Problem with the forums

When i post something and go to watch list. I click the checkbox for email updates and press update. it comes back without the checkbox checked.
i went to my preferences and i have it set to email immediately.
will i be recieving email updates when i get responses?

I don't know. Did you get an email about this one?

Similar Messages

  • Mozilla Firefox problems with the forums

    I just spent an hour trying to access the forums when using Firefox 12. It does not display the bar with the New Your Stuff history etc. It updated itself yesterday or the day before and since then it is impossible to use on this forum.
    I just had a thought and tried IE9 64 bit and it works OK. Loaded the same url on Firefox and the bar with the welcome username was not there.
    It shows that I am logged in under the search box but still asks for me to log in. I even contacted Customer support, but they could not help.
    So if you have problems accessing the forum, use a different browser.

    I tried to log in on the page and it would not accept my password as I was already logged in to Adobe. A new password made no difference, it still would not accept the password and username. Logging in with IE9 was no problem.
    Normally when I click on the adobe forums link on the Dreamweaver help  I am sent to http://forums.adobe.com/community/dreamweaver?lang=en_US  on my default browser - Mozilla. For some days now I have not been sent there, but arrive on the Adobe main page, and have to search for the forums using their search feature. Perhaps there was a crossed or broken link?
    However, today for the first time for a while, it seems to be all working fine. I did report the problem to Mozilla, but whether they did anything I do not know at the moment.
    I will see if this continues to work properly and report back.
    Best wishes
    Howard

  • Problems with the forums -- Oracle personnel please escalate

    I'm sure many have posted this somewhere, but in case they haven't -- the forums aren't rendering code snippets, which looks like xml, properly. In some cases, its eliminating them altogether, in others, it cuts out big chunks, in others it replaces some xml markup with smilies. The result is that its rendering tons of posts and information in them as totally useless.
    If I had to guess, this is because the forums aren't rendering using rawText or something like this, but at the very least, until the problem can be totally fixed, turn off smilies. Smilies are nice, but next to code which document answers, they are unimportant.
    Thanks,
    B

    Shay,
    "We did report it to the people in charge, and they asked that feedback will be posted on the feedback forum."
    I understand your personal plight, and I thank you for passing on the information as you were told. But what I'm talking about is kind of big-picture stuff, pertaining to Oracle as a whole. It encompasses not only the issue of the new forums, but support of any product, be it on forums or metalink, documentation, examples, etc. The frustration coming out that I see seems to have a central theme: Oracle having a "fend for yourself" mentality to their customers.
    Someone posts on the forums, can't get an answer, so they are told "these are for user communication". Then they are told "go post a tar". Then they post a tar and are sent a document they've already read. Then others have said that tars won't address how-tos. Then the JDev forums have problems, and users give feedback, and the response is "go post this somewhere else.".
    This looks like continually passing the buck, propagating an internal bureaucracy to for users to have to understand how to navigate, and forcing upon your users the responsibility for facilitating communication within Oracle. I think Oracle really needs to work on putting themselves in the shoes of their customers, and change the self-centric attitude. I highly doubt that Oracle treats their customers with respect to accounts receivable with the same apparent lethargy they treat customers with respect to support.
    B

  • Some problems on the forums / Reward points

    Hi there,
    I just want to mention that I actually realize two problems with the forums / reward system:
    1.) For <i>some</i> threads in a category overview, in the column "Last Post" in fact the initial post date is given. Nevertheless, the threads are sorted correctly, but it is disturbing. At this moment, this can be seen in Category EP (/community [original link is broken]) for the thread "Netweaver Developer Studio - SAP Enterprise connector error".
    2.) Within my "Total points" overview, I realize that I got 6 points for my answer within this thread https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https:///thread/14351 [original link is broken], but looking there, all stars are empty.
    Hope it helps to determine some problem areas,
    best regards
    Detlev

    Hi Mark,
    next problem:
    3.) Number of replies in the category overview does not fit. Example: Category WAS, /community [original link is broken] thread "UIElement does not have a label", replies by overview: 1, replies in fact: 2.
    Best regards
    Detlev

  • I had an issue when trying to register with the forums, but I am having problems speaking someone because I am not a "registered" member?

    Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering.
    I changed my email password some time ago and forgot that I had done so. I also have a second email which is similar to my address I was registering and I think I was actually using my the second email information until I caught the mistake.
    Shortly thereafter I received an email with my user ID but no password. I had been assuming that I would receive a onetime computer generated password, but I wasn’t sure how things were supposed to go. After closely studying the language of the email, I was led to the conclusion that I would login with my original information I had provided.
    My final attempt to register failed and I can’t explain why. I am positive that I had the right user id and password and now I am in limbo. I registered with the "Add-ons" section in 15 minutes. I was never told I was banned, but I was never told I am now a member. Thanks for reading.
    Sincerely,
    reel4

