Problem with Portlet Backing Context
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel
Vijay -
You might want to post this to the Portal newsgroup.
Regards,
Kunal
"vijay patel" <[email protected]> wrote:
>
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using
this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel
Similar Messages
-
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Problem with OEM backing up on windows system.
Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.You may want to take a look at these metalink notes:
Ref.
Subject: ERROR in RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:246107.1 Type: PROBLEM
Last Revision Date: 08-JUL-2004 Status: PUBLISHED
Subject: How to Configure RMAN to Write to Shared Drives on Windows NT/2000
Doc ID: Note:145843.1 Type: BULLETIN
Last Revision Date: 21-OCT-2005 Status: PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/ -
Problem with the back button in the Alv ouput
i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K -
Problem with getting back "synchronous" process result!!!
i have created the partner link to my synchronous process which is already on the server, along with the input and output variable for dealing with that particular process...
my input variable matches the xml schema of my synchronous process... when i expand the input variable node, i can see the elements which i'm trying to pass as the input to my synchronous server.
HOWEVER!!! there's a problem with my output variable, clicking expand on the node, it displays nothing (basically it's suppose to be in the format of the xml schema which i have specified).. hence i cannot work with the output of the asynchronous process...
cheers,
Shivek
how do i fix this problem..can you please provide little bit more details? where do you click output variable? are you clicking from bpel console debugger?
-
Im facing problem with my back camera.it's keep on hanging
PLease help me fix my problem regarding my back camera because it keeps on hanging.please help solve this problem.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Problem with exporting back to LR from PS
I exported a photo to PS as always for and edit but when I was done it didn't go back to LR. I can only open from PS. How do I get it back to LR and why did this happen?
Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ? -
Problem with portlets with XSLT generating dynamic portal compatible links
Hi,
We're using XSLT to transform XML data to HTML in a portlet. The problem is that
the XML contains headlines and we need to create links to the complete article,
which has to be displayed in the same portlet. How do I create a portal comaptible
link with XSLT? In the JSP you can use the netui tag library like:
<netui:anchor action="..">
link
<netui:parameter name="id" value="{id}"/>
</netui:anchor>
but how can I achieve this with XSLT? We tried generating the xsl with a jsp,
but this doesn't work since the data entered in the value attribute of the netui:parameter
tag will be encoded causing the XSL transformer to fail.
Is there an easy solution to this? Or can XSLT only be used with very simple content?
ArdWe're trying to display some news headlines, clicking a headline has to invoke
an action to display the complete article in the same portlet (using pageflow).
When displaying the articles we use XSLT like (this is a JSP generating XSLT):
<?xml version="1.0"?>
<%@ page contentType="text/x-xslt"%>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="html"/>
<xsl:template match="items">
<xsl:apply-templates select="item"/>
</xsl:template>
<xsl:template match="item">
<nobr>
<%-- ###### Here we need an action link, with the title as a request parameter
###### --%>
<xsl:value-of select="@title"/>
</nobr>
</xsl:template>
</xsl:stylesheet>
The XML is like:
<items>
<item title="some title"/>
<item title="some other title"/>
</items>
We need to generate a portal compatible link which invokes an action (show_details)
with the title of the article as a request parameter.
I know how to do this in a JSP, but since the data is in XML we like to do this
with XSLT.
Can you help?
Subbu Allamaraju <subbuATBeaDOTCom> wrote:
Could you elaborate (perhaps with some xsl snippet generated by jsp)
the
failures you were getting with xslt?
Subbu
Ard van der Scheer wrote:
Hi,
We're using XSLT to transform XML data to HTML in a portlet. The problemis that
the XML contains headlines and we need to create links to the completearticle,
which has to be displayed in the same portlet. How do I create a portalcomaptible
link with XSLT? In the JSP you can use the netui tag library like:
<netui:anchor action="..">
link
<netui:parameter name="id" value="{id}"/>
</netui:anchor>
but how can I achieve this with XSLT? We tried generating the xsl witha jsp,
but this doesn't work since the data entered in the value attributeof the netui:parameter
tag will be encoded causing the XSL transformer to fail.
Is there an easy solution to this? Or can XSLT only be used with verysimple content?
Ard -
Problem with invalidating a context node
Hi,
Please see the code below:
String s = wdContext.currentSubitemsElement().getBase_Quantity();
wdComponentAPI.getMessageManager().reportWarning(s);
wdContext.nodeSubitems().invalidate();
String s1 = wdContext.currentSubitemsElement().getBase_Quantity();
wdComponentAPI.getMessageManager().reportWarning(s1);
For some reason, the context is not cleared after the invalidate command. Any ideas for this?
Thanks in advance,
AviadHi Aviad,
Let me guess the origins of problem:
1. As far as you mentioned <b>Sub</b>items node, there should be a parent node, say Items.
2. Subitems node has either supplying relation role or supply function, Items has no supply function.
3. Then, if you invalidate Subitems, supply function is called or supplying relation is used to populate content. When you do contenxt reset, then all controller nodes get invalidated including Items. Hence Subitems has no parent and displayed as empty.
