Problem with RTL 8029

Hi!
i was trying to make my RTL 8029 NIC works under solaris 8
when i boot my computer and press ESC i can see that detected a Network Adapter..
but when i try to configure it I get the following error....
bash-2.03# ifconfig hme0 192.168.1.4 netmask 255.255.255.0 up
ifconfig: status: SIOCGLIFFLAGS: hme0: no such device
How can i do to make my NIC works?
Do i need a driver or module? -Where can i get it?
Can i use a driver for Unix or Linux?
Thx!!!

Hi I had a similar problem with a RTL8139, it could help you.
I got the drivers for RTL 8139 (it was from realtek website, a friend got them for me, solaris8139(105).zip) and a readme file (solaris-readme.txt) with the explanation how to install it.
The only problem I had after I got and install the drivers was that the NIC didn't keep attached the IP address, so I added the next script to rc3.d directory
ifconfig hme0 192.168.4.15 (my IP address)
ifconfig hme0 up
route add default 192.168.4.1 (my gateway address)
This solved my RTL problem.
Yasmin

Similar Messages

Problem with RealTek RTL 8029 NIC Card on Intel Sol8

Hello friends,
Is it true that I can't configure RealTek RTL 8029 NIC Card on Solaris 8 that installed on Intel Machine? I have searched few matched msg, but still found not solution. Many of them just got so frustrated that they just either bought another nic card or when with other platform!
Any suggestion will be appreciated. thanks. :-)

I am using a driver I downloaded from here:
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
Works and install easily but you MUST read the README!
Lee

Problems with composing a message with Gmail in RTL mode

It happens in RTL mode when you mix Hebrew text with numbers or with English text.
It happens only in Firefox. No problem with Chrome or IE browsers for example.
Steps to reproduce:
1. Type some Hebrew text without hitting the "enter" key. like שנה טובה
Gmail correctly identifies the text as being from an RTL language and aligns it to the right (RTL mode)
2. At the end of the Hebrew text type some English text (or some numbers ). Happy new year January 2015
So you end up with a line with "Happy new year January 2015 שנה טובה"
3. Start clicking the Backspace key. After a 3-6 clicks the backspace is not responding. (same bad behavior with the right and left navigation keys).
Tested in a new/fresh profile.
Also tried it with a different gmail account and got same problems.
Firefox 34
Win 7 x64

You can try to experiment with these two prefs on the <b>about:config</b> page;
*bidi.texttype (1) 1:Charset 2:Logical 3:Visual (selection -> 3)
*bidi.edit.caret_movement_style (2) 0:Logical 1:Visual 2:Visual|Logical:selection
*http://kb.mozillazine.org/bidi.edit.caret_movement_style
See the comments about bidi prefs in this file (open via the location bar):
*resource://gre/File:greprefs.js

Z77-GD65, problems with video signal

Got some problem: with external graphics card (ASUS GTX660-DC2TG-2GD5) the signal disappears after a while (about 1-3 minutes) - display goes off and has floating table "No signal".
Without external card, through the integrated video - all works fine.
Has anybode had this problem?
I had a BIOS like 10.0 and then updated it to the latest version ( 10.8 ) via M-FLASH, but nothing has changed.
My system:
. MSI Z77A-GD65 (RTL) LGA1155 < Z77> 3xPCI-E+Dsub+DVI+HDMI+GbLAN+1394 SATA RAID ATX 4DDR-III
. CPU Intel Core i7-3770 BOX 3.4 ГГц / 4core / SVGA HD Graphics 4000 / 1+8Mb / 77 Wt / 5 / LGA1155
. Corsair Vengeance < CMZ8GX3M2A2133C11R> DDR-III DIMM 8Gb KIT 2*4Gb < PC3-17000>
. ASUS GTX660-DC2TG-2GD5
. Corsair TX750 < CP-9020042-EU> 750W ATX (24+2x4+4x6 / 8pin)

Yes, the forum's USB method is the safest there is. That and the reflash will ensure the ME firmware has been updated properly. Yes, you do have a safety net with the B BIOS chip.
As a side note, you shouldn't have any graphics problems when W7 is installed like some have with W8.
Edit: Problem is you need an OS installed with the forum method.
2nd edit: Recommend then to run on the onboard ports to the monitor with the discrete card removed to get the OS, drivers, reflash, etc. taken care of. Then the matter of the graphics card not working right can be addressed.
3rd edit: Has the graphics card been tested in another machine to verify it is not possibly faulty?
4th edit: Sorry about all the edits, but as I think about it, more things come to mind. Have you been connecting the discrete card with HDMI or DVI? Some compatibility issue can be a possibility with a non compliant v1.4 HDMI cable or a monitor conflict. Some Apple monitors have been known to be problematic from time to time.

