the software and any
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel applicable FAR provisions, for example, FAR 52.227-19.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel Platform TCP network is forced to IPv4-only.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel ASE booted with TCP_NODELAY enabled.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel SSL Plus v5.0.4 security modules loaded successfully.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel Network and device connection limit is 1009.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Number of blocks left for proc headers: 12760.
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server Proc header memory allocated 2552 pages for each per engine cache
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Size of the 16K memory pool: 307200 Kb
Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server Memory allocated for the default data cache cachelet 1: 307200 Kb
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel Virtual device 0 started using asynchronous i/o.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server Loaded default Unilib conversion handle.
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel Worker Thread Manager is not enabled for use in ASE.
Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel Unix interval timer enabled for sysclk interrupts.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel Begin processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Completed processing to generate RSA keypair.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel Encryption provider initialization succeeded on engine 0.
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel engine 0, os pid 27618 online
Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server No active traceflags
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel libomni1 - Component Integration Services: usin
g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server Opening Master Database ...
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server Loading ASE's default sort order and character set
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server Recovering database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server Started estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed estimating recovery log boundaries for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Completed ANALYSIS pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server Started REDO pass for database 'master'. The total number of log records to process is 13.
Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Completed REDO pass for database 'master'.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Recovery of database 'master' will undo incomplete nested top actions.
Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server Started recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server Completed recovery checkpoint for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server Started filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server Completed filling free space info for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Started cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server Completed cleaning up the default data cache for database 'master'.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server Checking external objects.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server Database 'master' is now online.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server The transaction log in the database 'master' will use I/O size of 16 Kb.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server Warning: ASE_HA has no valid license and therefore is not initialized.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server server name is 'pqbsyb1'
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server Activating disk 'sysprocsdev' of size 126976 KB.
Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel Virtual device 1 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server Activating disk 'systemdbdev' of size 49152 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel Virtual device 2 started using asynchronous i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server Activating disk 'apricot_data1' of size 35082660 KB.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server Activating disk 'apricot_log1' of size 2980002 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server Activating disk 'tempdb_dev' of size 1048576 KB.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel Virtual device 5 started using asynchronous i/o.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server Recovering database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server Started estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Completed ANALYSIS pass for database 'sybsystemdb'.
Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Completed REDO pass for database 'sybsystemdb'.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server Started recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server Completed recovery checkpoint for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server Started filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server Completed filling free space info for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Started cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Completed cleaning up the default data cache for database 'sybsystemdb'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server Boot Count: 13
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server Checking external objects.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server Completed recovery checkpoint for database 'model'.
Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server Started filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server Completed filling free space info for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Started cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server Completed cleaning up the default data cache for database 'model'.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server Checking external objects.
Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server The transaction log in the database 'model' will use I/O size of 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Database 'model' is now online.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server The logical pagesize of the server is 16 Kb.
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server 0 dump conditions detected at boot time
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server Clearing temp db
Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server Database 'tempdb' is now online.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server Recovering database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server Started estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed estimating recovery log boundaries for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed ANALYSIS pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Completed REDO pass for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server Started recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server Completed recovery checkpoint for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server Started filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server Completed filling free space info for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Started cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server Completed cleaning up the default data cache for database 'sybsystemprocs'.
Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server Checking external objects.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server Database 'sybsystemprocs' is now online.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server The server will recover databases serially.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server Recovering database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server Started estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed estimating recovery log boundaries for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Completed ANALYSIS pass for database 'apricot'.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server Started REDO pass for database 'apricot'. The total number of log records to process is 846.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Redo pass of recovery has processed 2 committed and 138 aborted transactions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server Completed REDO pass for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Recovery of database 'apricot' will undo incomplete nested top actions.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server Started recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server Completed recovery checkpoint for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server Started filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server Completed filling free space info for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Started cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server Completed cleaning up the default data cache for database 'apricot'.
Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server Checking external objects.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server The transaction log in the database 'apricot' will use I/O size of 16 Kb.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server Database 'apricot' is now online.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server Recovery complete.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default unicode sort order is 'binary'.
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server ASE's default sort order is:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'bin_iso_1' (ID = 50)
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server on top of default character set:
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server 'iso_1' (ID = 1).
Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel Cannot send, host process disconnected: btl-sce-cm suid: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server Error: 1608, Severity: 18, State: 3
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel extended error information: hostname: btl-sce-cm login: pqb_admin
Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0) -
Problem with database connectivity
Hi guys,
I'm having a problem with database connectivity . I'm using the mySQL database & org.gjt.mm.mysql driver.
I've kept the org folder under the directory where the Database.java program is residing .
My program is as follows:
import java.sql.*;
public class Database
Connection con;
public void connect()
System.out.println("In connect.");
public Connection connectDB(String username,String password,String database)
try
Class.forName("org.gjt.mm.mysql.jdbc.Driver");
String url="jdbc:mysql:"+database;
con=DriverManager.getConnection(url,username,password);
catch(SQLException e)
System.out.println("SQL Exception caught:"+e);
catch(Exception e)
System.out.println("Exception e caught:"+e);
return con;
public static void main(String args[])
try
Connection c;
Database db=new Database();
c=db.connectDB("root","","//192.168.0.2/squid");
System.out.println("Connection created.");
c.close();
catch(Exception e)
System.out.println("Exception caught:"+e);
It gets compiled but gives the following error when run.
Exception e caught:java.lang.ClassNotFoundException: org.gjt.mm.mysql.jdbc.Driver
Connection created.
Exception caught:java.lang.NullPointerException
I don't know why the class is not found.Pl . help me rectify my mistake.Is there any other path to be set?
Thanks.You need to run it with the JDBC driver in the classpath
java -classpath .;[mySqlJdbcDriver.jar] Database
Maybe you are looking for
-
Input Parameter Mapping is not working in Sap HANA
Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more ca
-
Itunes stops working with vista
Has anyone had problems with itunes stopping working with windows vista? I have tried all the upgrades but itunes still stops working when playing songs and videos.
-
Actual Invoice against Down Payment
Hi Expert, I have an issue where business raised an AP invoice with special G/L indicator 'U' as downpayment. Then business cleared the invoice/downpayment via F110. Then business raised an actual invoice, how to knock off the value in the actual inv
-
Wondering questions for Battery Calibrating
Hi, im a new Mac user and i've heard and read about how important it is to calibrate your battery. However, there are a few things that im not sure if that'll affect the process of calibration or if it will not considered as calibrating. I understand
-
Migrating Business Objects v5.1.1 Universes to Discoverer 4i EUL
This can be achieved by using the EUL Gateway facility. So has anyone out there done this and can provide me with the scripts