Problem with Storage IBM DS Series connector

Hi,
I am trying to configure this connector on Grid Control 10gR5, I've put all the ip´s for the controllers as this:
Name Value
Host or Controller IP Address(es) ”10.50.86.26; 10.50.86.27”
Array WWN / Array Name
but I got the following message:
Failed to contact the target to be added. Following errors were received while testing the connection to the target. Update the properties accordingly, try Test Connection for testing the properties before saving.
TestConnection2 - em_error=Unable to connect to the host/controller
Both IP´s ping OK, I have already checked the information about the controllers and all seems to be ok.
Do you experts know something else that I am missing??
NOTE: I am following the install guide from IBM site.
Regards.

when entering the controller ip addresses, do not use " or ;, enter the ip's with a , separating them (no spaces between the ,
for example: 127.0.0.1,127.0.0.2

Similar Messages

I have problem with storage on my iphone.

I have problem with storage on my iphone 6. Before i uppgrade to the newest ios. I had 100 Gb free. Now i have nothing free. and iphone keeps saying that my storage is full. And does not work propperly
Need help fast thanx

Purchasing more Storage on iCloud will not increase the Storage Capacity of your iDevice.
You need to Delete Content from your iDevice...
Goto... Settings > General > Usage > Storage = Then Delete Content...
See Here > http://osxdaily.com/2013/07/24/remove-data-storage-iphone-ipad/

Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
?Message Edited by studandydon on 07-29-20070:38 AM

I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

Problems with Storage Cluase

Hi,
I have problem with the storage cluase on tables and tablespaces.
When I want to change the max_extents value I get an an ora error.
ALTER tablespace TEST storage ( maxextents 999)
ORA-02142 Not a valid alter tablespace option
It is an locally managed tablespace.
When I want to change the table extent option , the message is
ORA - 25150 Alter Extent Option not allowed
thank for any help
marcel

dear user.
Storage settings for locally managed tablespaces cannot be altered.
atif akram
oracle DBA
[email protected]

Problem with viewing the tv series "Gurren Lagann" in itunes.

When I go to the itunes store and search gurren lagann the page loads fine but when I try to view the complete series itunes stops working. This problem happens with different accounts and on different computers.
the itunes verson that is currently on my inspiron computer is 9.0.3.15
is this a problem with itunes or is it a problem with my computers/accounts?

Fault Module Name: WebKit.dll
Fault Module Version: 5.31.21.8
That's the rendering engine iTunes uses to display the Store contents.
There's a newer version of webkit.dll in the most recent version of Apple Application Support (version 1.4.1 as I write this post). To update your Apple Application Support, the most straightforward procedure would be updating to iTunes 10.1.1.4 ... but if you're not keen on that, we could do it by updating your QuickTime to version 7.6.9 (there's a version 1.4.1 for Apple Application Support in the QuickTime 7.6.9 installer).
If you want to go the QuickTime-update route, here's a link to the download page for QuickTime installers. (Get the installer that doesn't mention QuickTime ... the installer file should be called "QuickTimeInstaller.exe" rather than "iTunesSetup.exe" or "iTunes64Setup.exe".)
http://www.apple.com/quicktime/download/
... does your iTunes behave better with the newer version of webkit.dll in place?

Problem with Storage and iCloud

Hello! I have a problem, and I've read some other threads here and tried what was suggested, but it's still not working for me.
I am using an iPhone 4s. I have purchased 15.0 GB total iCloud storage and I have 10.5 GB available.
This is my problem. I get an error message constantly saying that my storage is full, even though there's barely anything on my phone---and when I say barely anything, I mean it: I have about 3 pages of apps, no games, no large apps, and the most photos I can take before I run out of space is about 30 (!!!) which *****. As I mentioned, there is plenty of space on the cloud (10.5 GB free).
I read on another thread that this is a bug and that I should restart my phone and then do a new backup to the cloud. Only when I try to do that, it says it will take 80+ hours to complete. I suppose to could just leave my phone at home where there's a wi-fi signal and not use my phone for 3+ days, but realistically, that is just not an option; also my wi-fi *****, is slow, and goes out from time to time. If I leave of course I lose my wi-fi signal and the backup stops, and then I have to start it over when I get back.
What should I do? This has become a problem and is getting worse; I used to be able to take 100 photos or more before it filled up and cut me off, but the number has been steadily decreased over the past 2 months, to now filling up at 30 or sometimes less with short videos. Halp!

