Problem with redirection and google analytics
Hello,
I created my professional website with iweb and bought a domain name for it can be simplest to remember, so this professional domain name (www.julienchabot.com) redirect to the iweb url (web.mac.com/julienchabot/iweb/com/home.html). Now I subscribed to Google Analytics to know the statistics of my website, but it seems that when people visit www.julienchabot.com, google analytics doesn't register any visit on my website, it only registers something when the iweb url (web.mac.com/julienchabot...) is visited, so only when I visit my website as a webmaster because I'm the only one to know this url.
So it's very frustrating for I can't know the statistics even if Google analytics seems to provide fantastics results !!!
However, when we're on julienchabot.com and that we read the source code, the correct code and iweb url appear on the top of the window... Does the problem come from the redirection company I subscribed to ?
Has someone a solution to this problem ?
Thank you very much for your help !!
Julien
Dear Gretsch,
Thank you for this website, I just registered but unfortunately the problem is still the same ! I think it's due to the redirect company I subscribed to, they use "frames" for the redirection.
Do you use frames as well for your website ? StatCounter asks if it's the case before providing the code and I replied "yes", they specify to put the code in the main page where there's not the "frame" code, but I don't know where this "frame" code is written, so I put the StatCounter code on the homepage one, but it's the same than with Google.
Would you mind provide me the url of your website for I can compare your code to mine ?
Thank you very much for your help !
Julien
Similar Messages
-
Problems with iOS4 and Google Mail (ActiveSync/Exchange)
So, I’m one of those people whose greatest virtue isn’t patience.
Minutes after its release I HAD to install iOS4 onto my iPhone 3GS. Since there’s no upgrade procedure implemented (yet?), upgrading took just short of a lifetime: the iPhone was completely wiped, then iTunes installed iOS4, then the backup was restored to the iPhone. All in all, an probably thanks to the enormously big Navigon app, this took almost 90 minutes.
Everything looked fine… but after a couple of hours of normal usage I ran into a “little” problem…
I unplugged the iPhone at around 10 am with a fully charged battery. After just four hours (during which I received 10 mails, 5 push messages and made one call of approx. 3 minutes) the battery was down to 63%. Normally it should still be in then 90s…
It seemed as if, somehow, Mail.app crashed and went wild – draining battery like crazy and heating up the device.
Back home, I deleted my Mail accounts, rebooted the iPhone, added my Mail accounts again (manually) and recharged the iPhone to the fullest.
During the next 5 hours (in a region with full 3G coverage) I received another 15 mails, 10 push notifications and 1 text message, which I also replied to.
The battery was down to 53%.
This morning, I downloaded the “iPhone Configuration Utility” to gain access to the iPhones “console output”. You can find the, in my eyes, relevant parts below this post.
There are some timeouts for com.apple.mobilemail.autofetch and a few reports of an EASIconnection dying with “Error Domain:NSURLErrorDomain Code=1001″ which obviously means “This operation couldn’t be completed”.
Furthermore, from time to time, the EASIASFolderItemsSyncTask fails.
As of now, I assume that this is some kind of problem between Mail.app on my iPhone and the Googlemail server, which I’m accessing via ActiveSync/Exchange, since I’d like to get my mails pushed to me.
I then deleted the Googlemail Exchange-Account and replaced it with the "normal" IMAP-Account. That works fine.
Right now I'm testing with other Exchange servers to see if this problem is on the iPhone/iOS part or on Google's side.
Anyone else noticing this?!
Wed Jun 9 07:22:44 unknown MobileMail[55] <Warning>: Power assertion timeout for “com.apple.mobilemail.autofetch”. Simply releasing it now.
Wed Jun 9 07:23:15 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×6070720
Wed Jun 9 07:23:15 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:23:15 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:23:15 unknown MobileMail[55] <Warning>: ERROR: MFMessageErrorDomain/Generic – Die Verbindung mit dem Server ist fehlgeschlagen.
Wed Jun 9 07:27:59 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×60795b0
Wed Jun 9 07:27:59 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:27:59 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:29:58 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×60795b0
Wed Jun 9 07:29:58 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:29:58 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:31:42 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×1b5230
Wed Jun 9 07:31:42 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:31:42 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:32:50 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×1b5230
Wed Jun 9 07:32:50 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:32:50 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:36:31 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×1b5230
Wed Jun 9 07:36:31 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:36:31 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:37:09 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×1b5230
Wed Jun 9 07:37:09 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:37:09 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:37:41 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×1b5230
Wed Jun 9 07:37:41 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:37:41 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:38:53 unknown MobileMail[55] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×60a5d80
Wed Jun 9 07:38:53 unknown MobileMail[55] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:38:53 unknown MobileMail[55] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:52:11 unknown MobileMail[645] <Warning>: EAS|Daemon died, trying to resend folder monitoring info for folders: [{(
Wed Jun 9 07:52:11 unknown MobileMail[645] <Warning>: DA|Mach error in -[DADConnection openDADConnectionOnRunLoop:] communicating with daemon: (ipc/send) invalid destination port
Wed Jun 9 07:52:34 unknown MobileMail[645] <Warning>: EAS|EAS Protocol Manager set to ASProtocolUnknown
Wed Jun 9 07:52:35 unknown MobileMail[645] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1028 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1028.)”