    Not at all. I have never posted to the forums. The only thing I have written is what you see in this thread. I registered at add-ons section and things were fine. I wanted to use the forums, because I like to learn what I can. The problems began when I tried to register at the forms. At first, I thought my login from add-ons would work at the forums. It didn't. I honestly don't know if there is separate login and validation for each firefox/mozilla section.
    When I attempted to register with the forums, I messed up when trying to login because I made too many attempts. I was either using another password from a second email or I misread those weird words they use to make sure you are not a bot.
    I don't know what exactly was written but they basically wanted to take a look at things. I felt that was reasonable. After all - I felt like a moron for not being able to read those contorted word tests.
    Then they sent me my user id but with no new password so I assumed my current password was the same as the one I originally gave. Long story short, I tried to login again- all three times I failed. They never banned me or told me anything. I have not heard from anyone or thing. To It's like they have just walked away. I just don't understand what has happened and why no one will tell me anything. So... no - I am not banned. When I do bet blocked after I logoff, it has the same effect as a ban. I guess I have been ousted. I just wish this I could get this matter resolved. I changed my password and email so maybe that will keep around.
    It's a strange situation and I am at loss for words. I even wrote the forum people an apology letter describing the facts above in details and apologizing for the inconvenience. I actually apologized for being an idiot.
    One last thing - at the outset of the post - I told you they gave me one last opportunity to login and it failed. I know for a fact I had the information correct. I had even written my password somewhere else on the screen to where I could see each character to verify the pass word was correct and then cut and paste.
    James - who knows what the future holds but I must thank you my friend. At the very least, I could tell my story. It is all so strange.

  • Error thread java : problem with the function "resume 0x***"  (forum sun)

    One problem with the function of jdb occured when I tried to use it to
    pilot the processor with differents threads. In fact, I use a simple example with 2 threads.
    I stop the two threads with two breakpoint, and I want to resume one or the other (with the function "resume 0x****"), the one wich I resumed stop again on the breackpoint and I decide again to resume one or the other. All of that to obtain a tree of execution.
    I give you the code of the class and the code of jdb.
    CLASS: (it's just a object Room with a variable degre that I increment and decrement with two threads increase and decrease)
    public class Test{
         public static void main(String[] args){
              Room r = new Room();
              decrease de = new decrease(r);
              increase in = new increase(r);
              de.start();
              in.start();
    class Room {
         private volatile int degre=20;
         public void more(){
         degre += 4;
         public void less(){      
         degre -= 3;
    class decrease extends Thread{
    private Room room;
    public decrease(Room r){
              room =r;
    public void run(){
    try{ 
         while (!interrupted()){ 
              room.less();
    catch(InterruptedException e) {}
    class increase extends Thread{
    private Room room;
    public increase(Room r){
         room =r;
    public void run(){ 
         try{ 
              while (!interrupted()){
                   room.more();
    catch(InterruptedException e) {}
    JDB:
    Initializing jdb ...
    stop at Test:7Deferring breakpoint Test:7.
    It will be set after the class is loaded.
    runrun Test
    Set uncaught java.lang.Throwable
    Set deferred uncaught java.lang.Throwable
    >
    VM Started: Set deferred breakpoint Test:7
    Breakpoint hit: "thread=main", Test.main(), line=7 bci=30
    7 in.start();
    main[1] stop at room:16
    Set breakpoint room:16
    main[1] stop at room:20
    Set breakpoint room:20
    main[1] resume
    All threads resumed.
    >
    Breakpoint hit: "thread=Thread-0", room.less(), line=20 bci=0
    20 degre -= 3;
    Thread-0[1] threads
    Group system:
    (java.lang.ref.Reference$ReferenceHandler)0x10d Reference Handler cond. waiting
    (java.lang.ref.Finalizer$FinalizerThread)0x10c Finalizer cond. waiting
    (java.lang.Thread)0x10b Signal Dispatcher running
    Group main:
    (decrease)0x146 Thread-0 running (at breakpoint)
    (increase)0x147 Thread-1 running (at breakpoint)
    (java.lang.Thread)0x148 DestroyJavaVM running
    Thread-0[1] resume 0x147
    Thread-0[1]
    Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
    16 degre += 4;
    Thread-1[1] resume 0x147
    Thread-1[1]
    Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
    16 degre += 4;
    Thread-1[1] print degre
    degre = 24
    Thread-1[1] resume 0x146 //It's here the problem, thread 0x146 have to stop on the //next breakpoint of decrease but nothing happen
    Thread-1[1] resume 0x147
    Thread-1[1]
    Breakpoint hit: "thread=Thread-1", room.more(), line=16 bci=0
    16 degre += 4;
    Thread-1[1] clear
    Breakpoints set:
    breakpoint Test:7
    breakpoint room:16
    breakpoint room:20
    PS: I tried many other examples with other class and other kind of breakpoints, but, in any cases, on thread doesn't manage to resume. When I try with general resume (no specification of the thread), It works but it isn't interresting for me because I want to decide wich thread continue his execution.

