Problem with keeping session active in WEB

Hi,
We are using only web repoting and when these web reports are excuted and left idle for some time then any further operation on the report output after 10 mins give out a error and doesnt proceed further.
As i understnd this has got something to do with the parameter in RZ10.
To mention a few we have rdisp/max_wprun_time is set as 600.
Is this the value responsible for that. If yes then can we increase this?
Else pelase suggest the exact parameter?
Can i have any SAP recomeneded values documentation.
Thanks,
Naveen.A

1. icm/keep_alive_timeout - set the timeperiod here for max idle time - also check out the documentation of this param from RZ11
2. you can also set the session time out at transaction SICF
default_host/sap/bw/bex
double click on bex, there you can set the session time out (stateful connections)
Regards
Raja

Similar Messages

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Problem with the product activation adobe acrobat 9 standard.

I have a problem with the product activation adobe acrobat 9 standard.
It is a failed hard disk to the pc and was not able to deactivate the license adobe.
Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
Is it possible to unlock the licenses in use?
Thank you.

Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.

A simple problem with sateful Session beans

Hi,
I have a really novice problem with stateful session bean in Java EE 5.
I have written a simple session bean which has a counter inside it and every time a client call this bean it must increment the count value and return it back.
I have also created a simple servlet to call this session bean.
Everything seemed fine I opened a firefox window and tried to load the page, the counter incremented from 1 to 3 for the 3 times that I reloaded the page then I opened an IE window (which I think is actually a new client) but the page counter started from 4 not 1 for the new client and it means that the new client has access to the old client session bean.
Am I missing anything here???
Isn�t it the way that a stateful session bean must react?
This is my stateful session bean source.
package test;
import javax.ejb.Stateful;
@Stateful
public class SecondSessionBean implements SecondSessionRemote
private int cnt;
/** Creates a new instance of SecondSessionBean */
public SecondSessionBean ()
cnt=1;
public int getCnt()
return cnt++;
And this is my simple client site servlet
package rezaServlets;
import java.io.*;
import java.net.*;
import javax.ejb.EJB;
import javax.servlet.*;
import javax.servlet.http.*;
import test.SecondSessionRemote;
public class main extends HttpServlet
@EJB
private SecondSessionRemote secondSessionBean;
protected void processRequest (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType ("text/html;charset=UTF-8");
PrintWriter out = response.getWriter ();
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet main</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Our count is " + Integer.toString (secondSessionBean.getCnt ()) + "</h1>");
out.println("</body>");
out.println("</html>");
out.close ();
protected void doGet (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
processRequest (request, response);
protected void doPost (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
processRequest (request, response);
}

You are injecting a reference to a stateful session bean to an instance variable in the servlet. This bean instance is shared by all servlet request, and that's why you are seeing this odd behavior.
You can use type-leve injection for the stateful bean, and then lookup the bean inside your request-processing method. You may also save this bean ref in HttpSession.
@EJB(name="ejb/foo", beanName="SecondBean", beanInterface="com.foo.foo.SecondBeanRemote")
public MyServlet extends HttpServlet {
ic.lookup("java:comp/env/ejb/foo");
}

