Problem with SCCM 2012

Is there any way to enter the system center configuration manager 2012, some manual data equipment such as: I want to enter data for any IP phone that is not detected on the network or a printer not detected on the network, this possible to manually enter
data on any device SCCM.

Hi,
It sounds like a task for System Center 2012 Service Manager instead which actually has a CMDB in the product.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

OoB Problems with SCCM 2012 SP1 CU1

Hi around, perhaps somone has tried this things out already and has a little hint for me.
After we got OoB Managment to work under SCCM 2007 we switched to SCCM 2012 now i have some problems bringing it to work again.
We use a Verisign Certificate for Provisioning, the Firewall Ports (9971 on Server and 19992, 16993 and 16995 on Client) are opend. The autoenrollment is active. DHCP 06 and 15 are set and configured.
The IIS SSL Settings are configured to accept Client Certificates and the Bindings are set to the Web Server Template. We tried to configure it using the Verisign Certificate but it didn't work that way either.
The Webserver Template is build after the Step by Step guide from MS.
The Verisign Certificate was build the same way, Organization Unit is set to Intel(R) Client Setup Certificate. It was imported in the Personal Certificate Store, exported and implemented in the Enrollment Point.
The AD Group exists and the Oob Managment Server has the permissions it needs.
The Oob Managment Point was configured like shown in the MS Step by Step guide.
The Client i'm testing with was fully unprovisioned.
Now the only Status i get is detected and when i try to discover AMT the amtopmgr.log brings the following errors.
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
**** Error 0x1e5ab3d0 returned by ApplyControlToken SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoSoapDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 11001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://OurMachine.test.de:16993 , 484001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoKerberosWSManDiscovery failed. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
session params : https://10.37.135.52:16993 , 15001 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
ERROR: Invoke(get) failed: 80020009argNum = 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Description: A security error occurred SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Error: Failed to get AMT_SetupAndConfigurationService instance. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
DoWSManDiscovery failed with user name: admin. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
Discovery to IP address 10.37.135.52 succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute, discovery to OurMachine succeed. AMT status is 1. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CSMSAMTDiscoveryTask::Execute - DDR written to D:\CM2012\inboxes\auth\ddm.box SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='OurMachine.test.de' P2='' P3='' P4='' P5='' SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
CStateMsgReporter::DeliverMessages - Created state message file: D:\CM2012\inboxes\auth\statesys.box\incoming\vww2tcjc.SMX SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Succeed to run the task OurMachine.test.de. Remove it from task list. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Work thread 3624 exiting. SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 3624 (0x0E28)
General Worker Thread Pool: Current size of the thread pool is 0 SMS_AMT_OPERATION_MANAGER 12.07.2013 09:36:39 9236 (0x2414)
We double checked the admin Account in the OOB settings but the password is right and i can manually log in to the MEBX with it.
Has anyone some suggestions what could be wrong?
Thank's for the help.

Yes, I know this is an old post, but I’m trying to clean them up.
Did you solve this problem, if so what was the solution?
By the sounds of thing the problem is with your certificate. Can you manually provision a Certified to any of these systems?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Problem with SCCM 2012 R2 Component status messages

Hello,
I have a strange problem with Component status messages. When I try to view all messages from any component, I receive an error message stating that the data could not be recieved from the database. Reporting point is installed.
And when I try to run a report, nothing happens. The report doesn't run.
Any idea??

Oooopsss... Status messages disappeared again !! nothing suspect in srsrp.log and compmon.log.
There are these entries in compsumm.log that got my attention
The machine account will be used for ["Display=\\DataBaseServer.domain\"]MSWNET:["SMS_SITE=CPS"]\\DataBaseServer.domain\.~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.643+300><thread=3152 (0xC50)>
Successfully made a network connection to \\DataBaseServer.domain\ADMIN$.~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.643+300><thread=3152 (0xC50)>
Failed to read Operations Management component registry key values on DataBaseServer.domain; error = 5 (0x5).~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152 (0xC50)>
Failed to read in current property values and initialize COpsMgmtComponent object; error = 5 (0x5).~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152 (0xC50)>
Error: Failed to initialize the COpsMgmtComponent object for component SMS_SITE_SQL_BACKUP_S206UT24.CSDPS.QC.CA on machine DataBaseServer.domain. : L’opération a réussi.~~ $$<SMS_COMPONENT_STATUS_SUMMARIZER><12-17-2014 20:00:00.909+300><thread=3152
(0xC50)>

