Problem with scheduled publishing

Post Author: yyu
CA Forum: General
Hi,I'm trying to publish a report daily, but CR keeps on taking the system time instead of my setting. Perhaps there are parameters which are controlling this? Any ideas? Thanks!

Hi,
Please make sure the TREX processes are up and running. Restarting TREX may help you.
Regards,
Masa

Similar Messages

Problem with scheduling planned orders in MRP

There is a problem with scheduling planned orders in MRP. SFG is assigned to the BOM of FG. No inhouse production time maintained in the material master of SFG & FG. routing maintained for both . In OPU5 scheduling & capacity reuiremnts tickmarked for detailed scheduling. Scheduling level - via detaied scheduling. Scheduling type - backward. Adjust basic dates , adjust dep. req. to order start set. In MD02 , scheduling is via ' lead time scheduling'.
My problem is the start date & time & finish date & time is same for planned orders of FG & SFG in the detailed scheduling tab of the planned orders. (Duration is same because of same capacity requirements on the same work centre. But how is the finish date same for both SFG & FG?)
(Capacity requirements are being generated.)
What could be the problem ?

Dear,
By scheduling the routing and maintain lot size dependent time in material is best practice and result of scheduling will be consistent.
If you want SFG before FG you need to define lead time offset in BOM or need to maintain the floats before production.
Hope clear to you.
Regards,
R.Brahmankar

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Problem with iWeb publishing to IE

Hello, I am experiencing a problem with iWeb '08 publishing content to Internet Explorer. The images and web pages look fine in Safari and in Firefox, but a lot of the web page images are mirrored in IE, covering up large parts of the text. Please don't tell me I have to spend $79.00 on upgrading to iLife '09. I just upgraded my iWorks to '09, but would upgrading to '09 in this instance even be the answer? Please advise. I fear that I will alienating any of my IE web surfers. Any help and advice would be greatly appreciated. Thank you.

Hello and welcome to the board.
IE is a terrible browser to render pages made with IWeb (I'm not sure upgrading to ILife 09 will fix your problem).
I decided to somewhat "alienate" my IE visitor by putting a message on my home page that recommend them to use a compatible browser. Check my page (using IE here: http://www.wesdotphotography.com/Home.html) and look at the message. Also if you use any other browser you will not see my message and will experience a better browsing. It is not the fault of IWeb but more like Microsoft not writing a proper browser. a lot of people will confirm my say.
Search this forum and you will see a lot of complaints about IE.
Good luck
Thierry
PS: post you website so we can take a look.
+Disclaimer: I may receive compensation via Google ads if you visit my website.+

Sales Order Stock - Problem with Schedule line

Hi guru,
I have a problem with my schedules line.
We use the Sales order stock ( using MB1B with good movement 412/E) for some specific customers.
Even if the sales order reservation works well, there is an issue with the schedule line in the order.
Indeed when i enter the material in the order the schedule line display an availibily in 8 days even if the material is out of stock or available now....
When i enter the same materila in a standard order(with item category without special stock E) the schedules line are good...
What is it the most weird is that i have done the customizing by copying the standard item and i have just added the special stock E in the item category.
If anyone can help me!!
Thanks a lot

hello Lakshmipathi,
Thanks a lot for your reply.
I tried to change the requierement class in order to put one with special stock E as you explained, but i still have my weird schedule line. When i put the item in the order it is 0 stock for today, but stock find in 12 days either if there is stock or no(unrestricted stock i mean).
If i change the RDD in more than 12 days the stock is available for the date requested.
If you have an idea of what could be wrong because on my case i want the schedule line to be at 0 while the sales order reservation has not been processed (via MB1B/412/E) and once the stock movement is done the schedule line has to be find.
I dont know if im clear enought..
To be more clear, i want the schedule line based on the "sales order stock" and not on the "unrestricted stock".
thanks for your help!
Guillaume

