Problem with Locating controls in UI Control Map

Hi everyone,
I am having a very weird problem and have no idea what's going on. I am working on creating some Coded UI tests and I have noticed that, on my machine, when I go to a .uitest file, right click on one of the controls in the UI Control Map list, and select
Locate the UI Control, the blue box always shows up about 2 inches up and 4 inches to the left of the specified control. Also, when I try to generate a new map by dragging the target tool to the app, it doesn't find the control correctly, but also appears
to think the app is open in a different location than it actually is. The weirdest thing though, is that this functionality seems to work fine with web pages. It's only when I try to use it on a windows app that it has a problem. Any ideas?
Thanks in advance,
Aaron Sellers

Hi Aaron Sellers,
According to your description, could you please tell me detailed steps how you generate a new map
in the coded UI test?
Generally, when we want to add new UI control in the UI Control Map list, we can right-click the
CodedUITest method->Generate Code for Coded UI Test->Using Coded UI test builder like the following screen shot.
Or we can also right-click the UIMap.uitest->Edit With Coded UI Test Builder like the following
screen shot.
So I suggest you can try the above suggestion to check your issue again.
In addition, as you said that the weirdest thing though, is that this functionality seems to work
fine with web pages. It's only when I try to use it on a windows app that it has a problem. Any ideas?
I have been reproduced this issue in my side, I found that we can use the Locate the UI Control function
to find the control for a windows app.
So to further help you solve this issue, I suggest you can told me more detailed message about your
issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Compatibility problem with macro media flash active control

I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trisha

the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Problem with Vertical scroll in table control

Dear All,
I am facing a problem with table control in module pool program. currently it displays 6 lines, but it does not display the vertical scroll button, even though when I fill data in the six rows and hit enter.
I have set the vertical scroll option on the table control properties also.
Can someone help me by sending some sample code?
Thanks,
Amit Goyal

HI Amit ,
If you have already selected the properties of vertical and horizontal scroll bar then no other operations needed .. if the number of rows increases then that of the table control , you will automatically see the Vertical scroll in your table control ..
if still you dont see it then write back ..
Reward if helpful !
Thanks
Ranjita

Problem with my macbook air brightness control key

i have a problem with my macbook air.my brightness control key ( F1 & F2 ) dont work.what can i do ?

If keys on your keyboard don't work:
http://support.apple.com/en-us/HT203162

Problem with childs nodes and automatic key mapping in a Data Object

Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.

The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Problems with location based applications

I am having problems with all of my location based applications i.e. none of them work. It seems I can never be located by the GPS no matter where i am and i just get a permanently spinning wheel. I have deleted and reloaded the Apps (although even with the generic Maps App i cannot be located) and i have reset the phone Reset iPhone (but havent Reset Settings or Restored yet). I love my iPhone but this is very frustrating. Can someone please help ?

Didn't work unfortunately. My Location Services were On so i proceeded to Restore. All went ok on the Restore but i still have the same problem. I have 4 App's that are location based and none of them work. Your suggestion ? Thanks for your help.

Having Problems with Location finder

Since 4.0 update my location finder does not work on home network. Tried it on a public network and it works. Anybody else had this problem and did you find a solution.

Many people (myself included) noticed that Location Services stopped working with the upgrade to iOS 4.0. The symptom is that Maps and other apps say "Your location could not be determined." even in areas that used to work. The problem is that starting in iOS 3.2 and iOS 4.0, Apple switched from using the SkyHook location database to using their own. Whereas the SkyHook database had the ability for users to add their own WiFi access points, Apple does not have anyway for us to do that.
I just spent over an hour on the phone with Apple Support senior advisors, who initially wanted to restore my unit or even replace it (neither of which would have fixed it), until I found the news reports about Apples new location database. Eventually, I found a senior advisor who was able to track down the problem and admitted that, yes, since the switch from SkyHook to Apple's own database, many WiFi access points no longer work with location services. "Apple is working on the problem, and eventually it will be fixed, although there isn't any time estimate." I asked specifically if this meant that Apple was going to allow users to add their own WiFi access points, and she said "Yes."

Problem with condition IF THEN in Message MApping

Hi,
We are not getting correct ouput when we use condition IF THEN without else in message Mapping .We are sending data from File to XI to R/3.
We are using file adapter and IDOC adapter to create customer in R/3.
In message Mapping we are creating Segment E1KNB1M and E1KNBKM based on condition.
IF THEN Condition used in mapping is as below
find the length of Compnaycode with LENGTH function.Pass that value as one of the parameter to function GREATER.Pass second parameter to function GREATER a constant (0).Pass the result to If without else function.If this is true pass Item to IF THEN function and Map the result to E1KNB1M.
Our mapping is not giving desired output in below scenario:
Source XML
<?xml version="1.0" encoding="utf-8" ?>
<ns:CustomerMaster_Request_MT xmlns:ns="http://mazdausa.com/sapr3/fi/masterdata/customermaster">
<Idoc>
<Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>R51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
<Item>
<ID>L</ID>
<COMPCODE>US10</COMPCODE>
<BANKKEY>0000326</BANKKEY>
<BANKCNTRY>US</BANKCNTRY>
<BANKACCT>05893</BANKACCT>
</Item>
</Idoc>
- <Idoc>
- <Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
</Idoc>
- <Idoc>
- <Header>
<ID>H</ID>
<ACCTGRP>M002</ACCTGRP>
<CUSTNO>V51563</CUSTNO>
<NAME1>WAYNE MAZDA</NAME1>
</Header>
- <Item>
<ID>L</ID>
<COMPCODE>US10</COMPCODE>
<BANKKEY>000326</BANKKEY>
<BANKCNTRY>US</BANKCNTRY>
<BANKACCT>0305893</BANKACCT>
</Item>
</Idoc>
</ns:CustomerMaster_Request_MT>
Here 3 Idoc are created under ZDEBMAS06.
First IDOC contain segment E1KNB1M and E1KNBKM as desired because first idoc in Source XML contains Item data.
Second IDOC contain segment E1KNA1M only as desired because second Idoc in Source XML does not contains item data.
Third IDOC does not contain Segment E1KNBKM and E1KNB1M which is not a desired output. It should contain these segments as third idoc in source XML have item data.
But we are getting right output in case we also have Item data under second IDOC in source XML.
Please let me know where I am doing wrong.
Thanks.
Rekha.

