Problem with purchased content

heya guys,
In the time I have had my iPhone I have bought 2 audio books. One I bought direct from iTunes and then synced it onto my iPhone and then the other I bought on iTunes while in a coffee shop over wifi.
The book I bought in iTunes can be found in the 'purchased' section of iTunes. However the book I bought yesterday on the phone is working fine and all but after syncing the phone with my computer I can't see it in 'purchased' or 'purchased on iPhone section' of iTunes.
Does anyone know how I can resolve this problem. The book was quite expensive and if I destroy my phone somehow the content would be lost.
Cheers

Welcome to the Apple community.
Try repopulating iTunes with the problematic files.
If the problem persists, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Similar Messages

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

The file .docx cannot be opened because there are problems with the contents in sharepoint document library

I created a site and created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
in it .
As per my requirement I am saving the above site as site template .
After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
The problem is I am getting error while opening the word document
Error - The file filename.docx cannot be opened because there are problems with the contents .
Details - No error details availble .
Indresh

What are you doing within the txt document? Is it general text and string based items, or have you something more elaborate going on?
An older discussion here elaborates a bit more on the dotx vs docx side of things.
http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Problems with html content in box

Hi! I have a problem with html content. For example photoswipe. If I import the folder with the index.html of photoswipe as an article all works fine. If I link it trough the folio overlay creator/webcontent) into a box in indesign dps, it stays empty. Seems like it doesnt find the images/paths??
Klaus

This sounds familiar. PhotoSwipe doesn't seem to like working in a web content overlay unless the JavaScript and other source files are uploaded within HTMLResources. This means editing your local HTML file so that paths to the JavaScript, images and CSS files begin by pointing to HTMLResources virtual folder (../../../HTMLResources/) before their subfolder and filenames. It's worth a try.

Problem with purchase orders and cancelling order lines

Hi,
We have a problem with purchase orders and cancelling order lines. For example we have created PO no. 4300291277:
We have made a GR 5000186897 on 03.09.2010 amount 1.920 and tried to cancel it with GR 5000208866, but it takes the invoice amount 1.724 instead of 1.920. What is the correct way to undo this orders, so we cancel the 1.920 and not the 1.724?
Please help me, your help will be highly appreciated.
Regards,
Najma.

hi,
You have to cancel the IR first...and then do cancel the GR...
yes, there will be diff. in the price(if the price changes in bwtn)..if no changes in the price , the price will taken as old one..
Process:
1. Cancel IR
2. Then cancel GR..
3. then go the PO and try to delete the line item..
Regards
Priyanka.P

My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

Your content is stored locally on your computer, when you update, it will not mess with your content at all.

"The file .docx cannot - problems with the contents."

Word 2007 file HELP!
I started a paper this morning and saved it as normal, however when I try to reopen it I get the following messege: The file .docx cannot be opened because there are problems with the contents. Does anyone know how to resolve this issue?

Hi,
Please check if this applies:
http://support.microsoft.com/kb/2528942
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

Having problem with purchases. Message is saying my billing info is incorrect

Having problem with purchases. Message is saying my billing info is incorrect

Make sure your payment information on your iTunes account matches with your bank's. If it's correct and you still cannot purchase, you'll need to contact support and have them check your account.
http://www.apple.com/support/itunes/contact/
Cheers!

PHDS - problem with the content license

Hi, I have just enabled the basic phds settings in my httpd.conf (ie not the PHDSCommonKeyFile / PHDSPlaybackExpiration / PHDSOutputProtection / PHDSVideoEncryptionLevel) settings:
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    JitFmsDirPath ".."
    HttpStreamingContentPath "/full/location/to/content"
    HttpStreamingJITConfAllowed false
    EncryptionScope server
    ProtectionScheme phds
    Options -Indexes FollowSymLinks
</Location>
</IfModule>
And whilst when hitting the video_bitrate.mp4.f4m file i get the expected xml back with the drmAdditionalHeader element, when I view it in the adobe multibitrate hds player i get the error "There was a problem with the content license., plesae contact your video service provider" - has anyone seen this before?
Thanks

Hi, the "adobe multibitrate hds player" is the one you see on the http://server:8134 home page.
I installed 4.5.3 from scratch and left all the defaults with the exception of EncryptionScope server & ProtectionScheme phds - the http error log showed the below when visiting http://server:8134 - [Mon Oct 01 08:34:18 2012] [debug] mod_headers.c(756): headers: ap_headers_output_filter()
The player does say in the bottom right "This video content is DRM protected" and the crossdomain.xml exists and looks like:
<cross-domain-policy>
<allow-access-from domain="*"/><site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Itunes states that my computer is not authorized to download an audio book I purchased from itunes. No problem with purchased songs however.

Itunes states that my computer is not authorized to download an audio book I purchased from itunes. No problem with purchased songs however.

Hello susanserio
Try Deauthorize your account and then Authorize the account to see if any changes occur. Also there may a resolution in the second article that can be helpful as well.
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problems with purchasing iMac 27" online

I recently bought an iMac 27" from the Apple Online Store as a X'Mas present for my girlfriend. The problem with purchasing online is that I have to stay at home all day for TNT to deliver as I live on my own.
When I received the good, I noticed that the original transparent sticker on the box has been opened and another placed on top of it. I called Apple Sales Support and they said there is no way that should happen. After some back and forth phone calls, they eventually get back to me and said they customs opened it to check, and they offered me to exchange or refund. But I trusted them that there should be no problems so I kept it since if I exchange it I won't be able to give it to my girlfriend on X'Mas Day.
When we opened the box on X'Mas Day, we realised that the tilt on the display is very loose. I went to a few shops and checked their displays and none are as loose as mine.
Now I need to wait for the courier to come and pick up my faulty iMac and then need to wait for Apple to send a new iMac. The good thing is I do not need to carry it back to the shop.
I seem to think Apple's product quality is going downhill. I purchased a photobook recently using iPhoto and the quality of the paper and printing is worst than before.

Sorry to hear of your problems, but these are user to user forums and we cannot help with the issues you've detailed - you will need to contact Apple directly.

Problem with purchased content

Similar Messages

Maybe you are looking for