Sound like there may be something corrupt on your phone if you only have a few apps. 2.46 GB for Other is also quite large, unless you have a massive amout of app data from one of your apps. I would suggest you back up your phone on your computer, then restore it. To do this, do the following:
Connect your phone to your computer, open iTunes, go to File>Devices>Transfer Purchases
Click on the name of your phone in iTunes, go to the Summary tab of your iTune sync settings and click Back Up Now.
After the backup finishes, go to the Summary tab and click Restore.
Your phone will be restored, then it will restart and reappear in iTunes and give you the option to either set it up as a new phone or restore from backup. Choose to restore from backup, selecting the backup you made at the beginning to restore from.
When finished, check to capacity bar again to see if the values look more reasonable. If so, try your iCloud backup again.

Problem with replacement of index series, change of base year

Hi Experts!
I try to explain my problem in Real Estate.
In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
So, I have to change the base year of index in Rent Adjustment.
I think I have changed the base year from 1995 to 2010.
(Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
In table TIVAJINDXCON (previous was empty) now there is this record:
SERIESTO: 08000
BASEYEARTO: 1995
SERIESFROM: 08000
BASEYEARFROM: 2010
CHAINDATE: 31.12.2010
INDEXBASETO: 1,373
But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
I have to set the SAP application as to use 2010 as new base year instead of 1995.
Would you please forward me with any support.
Best regards,
Thank you.
Tania

My question has been answered by SAP.

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

Problems with Storage Spaces

I have a storage space with 10 drives, with over 10GB of free disk space in the pool. Occasionally, certain of my spaces are inaccessible, presumably because two drives intermittently fail; these two drives total2.5g of physical space.
I have retired the two drives, but storage spaces will not let me remove them. When I click remove it says : "cant remove the drive from the pool", "drive could not be removed because not
all data could be reallocated. Add an additional drive to this pool and reattempt this operation".
How can I address this problem?

Hi,
According to Storage Space FAQ, you could find the reason:
Why do I have a low capacity warning even though I still have unused pool capacity?
Storage Spaces provides advance notification of thinly provisioned storage spaces when the storage pool does not have enough capacity spread among a sufficient number of disks to continue to write new data. The default warning point is 70% capacity utilization.
To learn when Storage Spaces will generate a warning, consider the following example.
A two column, two-way mirror space that uses thin provisioning in a four disk pool
Two of the disks have 1TB capacity and two have 2TB capacity. Because a two column, two-way mirror space needs four disks (number_of_disks = NumberOfColumns * NumberOfDataCopies), it will evenly consume all four disks as it writes new data. When capacity
utilization of the two 1TB disks reaches 70%, Storage Spaces will warn of a low capacity condition. Even though the entire pool has 3.2TB free capacity, the thinly provisioned space will soon not be able to write any more data because the 1TB disks are nearly
fully consumed.
You can easily keep individual storage spaces’ low capacity warning synchronized with each other and with the pool by following the guidance in the next section, “How do I increase pool capacity?” from the moment of creating the pool and through all
subsequent expansions of the pool.
For more details, please refer to the link below:
Storage Spaces Frequently Asked Questions (FAQ):
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Roger Lu
TechNet Community Support

Problems with x-fi titanium series.

Hello, i just got a x-fi titanium series sound card from newegg, i installed it and it was running fine with game, music, and movies, but first day i had it, i joined vent and i could all a sudden hear my voice in my headset, so i muted microphone, and it was fine, but i clicked settings in ventrilo, and it came back, so i unmuted it and then all of a sudden it went away, so it seems anytime i open vent or do anything but talk in vent, my voice can be heard in my headset, but i cant seem to be heard by anyone else. So i still have that problem, but today i started up vent, and all of a sudden my headset had a piercing loud noice in it, i did the same thing as mute and unmute the mic and it went away, any [email protected]

One more problem i seem to be having is it never saves settings, i set my mic volume to 20% and master volume to 80%, but it keeps reseting to defaults [email protected]