Wed Jun 9 07:52:39 unknown MobileMail[645] <Warning>: EAS|EAS Protocol Manager set to ASProtocol12_1
Wed Jun 9 07:53:26 unknown MobileMail[645] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×610c400
Wed Jun 9 07:53:26 unknown MobileMail[645] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 07:53:26 unknown MobileMail[645] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 07:53:26 unknown MobileMail[645] <Warning>: ERROR: MFMessageErrorDomain/Generic – Die Verbindung mit dem Server ist fehlgeschlagen.
Wed Jun 9 08:03:20 iSchack-iPhone MobileMail[645] <Warning>: EAS|connection died with error Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)” 0×191ae0
Wed Jun 9 08:03:20 iSchack-iPhone MobileMail[645] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=NSURLErrorDomain Code=-1001 “The operation couldn‚Äôt be completed. (NSURLErrorDomain error -1001.)”
Wed Jun 9 08:03:20 iSchack-iPhone MobileMail[645] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”
Wed Jun 9 08:03:29 iSchack-iPhone MobileMail[645] <Warning>: EAS|connection died with error Error Domain=ASHTTPConnectionErrorDomain Code=503 “The operation couldn‚Äôt be completed. (ASHTTPConnectionErrorDomain error 503.)” 0×1fb790
Wed Jun 9 08:03:29 iSchack-iPhone MobileMail[645] <Warning>: EAS|ASFolderItemsSyncTask failed: Error Domain=ASHTTPConnectionErrorDomain Code=503 “The operation couldn‚Äôt be completed. (ASHTTPConnectionErrorDomain error 503.)”
Wed Jun 9 08:03:29 iSchack-iPhone MobileMail[645] <Warning>: error syncing folder: Error Domain=MFMessageErrorDomain Code=1042 “The operation couldn‚Äôt be completed. (MFMessageErrorDomain error 1042.)”Firmware update 4.0 has not been released to the general public yet, and it won't be released to the general public until 6/21.
Firmware update 4.0 is for registered developers only. As a registered developer, you have access to Apple's developer discussions area which is where you should post your question. -
[SOLVED] firefox problems with Twitter and google+
I've been having some issues with firefox. I don't know if they are related, but they've been getting on my nerves.
First off, Twitter just shows a blank page with the background picture. I can't view any twitter posts at all.
Secondly, pages which check for browser compatibility all seem to report that my browser isn't supported (it is). For example, Google+ gives me a "Your Browser is no longer supported." page while the list of supported browsers states: "Linux : Chrome, Firefox 3.6 and up".
I'm using the latest version of firefox from extra (7.0.1-1). Also, these problems are not new to this version, as they have been occurring for as long as I've had this computer (~10 months). Any help will be greatly appreciated.
Last edited by fredre (2011-10-07 19:28:30)Disabling the plugins did nothing, but creating a new profile seems to have fixed it.
I still don't know what caused the problems, but I've migrated all my stuff over to the new profile and everything is working well. I'm marking this thread as solved, thanks for the help! -
So, Apple finally released the feature I've been waiting years for - the ability to upload to FTP in iWeb '09. This is really awesome because iWeb can upload changes to a site only instead of having to export the site to my hard drive then upload the entire site via a separate FTP program.
The only problem is it has basically broken my Google Analytics support. I used to use a Automator script to automatically add Google Analytics code to each page before manually uploading, but now that iWeb does the uploading itself, I can't do this anymore. And the way iWeb implements HTML "widgets", it loads javascripts in a separate file instead of in the main HTML file of each page, which basically means Google analytics won't work.
Does anybody have a good way to get Google Analytics working in an iWeb page without exporting the page and uploading with a separate FTP program?J-a-x:
I started using iWeb '08 when it first came out and have been very happy with it. I purchase iLife '09 and have switched to iWeb '09 with very few problems. I use Statcounter (and Google Analytics on one site) and ran into the same problem that you have indicated. Initially, I used the Publish to FTP function and used html snippets for the Statcounter code which worked OK.
One of the problems with using iWeb is that the pages do not always look the same in Safari as they do in IE7. What I do not is publish to a folder then through VMWare Fusion, look at the pages in Internet Explorer. The main difference that I am finding is the text boxes. This procedure allows me to make sure that the pages veiw correctly in IE7 before I publish them.
Once, I am happy with the pages in the website, (at the recommendation of Roddy) the pages are optimized through Website Maestro (WSM). This creates another folder in your Sites folder with each site optimized. I then use iTweak to add the Statcounter codes to the optimized pages and then upload to the server with Fetch. WSM has the upload function, but last night I could not figure out the paths correctly so I used Fetch.
FYI, I am also using Multisite with iWeb '09 and it seems to work fine. I maintain three websites, two of which have similar information. I can be working on a site, use Multisite to quickly switch to one of the other websites, copy information, then switch back to the previous site and paste the information. Seems to work well.