A problem with a session Access

Hi Olivier,
To connect with Forte while running distributed you must use System DNS
instead of User DNS on the server. The ftexec.exe on your server partition
will be launched by the NodeMgr running as UID SYSTEM. User DNS are not
available to processes running as UID SYSTEM.
Zenon Adamek
Purolator
-----Original Message-----
From: Olivier Andrieux [SMTP:oandrieuxaxialog.fr]
Sent: Tuesday, July 04, 2000 4:59 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) A problem with a session Access
Hi,
We have defined a service object which calls a database Access, when we
use the driver odbc of another station the service object is created and
the application runs. But when we use the driver of the server we have an
exception and this message :
SYSTEM ERROR: Unable to start the partition AxiGecom_CL0_Part1 on any of
the
nodes to which it has been assigned. See the remainder of the error
stack for
more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method InterfaceManager.PrepareLOM
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Unable to start partition AxiGecom_CL0_Part1 on node
SERVEUR59B.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Attempt to load partition named AxiGecom_CL0_Part1 failed.
Class: qqsp_ResourceException
Error #: [1001, 4]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Jul 04 10:49:15
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_cl0_Client",
(partitionId =
EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9.4]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
SYSTEM ERROR: Failed to create service object
Axigecom_Serveur.Connection_BD.
Class: qqsp_ResourceException
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
USER ERROR: (This error was converted)
Failed to connect to database: Axigecom, username: Administrateur.
[Microsoft][Gestionnaire de pilotes ODBC] Source de données non
trouvée et
nom
de pilote non spécifié
Class: qqdb_RemoteAccessException with ReasonCode:
DB_ER_DBMSCONNECTION
DBMS SQLSTATE: IM002
Class: qqsp_ErrorDescriptor
Detected at: qqdb_OdbcVendorInfo::DoSQLConnect at 10
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
for information, we use a server NT and the stations use Nt, the drivers
DNS users are declared.
We use Access2000, and the version M for Forté
Thanks in advance,
Olivier Andrieux
AXIALOG
France

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

Problem with prompt for default in WEBI!

Hello friends
I am new to BO and Webi And I have a problem with a report. It happens that I have created a query in SAP (with Query Designer) and I created the Universe (with Universe Designer). The query gets a cost center to filter the data, but when I run the report in InfoView I asked the cost center, it comes with a default. Is it a property that can be turned off in Webi or elsewhere?
I would be grateful if I can help.
Regards

Is in the BEx query any default value selected for the cost centre?
Could you please mention here the where clause of the filter object for Cost Center in the universe ?

Hello, I have a big problem with Firefox: Session Manager & Undo Closed Tab addons are not working, Sync Is not working. History is working. How to fix this?

Firefox remembers history but doesn't remember closed tabs, sessions.
It happened after updating Fox to v. 19.0.2 on one computer.
In Firefox Options is set Use Custom Settings For History, everything is checked except Always Use Private Browsing Mode. So I am not in private browsing.
When I press on Undo Closed Button nothing happens & in session manager Save Session Button is greyed out. I've tried installing other add-ons that can remember tabs. tried to disable/reinstall these 2 add-ons. Did't help. On my 2nd computer I have same add-ons, same settings and they are working normally. on 3rd computer undo closed tabs works also. How to fix this? I decided to ask before doing Firefox Reset...
Sync is a separate problem. It works, but quite often it logs me out of Sync account. Then I can log in only using long recovery key and password (choosing option I don't have device with me because it does not accept keys for pairing device.)
Thanks for reading.

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

Problems with a session of batch input - In processing

Hello!
I have a problem with a depreciation posting Session (AFAB). User has stoped the process of session and now the status is 'In Processing' and we can't run it anymore...
¿How I can process this Session?
I've tried to delete the session and re-run the depreciation posting, but it's not working.
I've tried to delete in TABA table the line of this period, but it's not working.
I've tried to suicide me, but... it's not working.
I'll try to kill the user, I hope that It will work.
Can you help me? Please.
Thanks a lot!!!

Dear Jorge,
In SM35 analyze your session.
If it was processed in background go to transaction SM37. Else, you can proceed in SM35 itself.
Regards,
Naveen.

Problem with file receiving through abap web service

Hi experts,
I need to created web service for import file from .NET application into SAP.
ABAP function expect hexadecimal string (same as GUI_UPLOAD / GUI_DOWNLOAD) but hexadecimal string from C# is too long (double longer), and I have no idea how to convert it. Also there is a problem with code page...
Is there some better way to do this? Any idea is welcome!

