Problem z oknami rozwinięcia funkcji w Illustrator CS6 przy pracy na dwóch monitorach

Pracuje na Illustratorze CS6 na systemie Yosemite na dwóch monitorach.Zrobiłem ostatnio update i powstał problem. Mając na jednym monitorze obszar roboczy na drugim okienka z funkcjami, kiedy klikam na któreś z okienek dla przykładu trace w rozwiniecie tej funkcji otwieraja/rozwija się ona w różnych miejscach/rogach na drugim monitorze daleko od okienka/miejsca gdzie powinno się rozwinąc. Można cos z tym zrobic? jest do dosyc irytujące, szukanie w którym miejscu wyskoczy okno rozwinięcia. Może ktoś ma podobny problem i znalazł rozwiązanie.

Is this Yosemite 10.10.2?
Then you might have a bigger problem.
There have been some similar issues yesterday - you might want to search through them and try what's been said about the issue.

Similar Messages

  • Problems saving/exporting with Opacity Mask in Illustrator CS6

    Hi, I'm very new to illustrator and self taught. I'm having issues exporting a file with opacity masks to PDF. I have a file with three layers, each with a opacity mask. When I save the file as a PDF, the opacity masks seem to disappear (or they are flattened). I've tried creating a new document and creating it again with no luck. Where am I going wrong? I just want it to look like it does in Illustrator when its exported! Heres the file: Dropbox - BB Logo.ai
    Ideally I'd like to export it to a JPEG or PNG whilst maintaining the opacity masks to give the logo texture. Any suggestions?
    I appreciate any help! Thanks
    Its a little hard to see but heres an Illustrator screenshot:
    PDF screenshot:
    Thanks for looking!!

    You'll need to outline the text and provide the mask image.
    Apart from that: looks to me like a problem with resolution. There's a structure in your exported file, but it's smoothed.
    Without knowing what exactly you did step by step it's difficult to solve this problem.

  • Problem with PDF/X-1a export in illustrator CS6

    I have these huge illustrator files containing a mix of text, vector shapes and placed bitmap pictures cropped using clipping masks.
    When I used to save as a PDF/X-1a:2001 in Illustrator CS3, the clipping masks were applied and only the visible pixels were included in the resulting files, which is the proper behavior.
    In CS6, this flattening/cropping does not happen and the resulting pdf are very big, containing mostly hidden pixels from the clipped-but-still-included bitmap pictures.
    What am I doing wrong here?  I'm exporting as a PDF/X-1a:2001 as before... the "Preserve Illustrator Editing Capabilities" option is unchecked and grayed out...
    Idea anyone? Is this a bug in the export module?
    Thanks!

    So after hours of messing around, here is a solution to apply/crop an illustrator clipping mask on raster images when exporting as a pdf:
    - Set the transparency of the top layer to anything other than "normal".
    - Export as a PDF.
    - Done!
    What seems to happens is that setting a transparency setting triggers the flattener (accessible in Object > Flatten Transparency) upon pdf export.

  • Will Illustrator cs6 or cc work better with following pc perfomence ?

    Will i able to do advanced work with Illustrator cs6 and cc with this PC perfomence without any problem? I want to work with illustrator cs6 or cc and photoshop cs6 or cc at the same time. please help me.
    3.20ghz Core I3-3210 3mb
    8 GB DDR3 RAM
    NVIDIA GTX 650 (1GB) evga

    Illustrator CC will perform better simply because it's using Adobe's mercury engine.

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • Problem with installing adobe illustrator cs6?

    I am having trouble installing adobe illustrator cs6.When it gets to 2% it says "the setup encountered an error (37) during install. Please restart the machine and try again." I tried restarting my computer but it still shows that message.
    Also at the beginning it said "Installer has detected that a machine restart may be pending.It is recommended that you quit the installer, restart and try again" and i clicked ignore and continue.
    When i installed adobe photoshop cs6 last year it was successful.

    follow these steps to clean your computer and reinstall, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Problem retaining link to .tif file in Illustrator

    I'm using CS4 on a PC, however this problem dates back to Version 9 of Illustrator.
    I link .tif files to Illustrator .eps files, so that if I make changes to the .tif, the Illustrator file will show the changes. I place the .tif on a layer, making sure that I've checked the box to "place" rather than "embed" the file. In the upper left corner of the top tool bar, I verify the link by seeing that the file is identified as "linked file". All is good. Now, I save the file, close it, reopen it, and presto, sometimes it has become an embeded file. When this happens, the toolbar will now read "Group." No attempts to replace or re-link the file will be successful. It is as though the file has been corrupted. The only solution I have found is to create a new file and start over.
    Any suggestions?

