Problem with TCODE PK02 with the warehouse number field.

Hello folks,
I have created a control cycle in the TCODE PK01. When I tried to change it it is not displaying the warehouse number that I have used while saving. Also here it is showing the warehouse number as a mandatory field.
I have input the warehouse number in the PK02 TCODE and saved. I am able to see the warehouse number value updated in the table also. But again if I try to enter the PK02 TCODE , it is displaying empty warehouse number and showing as a mandatory field.
Also in TCODE PK03 tcode , I am not able to see the warehouse number field I have saved.
Can anyone address on the below issues?:
1. how to configure the PK02 warehouse number mandatory field settings and
2. Populating the warehouse number field in the PK02 and PK03.
Thanks,
Ramineni.
<< Moderator message - You have a better chance of getting answers to a question if you flag your thread as a question rather than removing the flag. >>
Edited by: Rob Burbank on Jun 14, 2011 9:57 AM

Hi,
I do not see warehouse number field in contorl cycle defination..
what type of control cycle is this? Classic or event driven?
Looks like this is a Z screen field..
check if user exit is impliemented properly.
Thanks,
Santosh Sarda

Similar Messages

I have released one PO with tcode ME28 but the PO is still be blocked

I have released my PO with tcode ME28, and the PO is in released status in header data of the PO.
But when I go to MIGO to post a GR, I still get the information that the PO not yet released.
Can anyone tell why and how I can proceed?
Thanks,
Eda

Hi ,
Please check the status of release in ME23N , it might be possible that you would be having more than 1 release to be made .
Check in ME23N how may release status are there and see to it that all the release codes are relesed .
Regards ,
Dewang T.

Hello, okay? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowe

Hello, how are you? On September 13 I bought an iPad and in October bought a game on the app store problem is that when informed the card number dropped normally, but then went on to ask for a new form of payment because one had given any errors, and so not lowered any other game and not upgraded the already downloaded. I do not know what exactly I have to do, because if informed a new payment method continues with the same problem, checked the card bill and really had given an error, because there was no billed the game. I ask you to verify what happened and explain to me what I need to do, because my single card is Visa's and do not intend to return others to use the services of the App Store.
Thank you for understanding.

I think you need the app store support. http://www.apple.com/support/mac/app-store/contact/ Go there and use one of the methods to contact them about your issue and they should be able to help you out.
This forum isn't checked by Apple employees but is for users to help each other out.
Phil

Material does not exist in the warehouse number

Hi
I am new to WM. I am in the process of learning. While learning i encountered an error indicating that the material does not exist in the warehouse number. i hava configured the required organisational structure configuration for WM,
Is anything i have to configure for material or material type it belongs to the warehouse number and if it is yes where can i configure the same.?
Regards
Siva

What is the exact error message and code and in which transaction is it occuring?
The material has to be maintained at the following views:
- Basic Data
- Sales: General/Plant
- Purchasing
- General Plant/Data Storage
- Warehouse Management
- Accounting
Make sure the material exists at each and every Storage Type you use.
You might also need to check the following settings:
IMG > Logistics Execution > Warehouse Management > Interfaces > Inventory Management > Define Storage Location Control
And delete any un-necessary Warhouse to Plant assignments in
IMG > Enterprise Structure > Assignment > Logistics Execution > Assign warehouse number to plant/storage location

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

Is the store that you bought it from close so that you could try going back to them and ask them to activate the card properly ? If not then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Relationship b/w the PO number field in the SO creation screen(va01) and th

Hi All,
What is the relationship b/w the PO number field in the SO creation screen(va01) and the sales order .
Can we maintain a specific number range for the PO Number??
If yes where do we maintain the setting?
Cheerzz..
Subbz..

Hello,
This is nothing to do with a SAP purchase order, and you can't maintain any number range for the same as it is not a system proposed one.
Imagine, the customer is sending a purchase order to you, and you are creating a sales order. We can give a reference to the customers PO number in this filed. It doesn't have any effect.
It is widely used in reporting.
Prase

So i was merging pictures together in events and all of the sudden I had several come up with no pictures just the image number when I click on the picture which is bland a black exclmation point shows up. Have I lost my pictures for good?

So I was merging pictures in the events and all of the sudden several went black and when i clicked on the photos they were gone and when I click on the blank picture with an image number under it an exclamation point show up. Have i lot these pictures for forever?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

My cousin stoled my ipad and i want to track or shutdown my ipad with a passcode using the serial number

i have the serial number and everything else but not my ipad2

go to www.icloud.com and login with your Apple ID. If you have everything setup correctly, you can click on the find my phone icon and then select your device from the options on the left side of the screen.

Im getting texts from some of my contacts that no longer show their name but come across with 1 followed by the phone number.

after updating my iphone 5 c to the latest iOS version, i am getting texts from some (not all) of my contacts that no longer display the name but only +1 followed buy the phone number. Is there something that needs to be adjusted in the settings to fix ths problem?

Open your contact list and swipe down from the top. You can filter your contact list by account. Anything not in any of the listed contact types is a local contact. It would help if we could narrow down where the contacts were stored previously vs. where they are stored now.