Hi Rekha,
I am getting the same problem while checking display Queue in message mapping??
<i><b>Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"</b></i>
Any ideas to solve this problem...
Thanks,
Sekhar

Problem with location.href

hi
I want to create a widget but got a problem with a link. This is the html code.
<body>
<input type="text" id="temporaryinbox_textbox">
<select id="language">
<option value="">en</option>
<option value="de/">de</option>
<option value="es/">es</option>
<option value="it/">it</option>
</select>
<input type="submit" value="Check" onclick="location.href = 'http://www.temporaryinbox.com/' + document.getElementById('language').value + 'inbox.php?inbox=' + document.getElementById('temporaryinbox_textbox').value;">
<input type="submit" value="Random email" onclick="createRandomEmail();">
<input type="text" id="temporaryinbox_textbox2" size="25" onclick="document.getElementById('temporaryinbox_textbox2').select();">
</body>
On Windows with Firefox it works but on OS X as a widget it loads the target in to the widget. How can I make load it into a new Safari window? Or set it, that the default browser will be used….
Thanks for your help
iMac Intel 17" Mac OS X (10.4.6)

Hi Samira,
DI has by nature some constraints, one is its memory leaks another one is the time of instanciation... I can keep going with some others like memeory consumption and not thread safe.
Servers technologhies are, starting by the historical one DI-Server and its companion which is B1WS and finishing by one which is the way to go: B1if (you can call scenario as web services).
What I meant by implementing a connection's cache mechanism, is to limit the number of connections and deconnections (the main issue with DI-API), but definitively I would try to go outside of this... But this is my personal point.
Regards,
Eric

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Problem with locating videos

Okay, so I have had problems with my hard-drive in recent months so I backed up my videos I bought from the Music Store and I copied them (which actually erased them from my CD, so it was more like it 'Cut' them) back to iTunes when I had it up and running again. I had to update/restore my iPod and now when I try to put my videos back onto my iPod it says they cannot be located. BUT, the videos are listed under the 'Videos' section of my iTunes. How can I put them back onto my iPod? Where are they? I cannot find the files anywhere aside form their listings in 'Videos'

All of their "Wheres" say "Not available"...I am just confused of how they would be listed in my main library and Videos section but cannot be located. And the problem I have, I am assuming its a safeguard for iTunes, is that when I copied the files from their backed-up location on a CD, they were permanately removed. Any ideas? haha

Problems with location

I try to locate my Ipad on the programs on the Ipad, as well as via MobleMe "Find My Ipad", and it saws that the device can not be located. I was wondering since we are having rain and overcast, if that could be causing the problem, or if there is a problem with my Ipad itself. Everything else is working fine on it. It connects to the internet and everything.

like king said - if it is a wifi only, it has no gps chip, and relys on a table of router information that may or may not have your info in there. You might try a starbucks or other hotspot and try it there. note - from my experience, if you are relying on the router info, it will take a while, and may not be particularly accurate. Also, duh, it will only work if you are actually on the internet on wifi while it is looking.

Problems with derivative/integral in PD control for real time.

Hello to you all,
I'm using Labview 8.5 to build a PD controller.
i'm using a PXI 8187 with FPGA 7831-R.
I run a simulation of the controller both in matlab and laview using the simulation module and it worked fine.
the next step is to build the PD controller in a new VI and use it control the signals from the FPGA,but when i try to use others form of derivatives,including the mathematic's backward derivative, but the system is not stable any more.
does anyone know what can i use to replace the derivative block that will work the same?

hello again,
i've posted the VI's in here:
http://hl2.bgu.ac.il/users/www/18850/labview/
the system should be settling around the set point 0:
the file:1st working pd is the same as in the picture: the system is stable, but i cant use a simulation to when using a RT controller.
the file 1st not working Pd is the same as the working one,but instead of using the simulation continous derivative and integral i used other whioch doesnt seem to work.
the file PD2 represent how the PD controller should look standalone- location X as input and current I as output.
the file 2nd not working vi uses the PD2.vi to simulate the system unsuccesfully.
you can change the running time of each vi to see how the 1st working one is stable around 0 and how the other ones are not.
I hope that would help you guys to figure out what is wrong and let me continue my gradguation project.
thanks again.
elad.

Problem with Locating controls in UI Control Map

Similar Messages

Maybe you are looking for