Problem with sound and network card

when my mainboard broke down i received other mainboard - 845PE Max - but i didn't get drives to it. Sometimes sound screeched but it worked fine till I reinstall windows. I had to download drives by Live Update, and after i downloaded it all sound screeched allmost every time, especially when i do something (click, close window etc.). It looks that sound work worse when processor is more busy. I tried to reinstall drives, but i didn't change anything. I have 2.1 speaker system, and it worked fine at old mainboard. I have win XP professional SP2, and it doesn't see any problem, and onboard realtek sound. Anyone know what can be a reason??

I did get some disturbing backround noise after updating latest audiodriver for my 865pe v.1 board (C-Media 9739A) ,from Live update.
Tried some different settings, but did not solve the problem, so I installed my
Creative SB Live 5.1 pci-card with latest drivers, instead of going back to old driver - and now I´m happy again and got better sound as well in my 2.1 speakers.
Try to find an older driver and see if problem go away ( pitty you don´t have the original MB CD drivers ) or buy a “cheap” audio pci-card, which probably will give better sound as well compared to on-board.
( you may have to disable on board sound in bios first )

Similar Messages

Homehub 3 problems with wifi and network - please ...

I am hoping someone can help me, as I am struggling to work out why I am getting so many problems with my network at home.
I have BT Infinity, and a Homehub 3A. I have had BT broadband for years. Infinity was added in Feb 2013. The HH3A is the original one supplied to me years ago.
When Infinity was installed I also added a pair of TP Link powerline adapters, to provide a connection to an unmanaged network switch in the lounge.
A rough outline of what I have connected to the router is:
Wired
- Synology NAS Diskstation
- Win7 laptop
- powerline adapter
Wifi
- 3 iphones
- 2 ipads
- Win7 laptop
- 2 Win Vista laptops
Powerline / network switch
- Sonos bridge
- TV
- BluRay
- Vodafone booster
- SkyHD
Recently I am getting a number of different problems:
1) wifi drops to everything connected to the router, at the same time, all blue lights are on the router
I lose wifi connection to the internet, from all devices, at the same time, but also the connection from my laptop to the NAS drops.
2) Anything connected to the Powerline adapter is rarely available
I try and connect to Sonos, or my sky box or the TV, but they aren't connected to the router. The lights on the powerline adapters indicate everything is fine, and the HH3 has all blue lights. But my iphone and laptop cannot find my Sonos. My iphone app cannot find my sky box. And on the TV it says it is not connected to the internet. To solve this problem I have to power cycle the pair of Powerline adapters.
Some observations:
1) these problems are all since Infinity was installed. I have no idea if that is relevant.
2) My NAS Diskstation has a powersave mode. I noticed last night that when I woke it up, the powerline adapters disconnected briefly, before reconnecting. But when they did reconnect I could not access anything connected to them. It was as if the NAS had booted them off the network, and then they couldn't get back on.
3) I run a 10m brand new Cat5e cable from the infinity modem to my router, because the modem is in the garage.
Can anyone help? I am tearing my hair out with this.
Thanks for any help.

If you set the devices on the home hub to always use the same IP address, then that can help.
The problem is that when the DHCP lease expires, the home hub often gives the device a different IP address, and this breaks the port forwarding rules.
Some routers allow you to specify which IP addresses are to be reserved, but the home hub does not.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Xfce4: Problems with Sound and Screen Locking on ASUS G53S

Hello everyone,
I recently installed Arch for the first time, and decided to use xfce4 for my desktop environment. Everything seems to work well after I followed the instructions given in the wiki, except for the sound and screen-locking functionality. Regarding the sound, I made sure that my user account is added to the audio group, and installed the gstreamer1.0-base-plugins and gstreamer1.0-good-plugins packages. The xfce4-mixer applet starts up without any warnings and recognizes the available devices, but I am still not able to hear any sound. The "Lock Screen" applet simply does nothing upon being clicked. Do you have any ideas as to what I should try in order to fix these problems?
Thank you very much!