If all the above is true, then you may either to invalidate Items node or make Subitems node with no supplier (i.e. manually bind content instead).
Context reset works here, but, it's a bit "brute force" approach.
Valery Silaev
EPAM Systems
http://www.netweaverteam.com/ -
Hello. I am using jsf 1.2 with struts 2 (for portlet support) in weblogic. Jsf is used trough struts 2 jsf-plugin. In weblogic i am getting this error :
>
javax.portlet.PortletException
at com.bea.portlet.container.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.java:143)
at org.apache.struts2.portlet.result.PortletResult.executeRenderResult(PortletResult.java:200)
at org.apache.struts2.portlet.result.PortletResult.doExecute(PortletResult.java:91)
at org.apache.struts2.dispatcher.StrutsResultSupport.execute(StrutsResultSupport.java:185)
at com.opensymphony.xwork2.DefaultActionInvocation.executeResult(DefaultActionInvocation.java:355)
Truncated. see log file for complete stacktrace
javax.servlet.ServletException: weblogic.servlet.jsp.CompilationException: Failed to compile JSP /WEB-INF/jsp/view/index.jsp
index.jsp:16:26: No property editor found for the bean "javax.el.ValueExpression".
<h:panelGrid columns="3">
^-^
index.jsp:17:29: No property editor found for the bean "javax.el.ValueExpression".
<h:outputText value="Employee Id:" />
^------------^
index.jsp:22:26: No property editor found for the bean "javax.el.ValueExpression".
<h:outputText value="Back" />
^----^
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:247)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:391)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
Truncated. see log file for complete stacktrace
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /WEB-INF/jsp/view/index.jsp
index.jsp:16:26: No property editor found for the bean "javax.el.ValueExpression".
<h:panelGrid columns="3">
^-^
index.jsp:17:29: No property editor found for the bean "javax.el.ValueExpression".
<h:outputText value="Employee Id:" />
^------------^
index.jsp:22:26: No property editor found for the bean "javax.el.ValueExpression".
<h:outputText value="Back" />
^----^
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:296)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:200)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:164)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:391)
Truncated. see log file for complete stacktrace
>
My JSP file :
>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core" %>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html" %>
<f:view>
<html>
<!-- todo: make header variable -->
<head>
<title>JSF Integration Examples</title>
</head>
<body>
<h1>Modify Employee</h1>
<h:form>
<h:panelGrid columns="3">
<h:outputText value="Employee Id:" />
</h:panelGrid>
<h:outputLink>
<h:outputText value="Back" />
</h:outputLink>
</h:form>
</body>
</html>
</f:view>
I don't have any faces-config and my web.xml looks like :
>
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="bookmark-portlet">
<!-- JavaServer Faces Servlet Configuration, not used directly -->
<servlet>
<servlet-name>faces</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>JspSupportServlet</servlet-name>
<servlet-class>org.apache.struts2.views.JspSupportServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<!-- JavaServer Faces Servlet Mapping, not called directly -->
<servlet-mapping>
<servlet-name>faces</servlet-name>
<url-pattern>*.action</url-pattern>
</servlet-mapping>
</web-app>
Does someone know why i get this error?Someone with any solution?
-
Hello All,
Please refer to following link where I provided the messaging Queues.
http://farm4.static.flickr.com/3486/3882733944_1c74be83f7_o.jpg
Basically the problem is when the value is sent to target it comes like...
After remove Contexts:
SUPPRESS
1234
SUPPRESS
After SplitByValue
null
1234
SUPPRESS
So the node is not creating the field at all in the target as there is null in the begining.
I tried by
1. Changing contexts with different combinations.
2. wrote a UDF to get rid of null in the begining. It dint work
help.
Venkat.Thanks Luis.
I tried with mapWithDefaults earlier but it was changing the null to SUPPRESS but no change in the target field output ( i.e it is still not coming )
Can someone please tell me how to do I get rid of null in the output?
null
12345.23
SUPPRESS
Output:
12345.23
It should also work for following....
null
123455.24
434567.23
345654.23
SUPPRESS
Output :
first structure : 123455.24
Second structure: 434567.23
Third structure: 345654.23
Venkat. -
Hopefully someone can help me with the following problem, I'm trying to setup a demo of portlets for a customer.
I've downloaded the latest portlet wizard addin that supports JSR 168. But after following the installation instructions it did not work for me.
When clicking the finisch button on the Java Portlet wizard the following exception occurs:
Exception occurred during event dispatching:
oracle.xml.parser.v2.XMLDOMException: Node does not exist.
org.w3c.dom.Node oracle.xml.parser.v2.XMLAttrList.removeNamedItemNS(java
.lang.String, java.lang.String)
XMLAttrList.java:711
I've tried this with jdev 9.0.3.2 and 9.0.3.3.Hello Jelco,
Did you install the Java Web Service Developer Pack 1.3 or 1.2 ?