I think an important thing to remember is that most of the people that view your website are going to be using Windows Internet Explorer so it is very important that you make sure that the view they see is correct; in that case WSM is a must have.
Is iWeb '09 worth the upgrade? Yes, I think so even though I have chosen no to use the Publish to FTP function, the Publish to Folder option is much enhanced. There may be some additional enhancements that make it easier to use that I do not use and am unaware.
Hope this helps! -
Again, I have a net book ( ACER ) and run Mozilla / Firefox
with Google as home page ....
Most recently, ( the last 4 weeks ) I have been besieged by abrupt Internet crashes ( Win Sys 32 ) ... and when I browse on Firefox ( google ) ..... my web selection ( NY Times .... other ) immediately moves to REDIRECT. Please help in this
[email protected]
again thanksGoogle ATI Firefox crash. You'll see ATI video cards have multiple problems with Firefox and also internet videos. Also, note the dates these problems occurred - many are 2011...
-
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
Problem with youtube and other video websites
I have a problem with youtube and other video websites:
Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
grts,
agrashHmm, so that person had a conflicting plug in.
Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash -
Problem with list and map in GWT
I have a problem with map and list in GWT. I need to put a map in to a list but GWT does not support ArrayList and HashMap since they are not serialized types.
Exactly I want to create following list with out using ArrayList and HashMap
ArrayList<HashMap<String, Object>> map = new ArrayList<HashMap<String,Object>>(); Thank you for new ideas,
RegardsIf try to use ArrayList then I receive following exception when I make a rpc call.
Caused by: com.google.gwt.user.client.rpc.SerializationException: Type 'java.util.ArrayList' was not included in the set of types which can be serialized by this SerializationPolicy or its Class object could not be loaded. For security purposes, this type will not be serialized.: -
Problem with sending and receiving e-mail through exchange [GMail]
Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhonehttp://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/
-
Problem with v and w in a cube
Hi,
I have problem with 'v' and 'w' in an Analysis Services cube (SQL Server 2008R2).
The example is employee number 'frvi' and 'frwi'. The cube summarize both employee's measures to employee number 'frvi'. And does not show the employee number 'frwi'. When I make a sql query in the source db it works fine.
The collation for Analysis Services is Finnish_Swedish, and for the source db Finnish_Swedish_Cl_AS. Is it a problem with the collation?
I hope I'll get help here!
//Anna-KarinHi,
Thank you for your answer.
I read now somewhere that w became a letter of it's own in the Swedish language in year 2006. That I did not know. The question is how it is handled in the different collations. I have googled a lot today about this, but have not found anything.
Do you know if you can change the collation in a cube afterwards, and how you do it?
It is correct - when I run a query i management studio, it gives me values for both frwi and frvi. But in the cube the values are summarized to employee frvi.
Best regards Anna-Karin -
Problems with email and SMS after 1.3.5
Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
Are there any known compatibility issues with iMac and Google Chrome?
Does anyone know of any compatibility issues with iMac and Google chrome. A Facebook friend who is a photographer posted recently that Chrome had ruined his iMac. He stead that it ran an update on itself that made safari and chrome unusable - slow running overall. In the end he had to reinstall his OS.
Is anyone aware of this and should I un-install Chrome off my Mac?
Thanks,
S.There is nothing official but your post will attract a variety of personal experiences. I once loaded Chrome and found myself with the dreaded MacKeeper malware, loads of pop ups and conflicts with my system. Part of the problem is the huge range of add ons you are tempted to take on, many of which are not as strictly tested as Apple extensions. I would say, unless you have a specific reason, leave it alone. The best browser is Firefox and for Macs, Safari is OK.
-
Problem with JFrame and busy/wait Cursor
Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.
Maybe you are looking for
-
ssince I updated my iPhone 5s to ios8 ive had nothing but problems... first the the screen rotation is not working... Checked the settings and lock is off.... The wifi is intermittent, some times it works sometimes it doesn't.... the he iPhone is re
-
Is this a Safari issue or a Dice issue, or both? http://community.dice.com/t5/Customer-Support/Using-Safari-with-this-website/td- p/191198 My post The font size is WAY WAY too small, and I have had some other issues as well. One of which is when I cl
-
MAcbook blocked due to wrong password, how to restart it ??
My MacBook pro is blocked,answering me password to restart ... I write the password I think good but everytime I try,it says to me that password or Username is wrong ! I don't understand but now i'm really blocked and can't use the Mac Is someone abl
-
Oracle RAC performance Suddenly terminates on one of the two node cluster
I have a strange problem that happens frequently from time to time when My M400 Machine which is a part of two node RAC cluster goes down suddenly I tried so many times to understand what's the cause behind that but when I read the logs there are so
-
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 200
Hi Guru, I m in the process of upgradation from 4.6C to ECC 6.0. In Asset Accounting in 4.6C there is a facility of batch input thereby the user can replace the block cost centre by new one. As this facility is not available in ECC 6.0 so I have figu