Problem with .Mac Synchronisation

Hi
.Mac connections only work sometimes on my machine. When they fail, I get this message in the console log:
2006-03-09 12:03:49.848 dotmacfx[11508] Operation 'downloading "/Library/Keychains/.syncinfo/login.keychain.syncinfo.plist"' got HTTP status code 404
Anyone got any idea what might be the cause?
Thanks for any help.

You'll are likely to get more complete and frequent responses to questions like this if you pose them here, in the .Mac Sync discussions area:
http://discussions.apple.com/forum.jspa?forumID=957
An error code 404 is an html error code indicating that a page cannot be found which matches the URL information submitted. This almost surely indicates an error on the .Mac server side, and therefore can only be corrected by .Mac support. [After all, you cannot craft the URL data submitted during a synchronization event - that it all handled for you by .Mac Sync.]

Similar Messages

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Email Problem with Mac

Hi, I am new to FIOS so I hope this is the proper board to post in. I set up 2 subaccounts for verizon.net email and configured them for my Mac Mail program. Everything worked well for about 2 days, and all of a sudden the Mail program keeps asking for my password (even though it was saved in my Mail settings) and says the the incoming mail server is offline. I've Googled this issue and see that others have posted about the same authentication error. Has anyone else here experienced - and solved - this problem? Thanks.

I am having the same problems with Mac eMail. I have two Macs, one that is running Lion and the other is running Snow Leopard. I have spent days on the phone with Apple and Verizon and they are blaming each other and neither have a solution. Have you been able to get a response? It looks like this is something that happens from time to time but never really gets fixed.
Please let me know if there has been a fix since the Mac Mail update in July? With the Union Issues Verizon doesn't have enough people to address the issues both in person ( I had a tech come to the house and he didn't know anything about software ) or on the phone. They keep kicking it back to Apple. I also have a couple iPhones and both are working fine. So this seems to be OS X specific. I've had Macs and iPhones for 3 years or more.
Just makes me think something was done to the mail servers they didn't get correct.

Problem with Mac Office Password Protection

I'm running Mac OS X 10.7.5 with MS Word for Mac 12.3.5 and MS Excel for Mac 12.3.5.
I created a Word (.docx) and an Excel (.xlsx) document on my Mac at home, both with password protection. I uploaded the documents onto Google Drive. I was able to open the documents a few times with the password on my Mac at home, and on my PC at work. However, now upon opening the docs, Word and Excel say the password is incorrect (both home MAC and work PC).
I know I'm entering the correct password. I'm 100% positive. I was able to open the docs a few times previously just a day before. Now they're completely inaccessible. My questions are:
(1) Is this a common problem with Mac for Word/Excel docs?
(2) Are there ways to recover the password (a dictionary based brute force solution is unlikely to work, as I use non-word passwords with numbers)?
(3) If this is a common problem, are there other alternatives to password protecting or encrypting Mac for Word and Excel docs that don't cause problems?
Any feedback is greatly appreciated. Thanks.

Could just be thats the way it runs on Rosetta. I called in apple to ask if I could return office '04 because I didn't want to take the chance, they were more than eager to return it for me because of the fact it would be slow/maybe have problems running in Rosetta.
I just got iWorks instead till the universal version of office comes out (which if you buy office '04 you'll have to buy the new universal version as well, or so the rep told me).

Problems with "Mac Help"

My help files, especially "Mac Help", no longer work properly since upgrading to Tiger. If I open "Mac Help", for example, the help window will pop up, but the links will not work (nothing happens when I click on them) and the search feature in help will not work either (the little gray "clock" just spins next to the help bar and nothing else ever happens). Any suggestions on this one? As I'm a relatively recent Mac convert, the help feature was something that I came to rely on. Thanks!

Hi CP,
This is a common problem with Mac Help. When it happens, try first (quit Help) deleting this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those files:
Home/Library/Preferences/com.apple.helpviewer.plist
Home/Library/Preferences/com.apple.help.plist
(and this one if you find it):
Home/Library/Preferences/com.apple.helpui.plist
See also this KB article for more info
- Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits
and this excellent X Lab FAQ
- Troubleshooting Help Viewer
It seems (not sure about that), that Help caches get easily corrupted when interrupting searches instead of patiently waiting for its internet accessings etc?
Good luck!
Axl

Thawte Personal Email Cert - Problem with Mac Mail

Hi, I have requested a free cert from Thawte and there seems to be a problem with Mac Mail (using 2.0.7).
I am using Entourage to send a signed message from [email protected] to [email protected]
If I check mail for [email protected]
Mac Mail reports "There was a problem reading the digital signature for this message"
If I check the same account with Thunderbird, everything works fine.
Anyone else having or had problems?
-chris

