Problem with LTKRN11N.dll after enabling "View PDF in Browser" option

Good afternoon,
I'm trying to install an internal business application on one of our office PC's but keep getting errors during the install. The two errors I receive are:
The ordinal 267 could not be located in the dynamic link library LTKRN11n.dll
The ordinal 173 could not be located in the dynamic link library LTDIS11n.dll
I've narrowed the problem down and can repeat it...it seems to be the result of enabling the option "View PDF in Browser" in the preferences of Adobe Reader 9.3. Simply unchecking the option does not fix the problem and neither does uninstalling Adobe or the other application. So far, the only answer has been to re-image the machine without the option, install the other application and then enable the option (if needed) however, once the option has been enabled, any further attempts to install the application, will fail, reuquiring a re-image.
Any help with how Adobe uses these dlls or what might remedy the problem would be greatly appreciated.
Thanks,
Matt

It looks like the 2 DLLs you mentioned, are getting corrupted or modified due to some operation that might have been performed on them. Can you please try the below mentioned instructions and see if that gets your application to install without any errors:
1. Try installing your business app.
2. When you see the error message as stated, try running the below mentioned commands: (Start | Run | Type cmd and hit Enter)
    regsvr32 LTKRN11n.dll /i /s
    regsvr32 LTKRN11n.dll /s
    regsvr32 LTDIS11n.dll /i /s
    regsvr32 LTDIS11n.dll /s
3. The above commands should fix the issues in the mentioned DLLs and allow normal installation of your business app.
Hope this gets your app to work and install properly.

Similar Messages

Problems with links/email addresses when viewing PDF in browser ONLY

Hi,
I have just sent a pdf document with an email address in. There appears to be a strange issue: if that pdf file is downloaded and viewed in Adobe Reader the mailto links behind the text email addresses work as normal ([email protected]). However, when that pdf is viewed directly in the browser (Chrome on Windows 7) using the built in pdf viewer all the double letters in the mailto are removed (eg. [email protected]), however the text itself is unchanged.
There are two examples of this in two situations, both double letters.
I've just tried a test with '[email protected]' as the test address. Again, the mailto link shows as "mailto: [email protected]". Removing the first double letter, but keeping the second!
Any suggestions?
Thanks,
Matthew

Sorry, you will have to complain to Google about this; Adobe has nothing to do with the Chrome PDF viewer.
Or configure Chrome to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Enabling/Disabling PDF in Browser Option (Acrobat XI)

Firstly, know that yes I understand that this setting is no longer found in and handled by Acrobat XI and that to enable or disable PDF in browser setting you enable/disable the add-on in IE (or other browser).
In the hopes of making it more straightforward and convenient for users to toggle this setting, one option is being explored to create a custom Javascript action in Acrobat to write to the user registry to turn this on/off.
Is this feasible? Can Acrobat JavaScript actions read and write to the user's registry? As we have a collection of users that need to regularly toggle this setting (for reasons I won't go into here), it would be ideal to have an easy and straightforward means to change this setting. One possibility might be a custom Acrobat JavaScript action.
Thoughts, suggestions, ideas?
Thank you

Thank you. Forgive me but I want to make absolutely certain...in no way can a custom Acrobat JavaScript action change the user's registry. Is this correct? A pointer to official documentation stating such would be excellent. I have to convince someone not easily convinced

Failed to display CR after export to PDF in Browser

Post Author: asnila
CA Forum: Exporting
Hi,
I had a problem to display CR after export to PDF in browser. No message error displayed except the browser is blank.
Below is the code that i had been used.
Dim RptFilePath As StringDim RptExportOpt As CrystalDecisions.Shared.ExportOptionsDim ExportLocation As New CrystalDecisions.Shared.DiskFileDestinationOptionsDim ExportPath As StringRptFilePath = "C:\Project\reportPro.rpt"myReport.Refresh()myReport.SetDatabaseLogon("root", "", "localhost", "dbpro")ExportPath = "C:\Project\reportPro.pdf"ExportLocation.DiskFileName = ExportPathRptExportOpt = myReport.ExportOptionsWith RptExportOpt.DestinationOptions = ExportLocation.ExportDestinationType = ExportDestinationType.DiskFile.ExportFormatType = ExportFormatType.PortableDocFormatEnd WithmyReport.Export()Response.ClearContent()Response.ClearHeaders()Response.ContentType = "application/pdf"Response.WriteFile(ExportPath)Response.Flush()Response.Close()MyConnection.Close()
Fyi, i'm using Crystal Report 10 embedded with VS 2005. Please help me.

