Problem with showing battery and system information in openbox

I wanted to install docks( in open box wm ) which give me battery life information and some thing like that but when I run them terminal give me this error :
CPU frequency scaling NOT available
No power management subsystem detected
No power management support...
what should I do
Last edited by sarsanaee (2013-08-08 15:14:42)

well.. dockapps are veery old fashioned way to do that. If you look at wmpower app on that site you see it hasn't been updated for nearly five years, so i'm not surprised if it's not working on a modern system.
many people use conky to display power status on openbox, so you might want to look into that..
you can add power applet to various panels (xfce-panel, gnome-panel etc.) and use the panel with your openbox session
you could also code/google for openbox pipe menu script that does what you need
if none of those options work for you i found this git repository that seems to be still maintaied that holds wmpower and some other dockapps: http://repo.or.cz/w/dockapps.git
unfortunately couldn't find PKGBUILD for that on AUR...
Last edited by ooo (2013-08-09 11:25:56)

Similar Messages

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

Since your iPhone is still under the one year warranty contact Apple Support or visit an Apple store to get a replacement.
Apple Support - http://support.apple.com/kb/HE57

I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
I am sorry for the confusion.
Regards
Rajshree

I have a second generation shuffle and even though (after charging ) the green battery light is on - soon after it turns orange and then red. Is there a problem with the battery and is it fixable?

I have a second generation shuffle and even though (after charging) the green battery light is on it soon turns orange and red. Is there a problem with the battery and if so is it fixable?

If it's a 2nd gen shuffle, it is probably about six years old at this point. The cause is likely to be a worn out battery that is no longer able to hold its charge for very long.
It is technically fixable. This web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle
But it is very small, so you need to be good at doing such things. The cost to have a repair shop do the work is likely to be uneconomical, compared to the cost of a brand new 4th gen shuffle ($50), which has more features (and possibly double the storage) plus a one-year warranty.

IDVD problem with "Show title and comments"

I am making a DVD for a neighbor. He has given me CDs with scanned old slides. He has over 1000 photos.
I've got the DVD made in iDVD and everything is fine except in one of the slideshows.
In iPhoto I have 22 albums of photos. When I'm in iDVD I go to "media" and I drag an album into the theme. After it is there I drag another album into that album I just drug. So what I'm doing is combining 2 albums into one slideshow thus having 11 slideshows in my theme. I then go into each slideshow while in iDVD and add music and go to "settings" and unclick "Show title and comments".
After I have completed this for all slideshows I watch each slideshow before burning and everything looks fine. After the DVD burns (which takes 5 hours) I again watch the DVD on my television. In the first slideshow, and only the first slideshow, the first half is fine and then when it comes to the pictures that were in the second iPhoto album that I drug in the titles of each photo are coming up on the screen. All of the other 10 slideshows that I combined are just fine.
I pitched the first DVD and tried to fix this by going into iPhoto and making a separate album that had all the pictures of thos first two initial albums. I then went into iDVD, deleted that problem slideshow and then added the slideshow that I had combined all the photos into that one album. I again make adjustment adding music and going into "settings" and unclick "Show title and comments". I watch the slideshow while in iDVD and everything looks fine.
I burn another DVD and when I watch it on my television again that first slideshow has the first half of the pictures just fine and then the second half are showing the titles of each photo on the screen.
Everything else in the DVD looks fine.
The only other thing that might be of importance is when the DVD is ejected from the burner the screen says:
"Current Operation"
"Image Incomplete"
I click Cancel and then it says:
"Cleaning Up"
"Image Incomplete"
I again click Cancel.
At this point iDVD freezes and I have to go up under the Apple symbol and do a Force Quit.
Does anyone have any suggestions? I know I should try to make 2 DVDs out of all these photos instead of 1 but my neighbor was really hoping he could have all of them on 1.
Thanks in advance for any and all help.

Just drag them from the iPhoto Trash bin onto the Library icon just above it.
OT

Problem with show data of system R/3

Hi all,
I have a proyect with web dynpro, and i like get data of system R/3. I get this data with the connection JCO.
I have make all steps for crate the web dynpro and i see the application when deploy and run, but data of system R/3 i not see.
I have created a connection with Jco in Web dynpro Administrator and the test is good.
How can i make for get the data in the table of webdynpro?
Thanks in advance.
Vicente Zaragoza.

Hi,
You mentioned that there is no problem with JCO connection, if it is so then you should check the mapping of attributes to to UI elements (Usually you will map Model(BAPI) to coustom controller and coustom controllet to View Check are you mapping attributes, then In view you should map UI elements to attriburtes(Value attributr/value node depending on the context).
And check in coustom controller's source code you are excuting a function module (Method to call function module /BAPI) and in WDINit method creat function module object similar to below mentioned code
Bapi_Persdata_Getdetailedlist_Input bapiInput = new Bapi_Persdata_Getdetailedlist_Input();
wdContext.nodeBapi_Persdata_Getdetailedlist_Input().bind(bapiInput);
in view invoke this method
for a specific tutorial follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web dynpro tutorial and sample applications.faq
How to access R/3 Backend in Web Dynpro?
Hope your problem solved
Regards,
RK

Problem with purge temp and system tablespace

hi,
i am purging tablespec with sys user and it seems doing it, but tablespaces are still full
also wanted to drop a datafile
alter tablespace system drop
datafile 'C:\oraclexe\files\sys.bf'
and it giving the following error
Error starting at line 28 in command:
alter database datafile 'C:\oraclexe\files\sys.bf' offline drop
Error report:
SQL Error: ORA-01541: system tablespace cannot be brought offline; shut down if necessary
01541. 00000 - "system tablespace cannot be brought offline; shut down if necessary"
*Cause: Tried to bring system tablespace offline
*Action: Shutdown if necessary to do recovery
but if i shutdown how i drop it? or delete manually the file?
sorry for the 2 question in one thread
thanks

but if i shutdown how i drop it? or delete manually the file?Operate in MOUNT state.
But If you need to resize your system tablespace, You have to check HWM.
On XE, I think it's easy to use full exp -> recreate -> full imp..
Regards,

Problems with user SYS and SYSTEM

Hi,
I installed 9i on the Linux Suse 7.2, it's runing OK. But when I try to connect with user SYSTEM or SYS as SYSDBA/SYSOPER I receive message "ORA-01031: Insufficient Privileges".
Please, what do I get this privileges SYSDBA AND SYSOPER?
Anyone have any ideas?
Thanks.

Check the to see if the user is a member of the dba group.
The O/S user you are using needs to be a member of the dba group in /etc/group.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

Problem with showing caller information on E90

I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
Regards,
-mats-

unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.

What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

I buy an iphone 4s sience 6 months ago and i have problems with the battery what can i do ???

i have problems with the battery of my iphone4s i have it sience february 17 of this year and i the time life of my battery i compare the lifetime of the battery of my iphone 4 with the iphone 4s and i look that the iphone 4 has long a long lifeime i can use it like 2 days without charge and whit my iphone 4s like only 12 hrs what can i do?? i have the guarrantie help me =)

Contact Apple Support. Here's how:
http://support.apple.com/kb/HE57

Problem with showing battery and system information in openbox

Similar Messages

Maybe you are looking for