Deploying CC Enterprise Applications With SCCM 2012

Hi all,
We are using CC Packager to package up individual applications (Photoshop, InDesign etc) and are having trouble deploying the applications once packaged. To deploy, we are using SCCM 2012 and are deploying to Windows 7 x64 clients. It appears that the install begins on the client, then hangs, never to finish.
We are running the MSI with the REBOOT=ReallySuppress and MSIRESTARTMANAGERCONTROL=Disable commands, but with no luck.
This has us really stumped. The applications seem to package fine, yet just won't install. If we manually run the installer, we can see it begin installing, then the progress bar goes backwards and the installation ends without displaying any sort of message.
Also, as an FYI, we have followed this guide closely in our attempts: http://helpx.adobe.com/creative-cloud/packager/deploying-packages-sccm.html
Has anyone experienced a similar problem? Any ideas?
Thank you in advance.
Ryan

Windows 7 x64 Clients
Deploying with SCCM 2012
I have called Adobe before and was told that the application package needs to be on a local drive on the computer. The package cannot be installed if the package is sitting on the network. My installation for a adobe creative cloud package fails to install when I try to install the application from the software center. At some moment the installation searches to ensure it is on a local disk. Not sure how this happends. If you place the installation package on a drive on your computer the package will install, although it will take time depending on how many applications you have packaged.
Another problem that you might have is having users log out of the applications without admin previlages.
I have yet to find a solution for these two problems, I could really use some help from someone who has sucessfully deployed a creative cloud package to a user.
Thank you

AMT 3.2.10 Clients with SCCM 2012 on Windows 2012

Hey
I have a couple of HP dc7800 computers with Intel's AMT/vPro that I'd like to provision with SCCM 2012. The installed firmware version is 3.2.10 which is a supported version according to the documentation [1]. Provisioning of newer clients (5.2.x upwards)
is successful, so I can rule out all the usual suspects like the provisioning certificate from GoDaddy, our internal CA, DHCP options, etc. Provisioning with SCCM 2007 of both 3.2.x and 5.x AMT devices is also still successful.
The amtopmgr.log repeatedly shows the following entries:
Provision target is indicated with SMS resource id. (MachineId = 16777325 WS45.mydomain.ch)
Found valid basic machine property for machine id = 16777325.
Warning: Currently we don't support mutual auth. Change to TLS server auth mode.
The provision mode for device WS45.mydomain.ch is 1.
The IP addresses of the host WS45.mydomain.ch are x.x.x.x.
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4.
Attempting to establish connection with target device using SOAP.
Create provisionHelper with (Hash: 74B7792EDBD64EBB01E2E3A0B27FAFA04C2D3BCB)
Set credential on provisionHelper...
Try to use provisioning account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioning account #0.
Try to use default factory account to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using default factory account.
Try to use provisioned account (random generated password) to connect target machine WS45.mydomain.ch...
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
**** Error 0x37f2b370 returned by ApplyControlToken
Fail to connect and get core version of machine WS45.mydomain.ch using provisioned account (random generated password).
Error: Device internal error. This may be caused by: 1. blabla...
Error: Can NOT establish connection with target device. (MachineId = 16777325)
After some investigation with Wireshark, I've found out that SCCM tries connect with TLSv1 to the AMT device. The response from the device is immediately an SSL alert (internal error). Using OpenSSL, I could connect to the device if I explicitly told it
to use SSLv3. This leads me to believe that the 3.2.x firmware cannot handle TLSv1 correctly and SCCM never tries to connect with SSLv3 after a failure.
So the question is: How can I get SCCM 2012 to provision these devices?
Regards,
Ingo
[1]
http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigOOB

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

Remote WSUS integration with SCCM 2012

Hi,
We are currently having WSUS already in place for Patching , but not used at all its just installed.
can remote WSUS be integrated with SCCM 2012 server which is on different server ? what is the best practice ? is it to have WSUS on same server as Primary server?
or I decommission it and install a new WSUS on same server as SCCM server.
what steps have to be taken care if remote WSUS is integrated ? any documents or steps to be taken care .
Thanks in Advance