Lightroom 4.1 problems with book publishing at Blurb

I've done a travel book using the Lightroom 4.1 bookmaking function with Blurb. This has been a major headache. The book is large landscape (13 X 11 inches) with a hardcover image wrap. It is 124 pages on Proline Pearl Photo paper. There are 412 images. Once the book was created I took the time to resize all images to their use in the book to keep the book file to Blurb under the 2 geg limit. It turned out to be 1.1 geg.
I created the book in Lightroom without too much trouble. Replacing each image with the smaller duplicate was a pain. Unfortunately Blurb can't deal with my Lightroom 4.1 book file. They've spent a significant amount of time trying to figure out the problem with this book file. With the book completed I tried to upload multiple times. The images and pages uploaded ok. It would then stall out and give a server communication error after 3 or 4 hours had passed. There are evidently some problems with Blurb and Norton, so I turned that off, with no success. I exported the book as a pdf file, trying to get around the server upload issues. Unfortunately the only choice of pdf version in Lightroom is 1.6. Blurb only works with X-3, so that did not work.
After extensive discussions with Blurb individuals I exported the book as a catalog. This was sent with the images and the .lrcat file to Blurb's drop box.
The information below is their email back to me after Blurb worked with the Lightroom book file.
"Thanks for your patience.
I was able to open your book project without any issues in Lightroom - unfortunately, I wasn't able to upload it to your account or even export it as a PDF or JPG. As a matter of fact, you had more success with it, as the files never even went through the render process for me. To troubleshoot this, I tried the following:
- deleting the cover images/text and choosing a new cover layout.
- deleting the first half of the book project.
- deleting the second of the book project.
- deleting all pages of the book, added 20 blank pages, removed the cover image.
- renaming the project.
- duplicating the project, then renaming it.
After each of these, I tried exporting to PDF and uploading to Blurb, but I had no luck. Unfortunately, it seems that your Lightroom book project may have some sort of corruption in it and that your best bet is to contact Lightroom support directly from the link below. They should have more detailed information on helping you with this problem, as Blurb only handles the actual printing of your file.
http://www.adobe.com/support/imaging/supportinfo/
I'd be interested in hearing what you find out.
I apologize again for the inconvenience."
I appears to me at this point that using Lightroom 4.1 for book production is a lost cause, and it appears to be a Lightroom problem. Do others have these issues also. My plan now is to manually redo the book with the resized images using Blurb's own software. This has been an painful education and my one major disappoinment with Lightroom.
--Gerry

Just got off Adobe Live Chat. A quick summary is contact Blurb. How is that for a run around. This is a major disappointment with Adobe support.

Problem with scheduling reports

Hi,
We produce reports in Crystal XI R2 and then publish to Enterprise. We have noticed a recurring and 'random' error with certain reports
The reports run fine in Crystal and in Infoview when run on demand. However when we chose the schedule option, the report goes through the motions of running ie status = running for a suitable period of time and goes to Sucess. However when we try to open the report the 'blue bar' will go about 50% and then freeze without opening. After that Infoview hanges and we need to restart. This always happens with certain reports but other similar reports schedule fine.
Any ideas?
Cheers
Clive

That is the problem Clive. I've had similar experiences that had me baffled. Whenever you attempt to open the successfully scheduled report, the subreport is run. Therefore you will have to wait for the subreports to complete before the report opens. Sometimes this took hours, leaving me to think that it froze. But it usually eventually comes up. With each page you go through, the subreport is run again and again. This is very annoying.
I would try modifying the type of subreports I use. Try the report with "On Demand" subreport and "In Place" subreport. See which one gives you better performance. I usually only use subreports for 1 page summary reports. Other than that they take too long. I've had reports that I've redone because the subreport version takes too long.
It is much easier to run these reports on demand.

Problem with XML Publisher report when there are no detail records.

I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.

Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode

PROBLEM WITH XML PUBLISHER AND GRAPH NOT DISPLAYING IN ORACLE APPS

Hi
All you XML Gurus here. I have a problem, When i create a report in XML Publisher desktop i can see a graph im putting into the report on preview and works fine. But when i upload the report as a rtf file into Oracle applications i can see everything else the table logo and stuff .. But just not the Graph Itself when run on the concurrant manager....
Problem number 2
Is there a way that i can use XML Desktop and create a line graph with 2 lines rather than 1 plotting
here is my xml for graph i have made with one line
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(.//SELF_OTHERS)}" rowCount="1">
<RowLabels><Label></Label></RowLabels>
<ColLabels>
<xsl:for-each select=".//SELF_OTHERS"> <Label><xsl:value-of select="BEHAVIOUR"/></Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select=".//SELF_OTHERS"> <Cell><xsl:value-of select="SCORE"/></Cell>
</xsl:for-each> </RowData>
</DataValues>
</LocalGridData>
</Graph>
All help would be much appreciated to my 2 problems....
Thanks
Sha

