Problem with variants ?

hi,
while  working on the project
I m getting the same problem again and again with the variants i.e "Maintain the variants for the deletion program first".
as the main requirement of the project is to archive the documents through the Transaction SARA .
pls help.

Hi,
For archiving the things first you need to maintain the variant in which the details regarding material document has to be put.
suppose you want to archive material codes then first you have to go to MM71 and provide material codes by creating variants and then you can go to SARA and do rest of the procedure.
Regards,
sunny

Similar Messages

  • Problem WIth Variant in a report program

    I have a z report program with couple of variants , the problem is the varaints display onlt name of the variant and description when the varaint button is pressed.
    The changed by , date etc details are not getting displayed.
    Thanks
    Arun

    Hi Arun,
    You will not get those data directly from the program execution screen. If you want to get those details, please check table VARID for that variant or program.
    Regards,
    Sourav

  • Problem with variant block

    Hi everibody
    I am nephiew with labview and i am trying to use "to variant" block.
    In the atteachment there is a picture of my VI.
    Where am i wrong?!
    Best regards
    Giovanni
    Attachments:
    variant.png ‏39 KB

    You are right but the problem is more complex.
    This is only a short vi.
    I am communicating with a PLC and to do that i have used a .NET library.
    The problem is that the library gives me some data from the plc in a To string variable. See the atteachment.
    Trhough the variable datatype i select the corrisponding case. In the case of boolean is not a metter. In the case of an int16 i don't know how i can do. I would like to make a different thing for all type of variables...
    is it clear?!
    in the atteachment there is the vi and two screenshot of it.
    Attachments:
    variant2.png ‏14 KB
    variant.png ‏11 KB
    Untitled 2.vi ‏33 KB

  • Problem with variant

    Hi SDN experts,
    what is the Transaction variant ? and Screen variant?

    Hi,
    Use transaction variant to make your fields mandatory, hidden or display. You can hide unwanted screens and fields in any of the standard SAP programs without changing any of the standard programs. Additional features such as making the variant as default on the standard SAP transaction code is only available on 4.6x.
    Steps:
    Transaction SHD0 - Create a variant for the required transaction bychanging the layout through hiding fields and screens.
    Transaction SE93 - Create a variant transaction (e.g. for VA02 you canname it as ZA02). Next allocate the transaction variant to this varianttransaction.
    Create and change the Zxxx area menu with the new transaction variant. In this way, the user does have to remembers any extra transaction codes.
    In 4.6c, you can default your transaction variant as the standard variant. (SHD0 - Edit -> Activate/Deactivate asstandard variant)
    An example for using transaction variant (restricting the field displayfor CO11N - Goods movement) :-
    If you want to restrict changes to the fields in Goods movement forone group of users.
    1. Create a transaction variant for CO11N
    2. Create a new transction code for the transaction variant and assign an authorization object to it
    3. Divide the users into this two transaction code. Those who can change the field using CO11N. For those that have limited
    field change, give them the authorizationfor ZCO11 (this is a new transaction code you have to create).
    For more information, please check this links:
    http://help.sap.com/saphelp_webas620/helpdata/en/eb/5fab41d79b11d296190000e82de14a/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/132f9803d76f40e10000000a422035/content.htm
    http://www.sapgenie.com/abap/tvar.htm
    Regards,
    Ferry Lianto

  • Problems with variant configuration using BAPI on Business connector

    Hi every body I need help.
    Steps.
    1.- I created an RFC with BAPI_SALESORDER_CREATEFROMDAT2 and then  a commit function,
    I call this RFC via SAp business connector
    Im triying to create a Configure order(With characteristics) I fill all configuration structures exactly  like note 567348.
    I created a sales order but when i checked ti in VA01 transaction  the order quantys are diferents at  configuration tables, if the function is executed on directly on SAP this work fine the error is only in a SAP Business Connector
    Is necesary to send another parameter when i Execute Bapis on SAPBC?
    \[removed by moderator\]
    Edited by: Jan Stallkamp on Jun 27, 2008 4:21 PM

    Hi,
    Just debug your SAP BC service in which you are calling the RFC and check if proper values are getting mappend to your input variables of RFC.
    If that is correct than there wont be much chances of problem in BC.
    \[removed by moderator\]
    Regards,
    Siddhesh S.Tawate
    Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PM

  • Problems with Variant to Data in LabVIEW 8.5

    I am having some issues using the variant to data function. In case of NULL variants, the function returns the last known value. Any known fix for this issue. The Database Variant to Data function also exhibits a similar behavior.
    Please advise.
    One other bug in the Database toolkit is with the Get Column Properties.vi wherein the wires for the actual size and defined size need to be swapped.