    Thank you for answering.
    It happens with CMYK files. I haven't used a clipping mask. I routinely use the overprint feature on elements that are on a layer above the .tif, with no resulting problems. I always lock the .tif layer to prevent bad things from happening.
    But if you are saying that some kind of file conversion can happen automatically to "retain appearance", and that no warning or verification occurs, that is interesting. Do you know of a way to reverse this effect?

  • Illustrator CS6 - Organisation problems with printing from PDF

    Hi everybody
    I working with the Illustroartor for some times now and I get better every time, but now its appears that’s I have a organization problem with my Illustrator CS6 and maybe somebody can help me here.
    My problem: I create for example a logo and this logo I like to print on an Objekt like a Paperclip or a Lighter. I have now a print template as a PDF File (see attachement) with serveral predefined print areas. Around 100 predefined printing areas are on the PDF File and the only way to add my logo into this 100 predefined printing areas is by using the funktion “copy/past” but this takes long time and I have to adjust each single logo into the predefined printing area by hand … so this way don’t make really sense and is also very time consuming.
    My question is: Is there any way to automate this process by using e.g. the artboard funktion or some other functions?
    I would appreacte any help in this case!!!
    Thank you very much in advance.
    Nice regards
    Klaus

    Hi Alex,
    There is newer version of Data Modeler (3.0 EA2) and it is free
    You can download it from here
    http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-downloads-185792.html
    Regards
    Edited by: Dimitar Slavov on Dec 9, 2010 2:15 AM

  • Edging problem "thin white line" between paths in Illustrator CS4...

    I am making a map of Europe with Illustrator CS4 for a documentary about WWI and how the Versailles Treaty carved up imperial Germany. After having traced imperial Germany before Versailles, I then carve out the territories given to neighboring states. The problem is these very fine white lines that appear between paths.
    I have two paths right next to each other. But for some reason I see this very thine white line gap that shows up between them and becomes much more evident when I export into Photoshop. Please notice this very fine white line in the black image. What you see in this image are in fact two paths side by side. There should be no line between them. And I have no idea why this very fine line appears but it gets much worse in Photoshop much more noticeable. Please click on image to see the line more clearly.
    Thank you very much in advance for any help or suggestions.
    - Nick

    Dear Jacob and Peter,
    Thank you both very much for your help.
    Please see these photos showing my problem more clearly.
    I am using Illustrator to draw the regions, Photoshop to consolidate the layers, and Apple Motion 4 to build my animation.
    [1] : Imperial Germany in 1914.
    [2] : Germany after Versailles.
    In Illustrator CS4, the images [1] and [2] have the colored layers in "Multiply" transparency mode. It's how I want the layers to look when I import them into Apple Motion 4.
    My idea was to color all the layers black in "Normal" mode and then apply "colorize" filters in Motion 4 and set the transparency to "multiply" in Motion.
    Now with Imperial Germany (all layers colored in black with transparency set to "Normal"), when I bring the image into Photoshop, I suddenly get very fine white lines between the layers and these lines show up in Motion which is the big problem. Like I said, when you click on this last photo, and you see the image full size, you can clearly see the problematic lines which appear exactly where the layers touch each other. In the photo below, the territories ceded to Poland (West Prussia) and Lithuania (Memel) are not yet red. They are still black but you can see the lines.
    I don't understand because in Illustrator there were no gaps whatsoever between the layers. In Illustrator CS4, I simply cut the "territorial losses" from imperial Germany using the "Trim" function in the Pathfinder Menu. I created the red and yellow layers from the original single "imperial Germany" layer. In Illustrator I can colorize all the layers black and still never see any gaps. The fine white lines, appear in Photoshop and in Motion.
    (NOTE: The documentary is being in edited in Final Cut Studio which is why I use Motion for animating.)
    Sorry to ramble on. Thank you again for any further help you can give me.
    - Nick

  • Illustrator CS6 64-bit dvaui.dll and msvcr100.dll crashing problem, any solution?