Hi All
Will post solution tomorrow or Monday on blog. Heres the chart XML for now.
chart:
<Graph graphType="LINE_VERT_ABS"><LegendArea visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//SALE, 'YEAR'))}" rowCount="3">
<RowLabels>
<Label>SOFTWARE</Label>
<Label>HARDWARE</Label>
<Label>SERVICES</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/YEAR" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SOFTWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/HARDWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SERVICES)" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
with the following data
<?xml version="1.0" encoding="UTF-8"?>
<SALES>
     <SALE>
          <YEAR>2006</YEAR>
          <SOFTWARE>1200</SOFTWARE>
          <HARDWARE>850</HARDWARE>
          <SERVICES>2000</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2007</YEAR>
          <SOFTWARE>1000</SOFTWARE>
          <HARDWARE>800</HARDWARE>
          <SERVICES>1100</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2008</YEAR>
          <SOFTWARE>900</SOFTWARE>
          <HARDWARE>1200</HARDWARE>
          <SERVICES>1500</SERVICES>
     </SALE>
</SALES>
The latest Template Builder makes this a cinch!
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Problems with iWeb publishing to MobileMe

Hi,
Did you have some problems since about four days on publishing with iWeb to MobileMe? In my case, when I publish my site - and I made just little changes - iWeb publish ALL the pages.
I early had this same problem, this spring, and it was a MobileMe problem; Apple just made a little update to the server and it was ok.
I'm using iWeb'09
Thanks

With a lot of media content have you considered other ways of adding movies or audio tracks that only require you uploading those file manually once and then linking to them. For movies this demo page has one possible method: Opening Item in a New, Precisely Sized Window. This demo page has 7 movies added that way. They don't load until the play button is selected. PhotoPresenter Animated Slideshow Themes
For audio you can use flash players or a flash jutebox. Roddy's site, iWeb for Musicians, has examples and how-to's for both. See the following pages: Music Players and the following 3 pages after it. See the Next Page button at the bottom.
I've got a couple of flash players on my demo page: Music Players.
There are many alternatives to having to load all the media each time you republish.
OT

Problem with scheduling ECMA Ver1.1 in build 4.1.3496.0 and build 4.1.3479.0

I tried using powershell, vbscript, and c# calls and everytime the ecma is called, the ma run step finishes and never goes to the next run step.
Basically it never returns a run status to whatever calls the schedule and just hangs.
I have several ecmas and 2 of them behave this way, the others are packaged ecmas.
All other schedulng with the fim ma,adma's and the packaged ecmas work fine..
Any ideas? Im running out of them a I have tried rebuilding the ma's.. building packages, rebuilding wmi.. doing a rollup udare and nothing works.. This also occurs in dev.Any help is appreciated.
Thanks
Joe Stepongzi - Identity Management Consultant ilmXframework.codeplex.com

Exports will work if no pending exports.
Hi Joe :) - long time!
The above seems to me to be a clue - is it possible something is being instantiated/connection opened/etc. in your IMAExtensibleCallExport.ExportEntry call that is not being cleaned up? Have you tried debugging, or looking closely at the process monitor
to see what is different between when there IS and ISN'T any pending exports? Perhaps you could temporarily modify ExportEntry to basically do nothing, or write to a file - anything but what it is doing now - and see if the problem persists.
Bob Bradley (FIMBob @
TheFIMTeam.com) ... now using FIM Event Broker for just-in-time delivery of FIM 2010 policy via the sync engine, and continuous compliance for FIM