    Hi VipersView
    VipersView wrote:
    I am having some issues using the variant to data function. In case of NULL variants, the function returns the last known value. Any known fix for this issue. The Database Variant to Data function also exhibits a similar behavior.
    What type of data is your variant and what type of data are you converting to? Do you have any simple examples that demonstrate this behavior? What version of LabVIEW is this?
    VipersView wrote:
    One other bug in the Database toolkit is with the Get Column Properties.vi wherein the wires for the actual size and defined size need to be swapped.
    This was reported to R&D (# 2YBA9P7N) for further investigation. Thanks for the feedback!
    Mike Lyons
    National Instruments
    http://www.ni.com/devzone

  • Authorization message problem with variant transaction

    Hello everybody, I have created a transaction variant ZMM01 from transaction MM01. In the role I specified this new transación (ZMM01) in S-TCODE.
    I can create the material but at the end, instead of the message "material zzz created" I received the message "you are not authorised to MM01".
    Does anybody know how to solve this problem?
    Thanks in advance.
    Maria

    Thanks for your quick answer but if I run SU53 the result is the following:
    Object class AAAB Cross-application Authorization Objects
       Authorization Obj. S_TCODE Transaction Code Check at Transactio Start
           Authorization Field TCD Codi de transacció MM01.
    If I include this I allow the user to access transction MM01, but I don´t want to.

  • Problems with variant transaction zme51n

    Hi,
    I have created a variant transaction zme51n.
    But I can only start the transaction when I add the original transaction 'me51n'
    in T_Code in profile generator.
    Any ideas why?
    Thanx for your help in advance.
    Thomas

    Hallo Rob,
    thanx for your help. I think we're on the right track...
    Greetings.
    Thomas

  • Problems with Image Variants

    I got two problems with Image Variants:
    1. catalogCache.GetImagePath("Images", id) doesn’t work for some id. The error message is “GetImageVariant error”.
    2. catalogCache.Preload("Images", “Original”)
        catalogCache.Preload("Images", “Thumbnails”)
        catalogCache.Preload("Images", null)
       catalogCache.Preload("Images", "")
    get failed, the status code is -2147483647
    Anyone know how to setup  image variants?
    Thanks.
    Forrest

    status code: -2147483647 is RC_BADPARAM.

  • Report Painter problem with empty selection variant

    Hello,
    I use the cost center selection variant for the column definition in Report Painter as characteristic value. This selection variant get only the cost centers which are valid from 1.1.2003 to 31.12.2004. The column of the report created by Report Painter which uses this selection variant display value without taking into account limitations follow from this selection variant. I expect value zero for year fiscal year 2007 in this column, because the cost centers are invalid in 2007 year but the report displays different value. The problem appeared after upgrade from 4.6C to ECC 6.0.
    Best Regards
    ZD

    My problem with Report Painter occurred when I was creating my own report based on 1VK library.
    In my example I used in the column definition characteristic Cost
    Center, which is determined by selection variant, and Basic Key Figure
    equal SWKG-Costs. For system date (18.07.2007) there are no valid
    master data for the characteristic Cost Center but when I execute
    report for fiscal year 2007 the column display no-zero value without
    taking into account value of Characteristic Cost Center. I expected
    zero value in this column because there are no postings for Cost
    Centers (no valid cost centers were selected) in financial year 2007.
    Could you help me with this problem ?

  • Problem to run ABAP job with VARIANT in Redwood

    Hi,
    I am new to SAP, Redwood and this forum so if this topic has been covered earlier I apologize.
    My problem is that I have a SAP job with a VARIANT in SAP that I want to have working in Redwood.
    I import the job with RSI_IMPORT_ABAP_PROGRAMS and the variant with RSI_IMPORT_VARIANTS. At this
    stage I am relatively sure I was able to run the job once by submit RSI_ABAP_RUN with variant.
    I use the RSI_GENERATE_VARIANT to generate the VAREDIT script to be able to change the parameters
    for the ABAP job. Modify the parameters, run the VAREDIT script.
    When I now try to run the RSI_ABAP_RUN with the variant I enters values for instance, client, jobclass,
    ABAP program (from dropdown list), ABAP variant (from dropdown list), Job name (get filled automatically)
    then tries to goto "next" or "submit" I get a popup window.
    Error
    Enter a valid value for the ABAP_VARIANT_NAME.
    I am still able to run the job in SAP with VARIANT and in background.
    Does anyone have any ideas?

    Hi Henrik,
    One of the parameter checks apparently is failing, and in some special cases the issue may be with another (related) parameter.
    Can you tell me exactly which version you are using (6.0.2.x or maybe 7.0.x.y) ?
    You can find this in the view JCS_PRODUCT_COMPONENT_VERSION or by running the RW_SHOW_INSTALLED_COMPONENTS script. I would need to know the repository and the rsi version.
    Have you tried entering a (different) jobname manually ? And if the client number you use below 100, does it have leading zeros or not ?
    Anton.