To be able to lock the screen you have to install and configure a screen locker or screen saver, e.g. xscreensaver, slock, i3lock, maybe combined with xautolock. When you use a screen locker and not xscreensaver, XFCE might not recognize it. Then create a symlink in /usr/local/bin/xflock4 or use a shellscript if you need to pass parameters.
My configuration: xautolock with i3lock. /usr/local/bin/xflock4 is this executable shellscript:
#!/bin/sh
xautolock -locknow
xautolock is started in the XFCE autostart with this commandline: xautolock -locker 'i3lock -d -i ~/Bilder/arch/arch-linux-lock.png'
PS: If you like i3lock and need user switching capabilities, I can give you a patch where Ctrl-S calls a custom command (gdmflexiserver by default)
Last edited by progandy (2012-06-17 14:19:12)

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problems with sound and mics.

Ok here goes. I have a HP envy dv7, windows 8, internet 10. Since day one I have sound issues when trying to skype. Sounds minor to some, BUT this is a large issue to me.
I have sent this unit back for reapirs twice and still have the issue. HP says call skype, skype said call HP, HP says call microsoft.
I have tried using our old computer and I can skype my grandchildren just find, however when I use the new computer, after a bit I get huge feedback and they can't understand what we are saying. A friend testing it says it sounds like we are talking through a tin can!!!
We have set up both computers and skyped each other in the same house and have the same issue, therefore I don't believe it is the internet, or my sons computer. I believe it it my new computer that no one will fix or replace. I am at a loss and just saw this form and wondered if perhaps someone here could offer some advice.
Thanks in advance for any and all suggestions. I truly believe I have a defective product, but HP will not agree with me, and just want to keep sending it back for the same repair over and over, taking 2-3 weeks at a time.
Debbie Peloquin

Hi Debbie,
I suggest calling back and speaking to HP.
If you live in the US, contact HP Here.
If you are in another part of the world, begin Here.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

N8 Problems with Maps and "Network connection requ...

I started with German O2 as my provider.
So at /Settings/Connectivity/Settings/Destination I found O2 MMS for "WAP services" an O2 Internet for "Internet".
Now I changed my provider and probably deleted both "Access point" Items.
When I'm starting OVI Maps I'll be always asked:
"Network connection required. Define access point to connect?"
And I can choose between:
O2 MMS (already deleted)
and web'n'walk (from t-mobile)
Why I can choose something, I already deleted it?
BTW: Problem exist from first version 011.012 till 013.016

Damn, just tried to post with IE9 but the forum doesn't seem to work on IE9 (final). So this time with Firefox...
@aspergerguy:
I tried both of these settings, non worked in my home network.
Sill I got a solution that works for me altough not everybody will be hapy with it:
I did a soft reset and now the A-GPS works fine again. I did that because i remembered that the problem appeared after I sent my self a config SMS from my service provider with the internet access settings. That somehow messed it up. Still I can't find a difference in the settings for A-GPS, but that doesn't matter to much to me now that it works
Getting all settings right again didn't take as long as finding the error...
The thing that would be nice to get working is push mail on OVI. But that seems to be a longer story

ITunes problems with sound and video

So like, everyone else reading this right now, i Just got iTunes new version, exciting isn't it. Let's see. The color of the words is now black, instead of the blue. When a song is played it plays, but it sounds like a radio with really bad static. The files on the computer did not change to the new blue music note, maybe that has bothing to do with anything. Then the videos flash a weird plaid green and then go black everytime one is started, paused, resized, etc. I Also seem to be missing 3/4 of my podcasts from the video section. I am afraid to attatch my iPod for fear of getting the same static, no videoy results, so we'll save that for later. I am currently on my 4th iTunes version 7. Here's soem random information. Diagnostics Check on iTunes.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
INTEL_ D865GBF_
iTunes 7.0.0.70
Current user is an administrator.
Network Adapter Information
Adapter Name: {DC927C43-3CDB-4DF9-BA76-04389C28FF03}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.0.7
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Wed Sep 13 21:06:14 2006
Lease Expires: Thu Sep 14 21:06:14 2006
DNS Servers: 192.168.0.1
216.150.192.37
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
I got the new quick time from the download.
I'm not sure how to put a picture on this after it's been copied from the screen, but i can do that if someone can help me.

Adding to further on that, the sound works fien if the volume on iTunes, is all the way up.

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

Problems with sound and music

I got an Apple TV and I connected to my Samsung TV with HDMI. It works fine, I sync with my MacBook Pro and I can see my pics and get some music from my iTunes library. But I can't play the songs. I select them but when I press play it doesn't work. And also there is no sound when I connect to Youtube for example.