    First things first, trying to find a tech support Email address or phone number has been infuriating.  The "3-step support wizard" which results in "go to the forums" is also infuriating and insulting.
    I have a Windows 7 64-bit PC running CS6 64-bit (updated/current), and it's crashing at random (2-3 times per day).  I see events recorded in the event log showing dvaui.dll and msvcr100.dll as the source.  Other people have raised this as an issue, and all I see are guesses.  Does Adobe have a credible solution for this yet?
    I've tried running as a domain admin, which did not help.
    Illustrator CS6 32-bit seems to be working perfectly (4 days straight, no crashing).
    It seems to currently affect only one computer (5 others are fine).  It's not repeatable, and has no discernible cause.
    Also, format and reinstall is neither a solution nor an option.
    To be honest, I'm looking for Adobe to address this directly: do you know why this is happening, and how long until it is solved?  If an Adobe tech support will open a case, I have a file that the designer (I'm not the designer) was using during one of the crashes.  I don't know if the crashing will be related (to the file), but I have the file just in case.
    David.

    Hi Larry,
    Thank you for responding.
    > CS6 is current in that it is still available for purchase and in the CC but it is now two versions behind.
    I'm not quite sure what you are trying to say.  Can you be explicit, please?
    > As to your problem have you tried downloading the .dll files from Microsoft and reinstalling them?
    I have copied and re-registered the DLL files from a known-good machine (that is to say that the machine doesn't exhibit any of the symptoms as the above machine), which did not help.
    I'm really interested in having Adobe respond directly to this issue.  I know they are aware of it.
    It's clear that Adobe doesn't actually want to support this program, but people rely on it for their economic success.  Both my client and his employees need this program to function properly and reliably, and I think anyone would agree that it's reasonable to expect that a problem like this (that affects more than just us) be, at a minimum, addressed.  Adobe has my client's money, they had no problem accepting it.  With that acceptance comes a duty to be responsive.
    Thanks,
    David.

  • Illustrator CS6 opening and saving problem. Please help

    Hello
    I have Illustrator CS6 installed on windows 8.1. Every time I save a file as ai. format, it will automatically create a copy on the desktop. When I deleted the copy and try opening the original file, the error message "The file is an unknown format and cannot be opened" pops up. I've checked that the file is not "read only", deleted the pref files and even reinstalled Illustrator CS6 but none of these have solved the problem. I have also noticed that I cannot copy or rename the file as the same error message pops up. Any solutions? please help

    (1) When I go to open files, raw or jpeg, I now need to enter a value for 'enable' on the open dialog.  That never was necessary before.
    Could you please post a screenshot with the pertinent Panels/Dialogs visible?
    (2) When I go to save as jpeg, the file type defaults to eps. 
    So you select jpg from the dropdown list and it switches to eps?

  • Printing problems using Illustrator CS6 (Mac)

    Hi,
    I'm having trouble using Illustrator CS6. I just bought an HP LaserJet CP1025nw color printer. My operating system is Mac OS X 10.6.8.
    I've printed two different format files (.ai and .png) in Illustrator, but there are white lines (without printing) ocurring in the exact same place on both documents, this only happens in Illustrator, not Photoshop or any other software. I did a test using exactly the same .png file in many applications, except for Illustrator, the file is printed perfectly.
    I asked HP for help, but they say this is a problem caused by Illustrator CS6 and they can't do anything about it.
    What can I do to solve this problem? Could you please help me?
    I've already installed the latest update of this software.
    Thanks in advance.

    hong,
    You need to ClickDrag just a tiny bit, then apply the Shift Option Command.

  • My illustrator CS6 is having screen viewing problems. Everything is blurry

    My illustrator CS6 is having screen viewing problems. Everything is blurry

    All files look almost as if they are in a draft mode. Doesn't matter witch file I open they all look the same. but very thing is printing out fine. Also I tried creating a test user and down loaded the trial version and it works fine.

  • Illustrator CS6 EPS 10 Problem

    Hello,
    i have a problem whis Illustrator CS6 and EPS 10!
    i need to save my files in eps10 for (istock, shutterstock) but its always the same problem "The Files are not EPS10" and can not be opened!
    can someone help me!
    Thanks

    Whenever you are done producing the original CS6 file, just do a simple: Save As > EPS > v10; but save it as a copy, so you always have the original file for edits in the future.  You'll get the customary warnings of compatability...just OK those as you do the copy.

  • Problem to install Illustrator Cs6

    Hello.
    I have a problem to install cs6 Illustrator Trial.
    The problem is:
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR: DF015 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: Adobe Illustrator CS6 Core 16.0.0.0 {AAF0D225-F129-40F2-916E-12E28DBD19ED} -----------
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 2135)
    I've downloaded and used Cs Cleaner Tool for installation problems, restart my system and try to install again, but the problem continues.
    Somebody, can help me plis? Thank you!

    Sanandus18 you have a file permission failure and are currently unable to delete the Illustrator application within the /Applications/Adobe Illustrator CS6/ folder.  Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Maybe you are looking for