Problem with Mega Stick 1 Menus

I am facing a strange problem with Mega Stick 1.
I press the 'Jog Dial' menu button to access the menus. I do see all the sub menus but when I press the jog Dial again to go into the sub menu my Mega Stick takes me back to the mail menu. So basically I cannot go into any sub menu.
I upgraded the firmware of Mega Stick and the sub menus worked only once after the upgradation and after that the sub menues stopped working again.
Anyone has any clue what is wrong and how can I fix it???/

Come on guys please help me ... I am in trouble

Similar Messages

890FXA-GD70 problems with 4 stick of ram

I just built a new rig around the 890FXA-GD70 MB and everything is going great except I have major stability problems with 4 sticks of Ram installed. I purchased 4 sticks of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 from Newegg. The PC will boot fine with all 4 sticks installed and Windows 7 recognizes them but I have a lot of application crashes. No BSOD so far but very frequent app problems. Even the windows event viewer keeps crashing while trying to troubleshoot. I removed two of the sticks and everything has been rock solid. Anyone else successfully running 4 sticks in this board or have any suggestions to stabilize? I'm not trying to overclock anything at the moment.
thanks,

I had similar issues with BSOD. I thought it might be my RAM. I tried all kinds of different settings. Tested it in another system. It worked flawlessly and passed all memtests. I took that RAM and the RAM from the other system (a DELL from work) home. Tried the Dell RAM out and no post. Tried one stick in DIMM2 and it worked stably and then tried two sticks and it worked stably. I then tried my memory (ADATA). I got one BSOD, but ran several memtests and burnin tests over the next 5 or 6 hours. No more issues. SWEET. Reinstalled windows. Ran great for 4 or 5 days and then got more BSOD. I contacted MSI support and on two separate occasions they suggested I RMA the board. I returned the board and got a different one. I've been happy since (no issues whatsoever). I even bought two more sticks of RAM. I'm just saying - maybe it's not your RAM. I can't say for certain that the 890FXA-GD70 was defective. It may just need more BIOS updates. Frustrating to say the least. I feel your pain.
AMD 1055t
MSI 890FXA-GD70 - flashed BIOS to 1.6 early on to try to fix RAM issues (didn't help) = RMA
ASUS M4A89TD PRO
ADATA 4x2gb DDR3 1600
Nvidia GTS 250 on loan from a friend until I select a card
Antec True Power 750w
WD caviar Black 750
Lancool PC-K62
Zalman CNPS10X Performa

Cd rom boot problems with MEGA 180

I recently recieved my MEGA 180 and have been unable to successfully install an OS because when I boot from CD, the computer freezes at various stages of installation. The point at which it freezes varies between the point at which the CD is initialized to anywhere in the windows xp setup process up untill the drive format. Occassionally the lockup coincides with an error copying a file, but this is not consistent. I have tried two different cd-rom drives as well as three different xp installation cds. Further I have run with 5 different sticks of ram (kingston and corsair). None of these changes have had any obvious effect.
Having read the warning labes regarding non MSI optical devices, I am tempted to think that may be the problem as I am not running on an MSI drive. However, the warning souned like it was about mechanical parts and thus I assume the ability of a drive to fit in the MEGA 180 case while opening and closing correctly.
I would appreciate any input you might have on this matter as I am finding this experience rather frustrating.

I had the exact same problem when upgrading from a 2100+ Palamino processor to a 2800+ Thoroghbred one. The screen had already dissappeared due to powering up with no monitor plugged in, so I tried a reinstall of Windows XP. It kept falling over randomly during the install process. I then swapper the CPU back and had no problems at all. I have since lapped the heatsink and reduced the FSB to 157MHz in the BIOS, and have not had a problem with the 2800+ CPU. I have not tried installing windows again, but feel this will be OK too.
My test is to run FujiFilm Snapshot Slideshow, which sends the CPU temp rocketting. I have found that when it goes above 70 C it starts getting unstable. I throttled the FSB back to 157MHz and it does not get to 70 C any more. In normal operation it never gets above 60 C, so I don't know why the slideshow takes so much CPU power

