Problem with SQL Listener Name

I installed SQL 2012 with Always on. It has 3 nodes.
Here is the detail information about the server:-
Server Name
Failover Mode
SQL Listener Name
Node 1
Automatic
ABCD
Node 2
Automatic
ABCD
Node 3
Manual
ABCD
It seems application is having problem to connect the DB server with listener name; but application can connect the DB server with server name (i.e. Node 1/2/3). Do you know what would be the reason?
I also noticed when I tried to connect DB server through SSMS (by using SQL Listener name) it is taking too much time. I have to increase “connection time-out” to 60 sec otherwise it is throwing timeout error. But if I use server
name then it is not throwing timeout error. I am not sure why it is taking more time to connect DB by using SQL Listener name. Any Idea?

Hi XYZ001,
As other post, please help to post more details for analysis.
Do you configure AlwaysOn Availability Group in a multi-subnet environment? If that is the case, please check the following things.
1. Make sure that you add the MultiSubnetFailover parameter and set it to true in the Additional Connection Parameters tab when connecting to DB server through SSMS by using Listener name. If you forget to pass in the MultiSubnetFailover parameter, it will
allow for a successful but delayed connection even if you increase “connection time-out”. For more details, please review this
blog.
2. When the application is unable to connect the DB server with listener name, the issue could occur when your application either uses a legacy data provider that does not support the new MultiSubnetFailover parameter, or is not configured to use this parameter.
Please use the following resolutions as applicable to your case, for more details, please review this
article.
•To resolve this situation when the data providers support the MultiSubNetFailover parameter, add the MultiSubNetFailover parameter to your connection string, and set it to true.
•To resolve this situation when your legacy clients cannot use the MultiSubnetFailover property, you can change the listener’s RegisterAllProvidersIP value to 0.
3. If you have an active Transport Driver Interface (TDI) filter driver that is installed on the client application workstation, you may also get timeout error. For more details, please review this
KB article.
There is also a similar thread for your reference.
http://stackoverflow.com/questions/23416492/connection-timeouts-when-using-multisubnetfailover-true
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Similar Messages

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Problem with Connection Broker name

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM
The services needed to be restarted, now im facing another problem with the new name:
error: "Remote Desktop can't connect to the remote computer "NewBrokerName.domain.com" for one of these reasons:
1) Your user account is not listed in the RD Gateway's permission list.
2) You might have specified the remote computer in NetBIOS format ( for example, computer1), but the RD Gateway"
EDIT: Also solved this error RD Gateway was only allowing connections to Domain Computers, change to all resources

Problem with SQL connection and a Collection

hi all,
I have two problems with sql...
1. how can I assign the values of a resultset to a collection?
2. how can I close the sql connection, because when I close the statement and connection error shows me in the resultset
thanks!

Hello Pablo,
RetrivingResults In Collection:
1)   use getObject method, and assign it to collection.
          Collection c_obj=new ArrayList();
         while(rs.next())
                c_obj.add(rs.getInt(Project_ID), rs.getString(Project_Name));
Closing ResultSet
2)               The close() methos of ResultSet closes the ResultSet object, like bellow
                ResultSet rs = stmt.executeQuery("SELECT a, b FROM TABLE2");
                rs.close(); //Closes the result set

Problems with song's names in iTunes Store

So, I have a problem with song's names in iTunes Store on my iPhone 6+ 128. with 8.2
You can see it on attached screens.
I tried to change the font size and erase the phone and then install it again by default. The problem manifests itself on 6+ and didn't on my iPad with the same program version.

That's really curious. Sorry I don't have anything else by way of potential solutions to offer, but it may be worth contacting Apple about this one.
http://www.apple.com/support/contact/

Problem with Sql Server

Hi All,
While i am trying to connect to sql server through an applet it is giving an error in the java console
Ie SQLException: Connection refused :connect
i also tried with standlone application it is working fine then would be the problem with applet
Here is my driver
Class.forName("com.inet.tds.TdsDriver").newInstance();
DriverManager.getConnection("jdbc:inetdae7:SERVER:1433?database=abc","gin","gin");
How can i resolve this issue.
Thx & Rgds
Vin

Check the permissions for your applet. Anuntrusted
applet(which it is by default) is not allowed toopen
network connections. That might be the cause. Butthen
you should get a SecurityException and not a
Connection Failed exception. Couls you pleasedescribe
the exception that you are getting.
Cheers
JaySome times it is giving access denied i.e.
java.net.SocketPermission error in java console
Try giving full permissions to your applet. There is a
exe file in the bin dir of the jdk installation which
does that(I forgot the name)
Here is the exact error msg which is displaying in java console
SQLException:access denied(Java.net.SocketPermission 127.0.0.1:1433 connect)
-vin