  • Problems with Idoc Artmas03 to create a variant

    Hi everyone, We had created a individual material through Idoc artmas03, we need to create a variant, we have problems with some segments E1BPE1VARKEY & E1BP1AUSPRT, our problem is how to create a variant & how to full this segments, is this correct from Idoc Armas03? or is it necesary another Idoc? Some have some examples, thank you very much
    Best Regards from Mexico,
    Atte Israel

    Guys,
    I am running mozilla firefoz 5.0 and the only option that is coming to me is to create folder in CA.
    even though SAP recommands IE and allows portal from Mozilla, the later seems to have serious issues with Portal.
    I remember working with several versions of mozilla, sometimes you right click, all option will come but you will be unable to choose options coz when u bring cursor to them they will skid here and there..
    I hope no SAP note elobrates this as of now.
    Ankur

  • Problems with bill copying control and materials with variant configuration

    Hi experts,
    I have a problem with a bill copying control and the way that my customer is trying to create and print the Bill (VF01).
    Let me explain...They have in a Sales Order a material with variant configuration per position, each one can have many characteristics. This characteristics must be printing on the billing document, creating different bills 'coz the max. lines number is 18, so the bill must change page per material-characteristics.
    Example:
    Max. Number Lines = 3
    Position 10      
    Material A     
         -Characteristic A
         -Characteristic B
         -Characteristic C     (Bill 1) 
         -Characteristic D
         -Characteristic E
         -Characteristic F     (Bill 2)
    Position 20
    Material B     
         -Characteristic A     (Bill 3) counting characteristics upside
         -Characteristic B
         -Characteristic C
         -Characteristic D     (Bill 4)
    I created on Tx VOFM (Data Transfer-Billing documents) a routine trying to control this jump, but my problem is when I'm creating the Bill document (VF01) this work only by position, the debugging enter per position.. so I don't have any control to tell the program must count the characteristics and create another bill.
    So... Somebody can help me..or have any idea to solve this problem.....
    Thxs a lot!!!!
    Diego Helfer

    HI Diego
      For our coming assignment, we do have similar sort of situation. Currently we are in Requirements Gathering phase.
      Though we do not have Variant Configuration in place, we do have restriction for no..of items to be used for printing in Billing Documents.
      Current proposal is that we will restrict at Sales Order Creation. If the number of items are increasing, we will restrict saving the document and loading has to be done again. As itz better to restrict at initial phase.
      Our schema is One Sales Order -> One Delivery -> One Billig Document.
       Will post if we can manage to acheive some other way and do request you the same.
    Kind Regards
    Eswar

  • Problems with spaces in file or directory names and Word.exe

    Hi
    I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names.
    I have this
    String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path;
    try {
    Runtime.getRuntime().exec(cmd);
    } catch (Exception errorea){ }
    Here is what happens:
    if path is something like this: "c:\people\info.doc" , there's no problem, Word opens the document, but if path contains blank spaces somewhere, it doesn't work. For example:
    path = "c:\Documents and Settings\info.doc"
    path = "c:\Hi everybody\info.doc"
    path = "c:\tests\test results.doc"
    with the above examples it doesn't work :( Word tries to open "c:\Documents", "c:\Hi" or "c:\tests\test".
    Can anyone help? thanx a lot ! : )

    Hint: use the variant Runtime.exec(String[] args).
    Create a command array, with each token in a separate argument. The entire filename with spaces goes into one argument.

  • While Creating Trasnsaction not taking variant in 'Start With Variant'

    I am trying to create a transaction for report  with variant created through se38 (while creating report). but when I give variant name  in 'Start with Variant '.
    and try to save it, it gives message 'No System Variant chosen for nonlocal objects'.
    How can I create transaction with variant

    HI
    I have created a Tcode in SE93 as u sain using the varints.
    in clint 300
    1.in se93 main screen ihanve enter ZXX_TEST name then pressed create button.
    2. then next screen i have selected the 2nd radiobutton(program and selection screen).
    3.In Program filed I hve given program name.
    4. in START with variant  I have given variant name AA.. this is existed in Clint 320, but not existed in Clint 300).
    5. if i run this in clint 300 it gives me error because variant AA is not existed in the Clien 300.
    6. If i run this in Client 320.. then it is runnig with variant AA.
    The variant u r using is not existed...
    Check the Vairint is existed or not.. where u r running this.
    Please Close this thread.. when u r problem is solved
    Reward if Helpful
    Regards
    Naresh Reddy K

Maybe you are looking for