When you install SUPs, they automatically configure the underlying WSUS instance to sync from an upstream server based upon your ConfigMgr hierarchy.
A couple of notes here though:
- You generally shouldn't use an existing instance of WSUS for ConfigMgr. Once integrated into ConfigMgr, WSUS should no longer manage approvals, update binary downloads, or update binary distribution as these are all handled by ConfigMgr separate from WSUS.
Using an existing WSUS instance where this was the case can be problematic at best and will cause unexpected behavior and results.
- Clients do not choose SUPs based upon boundaries or location so using a remote SUP is typically not beneficial and in many cases will cause additional network load. The exception to this is if the SUP is within a secondary site.
Jason | http://blog.configmgrftw.com | @jasonsandys

I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

Hi,
I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
I don't agree and I have not Heard this Before, just that you use TS for some scenario.
Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
/SaiTech

Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used.
Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
App-V allows you to run on multple O/S types.
To be honest both technologies have their pros and cons.
Cheers
Paul | sccmentor.wordpress.com

How to find using SQL query application deployed on win 7 machines with SCCM 2012 server or user installed manually.

Hi,
how to find using SCCM SQL query, application deployed on win 7 machines with SCCM 2012 server or user/technician installed manually. Please let me know.

Thanks, is it not possible via any script also?
Like Torsten said, how can you tell the difference between CM12 installed applications and locally installed? Once you can answer that, then you can write report.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to manage Forefront Endpoint Prorection Security Client 2010 with SCCM 2012

Hi
I've sucessfully installed System Center Configuration Manager 2012
and now I 'd like to push/deploy Forefront Endpoint Protection Client 2010 on client machines.I also know that Microsoft embedded Forefront Endpoint Protection in SCCM 2012 so that you can manage FEP from single SCCM 2012 console.Now
when I try to push FEP client on client machines using Default Client Settings
then I've found that all Endpoint Protection settings are greyed out !
Do I need to install Forefront Endpoint Protection 2010 or 2012 Server (which is beta) with SCCM 2012, in order to deploy FEP client or is there a workaround or solution to resolve this ?
Thanks
Sohail

Hi,
Endpoint Protection 2012 is builtin in SCCM 2012, you simply add the Site Role called Endpoint Protection either on your CAS if you have one of those or on your Primary site Server. FEP is no longer a standalone installer and it is a released product and
no longer Beta.
Then the Endpoint Protection Client Settings will no longer be greyed out and you can deploy the System Center 2012 Endpoint Protection client.
http://technet.microsoft.com/en-us/library/hh508760.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Airwatch MDM integration with sccm 2012

I want to integrate Airwatch MDM with SCCM 2012 SP1. I am not able to find out any documentation for the same. Can anybody help me with the said.
Thanks and Regards Deepak

There is an integration between AirWatch and ConfigMgr 2012. I've never used it so I can't comment on it.
https://tool.microsoftsca.com/Partner/?id=737
Watch the video here
http://airwatch.wistia.com/medias/7463a8aae8
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to prompt for OU during OSD Task with SCCM 2012 R2?

How to prompt for OU during OSD Task with SCCM 2012 R2?

Hi,
Here is an example on how to do it using a Variable prompt in Configuration Manager, It works the same way in SCCM 2007,
http://www.the-d-spot.org/wordpress/2013/04/01/dynamically-join-computer-to-ad-ou-during-osd-with-sccm/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Deploymen fix with sccm 2012 R2

Hello Guys
I need deployment a patch in 235 windows 7 x86 and x64. I was created the package and also create a .bat file with the following contents
wusa.exe <fix.msu> /quit /norestart
The package is distributed but when is running appears a windows with the parameters of wusa
Who I can distributed this patch with SCCM 2012.
Thanks for your help
Regards

Hello
I running .bat file with the parameters
wusa.exe <fix.msu> /quit /norestart
In the station of user appears a messages with options of parameters wusa.
Exist other method?
Regards

Windows Intune with SCCM 2012 R2.

Windows Intune with SCCM 2012 R2.
I am able to download Certificate Signing Request (CSR).
When I submit CSR file to Apple Push Certificates Portal I get following prompt:
Do you want to open or save create02fe592d.json (132 bytes) from identity.apple.com?
I am unable to get the APN Certificate.

That is a known issue with Internet Explorer and the Apple Website. If you just go back to the main page where all your certificate are located you can download it from there.
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Problem with SCCM 2012

Similar Messages

Maybe you are looking for