Create a Loolup field with PowerShell but Change the Default Display field

Hi
I am creating the a load of site columns with PowerShell. In the case of a Lookup Column I want to ensure that a the the industry column is checked programmatically.
$myField.LookupList = $spLookupList.ID
$myField.LookupField = $LookUpmyField.InternalName
As you can see there is no provision for a display name (Industry) which I want to display to the user once they select a lookup column
I just know somebody is going to suggest CAML !!!! Btw the code works but none of the checkboxes are selected as expected.
Daniel
Freelance consultant

I tried a same in past. Couldn't find a perfect code. You can try below:
http://blogs.msdn.com/b/varun_malhotra/archive/2008/06/19/how-to-set-the-default-value-for-a-look-up-field-for-an-item-as-it-is-being-created.aspx
<Code>
SPList docs = w.Lists["Documents"];
SPFieldLookup fl = (SPFieldLookup)docs.Fields["City"];
fl.DefaultValue = "1;#Mexico City";
fl.Update();
</Code>
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/afd71aa8-54d3-424f-9b72-67328e080048/update-lookup-field-powershell?forum=sharepointdevelopmentprevious
$w = Get-SPWeb http://web
$l = $w.Lists["MyDocumentLibrary"]
$lf = $l.Fields["lookupColumn"]
$i = $l.Items[0] #List item to update
$lf.ParseAndSetValue($i,"1;#lookupvalue") #1;#lookupvalue refers to the ID of the lookup item and the value of the lookup item.
$i.Update()
If this helped you resolve your issue, please mark it Answered

How to prevent users from entering '+' or '0' in front of country code in the phone number field?

Requirement:
How can I prevent guest users from entering '+' sign or '0' in front of country-code in the visitor phone number field during self registration?
Few SMS service providers are not looking for '+' sign or '0' or '00' in front of the international phone numbers to trigger the sms. Providing these values in front of country code during self-registration may fail to deliver the sms to recipient.
Solution:
Using a simple regular expression, you can validate the entered phone number during the guest registration.
The below regular expression will help you to validate the phone number and allows to register only when the phone number is not staring with '+' or '0'.
^[1-9][0-9](\d{7}|\d{8}|\d{9}|\d{10}|\d{11}|\d{12})$
It also performs the below validations.
only numbers are allowed.
first digit of the entered phone number should be 1 to 9, so '+' or '0' is not allowed.
numbers from 0 to 9 are allowed from the second digit.
also validates phone number length, the length of the phone number should be 9 to 14.
Configuration:
To add the above regex in the visitor_phone number filed, please navigate to ClearPass Guest >> Configuration >> (Pages)Guest Self-Registration >> select the self-registration page and go to Edit >> Register Page >> Form >> select the filed visitor_phone and set the Validator to " ISRegexMatch" and enter the above regex in the Validator Argument filed as shown below.
Note: Edit the Validation Error as per your requirement.
Verification
Adding the given regex will validate the phone number and prevent the guest user from registering the phone number starts with '+' or '0'.
Please find below the sample outputs for your reference.
Result when phone number starts with '+' or '0'.
Successful registration.

Is this a Mac Preview issue?

Any suggestions for the ITEM NUMBER field

We sell DVDs, Books, CDs, etc. for which we have item groups setup.
We are using the ISBN based EAN barcode for the bar code field.
Any best practices for coming up with the ITEM NUMBER naming convention that people have for us.
Currently we use the short form title of the DVD or book to denote the item number.
Mike

Hi Mike,
There are always pros and cons for something like Item Code convention.
In my experience, I would like to make them in the same length whenever possible. Because they are internal codes, they should be easier to be used for both technical and non-technical users. Sometimes you might not be able to make both parties happy. In that case, you have to give up something to compromise. The most important above all is to eliminate any duplicated codes. You will find that could the most difficult job if you give more users the abilities to create Item Code. If that is a must for your business, more training will be needed for all those users.
Thanks,
Gordon

Problem in Ad Hoc Query displaying Personnel Number field

Hello,
while creating a query through transaction S_ph0_48000510 I select for display the field "Personnel Number". However while running the query , in the results part , under the field "Personnel Number" , instead of the personnel number , the employee name is displayed.
How can it be ?
I appreciate your help,
thanks,
Mazal

Hi
I think there must be the further selection field in the screen from that you can choose personal number .
Manoj Shakya.
<b>Reminder : Points should be given on answers.</b>

PDF Forms: problem with keypad "decimal dot" when filling "number" fields

Ok, here's my problem :
I've created a form with fields. My client want to input in those fields amount of money. So I've created fields formatted with the "Number" category. 2 decimals, "1234,56" separator style, not currency symbol. So far, so good!
When testing out the form, here's what happening :
On the computer that I've created the form (iMac, Acrobat Pro and Reader, french canadian keyboard layout and system)
Using the keypad, I can input numbers, with the "decimal point" from the keypad no problem.
But when the client is trying to to the same on his PC (and the same is happening with my PC at home, Acrobat Pro 9.2, french canadian keyboard layout and system), I CAN'T use the "decimal point" keypad key to input numbers (like 43,25). It's just not working (error sound). I can however use the "dot" on the keyboard near the "M" key, but the client don't want to do that.
Why is it working on the Mac, but not on the PC's!?
So far, the only workaround that I've found is to set the "money" fields categories to "none" instead of "number.

It is a little bit tricky, but you might have to add your own formatting handler. You would proceed as follows:
1. Set the Format to "none".
2. Add the following script to a Custom Keystroke event:
if (event.change.length > 0 && event.willCommit == false) {event.change = event.change.replace(/\,/gim, ".") ;
3. Add the following script to a Custom Format event:
event.value = event.value.toString().replace(/\./gim, ",") ;
And that should take care of the situation.
Note that i have not tested the scripts, and there may be a chance for bugs.
The advantage of this solution is that internally, you will have the correct format for a number, so that calculations will be correct.
Hope this can help.
Max Wyss.

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Problem with TCODE PK02 with the warehouse number field.

Similar Messages

Maybe you are looking for