Problem with wlan sticks module, not able to write to disk any more

Hello everybody,
when I booted my PC today, a strange and some sort of severe problem occurred concerning my wlan stick(s) that I think, I'm not able to solve without your help. I searched for a solution but it didn't seem that somebody else has had a similar problem before.
Here is the description:
I have two wlan sticks (but I do not use both of them nor are they both plugged in at the same time), and both happen to malfunction since today. My "main" stick (used most of the time) is a BigTec Wireless 11N Adapter with a Realtek chipset. My second one (only used to solve problems with the other stick) is a Fritz! WLAN USB Stick (to be used with ndiswrapper).
After bootup, which makes no problems at all, my "main" wlan stick is not able to connect to the network. When I run wicd-curses (I use wicd as network manager), the virtual terminal freezes (when I use urxvt under openbox to run wicd-curses, only the window freezes). After one minute, a message appears that says something about a dbus problem but I am not able to read it because of the screen clears. Then I'm able to use the terminal again, but (and this is the very, very strange about this) when I run any program that tries to write on my disk it stucks, so I can't cancel it with ctrl-c nor can I kill the process. Wicd-curses, ifconfig or iwconfig also crash after entering the command and show the same behavior. At this point, my wlan stick does not show any sign of being plugged in (normally it blinks...).
My second stick makes the computer crash: After a few moments a stacktrace is shown (like when a kernel panic occurs), saying something about "stack being overrun". But I can't find the message in the log files so it is difficult to post it.
When I tried to figure out a solution, I saw in pacman.log, that yesterday udev and hwdetect were updated... But also downgrading all the packages that were updated yesterday did not solve the problem!
I'll post now the last lines of a few logs here (but nothing concerning the ndiswrapper stick, else it would be too disturbing), I hope they help you at helping me!
everything.log
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost kernel: [ 21.415035] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
Jan 23 15:25:27 localhost kernel: [ 22.063785] r8712u: 1 RCR=0x153f00e
Jan 23 15:25:27 localhost kernel: [ 22.064534] r8712u: 2 RCR=0x553f00e
Jan 23 15:25:27 localhost kernel: [ 22.170765] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost kernel: [ 22.410354] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
Jan 23 15:25:28 localhost kernel: [ 22.463386] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
Jan 23 15:25:28 localhost kernel: [ 22.463902] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:25:28 localhost kernel: [ 22.735037] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
Jan 23 15:25:29 localhost kernel: [ 23.383789] r8712u: 1 RCR=0x153f00e
Jan 23 15:25:29 localhost kernel: [ 23.384535] r8712u: 2 RCR=0x553f00e
Jan 23 15:25:29 localhost kernel: [ 23.490763] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running
Jan 23 15:26:12 localhost kernel: [ 66.495307] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" # then I hard reset because of the freeze
errors.log
Jan 23 15:00:01 localhost /USR/SBIN/CROND[5597]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
Jan 23 15:20:01 localhost /USR/SBIN/CROND[6215]: (CRON) EXEC FAILED (/usr/sbin/sendmail): No such file or directory
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
daemon.log
Jan 23 15:25:15 localhost [ 0.864888] udevd[48]: starting version 175
Jan 23 15:25:15 localhost [ 4.116488] udevd[235]: starting version 178
Jan 23 15:25:26 localhost dhcpcd[835]: dhcpcd not running
Jan 23 15:25:27 localhost dhcpcd[847]: dhcpcd not running
Jan 23 15:25:28 localhost dhcpcd[854]: dhcpcd not running
Jan 23 15:26:11 localhost dhcpcd[1382]: dhcpcd not running # then I hard reset because of the freeze
I hope you can help me and thank you for trying
hoeffl
P.S.: Excuse all the mistakes I made because of being new here, please!

This seems to be a problem with r8712u on all 3.2.x and 3.3-rc kernels on all distros. I've had it for weeks on Gentoo, Arch, and several other distros.
If you are running a 3.2.x kernel, this is almost definitely the problem. All 3.1 kernels don't do this.
I posted a temporary work-around on the Arch bugzilla, and Larry Finger (kernel dev with wireless) is currently working on it (a patch).
In the meantime, If you compile your own kernels, you can get 3.2.x's to work normally- see my comment here for more details. https://bugs.archlinux.org/task/27996
Top of page doesn't say r8712u, but it's the same problem, and after the first 2-3 comments it deals with r8712u specifically.
There is also info on the Gentoo forum 3.2 kernel quirks thread, towards the bottom of Page 1: http://forums.gentoo.org/viewtopic-t-901702.html
Last edited by wrc1944 (2012-02-03 07:45:32)

Problem with Mega View 561

I'm Italian. Sorry for my english; I hope to be comprensible.
I've just got a Mega View 561, but I had a problem with it.
Now it don't start anymore.
In the manual I read that there should be a restore CD-ROM in the package supplied with the Mega View, but i didn't find it.
I also didn't find a mail address able to connect directly the support in MSI, also in the Internet site.
Could someone help me in some way?
Thanks a lot