P6 R8.3 Problems with BI Publisher, Team Member

Hi
I am setting up a demo server with P6 R8.3 EPPM. The process I have followed so far is:
Install Windows Server 2008 R2 SP1 on the box (2 x Quad Core Xeon, 16GB RAM, 2 x 300GB drives)
Install SQL Server 2005 and copy across our current demo R8.2 EPPM database
Install JDK 1.6.0_41 64 bit
Upgrade the database to R8.3
Create a new Middleware Repository for BIP
Do a "simple install" of 64bit BIP from the "generic" distro to create an instance of WebLogic 10.3 and BIP 11.0.0.6.0 within it
Install P6 R8.3 and configure it to deploy into the existing WebLogic instance
Copy the P6 Reports into BIP and set up BIP as per the docs
I had to use the db configuration tool to create (?overwrite) the old P6 Configuration data in the database as when using the web P6 Administrator it was telling me that no database was configured for administration, and I have then gone in to adjust the URL for the database and the link to BI Publisher.
The supported configurations document also says that a patch needs to be applied to WebLogic 11g and I have tried applying it but it seems to be ignoring it - an earlier build attempt using a 32 bit version of WebLogic installed separately from BIP did take the patch, so maybe there is a later version of WebLogic bundled with BIP?... In any case, I am not seeing the error the patch was released to fix.
As of now, I have a working P6 environment with all data carried over from the 8.2 environment. There are 2 odd things happening though, and I can't see any reason for them:
First, any user trying to access Team Member Web Services gets an error message at login saying they are configured to use Progress Reporter to update progress. This happens regardless of the Module Access settings for that user, it just doesn't seem to work any more. Is there more I have to do here?
Second, I can't get the reports tab in EPPM to work, and always get the error message saying that the user is not configured in BI Publisher. Just to be clear what I have done:
I followed the procedure in the docs for setting up P6 reports in BIP and have checked it numerous times.
BIP is using the BIP Security model with a local superuser
The JDBC connection to the P6 database works, and I can login as any of the users in BIP that I set up to match the P6 users, and execute reports within BIP and see results returned
Those P6 users have got Enterprise Reporting module access
I have bounced both P6 and BIP several times within WebLogic, and WebLogic is showing all the various subsystems are running OK (as is Enterprise Manager)
I have compared the setup of this version of BI and P6 to those in our working R8.2 system, and the only 2 differences I can see are
BI is 11.0.0.5.0 for R8.2 and 11.0.0.6.0 for R8.3
When I assigned the data model to the reports in R8.3, the icon for the report disappeared and now just displays as a black box with an x in - but it only did this for some reports (eg the Activity ones)
One thing I am not clear on is the format of the URL for the BI web services - some docs say it should end in ?WSDL, others don't (for the combination of BIP 11g and SQl Server). I have tried both forms without seeing any change in behaviour (Typing either form into a browser results in a response so the web services system is definitely alive).. I have also tried changing the path to the reports from "/P6Reports" (which it actually is) to "/P6REPORTS" (which works in our R8.2 system, even though that's not what the folder is named - its also /P6Reports), but again that doesn't make any difference. Finally, I have tried logging into BIP directly using the credentials saved in the configuration and they work fine.
I am completely stumped - can anyone offer any further things to try out?

Alex
I have finally had an answer from Oracle about the BI Publisher issue, which is due to the fact that I installed the WebLogic bundled inside the Oracle Business Intelligence media set which is 10.3.5, while P6 R8.3 requires 10.3.6
So for the products to share an instance of WebLogic that both can use, you have to install WebLogic first from its own media set and without creating any domains. Then you patch it as specified in the Supported Configurations document, then install BI Publisher using the "Software Only" option, deploy that into a new domain, and finally install/deploy P6 into its own domain.
I now can see the reports in P6, but running them within P6 is producing an error. The Team Member issue is still partly there - assigning Team Member access to a user who didn't previously have it seems to work, but those who had it in 8.2 still can't login as the system still thinks they are set up for Progress Reporter. We have also encountered a problem where the whole top half of the user interface - the main tabs and the menu in the top RH corner - all is grayed out and becomes inactive at various points. I have found this listed as a bug related to Java 7 in the client browser which is fixed in R8.3 SP1 so I am now going to try to install that across all the various components of the product and see what happens...