Problems with dbms_aq.listen

I am having problem trying to listen to a set of queues.
I have tried it with Single Consumer queues and it works fine.
But with Multi Consumer queues dbms_aq.listen does not detect a new message enqueued and just waits until the time out then returns with the normal "No message" exception.
Can any one tell me what I am doing wrong?
Thanks
Rick Laird
code
CREATE OR REPLACE TYPE message_type AS OBJECT (xml_message CLOB);
exec dbms_aqadm.create_queue_table('testqueue_qtable','message_type',Null,Null,true);
exec dbms_aqadm.create_queue('testqueue', 'testqueue_qtable');
exec dbms_aqadm.start_queue('testqueue');
exec dbms_aqadm.add_subscriber('testqueue',sys.aq$_agent('testqueue_subscriber',NULL,NULL));
exec DBMS_AQADM.SCHEDULE_PROPAGATION('testqueue');
CREATE OR REPLACE PROCEDURE MONITOR_STATUS_QUEUE(time IN NUMBER)
IS
pragma autonomous_transaction;
agent_w_message sys.aq$_agent;
agent_list dbms_aq.aq$_agent_list_t;
wait_time INTEGER := 10;
no_message EXCEPTION;
pragma EXCEPTION_INIT(no_message, -25254);
new_status VARCHAR2(30);
monitor BOOLEAN := TRUE;
begin_time number;
end_time number;
v_dequeue_options dbms_aq.dequeue_options_t;
v_message_properties dbms_aq.message_properties_t;
v_message_type message_type;
v_dequeue_msg_id RAW(40);
v_xml_message CLOB;
v_message_text varchar2(2000);
v_amount number;
BEGIN
begin_time := dbms_utility.get_time;
WHILE (monitor)
LOOP
BEGIN
-- agent_list(1) := sys.aq$_agent('testqueue_agent', 'testqueue', NULL);
agent_list(1) := sys.aq$_agent('agent1', 'testqueue', NULL);
/* wait for order status messages */
dbms_aq.listen(agent_list, 0, agent_w_message);
dbms_output.put_line('Agent' || agent_w_message.name || ' Address '|| agent_w_message.address);
/* dequeue the message from the queue */
v_dequeue_options.consumer_name := 'testqueue_subscriber';
v_dequeue_options.wait := 0.5;
-- v_dequeue_options.wait := dbms_aq.NO_WAIT;
dbms_aq.dequeue('testqueue',v_dequeue_options, v_message_properties,
v_message_type,v_dequeue_msg_id);
v_amount := dbms_lob.getlength(v_message_type.xml_message);
dbms_lob.read(v_message_type.xml_message,v_amount,1,v_message_text);
dbms_output.put_line('New Message :'||v_message_text);
/* exit if we have been working long enough */
end_time := dbms_utility.get_time;
IF (end_time - begin_time > time) THEN
EXIT;
END IF;
EXCEPTION
WHEN no_message THEN
dbms_output.put_line('No messages so far');
end_time := dbms_utility.get_time;
--exit if we have done enough work
IF (end_time - begin_time > time) THEN
EXIT;
END IF;
END;
END LOOP;
commit;
END;
create or replace procedure enqueue is
v_enqueue_options dbms_aq.enqueue_options_t;
v_messages_properties dbms_aq.message_properties_t;
v_message_type message_type;
v_message_locator CLOB;
v_enqueue_msg_id RAW(40);
v_select_sql varchar2(2000);
v_xml_message varchar2(2000);
v_temp_clob CLOB;
begin
v_xml_message := '<TESTING><TEST>'||to_char(sysdate,'HH:MI:SS')||'</TEST></TESTING>';
dbms_lob.createtemporary(v_temp_clob,true);
dbms_lob.write(v_temp_clob,length(v_xml_message),1,v_xml_message);
v_message_type := message_type(empty_clob());
dbms_aq.enqueue(
queue_name => 'testqueue',
enqueue_options => v_enqueue_options,
message_properties => v_messages_properties,
payload => v_message_type,
msgid => v_enqueue_msg_id);
v_select_sql := ' select t.user_data.xml_message from testqueue_qtable t where t.msgid = :MSG_ID';
execute immediate v_select_sql INTO v_message_locator using v_enqueue_msg_id;
dbms_lob.copy( dest_lob => v_message_locator,
src_lob => v_temp_clob,
amount => dbms_lob.getlength(v_temp_clob));
COMMIT;
end enqueue;

Hi,
Your subscriber is called testqueue_subscriber. You must use the same consumer name in the agent list for dbms_aq.listen
Change
agent_list(1) := sys.aq$_agent('agent1', 'testqueue', NULL);
to
agent_list(1) := sys.aq$_agent('testqueue_subscriber', 'testqueue', NULL);