Bongiorno,
Try and look if what you need is here.
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=604&kind=6
If not:
[email protected]

Consistant problem with music in menus

Hi For several projects in a row, I have had the same problem with adding music to my menus. The music plays thru for about 30 seconds, then, before repeating the cycle, the first few notes come in for a couple seconds. Why would these first few notes appear between cycles?
Any ideas? Thanks very much, Bob

Thanks for your thoughts, Shawn. This problem is really getting weird, though. Please bear with me: the 30-second aif file that I created for the Menu, was originally taken from a aif part of the movie sound track. I extracted the piece into a sound editing program I use called Peak. In Peak I created a discreet aif file which DOES NOT CONTAIN the notes that constitute the 'blip' which is turning up between cycles of the menu. The notes in the blip don't even exist in the aif file that was dragged onto the menu!! (They are, however, the notes that follow in the original file that the new aif was created from.) How and why would DVDSP find these notes and insist on playing them? This is like Twilight Zone.
Bob

Problems with pull-down menus

I have been having a lot of trouble with Safari Version 7.0.2 (9537.74.9) since upgrading to 10.9.2. One such problem is with pull-down menus in websites. (This is as distinguished from the pull-down menus of Safari itself.) Many websites have pull-down menus. These website menus do not work effectively in Mavericks. For example, one website that is very important to me has a menu that is longer than the height of my monitor. And the selections that I almost always need are at the bottom of that menu. When I scroll down that menu, the menu proceeds too fast, and I almost always overshoot the selection that I want. At that point, then, Safari stops the operation of the pull-down menu, and I have to reload the whole page.
Safari gets worse. Often I try to print a webpage to PDF. When I pull down the "PDF" menu in the print window, I have to be very, very careful to select the exact selection "save as PDF." If I don't, then Safari crashes, and I get a dialog box asking me if I want the OS to send a notice to Apple. I click "Yes." I wish the button said, "Yes, of course, right now, without delay," but it does not. And then I have to wait for Safari to start up again.
Is there a solution to this problem?

Hi, Cesidio, welcome to Apple's user-to-user discussion forums.
You have the last version of Safari that will work with OS X 10.2.x. You might want to give Firefox a try.

Has anyone have any problems with 5s "sticking"?

Has anyone had any problems with the 5s iPhone "sticking"? It's happened to me twice where I press the home button, and nothing happens.

Yes. Very sticky. especially the first time you go to click it after not using it for a bit. Mine feels similar to if there were crumbs underneath, or parts crunching together.
I just got off phone with Apple. I thought it was my imagination and being too sensitive until just now seeing other posts having same complaint. Apple rep on phone said it was not normal and for me to get it swapped out.

Problems with Mega 865 Pro

Hi,
I have a problem with the product Mega PC 865 For. Not risco to install the radio, when the asset tells me no mesa partition found '. what must I do?. Thanks.
Fabio63

Hi !!
To be on the safe side i changed my ram to one piece of corsair ram 512Mb and tested it. Everything works fine.
Managed to install Win 2003 server last night once... It ran for about 30 mins then the machine hang. It didn't restart.
When i try to install both xp or 2003 the machine reboots at the same place every single time. Installing devices. When it
switches from 35 to 34 mins it reboots.
Are there any newer bios than the one i have ver 1.0 !!?? I haven't found it anywhere. I have tested all peripherals inside
the machine in other comps and they work fine.
The thing i have noticed is that it runs very hot !! 58 degrees Celsius just idling in bios !! BTW when the machine is idling
either on a boot floppy in dos or in bios it runs for hours. My conclusion is either the machine overheats in install mode or
some device in the machine (mobo) is faulty. But that seems far fetched too due to one succesful install of win 2003 server.
I use the heatsink that came with the 865 Pro what heatsink do you guys use !!??
The Wizard

Anybody Have Problem with Keyboard Sticking

I have a new Iphone 5S. It was great for 2 weeks. Then the keyboatd began stick, sometimes. What I mean I may touch the same letter 3-5 times before it enters, or I toouch a letter and it becomes huge, sticks there then suddenly lets go and types that letter and more I never touched. The last thing it does is sometimes not space when I use the command, until I try 4-5 times.
Verizon has: Done a partial reset they promised wouldn't cause any problem for me but resetting wallpaper. The tech was soo wrong...Deleted ALL my settings and did not fix issue, Next they sent a refresh. Again no fix. Rhird, we deleted the phone, on the phone, and restored from icloud, ny syncing. Still has this intermittant problem
I loaded the Emjoi Keyboard when I traded from 4s to 5s. For some reason, that was only thing that wasn't there when I setup new phone. That never caused a problem on 4s , so can't imagine thats it.
The operative word is Intermitant here. I just don't get why it isn't doing the things I mentioned all of the time.
Welcome all ideas as Verizon will NOt give me a NEW phone, even tjough mine is not a month oold. I'll have to accept a refurbished one. That really upsets me.
ANY IDEAS?