MacBook Pro 11/2007 problem with SSD OCZ Vertex Series 250 GB

Hi,
you can read my detailed problem in the OCZ board here:
http://www.ocztechnologyforum.com/forum/showthread.php?t=64941
The short version:
- I bought an OCZ Vertex SSD with 250 GB for my 2 years old MacBook Pro
- System Details: MacBookPro3,1; Boot Rom: MBP31.0070.B07; CPU: Intel Core 2 Duo 2.4GHz; SMC: 1.18f5
- The first 250 GB OCZ SSD was an firmware 1.3 and I could install it with Snow Leopard very easy. After 2 days the HDD just disappeared and it also didn't work in an other PC with an internal SATA port and also not with an external disk with sata to FireWire / USB
- I RMA'ed the disk with OCZ and received a new one with firmware 1.4. I tried to install the computer from scratch and it couldn't write the partition when the SSD was connected to the internal SATA port of the MBP. I used the external SATA to USB and formated the disk with another mac. Then I could install SL from scratch but after some hours the computer began to stall and after the reboot it tried to run fschk and I got the error: "kernel[0]: disk0: I/O error."
(again: Further details please have a look at the link above)
- When I boot the system through firewire with the SSD connected through SATA to Firewire it works like a charm but that doesn't make sense (Having a MBP with an external boot drive)
- I RMA'ed the disk again and last week I received the third one but it had the exact same problem.
So now OCZ told me to ask apple for a possible solution. Does anybody have an idea what to do?
I've read two posts about OCZ problems and they wrote about efi 1.7 problem and with efi 1.6 it would work. Didn't try it out yet - should I?
Thanks for you help!
--Goetz aka Tankmann

No ideas?

Problems with storage after failure of restore from TM back up.

Okay, so I've become so frustrated over this that I've decided to see what is the issue. After a horrible incident where I inadvertedly removed the OS start up disk (I unsuccessfully installed Windows 8 without the proper drivers...long story really), etc I was forced to restore my hard drive back to stock through the Genius bar. They recommended that I restore my files with using "Users" from Time Machine because I had backed up everything. Unfortunately, the two times I've tried to restore from backup, it would always stop at 52% (I had about ~250gb to restore) so I just stopped trying and if I needed any files, I would manually transfer them. Anyway, my issue is that I just recently noticed (a month after trying to restore) that I have about ~200gb in my "other" category. In theory, that shouldn't be the case because there is barely anything on my computer. Barely. I've looked at so many websites and so far, no idea... Any ideas? Should I just wipe my hard drive clean again?...because this is getting ridiculous. Thanks in advance.

First, empty the Trash if you haven't already done so.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Problem with storage

the situation shown in the picture happened after 10.10.3 yosemite update
pls help me how can i resolve this problem

Try reindexing Spotlight in your macbook.
Just enter the following text in the terminal
sudo mdutil -E /
This is a more efficient way of reindexing Spotlight. It will prompt you for a password then will re-enable indexing. The information in "About this Mac" will work again with proper storage information.

Problem with storage Bin

Dear All,
My request is like
in material master i have assigned Storage bin ( WH2 view ) but at the time of creating Transfer Order if user put different storage bin then system accept that at post the material to other storage bin .... ( not puting material in storage bin mentioned in material master)
i want to block the TO if user mention any different storage bin at the time of creating TO
PL. HELP
With best regards
Suman

Hi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman

Problems with the Apple ProTraining Series Logix Exp book

I'm trying to learn this stuff, but the lessons in the Training Series book give instructions to do things in menus that seem not to exist in Logic Express. Is this a function of the book serving both Pro and Express versions and not differentiating the possibilities? Or are the books out of date?
Specifically, page 127 it tells me to choose Region>Split/Demix> etc, but that split/demix command is not offered.

The docs that come with LE and the ones available from the Apple site, etc. are definitely screwed up. As I plod slowly through yet another PDF I am constantly finding things that do not work as described in LE and then stumble sideways through the secret undocumented menu trap door that allows the desired function. I refuse to spend money on third party docs. LE is an amazing deal for $300, tack on an additional $100-$200 for information that should come with the program and it becomes less of a deal. I can't speak about the Sitter programs being helpful or not because I haven't used them, a lot of people on this forum seem to dig them, but I'm sorry to hear that it's not helping you. Nonetheless, this is not rocket science and I have faith in everybody's ability to learn LE if they really want to. It's just a program. When you can't figure something out call Apple if you're still covered for free tech help. If not, search this forum and then post a question if you have to. Some posters will give you the RTFM treatment, some will take the time to answer your question. There's nothing wrong with using GB either if that's what works most efficiently for you. Or you can be ambidexterous and use both.

Problem with Storage IBM DS Series connector

Similar Messages

Maybe you are looking for