Hi,
Thanks for the responses. I requested another cert and that did not help. Here is the process I used after requesting another cert.
1. Logged into www.thawte.com and requested a new cert.
2. Using Firefox, retrieved the cert.
3. In Firefox, backed up the cert to a pkcs12 file.
4. Opened Keychain and deleted the first cert.
5. Imported the pkcs12 backup file. Imported fine.
6. Open Entourage, under tools, accounts, exchange profile, security, selected the cert Thawte Freemail Member.
7. Checked all 3 options (sign, include cert, clear test signed.
8. Created a test message from Entourage to .mac account address.
9. Checked mail with Mac Mail and signature fails.
10. Check with 1.02 Thunderbird and it comes back with valid digital signature.
Next, I sent a test email to my Exchange account from Entourage and that message verifies fine. It just seems to not work when I check my email with Mac Mail.
Thanks!
-chris

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

Linksys Connect CD/Downloadable Software compatibility problem with Mac OSX 10.4.11

I purchased a Linksys E1200 and I am running Mac OSX 10.4.11. As I have a G4 eMac, I cannot run a higher operating software. The CD that came with the E1200 will not launch the Linksys Connect software, as it is not compatible with Mac OSX 10.4.11. When I download Linksys Connect software from the support section of the Linksys site (version 1 or 2), same problem. I have read that I can use the E1200 with Mac OSX 10.4.11, but how? Getting very frustrated and would appreciate any practical advice/help. Thanks!
Solved!
Go to Solution.

Hi bassist71,
You may actually do the setup manually. It's done by accessing the setup page of the route through 192.168.1.1 and configuring the settings according to your Internet connection type. If you have a Cable connection, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... If you have a DSL connection, check this out, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Problems with mac book pro (os x 10.5.8)

g'day
recently i have, for me serious, problems with my mac book pro (os x 10.5.8).
discovered that it runs slower and somewhat unstable, i attempted housekeeping and burned large files on cd. furthermore i deleted some files i do not use to trash from 'application'
now once i turn on straight i get a garbled screen with tool bar on top.
if i start with installation disk 1, i get to the complete start-up and is operational.
upon opening the 'dock' to open safari for example - comuter freezes for a few minutes with spinning rainbow wheel.
what might be the problem?
did run
- safe start-up - no change
- disk utility - all ok
- hardware test - all ok
- extended hadrware test - did not work
- activity monitor - cpu - user 16%, sstem 4%, indle 87%
- system memory (2 gb) - free 850 mb, wired 172 mb, active 970 mb, inactive 51 mb
- disk usage (185 gb) - 135 gb used - 50 gb free
what else can i do? anone encountered similar?
would truly appreciate our kind assistance
thanks a lot
ursfsta

"did try to repair disk but it allowed me only to 'verify'"
You did not follow my post.
Insert your OS installer disk and reboot while holding down the c key. Select Utilities>Disk Utilities. Then run Repair Disk on your ard drive.

Printing/creating PDF problems with Mac OS 10.6.4 and word v.X

In my job at university I use Word 2003 (version 10) in my new iMac. Since I updated to MacOS 10.6.4 I have problems with the printing menu. That means that I can not print or convert to PDF or even generate a preview. When trying to print or obtain a preview, word freezes and I have to force quit. When trying to generate a pdf file it does, but the generated file is unreadable (it says is damaged) and word freezes again. I have played with the preferences, change user and it didn't help. I checked the Font Book and indeed they were many duplicated fonts. I sorted them out, but the problem persists. With very short files it works, but with longer ones word invariably crashes when trying to print or make a pdf. I took one long .doc file and I copied into my laptop (MacBook pro, 2008) that was running 10.6.3. I printed it and converted to pdf; no problems at all. Then, for the sake of knowledge, I updated the system to 10.4.6 and then I couldn't print or create a pdf with the very same file, so it seems that certainly the update is reponsible. So now I know cause but I can not print from any of my computers. To me convert to pdf is an important functionality so I would appreciate any help. I have some ideas: reinstall Office 2003? reinstall 10.6 from the disk (and not update)? use Time Machine to restore the system as it was before the update?
I didn't detect problems in Office 2004, or any other programs in my macs. Unfortunately, I need Office 2003 for compatibility with some other software. Thanks in advance!

I updated my MBP to 10.6.4 last night and today I was printing fine from Word 2008 (v12.2.5). I haven't used Office vX since Tiger so I cannot comment on its stability with the latest update. But I suggest that if you haven't done so already, try opening Disk Utility and running Repair Disk Permissions on the 10.6.4 partition. Once this has completed I also suggest that you reset the printing system, restart your Mac and then add your printer queues again.
*How to Reset the Printing System*
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse (or right click if supported).
4. Click "Reset printing system ..."
5. Restart your Mac

Problem with .Mac Synchronisation

Similar Messages

Maybe you are looking for