Problem with slp & smdr services after SP8

I posted this in the cluster services forum, didn't get a response, guess i had the wrong forum.
We use Arcserve Brighstor 11.1 SP3 loaded on a non-cluster server. Job is setup to backup all cluster vols running on the two cluster nodes. Arcserve backup logs has "E0182 Error setting connection No conn-ffffffff. Ret=ffffffff unknown file server version 0" - and it doesnt backup the cluster volumes loaded on node 2.
*When do display slpda on all servers, da is displayed and active.
*When do display slp services smdr.novell, it does not see cluster node 2 or the cluster volumes loaded on node 2, so arcserve will not back them up.
I migrated vols from node 2 to node 1 and slp services smdr.novell displays all cltr vols and all servers and backs them up (except node 2).
*I've done the load smdr new command on node 2 and the slp.cfg file has the host, ip & sap protocol enabled.
*slp.cfg files on all servers have the da IP address.
*Ive run disrepair, all servers are in sync
*Ive rebooted servers.
*I called Arcserve, and there is no problem with arcserve.
Configuration has not changed. It started happening a couple of weeks after upgrading to SP8. However, right after upgrading to SP8 it must have been workin ok because backups were good.
Please advice where I should look to find and solve problem. What do i need to do to node 2?
Thank you.

on node 2, is cluster enabled for tsafs? You can look at sys:etc/sms/tsa.cfg and see if "cluster" is enabled. If not, enable it with:
unload tsafs
load tsafs /cluster
Hope this helps...
Oza
>>> On 6/3/2010 at 06:56 AM, in message
<[email protected]>,
robles<[email protected]> wrote:
> I posted this in the cluster services forum, didn't get a response,
> guess i had the wrong forum.
>
> We use Arcserve Brighstor 11.1 SP3 loaded on a non-cluster server. Job
> is setup to backup all cluster vols running on the two cluster nodes.
> Arcserve backup logs has "E0182 Error setting connection No
> conn-ffffffff. Ret=ffffffff unknown file server version 0" - and it
> doesn’t backup the cluster volumes loaded on node 2.
>
> *When do display slpda on all servers, da is displayed and active.
> *When do display slp services smdr.novell, it does not see cluster node
> 2 or the cluster volumes loaded on node 2, so arcserve will not back
> them up.
>
> I migrated vols from node 2 to node 1 and slp services smdr.novell
> displays all cltr vols and all servers and backs them up (except node
> 2).
>
> *I've done the load smdr new command on node 2 and the slp.cfg file has
> the host, ip & sap protocol enabled.
> *slp.cfg files on all servers have the da IP address.
> *I’ve run disrepair, all servers are in sync
> *I’ve rebooted servers.
> *I called Arcserve, and there is no problem with arcserve.
>
> Configuration has not changed. It started happening a couple of weeks
> after upgrading to SP8. However, right after upgrading to SP8 it must
> have been workin ok because backups were good.
>
> Please advice where I should look to find and solve problem. What do i
> need to do to node 2?
>
> Thank you.

Similar Messages

  • I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

    If you are dissatisfied with the Service you have received and wish to Contact Apple...
    India
    Start your support request online and we'll connect you to an expert.
    (91) 1800 4250 744
    www.apple.com/in/support/
    From the above Link...
    To Contact Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • After upgrading to firefox 3.6 I have problem with hotmail email service

    after upgrading to firefox 3.6.4 I have problem with hotmail email service, however I can login in hotmail, I can't open mails or delet or do anything else with them.
    == URL of affected sites ==
    http://hotmail.msn.com

    Thank you, but I already have "always show tabs bar" set.
    Also, I have two computers and the other is running the exact same version of Firefox, and the exact same theme, but it does not have this problem.
    To make sure I'm being clear: there is an "x" on each tab that allows me to close it when I have multiple tabs open. When I have only one tab open, there is no "x"; so in order to close the webpage I have to open another empty tab, and then close the first. My other computer has the "x" to close the tab visible even when there is only one tab so that I can close the page and have an empty (marked "(untitled)" tab). Please help!

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Problem with flash on IE11 after using adobe cleaner

    Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
    Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

    I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Problem with reversal of Service entry Sheet

    Hi All,
    I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
    Please help in this regard
    Thanks & Regards
    Nisha Prasad

    Hi,
    The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
    Thanks
    Nisha

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • Problem with RESTful web service

    I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
    Accept: */*;
    rather than
    Accept: application/xml
    when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
        // Constructor
        public function _Super_UsersService()
            // initialize service control
            _serviceControl = new mx.rpc.http.HTTPMultiService();
             var operations:Array = new Array();
             var operation:mx.rpc.http.Operation;
             var argsArray:Array;
             operation = new mx.rpc.http.Operation(null, "getUsers");
             operation.url = "http://localhost:8888/users";
             operation.contentType = "";
             operation.method = "GET";
             operation.resultFormat = "xml";
             //operation.serializationFilter = serializer0;
             operation.properties = new Object();
             operation.properties["xPath"] = "/";
             operation.resultType = valueObjects.Users;
             operations.push(operation);
             _serviceControl.operationList = operations; 
             model_internal::initialize();
    How does one configure the accept header?

    Hi,
    I have posted a simple application with the RESTful reference:
    http://apex.oracle.com/pls/apex/f?p=13758
    I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
    It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
    This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
    I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
    This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
    class="statusMessage">Bad Request</span>                                         
    </h3>                                         
    </div>                                         
    </div>                                         
    <div id="xWhiteContentContainer" class="xContentWide">                                         
    <div class="xWhiteContent">                                         
    <div class="errorPage">                                         
    <p>                                         
    <ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>                                    
    </ul>Thanks,
    Pat
    Edited by: patfmnd on May 8, 2013 3:33 AM

  • Solutions for problems with QuickTime files in After Effects CC (12.0)

    We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components. 
    Please read that post and let us know here on this forum thread if you have any questions or comments. 
    Also, please let us know if the proposed solution works for you.

    Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
    Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
    The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                                     0x04981f90 0 + 77078416
    1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
    2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
    If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

Maybe you are looking for