Problem with SQL Exception SQL0913

Hello,
I am facing problem in my XI2JDBC scenario like,
SQLException during query 'Select * SRSYS from NSARECP
where srrecn = (select min (srrecn) from nsarecp where pdate =
'0001-01-01')':
java.sql.SQLException: [SQL0913] Row or object NSARECP in
NSALDTA type *FILE in use.
Can you please help me out.
Thanks,
soorya,

Hi,
It would be an error due to time out options so try to increase the polling time and also check whether are manually able to execute the query as it can even been locked because of polling the table with wrong user name and password.
Regards,
Nithiyanandam

Problem with SQL Query Action

Hi,
I have a problem in using transactions with SQL Querys.
I developed a TA based an SQL Querys against a MS SQL Server by using the jtds driver.
After execution of the sql query I iterate through the result data by using the repeater action on the xMII XML results of the query. Using the jtds driver all table and field names are in lower case letters.
Now I changed the data server to test it with oracle to an oracle database by using the oracle jdbc driver. The database and tables on both Oracle and MS are created with the same sql script.
The oracle driver returns table and field names in only capital letters. So the created transaction can not be used. Because it for example accesses the node "type" in the XML structure which is fine for jtds. But when oracle is used, the node has the name "TYPE", so the TA tries to use node type but there is only node TYPE that causes the TA to run into an error.
Anyone has an idea how to avoid / solve this problem?
Regards
Timo

That's exactly what I used as solution now.
Instead of doing
"select fieldname from tablename"
I do now
"select fieldname as "fieldname" from tablename"
So both in Oracle and Microsoft SQL Server the returned field names of the query are in lower case letters.
Thank you for your help.
Regards Timo

Problem with SQL Insert

Hi
I am using Flex to insert data through remoteobject and using
SAVE method generated from CFC Wizard.
My VO contains the following variables where id has a default
value of 0 :
public var id:Number = 0 ;
public var date:String = "";
public var accountno:String = "";
public var debit:Number = 0;
public var credit:Number = 0;
id is set as the primary key in my database.
I have previously used MySQL which automatically generates a
new id if I either omitted the id value in my insert statement or
use 0 as the default value.
However, now I am using MS SQL Server and the insert
generated this error:
Unable to invoke CFC - Error Executing Database Query.
Detail:
[Macromedia][SQLServer JDBC Driver][SQLServer]Cannot insert
explicit value for identity column in table 'Transactions' when
IDENTITY_INSERT is set to OFF.
Strange thing is that I dont see this problem with another
sample application. I compared with that application (it has the
same VO with default value of 0 for id) and everything looks
similar so I can't understand why I have this error in my
application.
This is SQL used to create the table:
USE [Transactions]
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
SET ANSI_PADDING ON
CREATE TABLE [dbo].[Transactions](
[id] [int] IDENTITY(1,1) NOT NULL,
[date] [datetime] NULL,
[accountno] [varchar](100) NULL,
[debit] [int] NULL,
[credit] [int] NULL,
CONSTRAINT [PK_Transactions] PRIMARY KEY CLUSTERED
[id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE =
OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON,
ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Has anyone encountered this problem before with insert
statements dealing with a unique id (with MS SQL Server)?

Change "addRecords =
connection.prepareStatement("
to "addRecords =
connection.preparedStatement("
-BIGD

Local Network Connection Problem with SQL Server 2008 R2

Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?

Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

ODBC Problems with SQL Server 2012 on Virtual Machine

I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.

My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world!

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Problem with NFSv4 Domain name

Hi,
I am creating zones for the first time.
I am having problem with the NFSv4 domain name prompt.
I followed the instructions described in
http://opensolaris.org/os/community/zones/faq/#cfg_sysidcfg
After the installation of the zone, on zonepath/root/etc, I created a sysidcfg file and did
touch *.*NFS4inst_state.domain
Booted the zone and logged in to the zone console.
The sysidcfg worked as expected but the NFSv4 prompt didn't go away:
─ NFSv4 Domain Name ────────────────────────────────────────────────────────────
NFS version 4 uses a domain name that is automatically derived from the
system's naming services. The derived domain name is sufficient for most
configurations. In a few cases, mounts that cross domain boundaries might
cause files to appear to be owned by "nobody" due to the lack of a common
domain name.
The current NFSv4 default domain is: "xx.xx.xx"
      NFSv4 Domain Configuration
      ──────────────────────────────────────────────
      [X] Use the NFSv4 domain derived by the system
      [ ] Specify a different NFSv4 domain
────────────────────────────────────────────────────────────────────────────────
    F2_Continue    F6_HelpWhat is missing?
I am running
$ more /etc/release
                       Solaris 10 11/06 s10s_u3wos_10 SPARC
           Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 14 November 2006
$Thanks in advance

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

Problem with SQL Listener Name

Similar Messages

Maybe you are looking for