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun fatha/damma etc. would reverse automatically. Is this a known bug?

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!

Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ

Problem with Keynote

Hello, anyone knows about a problem in Keynote(iWork) that whenever I write with a RTL language, and make "Build" in Inspector, it doesn't not show the whole word or sentence, and sometimes it doesn't show the entire sentence.
Is this problem solvable?
Thank you,
Balig

All iwork apps have major bugs with RTL scripts and are normally not suitable for using them, unless copy/paste from another app like TextEdit works well enough to meet your needs. Sometimes different Effects may give better results than others.
In any case, such problems are not related to your hardware and you should ask in a software forum like
https://discussions.apple.com/community/iwork/keynote

Installing Illustrator CC with RTL support

Hello
I have two issues mixed up. I need to install Illustrator with RTL support (aka ME version)
I cannot install Illustrator via Application Manager - it fails with the message "The download appears corrupted. Please try again after a few minutes.(-60)"
I found Adobe's recommendation to download and install a trial version if this happens and register it. After some searching I could find a direct link to Illustrator installer, but not to the ME version. And that non-ME version does not seem to have the RTL support.
I'd appreciate any ideas - either how to solve the Application Manager issue, or where to download the ME version trial installer from, or how to get the non-ME version to support RTL...
Thanks in advance
Boris
P.S. An additional problem is that now (i.e. after installing the trial) the Application Manager is not "aware" of the fact I have the Illustrator installed...

You need to solve the install problem.
Try and post into the dedicated forum:
http://forums.adobe.com/community/download_install_setup
You might also try:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html
http://helpx.adobe.com/x-productkb/global/troubleshoot-unexpected-behavior-user-account.ht ml
http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Problem with threads running javaw

Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.

troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort      socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
     JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
     System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue;      // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer)      // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
     out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
                         JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
     out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
//     System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
     }catch(Exception a){
     JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run

Problem with threads and camera.

Hi everybody!
I've a problem with taking snapshot.
I would like to display a loading screen after it take snapshot ( sometimes i
have to wait few seconds after i took snapshot. Propably photo is being taken in time where i have to wait).
I was trying to use threads but i didn't succeed.
I made this code:
display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while((!performing.isShown()) && (backgroundCamera.isShown())){
                    Thread.yield();
                notifyAll();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    this.wait();
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();This code is sometimes showing performing screen but sometimes no.
I don't know why. In my opinion performing.isShown() method isn't working correctly.
Does anyone have some idea how to use threads here?

Hi,
I've finally managed to work this fine.
The code:
       Object o = new Object();
       display.setCurrent(perform);
        new Thread(new Runnable(){
            public void run() {
                while(!performing.isShown()){
                    Thread.yield();
               synchronized(o) {
                  o.notify();
        }).start();
        new Thread(new Runnable(){
            public void run() {
                try {
                    synchronized(o) {
                       o.wait(1);
                } catch(Exception e) {
                    exceptionHandler(e);
                photo = camera.snapshot();
                display.setCurrent(displayPhoto);
        }).start();

Problem with threads hanging

We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy

Problem with threads and ProgressMonitor

Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?

Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating

Problem with threads and/or memory

I'm developing an application where there are 3 threads. One of them sends a request to the other, and if the 2nd can't answer it, it sends it to the 3rd (similar to CPU -> CACHE -> MEMORY). When i run the program with 1000-10.000 requests, no problem occurs. When i run it with 300.000-1.000.000 requests, it sometimes hangs. Is this a problem with the garbage collector, or should it be related to the threads mecanism.
(note: eache thread is in execution using a finite state machine)

i had been running the program inside Netbeans.
Running the jar using the command line outside
Netbeans i have no more problems... Does Netbeans use
it's own JVM?Depends how you set it up, but look under the options. There are settings for the compiler and jvm that it uses.

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Problem with RTL 8029

Similar Messages

Maybe you are looking for