Problems with a Published PDF audio/video that runs out of synch

Hi,
I have a large (30minute) video, with a combination of audio, flash videos with and without embedded music, and screens.
I published the captivate project to PDF, and then ran it using Abode Reader X and Flashplayer 11.01.
It played fine.
However, I am getting feedback from various people that when they try and run the video, the initial embedded flv file (with music) starts off and then suddenly the entire PDF file goes wild displaying screens in 1 second intervals in no apparent pattern with the music from the embedded flv file still playing in the background, eventually the voice over starts but obviously out of synch as the slides still appear in these 1 second intervals.
I ran a few tests to see if this strange behaviour had anything to do with the Adobe Reader or Flash Player installed, but there seems to be no pattern.
I even upgraded one system to Adobe Reader X and Flashplayer 11 but still experienced this same problem.
Does anyone have any suggestions as to why this might be happening for some users and not for all? Or what other settings I might try looking at to solve the problem?
Thank you,
Tannis

We will need a lot more information about those Videos. This ARTICLE will give you ideas on the info that will be so very useful for us to help you.
This ARTICLE will give you some background on Video formats/CODEC's.
Good luck, and please let us know more about those files. A screen-cap of G-Spot would be very useful.
Hunt

Problem with Scheduler API

Hello Friends
I am trying this concept of Job Scheduler API of Netweaver for the first time . The problem that I am encountering is , after successfull deployment of my application DC , I cant see the job created by me in the job definations on server
I am laying down the approach that I took for the development of job : -
1) I created one EJB Module DC( sample_mdb_session ) and created one Message Driven bean
( JobBean ) and laid down the logic to be run on the execution of job
I have also included the scheduler api in the build path of my DC
2) nextly I created the required job-definition.xml and did the changes in ejb-j2ee.xml
ejb-j2ee.xml
<enterprise-beans>
<enterprise-bean>
<ejb-name>com.sap.scheduler.examples.session.JobBean</ejb-name>
<jndi-name>JobBean</jndi-name>
<resource-ref>
<res-ref-name>JobQueueFactory</res-ref-name>
</resource-ref>
<message-destination-ref>
<message-destination-ref-name>JobQueue</message-destination-ref-name>
<jndi-name>JobQueue</jndi-name>
</message-destination-ref>
</enterprise-bean>
</enterprise-beans>
job-definitons.xml
<job-definitions>
<job-definition name="JobBean"
description="Logs a string and calculates its length">
<job-definition-parameter name="UserName"
data-type="String"
direction="IN"/>
<job-definition-parameter name="NameLength"
data-type="Integer"
direction="OUT"/>
</job-definition>
</job-definitions>
3) In the application DC( sample_application_dc ) I did the required changes in application-j2ee-engine.xml
<application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type= "service">
scheduler~runtime
</reference-target>
</reference>
<modules-additional>
<module>
<entry-name>demo.sap.com~sample_mdb_session.jar</entry-name>
<container-type>scheduler~container</container-type>
</module>
</modules-additional>
</application-j2ee-engine>
The document that i had reffered to construct everything was actually dealing with an EJB project and a respective .ear project, things were working fine till the time I was dealing with local EJB projects but as soon as I started working with DCs , the problems occured
And when i deployed the application on the server it is deployed successfully , but I cant see the job in job definitions in SAP Netweaver Administrator > java scheduler section
What i am doubting is that the changes that i did in the xmls are not apt , so If any one on the forum has done the scheduling job earlier can please send the required xml code as that may help in solving the problem

hi,
i hope u follow this [lin k|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90a95132-8785-2b10-bda5-90d82a76431e]
and the architecture and sample application [this |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e8ab5056-0e01-0010-5581-d3e51724ee21]
thanks and regards
bvr

Problem with "lbl.publish" transition when skip approval programmatically

Hi all ...
I am currently trying to "Skip Approval" programmatically by executing the "lbl.publish" transition, like this in a KM repository service:
IRepositoryServiceFactory repositoryServiceFactory =
   ResourceFactory.getInstance().getServiceFactory();
IStatemanagementManager statemanagementManager =
    (IStatemanagementManager) repositoryServiceFactory.getRepositoryService(resource, IWcmConst.STATEMANAGEMENT_SERVICE);
IStatemanagementResource sResource =
     statemanagementManager.getStatemangementResource(resource);
IResourceTransition resourceTransition =
     sResource.getTransition("lbl.publish");
if (resourceTransition != null)
    resourceTransition.execute();
But this do not work, and instead raise this ExecMessage: <b>"You are not allowed to carry out this action"</b>
Please Help
Best regards
Jonathan

Thank you Ankur...
Your tip solved my problem; I already reward you with 10 points!!
Best Regards
Jonathan.

Problem with scheduled publishing

Similar Messages

Maybe you are looking for