Hey,
No problems with my Droid 3 and the keyboard. I have not seen any posts in our forums with anyone having that problem either. Sometimes you might can take a Q-tip with a little rubbing alcohol on the tip and clean around the key in question and you might get lucky. If you think it is some type of defect, you might want to contact customer support and they can assist you with your problem. Good luck.
Doc

Focus Problem with JTree and Menus

Hi all,
I have a problem with focus when editing a JTree and selecting a menu. The problem occurs when the user single clicks on a node, invoking the countdown to edit. If the user quickly clicks on a menu item, the focus will go to the menu item, but then when the countdown finishes, the node now has keyboard focus.
Below is code to reproduce the problem. Click on the node, hover for a little bit, then quickly click on the menu item.
How would I go about fixing the problem? Thanks!
import java.awt.Container;
import java.awt.GridLayout;
import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
import javax.swing.JMenuItem;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeModel;
public class MyTree extends JTree {
     public MyTree(DefaultTreeModel treemodel) {
          setModel(treemodel);
          setRootVisible(true);
     public static void main(String[] args) {
          JFrame frame = new JFrame();
          JMenuBar bar = new JMenuBar();
          JMenu menu = new JMenu("Test");
          JMenuItem item = new JMenuItem("Item");
          menu.add(item);
          bar.add(menu);
          frame.setJMenuBar(bar);
          Container contentPane = frame.getContentPane();
          contentPane.setLayout(new GridLayout(1, 2));
          DefaultMutableTreeNode root1 = new DefaultMutableTreeNode("Root");
          root1.add(new DefaultMutableTreeNode("Root2"));
          DefaultTreeModel model = new DefaultTreeModel(root1);
          MyTree tree1 = new MyTree(model);
          tree1.setEditable(true);
          tree1.setCellEditor(
               new ComponentTreeCellEditor(
                    tree1,
                    new ComponentTreeCellRenderer()));
          tree1.setRowHeight(0);
          contentPane.add(tree1);
          frame.pack();
          frame.show();
import java.awt.FlowLayout;
import java.util.EventObject;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
import javax.swing.JTree;
import javax.swing.tree.DefaultTreeCellEditor;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.tree.DefaultTreeModel;
import javax.swing.tree.TreeCellEditor;
import javax.swing.tree.TreeCellRenderer;
public class ComponentTreeCellEditor
     extends DefaultTreeCellEditor
     implements TreeCellEditor {
     private String m_oldValue;
     private TreeCellRenderer m_renderer = null;
     private DefaultTreeModel m_model = null;
     private JPanel m_display = null;
     private JTextField m_field = null;
     private JTree m_tree = null;
     public ComponentTreeCellEditor(
          JTree tree,
          DefaultTreeCellRenderer renderer) {
          super(tree, renderer);
          m_renderer = renderer;
          m_model = (DefaultTreeModel) tree.getModel();
          m_tree = tree;
          m_display = new JPanel(new FlowLayout(FlowLayout.LEFT));
          m_field = new JTextField();
          m_display.add(new JLabel("My Label "));
          m_display.add(m_field);
     public java.awt.Component getTreeCellEditorComponent(
          JTree tree,
          Object value,
          boolean isSelected,
          boolean expanded,
          boolean leaf,
          int row) {
          m_field.setText(value.toString());
          return m_display;
     public Object getCellEditorValue() {
          return m_field.getText();
      * The edited cell should always be selected.
      * @param anEvent the event that fired this function.
      * @return true, always.
     public boolean shouldSelectCell(EventObject anEvent) {
          return true;
      * Only edit immediately if the event is null.
      * @param event the event being studied
      * @return true if event is null, false otherwise.
     protected boolean canEditImmediately(EventObject event) {
          return (event == null);
}