Hi Nemanja,
Please bear in mind that your SAP system is based on UTF-8 encoding. Since you have the xstring length doubled, most probably your sender system uses UTF-16 encoding. So what you need to do is change the encoding used by your .NET application when sending the data to SAP.
Alternatively, you can try using XSL Transformations in ABAP to have the input data converted from UTF-16-encoded xstring to ABAP structures. You can find a little example in this thread: ABAP data to XML conv with UTF-8 encoding and custom namespace. The point is to start your XSLT with the following: <?xml version="1.0" encoding="utf-16"?>.
Hope this helps,
Greg

Problems with Java cyrillic fonts in Web enabled Forms

I have a big problem with the deployed forms on the web. The
problem is that when a form is run on the web in a Java Applet it
uses some strange fonts. I want to make it use only specified
fonts but I don't know how. Please help me.
I am using Developer /2000 v2.1 and Forms5.0. The DB characterset
is CL8MSWIN1251. The OWS is v3.0.1. All these are running on NT.
null

Hi
QueryXInModel model = new QueryXInModel();
wdContext.nodeRequest_FindXByElements().bind(wdContext.createRequest_FindXByElementsElement(new Request_FindXByElements(model)));
wdContext.currentRequest_FindXByElementsElement().modelObject().setXByElementsQuery(new XByElementsQuery_Sync(model));
//Processing structure
wdContext.currentXByElementsQueryElement().modelObject().setProcessingConditions(new WITHOUT_LASTRETURNED_QueryProcessingConditions(model));
//Selection structure
wdContext.currentXByElementsQueryElement().modelObject().setXSelectionByElements(new XSelectionByElements(model));
XByElementsQuery
ProcessingConditions
QueryHitsMaximumNumberValue
QueryHitsUnlimitedIndicator
XSelectionByElements
ID
Year
as
          QueryXInModel model = new QueryXInModel();
           Request_FindXByElement request = new Requst_FindXByElement();
            ProcessCondition   processCond = new ProcessCondition(model);
            QueryHitsMaximumNumberValue qhMaxNumValues = QueryHitsMaximumNumberValue(model);
      QueryHitsUnlimitedIndicator qhUnLimind = new QueryHitsUnlimitedIndicator(model);
        XSelectionByElements selecByEle = new XSelectionByElements(model);
                 processCond.set....();
                 qhMaxNumValues .set...();
           and so on
                request.set....();
wdcontext.nodeReqestFindX..bind(request);
in the above during the values you will automatically get the set values .

Problem with the Installation of Mobile Web Server...

I have a N95. I have been trying to install Mobile Web Server on it. The installation fisnishes but the icons are all separeted and there is no only one icon for the program (MWS, MWSChat, MWSBlog, MWS).
Reading the manual of the software I realized that something should run after the installation but nothing is
executed. I tried to install it on memory card, main memory
>with no success. Is there any bug reported about it?

Hello, this is a known problem with new 1.2 release. Please refer to my blog post and stay tuned for a fix.
http://blogs.s60.com/mws/2008/01/mobile_web_server_new_release.html

Problem with Using Spring IoC and Web Start

Greetings Everyone,
I have a small Swing app that runs using spring to load its dependencies. I can run it from a single signed jar file locally, and I setup my .jnlp file to try it with Web Start.
Unfortunately, I get the following:
java.security.AccessControlException: access denied (java.lang.RuntimePermission accessDeclaredMembers)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
     at java.security.AccessController.checkPermission(AccessController.java:546)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     at java.lang.SecurityManager.checkMemberAccess(SecurityManager.java:1662)
     at java.lang.Class.checkMemberAccess(Class.java:2157)
     at java.lang.Class.getDeclaredMethods(Class.java:1790)
     at org.springframework.util.ReflectionUtils.doWithMethods(ReflectionUtils.java:429)
     at org.springframework.util.ReflectionUtils.doWithMethods(ReflectionUtils.java:412)
     at org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor.findPersistenceMetadata(PersistenceAnnotationBeanPostProcessor.java:363)
     at org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor.postProcessMergedBeanDefinition(PersistenceAnnotationBeanPostProcessor.java:296)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyMergedBeanDefinitionPostProcessors(AbstractAutowireCapableBeanFactory.java:745)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:448)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:221)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at org.springframework.context.support.AbstractApplicationContext.getBean(AbstractApplicationContext.java:881)
     at org.springframework.context.support.AbstractApplicationContext.registerBeanPostProcessors(AbstractApplicationContext.java:597)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:366)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:139)
     at org.springframework.context.support.ClassPathXmlApplicationContext.<init>(ClassPathXmlApplicationContext.java:83)
     at org.chibgrant.main.MainPOE.main(MainPOE.java:31)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.javaws.Launcher.executeApplication(Launcher.java:1321)
     at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1267)
     at com.sun.javaws.Launcher.doLaunchApp(Launcher.java:1066)
     at com.sun.javaws.Launcher.run(Launcher.java:116)
     at java.lang.Thread.run(Thread.java:619)
I am running build 1.6.0_13-b03. Anyone run into this before?
Thanks for any insights...!