Winston Churchill wrote:
Have you got the volume control turned down. Look in your video and audio settings, enable volume control and check if you are able to turn the volume up with the remote.
that wouldn't explain the no volume with youtube though? as that setting only affects music playback ?

I have problems with mail and network connection?

I am having problems connecting my Ipad to my network it always has the message I am not connected to the internet whenever I open safari. I have an existing account and succesfully synched itunes already....

Which browser & version are you using?
Since I down loaded Yosemite
Your profile is showing "iMac, Mac OS X (10.7.5). "
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Problems with sound and safari slowness

installed mavericks on a macbook pro from 2011, 2.5 GHz and 4GB RAM
the sound icon on the top menu bar is light grey, won't open in system preferences (spinning beach ball of death...)
safari takes FOREVER to load new pages, especially outlook, and new tabs...
anybody else having issues or have solutions?

For the sound issue ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.systemuiserver.plist
Click Go then move the com.apple.systemuiserver.plist file to the Trash.
Restart your Mac. See if the sound icon is bold in the status menu bar and try System Preferences > Sound
As for Safari, try troubleshooting Safari extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Having problems with RT and video card?

I have just upgraded to FCP 5 Studio. I found that my video card was not able to handle the RT Extreme, so I upgraded to a recommended ATI 9600 64 mb video card. However I still do not get any video that plays in the viewer windows. I only get a pixelated screen of the menu bar. I am running two monitors. The second monitor is only 32 mb,but I only use it for the menus part of the program. Do both video cards need to have enough memory to run the video RT? If so, can I unplug the monitor that does not have enough memory and run the program properly? Can I turn off the RT feature? Thanks for your help.

This is the Final Cut Express forum. You should post your question in the Final Cut Pro forum and/or the PowerMac forum.
wrt RT settings in FCE, you can adjust them in FCE System Settings > Playback Control

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Extreme Music - Problems with Driver and Installation

Hi guys,
?After the my computer has given up it's life on the last friday, I bought a new one and wanted yesterday to install everything like OS, driver and so on.
I started the install of the driver(which is the version from the creative website , released in july 2009) for my soundcard, the X-FI Extreme Music and when the information was given, that the Windows drivers will be updated and it will take some minutes, something happend:
At my first try a bluescreen appered. You can imagine, that I was shocked to see a bluescreen on my new pc after an hour.
I run CCleaner to remove some rests of the "maybe installed" driver and started it again. There was no bluescreen, but the mouse freezes and the setup does nothing anymore. I can close it with may keyboard, but the driver wasn't installed.
After a new clean up with CCleaner I tried it again. I put out my cable of the mouse , so maybe this was the problem(ofc, WHY is there a problem with USB and PCI Cards ?). The installations works, no hang up or freezes. After a restart nothing happend. No sound. I looked at the hardware manager(do not know, whether it is the correct word, I'm german and have a german windows ) of windows and at audio, video and gamecontroller, there is a warning of not working driver.
I remember, that on my old system the driver was titled something like
X-FI Audio[800] or something like that.
But here it was named with?
X-FI Processor WDM
I thing the system is installing the wrong driver.
I looked at some forums , find the hint to change the PCI slot. I did it, but nothing changed.
So, here are some information of my system configuration, maybe someone can help.
Old system(where the soundcard works fine with no problems):
- Athlon X2 4200+(socket was the "old" 939)
- Asus A8N-E
- DDR 400 RAM, 2GB
- Windows XP Professional(32 Bit) with SP3
New System:
- Phenom II X4 80(quadcore)
- Gigabyte MA790XT-UD4P
- DDR3 333 RAM , 4GB
- same OS as used in the old configuration
Ofc all chipdriver were installed and seems to work fine.
The onboard soundchip is disabled too.
Hope for help ^^
Mel
Message Edited by Meldanor on 08--2009 2:20 [email protected]

Hi guys,
I'm very sry for the wasted bytes and bits in this forum, but my problem was solved some minuetes after this post >.< .
I tried once again to install the driver and everything is working ... until yet, but only the future will show me, whether it will work or not ^^
What I've done? Just a restart after the post.

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

Problem with sound and network card

Similar Messages

Maybe you are looking for