    Hi,
    I have read the FAQ of the JMF.
    The problem was the jar files of the JMF were not in the JRE\BIN\EXT
    folder of the Java runtime!
    now it works!
    thanks
    Reg

  • Problem with the wireless speed on windows with bootcamp

    I've got a problem with the following:
    the wireless card of my mac pro is very slow when i run windows on my mac pro with bootcamp
    When i just run OSX everything works fine, but in windows, when I connect to the wireless my wireless speed
    drops to 11-18mbs.
    First I thought that it was a drivers issue, but after the update of bootcamp drivers 1.4 the problem still exist.
    First I had a Topcom wireless router now I've bought a Apple Airport Extreme, but the problem isn't solved yet...
    The router isn't 2 meters away from my mac.
    And the wireless speed is fine when i connect with my dads windows laptop...
    Does anyone has a solution? using a cable isnt a solution for me because in September I will move with my mac pro one floor down.

    You might want to ask this in the Boot Camp forums. As your wireless work fine under Mac OS X it sounds to be a software issue as opposed to a hardware one which means as Windows users they'll better be able to help.

  • There is a problem with the security certificate of the proxy server. Error code 18 and 38.

    Hi All,
    After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
    Exchange 2013 on a remote location with a CA-certificate.
    Outlook 2010 and 2013 on different locations, locally installed and on RDS.
    When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
    name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
    After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
    site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
    certificate is invalid or does not match the name of the site."
    Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
    - restarting mailserver and AD;
    - restarting switches;
    - restarting routers;
    - restarting RDS, AD and all other servers;
    - bypassed proxyserver for RDS;
    - created a new profile;
    - checked recently installed updates;
    - checked certificate on mailserver;
    - checked RDS on a different location, working fine.
    Nothing helped, what can I do next? Please advice.
    Regards.

    Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
    The first message can be suppressed by adding this to the Exchange config:
    set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
    set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
    Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
    this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
    Not completely where I want to be, any help regarding the second alert is greatly appreciated!

  • Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

    I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
    Do you have Verizon Fios Internet?
    Are you on the 20/5 connection?
    If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
    I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
    Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
    When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
    I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
    From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
    His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
    The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
    The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
    My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
    Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
    We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
    I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
    This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
    We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
    This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
    If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
    My contact information,
    I have left this out here, you can contact me on these forums...

    Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
    Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
    Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
    Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
    Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
    We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
    It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
    Just strange that one computer can effect all the other computers on the network, even when it is shut down...
    I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
    So now we have three choices,
    We can go back to Windows XP.
    We can buy a new NIC or a wireless card to replace the RealTek...
    Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
    Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
    Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
    Message Edited by keiser0619 on 08-06-2009 03:58 PM

  • How to solve a serious problem with the Battary of my T500 laptop ?

    Hi Forum,
    My personal laptop is Lenovo THINKPAD T500 2055, and its main specifications are as follows:
    - 39T6651 SBB 9 CELL LI-ION BATTERY
    - Intel Core 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
    - 8 GB DDR3 SDRAM Memory Module 4 GB (2 x 4 GB) 1066MHz DDR31066/PC38500 DDR3 SDRAM SoDIMM Kingston.
    - 2 GB Intel Turbo Memory hard drive cache.
    - ATI Mobility Radeon 3650 with 256MB.
    - 160 GB Hard Disk Drive, 7200rpm.
    - Windows 7 Ultimate with the latest Service Pack (x64).
    My problem precisely and concisely is the Battary. I have been using my laptop with the same battary since 01.01.2009 (Almost 3.5 Years), and the battary has been working quite OK.
    Most of the time my laptop is plugged in and working with the electricity. However, A very few times I used the laptop while it is running on battery, Nevertheless, I have the habit to empty the batter once in a while i.e. Every 3 weeks, I unplug the charger and keep using the laptop till I see the warning orange sign (5%), then, I plug it in again.
    Thankfully, I never had any problems with the battary nor the laptop, and when I charge the laptop usually it shows full sign (100%).
    Three days ago, All of a sudden my laptop starts flashing the orange battary sign constantly while charge indicates 100%. When I try running on the battery by unplugging the AC adapter, the laptop loses power immediately and shuts down right away.
    What do you think should I do? Could you please provide me any useful tips to resolve this problem?
    I would greatly and sincerely appreciate all your inputs !
    Thanks for your consideration of my request, and I very much look forward to hearing from you at your earliest convenience !
    Solved!
    Go to Solution.

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hi,  I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

    Hi,
    I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

    What program are you using for this editing?
    We can ask a Host should move your query over to that forum.

  • There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

    For home use, I recently changed from Windows PC to MacBook Air.  I have an iPhone 4 which I synched without problem to the PC.  Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office.  Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
    The latest problem is Outlook does not complete startup.  I get this error:
    There is a problem with the Outlook database.  To use the database, you must rebuild it using the Database Utility.
    I run the utility but it never completes successfully. 
    Step 1 of 5: Scannning...
    Step 2 of 5: Verifying...
    Step 3 of 5: Copying records to new database...
    Step 4 of 5: Recovering data...
    Your database could not be rebuilt. [-18000]
    I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
    What if I Outlook never completes startup?

    Here are the steps that solved the Outlook data corruption problem.
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
    The question was:  Your database could not be rebuilt
    The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
    It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • Is Anyone Having Problems with the newer version of Firefox?

    I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
    So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.

    Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Maybe you are looking for