You can provide a cell renderer to the JTree to paint the checkBox.
The following code checks or unchecks the box with each click also:
_tree.setCellRenderer(new DefaultTreeCellRenderer()
private JCheckBox checkBox = null;
public Component getTreeCellRendererComponent(JTree tree,
                                                Object value,
                                                boolean selected,
                                                boolean expanded,
                                                boolean leaf,
                                                int row,
                                                boolean hasFocus)
    // Each node will be drawn as a check box
    if (checkBox == null)
      checkBox = new JCheckBox();
      checkBox .setBackground(tree.getBackground());
    DefaultMutableTreeNode node = (DefaultMutableTreeNode)value;
    checkBox.setText(node.getUserObject().toString());
    checkBox.setSelected(selected);
    return checkBox;
});

Problems with PE10/11 Menus? Read this!!

Had so many problems with Menu backgrounds when burning blu-ray / AVCHD discs.
(1) Image doesn't fit screen - bars on both sides.
Had this response:
Hi Martin,
This is regarding case no.- 183706274 where you were facing issues with the menu templates. It looks like a bug and same has been reported to the Engineering team. They will try to fix it and most probably it will be fixed in the next coming version as whole complete code has to be recreated to get it fixed. So it will take some time. Very sorry for the inconvenience.
Best regards,
DVA team
(2) Poor quality Scenes Menu and misalignment of button highlights
Experienced seemingly random behaviour - sometimes image/alignment ok, other times terrible. Spent hours trying to isolate problem...and today, cracked it. The problem is with MOTION MENU buttons.
If you want decent quality Scenes Menu, DON'T HAVE MOTION MENU buttons. STILL FRAMES cause NO PROBLEMS. Sorted.
There is clearly a conflict between video and menu images. Cannot believe these things weren't picked up on during testing?!? Have reported my findings to Adobe; let's see if they act upon them.

Yeah, the second phase scan skip was a fluke find. Was doing some testing the other day and decided not to go to the end of the training session. I hit back, and was surprised to see the newly registered finger entry...
The picture that's shown with "adjust your grip" depicts the edge of the fingertip, and every time I tried that the first 2 weeks after launch, it failed 100% in no time at all. I guess it just does not like some fingers
The bigest thing I've found the works for me is nailing down a small enough area following the 3 rows, 3 columns I outlined. It's what's given me the best results to date.
Thanks, and to all here as well. Happy Thanksgiving! Maybe we can turn this turkey around

Safari 7.1 creates problems with drop down menus from some sites

I blindly install Apple updates, but with Safari 7.1 I run into problems with the drop down menu of www.arcweb.com. As this is my main client it is a big problem. Any suggestions or solutions?
thanks
Jean

Empty Caches.
1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.

Problem with firefox and menus

I have an intermittent problem in Firefox with menus. I click on a menu or a drop down button and, as soon as I move my mouse over the menu, it disappears. The only way to select something on the menu is to leave my mouse where it is and use the arrow keys and enter to select an item.
Not sure if it's relevant, but I'm using fluxbox as my window manager.

There has been a bugreport about this, I can't find it right now, but this seems to be a bigger issue. I had this behavior with i3. The behavior was a bit different than you described, but it also affected the menus, so it's related. And yes, this made me very angry as well

Problem with Photoshop created Menus

One of the great features of Encore is that you can bring in HD content and create both a Blu-ray and a DVD from the same project. Unfortunatley this doesn't always work.
I create most of my menus in photoshop and use text or round circles for navigation. If I create a menu that is sized for blu-ray (1440x1080) and then burn a standard widescreen DVD, the buttons or text sub-picture will be cut off. This problem exists in CS4 and is still there in CS5. I would often create HD sized DVD menus even for my DVDs in case the client would later want Blu-ray. For the longest time, I couldn't figure out why my circle buttons would be cut off. You really don't see the issue until the DVD is burned and it's played back in a DVD player. Once I re-sized the menu to standard def wide screen, everything comes out ok but I would like to be able to just create one size menu and use it for both DVD and Blu-ray. Anyone know a work-around?
Thanks
Chris

Chris,
The Scaling algorithms in PS are very powerful and offer so very much control. Those in PrPro are merely OK, as it is not an image editing program. Encore is even less an image editing program, so does not even have those Scaling algorithms, that PrPro does.
All one has to do is Edit in Photoshop, Scale (choosing the best algorithm) and Save - done.
Until Adobe decides to marry Encore with PS, I doubt that we'll see things in one place, but that Edit in Photoshop is so very easy.
Good luck,
Hunt

Problem with Mega Stick 1 Menus

Similar Messages

Maybe you are looking for