My guess is you are using the 1.3 and this is the reason why you have get this error.
Sun provide access to all previous downoad in the archive section:
http://java.sun.com/webservices/archive.html
If you installed 1.3 could you please install 1.2 and let me know ?
Regards
Tugdual -
Problems with Portlet projects
Hi,
Started using Java Studio Enterprise recently (now that it's free) since I am developing portlet applications for an organization running the enterprise system in production use.
The IDE is great (love the UML stuff) but I've run in to a couple of problems that are really slowing me down.
When I run a portlet project in the Application Server (using the Harness portlet provider/Portal Server simulator) I noticed that every request made to the Portlet is duplicated. So if I have a line like...
System.out.println("Portlet: doView()");
... in the Portlets doView method I get this in the server log:
[#|2006-01-13T12:09:27.093+0200|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=31;|
Portlet: doView()|#]
[#|2006-01-13T12:09:27.109+0200|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=31;|
Portlet: doView()|#]
Why is this happening and what can I do about it? I first noticed this when I was using a DAO from a portlet and all my sql statements got executed twice!
The other thing that's annoying me is that when i shutdown the ide, my datasource reference is whiped out from my web.xml file. So everytime I start Studio Enterprise I have to manually edit the web.xml file to get my datasource working. I have configured my datasource with the IDE (new File > Sun Resource -> JDBC resource...).
Any ideas?Unfortunately this is a bug in in JSE 8.0. It will be fixed in the currently developed JSE 8.1, but for now there exists a work-around (quoting our portlet builder engineer):
1. Go to folder <userdir>/config/ps/Harness
(e.g.: "C:\Documents and Settings\<username>\.jstudio\Ent8\config\ps\Harness")
2. Open jsp file "PSSimTarget.jsp" in
<userdir>/config/ps/Harness/web/desktop/default/harness/PSSimTarget.jsp
3. Find next lines at the top of the file:
<i18n:set
var="locale"><%=ProviderHarness.getHarness(request,response,pageContext).getLocaleString()%></i18n:set>
<i18n:setLocale value="${locale}" scope="session"/>
<i18n:setBundle basename="i18n.Bundle" var="myBundle"/>
4. Replace it with next lines:
<%
HttpSession httpsession = request.getSession();
ProviderHarness tmpObj =
(ProviderHarness)httpsession.getAttribute("desktop.Simulator.ProviderHarness");
if (tmpObj == null) {
%>
<i18n:set var="locale"><%=ProviderHarness.getHarness(request,response,pageContext).getLocaleString()%></i18n:set>
<%
%>
<i18n:setLocale value="${locale}" scope="session"/>
<i18n:setBundle basename="i18n.Bundle" var="myBundle"/>
Every time when you start studio with new userdir, you should change PSSimTarget.jsp to avoid double requests. -
Hi all,
I need a suggestion on a program created by me, when I launch
the program, which is a transaction in which the inside there are
buttons that are related to the programs, when accessing a program,
if I press the BACK button does not return to main screen of the
transaction but to the main screen of SAP. Taking a ride in debug,
I noticed that because of the management SUBMIT BACK in a sense,
the neglect,
how can I avoid this?
Best regards.i have a similar problem. am using ipod video 30GB enhanced 5th gen. i tried to sync with itunes 6, but i got something like this - "your device requires the latest version of itunes. please install itunes 7"
the problem is, i installed itunes 7 but i could hardly update my ipod. not even to uncheck the "open itunes when ipod is connected" checkbox. if i do that and click 'Apply', itunes 7 will simply freeze, and after a while it gave me some error message. that was why i reverted to itunes 6.
so, is there any way i could make my ipod to work with itunes 6? it it helps, i NEVER 'sync'ed my ipod with itunes 6 before. i downloaded itunes 7 right after i bought the ipod last week.
Dell Inspiron 630m Windows XP Pro
Maybe you are looking for
-
Hi, We have a scenario, in which we need to insert or update the data in the SAP r/3 based on the availability of the primary field in the SAP r/3. For ex, if i have the employee details in SAP r/3 where in for a particular existing employee the sala
-
I received an email containing pdf files. I am using Adobe Reader Touch for Windows 8. File doesn't open. I am a new user to Windows 8.
-
Premiere Elements 12 - Timeline Rendering Question.
Hello All. When I add my video files to my timeline, press the "Render" button for a smoother timeline, after the process has finished, the quality looks terrible. Am I doing something wrong?
-
How to select data from multiple dropdowns(HTMLDB)
Hi, How to get the data from multiple dropdowns in the same report. Both the dropdowns are gerring data from the same table. Ex: abc-1st dropdown pqr-2nd dropdown. when abc and pqr are blank, it should display all records by default. If abc="some val
-
Dscl: unable to ad/delete/amend user/group records - eDSPermissionError
hello, i am unable to add/delete/amend opendirectory user and group records. users are still connecting but when i try do any of the above if get the follow error within a dscl session: create Users qawsed <main> attribute status: eDSPermissionError