It looks like the 2 DLLs you mentioned, are getting corrupted or modified due to some operation that might have been performed on them. Can you please try the below mentioned instructions and see if that gets your application to install without any errors:
1. Try installing your business app.
2. When you see the error message as stated, try running the below mentioned commands: (Start | Run | Type cmd and hit Enter)
    regsvr32 LTKRN11n.dll /i /s
    regsvr32 LTKRN11n.dll /s
    regsvr32 LTDIS11n.dll /i /s
    regsvr32 LTDIS11n.dll /s
3. The above commands should fix the issues in the mentioned DLLs and allow normal installation of your business app.
Hope this gets your app to work and install properly.

Problems with notes and mark ups in pdf

I'm having problems with the Adobe reader for iPad.
Whenever I modify a pdf file, adding notes or any other mark up, I'm not able to see any of the markups in the file when I open the same file with another application or I send it via e-mail.
Only the digital signature is still visible.
Thanks

You are correct. When i open it with Adobe i get my mark ups etc. When i use Apple`s pdf view i do not.
Problem solved.
Date: Mon, 17 Dec 2012 10:46:22 -0700
From: [email protected]
To: [email protected]
Subject: Problems with notes and mark ups in pdf
Re: Problems with notes and mark ups in pdf created by Pat Wibbeler in Adobe Reader for iOS - View the full discussion
Can you share what applications you are using to view the notes after emailing? You have to view the document in a Reader that supports annotations. Apple ships a built in pdf viewer (like the one used in iBooks) that many iOS developers use (e.g. Dropbox, email). This built in PDF viewer does not support rendering annotations. However, many other applications (like the Adobe Reader for iOS and the Adobe desktop products) do support Annotation rendering. Similarly, one of our competitor's PDF viewers (PDFExpert) supports this functionality as well. Annotations are part of the PDF standard and the specification is widely available and we would love to see more renderers support it!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4927598#4927598
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4927598#4927598
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4927598#4927598. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader for iOS by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with replication based on materialized view

Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?

34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer"

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problem with Checkbox that disables/enables other components.

Hi
As I show in the title, I have problems with a checkbox that enables/disables another components (three exactly).
I have done the follow:
1.- Set property "AutoSubmit" true in the SelectOneChoice
2.- Set "Disabled" property true or false depending if the SelectOneChoice is selected or not
(#...selectBooleanCheckbox.value?false:true})
3.- Set the Partial triggers to the SelectOneChoice in the three components.
CASE 1: The SelectOneChoice is unmarked. The three components appears disabled and when I mark the SelectOneChoice, this components appears enabled. The thing works ;)
CASE 2: The SelectOneChoice is marked. The three components appears enabled and when I unmark the SelectOneChoice, the components continue enabled. They don't disable until I press the submit button.
how can i make that the components appears disabled when i unmark the checkbox?
i try with de ChangeValueListener, but it only works where the SelectOneChoice changes from unmarked to marked.
thanks!

I think the problem is, when the value is null the checkbox return with the selected state, b'coz u r
returning the checkbox (as it is). so pl'z try with below code (ADDED).
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus,
int row, int column){
if(value != null){
Boolean booleanValue = (Boolean)value;
setSelected(booleanValue.booleanValue());
else /// ADDED
setSelected(false);/// ADDED
return this;
Nediaph.

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

Peggy
You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
Two more questions:
1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
Daveben

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Problem with LTKRN11N.dll after enabling "View PDF in Browser" option

Similar Messages

Maybe you are looking for