I suspect you may have solved this yourself by now, but in case not.
I've recently created a desktop application that uses Spring and is launched via Java Web Start and I did have a problem getting it to launch via Web Start until I modified my code to ensure the classloader setup is done before any Spring methods are called.
i.e.
    // This is needed for Java Web Start compatibility.
    UIManager.getLookAndFeelDefaults().put("ClassLoader", Loader.class.getClassLoader());In may application this code is invoked in the class that starts my application (Loader) before I load anything via Spring.
Cheers,
Stephen.

Problem with Reoprt 9i on the web

I have a couple of problems with a 9i report running on the web.
This report uses the following system parameters: DESTYPE, DESNAME & DESFORMAT in the parameter form.
When DESTYPE = 'Cache', no value in DESNAME, DESFORMAT = 'PDF', the PDF output is perfect.
When DESTYPE = 'File', DESNAME = 'MyFile', DESFORMAT = 'PDF', it writes to the file perfectly and comes back with a Oracle Reports Job Status - Successfully run.
Scenario 1
However, if the DESNAME has a value, e.g. MyFile, it will output into the named file even though the DESTYPE = 'Cache'. Why?
Additionally, I will also get an Acrobat Reader message -'File does not begin with '%PDF'. What is causing this?
Scenario 2
In addition to the above, I have a user parameter which has a LOV of 'Cache', 'File'. The DESTYPE is suppressed from the parameter form. Instead the DESTYPE value is set by the After Parameter Form trigger with the LOV value.
The report runs but it does not come back with a Oracle Reports Job Status - Successfully run message. Why has this message disappeared?
Also the Acrobat Reader message - 'File does not begin with '%PDF' still appears.
Any help will be appreciated!!!
Thanks.
John

Hello John M Ng,
The problem you are facing is because of a known issue in Reports 9i, due to which DESTYPE=CACHE used to fail when a DESNAME was specified along with it. This bug has been fixed in Reports 9i Patch 2 (9.0.2.2). Please install this patch in order to get the fix.
Thanks,
The Oracle Reports Team.

Problems with OSX ja Active Directory (urgent!)

Hello, I'm newbie Mac user and I have a problem with integrating OSX to our company MS Active Directory. This MacBook Pro is a only Apple here, so this is quite difficult...
So far I have made following things:
- I made "Bind" succesfull (it pings from others computers and I can see it from AD tools)
- to AD account I changed my profile to include home folder (\\Adserver\user.account$). When I log on to AD via PC, home folders etc. are done with Logon script (Logon.bat) and I can see those shared folder fine.
- then I rebooted my Mac and on logon screen there is option Other --> there I input my AD username and password. After that OSX log in normally.
- But on Dock there is no Home folder, there is only a big question mark (?) and it says "User X X network home folder" (or something like that). And there is nothing behind this ?-mark
- I have checked from Gerberos that I have a valid ticket to AD-server
I have also tried to map network folder (apple + K), but there will error message that "Server couldn't reach, because user name or password is wrong"
I have spend a couple of days to solve this problem, but nothing seems to solve it. Could someone please help me? I really need those shared folders (yes, there are at leat two I need from AD), because on those folder are documents that I need daily at my work.
thanks,
-zooropa
MacBook Pro Mac OS X (10.4.5)

My admin username of Mac is "firstnamesurname" and AD account is "firtsname.surname". So the "dot" is only difference. Is that enough?
I made binding with Mac admin account and after that I used "other" on login screen of OSX. As I wrote, I can login fine with AD username and password, but the problem is that I can't map home folders from Windows Server 2003.

Problem with keeping session active in WEB

Similar Messages

Maybe you are looking for