Problem with non-wireless Orange Livebox and WRT54GS

Hi all,
I have a non wireless Livebox modem that I was using perfectly. The livebox modem is able to connect itself to the internet, so the only thing I have to do is to plugin the laptop lan cable into the modem and it works.
So I decided to add wireless capabilities and bought the WRT54GS. I followed all the setup steps until the point when it says that it can't connect to the internet. So the setup is the following: the linksys router is connected to the livebox modem via Ethernet cable, though I don't think I need any PPPoE settings as the modem already dials in itself (it's actually also a router I guess).
Currently I'm trying to use Linksys with the Livebox using DHCP instead of PPPoE. It won't work and I don't have the Livebox PPPoE settings.
Is this a very specific scenario ??
I would really like to solve this!
Many thanks,
Joel

Hi,
After some browsing on info on the internet I found how to fix the problem.
Since I have two routers chained together, their private LAN IP addresses must be in a different network. So I changed the default router private IP address from 192.168.1.1 to 192.168.2.1
Now it works.

Similar Messages

Problem with Non Reference Single ended and Differential measurements

The following was misposted at the Real-Time DAQ category and should appear in this Multifunction DAQ category:
I am doing a differential measurement and then a non referenced single ended AI measurement using the same PCI 6025E card. Most of the time I get good measurements however a small percentage of the time I get very strange measurements.

Make sure that you have set up each of your channels for the appropriate mode of measurement. By default, Measurement & Automation Explorer (MAX) has a property set for your card, either differential, nonreferenced singled ended, or referenced single ended. If all your channels are in one mode, then you can just left those defaults stay. Otherwise, as in your case, you would need to programmatically set each channel for the right mode.
For instance, in LabVIEW, the AI Configure.vi has an input parameter for "coupling and input config". This is an array of data that includes the measurement mode. Each element of the array corresponds to the element in the channels array, so you can configure each channel appropriately. Make sure that you have this set up in yo
ur program, and you should get the correct measurements.
Finally, double-check your physical connections to see that they match the measurement mode you chose. You can find this in the 6023E/6024E/6025E User Manual or the PCI E Series User Manual at the http://www.ni.com/manuals website.
Regards,
Geneva L.
Applications Engineer
National Instruments
http://www.ni.com/ask

I'm having problems with the wireless LAN Guest and Windows 7

Only with Windows 7 when a user logs in in the Guest WLAN two connections appear in Windows 7, the user authenticates on the page but does not leave the internal network. Can someone help me with this?
We uses WLC 4400 and LAP 1252

I have the same issue. Using webauth and Windows 7 and IE9 and windows 7 and firefox. Also MAC\Safari.
Client gets an IP address, accepts the certficate error message. But never gets to the webauth page.
I have a TAC open so will update when i get more info.

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Problems with non-ascii keywords

I have some problems with non-ascii keywords that makes the whole keyword feature useless for me. I don't know if I'm doing something wrong or if there something I'm missing completely.
The problem is that when I enter something like "grön" iPhoto sometimes refuses me to type in "grön" on another photo and "eats" the "ö". And if I select the matching keyword from the popup list iPhoto has changed the originally "grön" to "gr¨ön" (if that comes out right on the web). Here are a few screenshots to show what happens
If someone knows what happens I would really appriciate some hints on how to avoid this.
Note that adding/editing keywords works just fine in Aperture.

There is a long standing issue with iPhoto and non-ascii characters. I know of no solution.
iPhoto menu -> Provide iPhoto Feedback and report it as a bug.
Regards
TD

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

My host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?

There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane.

Window 8 WiFi problem with Cisco wireless network

Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad App

This problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts.

I'm having problems with a wireless Logitech mouse

Since upgrading to ML i'm having problems with a wireless Logitech mouse that worked well prior to the update. I'm using the current Logitech Control Center software. No other mouse software is on my Mac Mini. If I use a Guest Aacount the problems ( wheel and back button ) are not present. Any suggestions?

You might try the Logitech support site. There are communities on there:
http://www.logitech.com/en-us/support/keyboard-mice-combos
Here is a link to drivers:
Logitech Drivers
You might check your home folder/Library to see if you can find a Logitec .plist.
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~/Library. Delete the .plist(s) for the mouse.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

TS3048 I am having a problem with my wireless keyboard on my iMac

I am having a problem with my wireless keyboard on my iMac. Sometimes the keys seem to have a life of their own and I get a string of the same letter or symbol even though I only pressed the key once. Does anyone know how to rectify this?

Hello:
Try resetting the PRAM and SMC.
If that does not help, the KB is probably failing.
Barry

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with non-wireless Orange Livebox and WRT54GS

Similar Messages

Maybe you are looking for