Problema Interface Dot11Radio0 is reset

    Porfavor pido puedan ayudarme urgente, ya he configurado casí todas laas posibilidades y no encuentro el problema. sobre Dot11Radio0 is reset, line protocol is down
   aaa new-model
aaa authentication fail-message ^CCCCCCCC!!!!!!!Fallo en login. Cinco fallas con
s
ecutivas revoca su usuario !!!!!!^C
aaa authentication login default group tacacs+ local
aaa authorization exec default group tacacs+ if-authenticated
aaa session-id common
dot11 ssid vlan9001
   vlan 901
   authentication open
   infrastructure-ssid
username Cisco password 7 123A0C041104
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid vlan9001
antenna gain 10
speed  basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0
station-role non-root
infrastructure-client
interface Dot11Radio0.304
encapsulation dot1Q 304
no ip route-cache
no snmp trap link-status
bridge-group 2
bridge-group 2 spanning-disabled
interface Dot11Radio0.901
encapsulation dot1Q 901 native
no ip route-cache
no snmp trap link-status
bridge-group 1
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
hold-queue 80 in
interface FastEthernet0.304
encapsulation dot1Q 304
no ip route-cache
no snmp trap link-status
bridge-group 2
bridge-group 2 spanning-disabled
interface FastEthernet0.901
encapsulation dot1Q 901 native
no ip route-cache
no snmp trap link-status
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.41.74.193 255.255.255.0
no ip route-cache
ip default-gateway 10.41.74.254
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee

Configuraación del ROOT, pero el problema es el non-root.
dot11 ssid vlan9001
   vlan 901
   authentication open
   infrastructure-ssid
username Cisco password 7 047802150C2E
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid vlan9001
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel least-congested 2412 2422 2462
station-role root
infrastructure-client
interface Dot11Radio0.304
encapsulation dot1Q 304
no ip route-cache
bridge-group 2
interface Dot11Radio0.901
encapsulation dot1Q 901 native
no ip route-cache
bridge-group 1
interface FastEthernet0
no ip address
no ip route-cache
hold-queue 80 in
interface FastEthernet0.304
encapsulation dot1Q 304
no ip route-cache
bridge-group 2
interface FastEthernet0.901
encapsulation dot1Q 901 native
no ip route-cache
bridge-group 1
interface BVI1
ip address 10.41.74.194 255.255.255.0
no ip route-cache
ip default-gateway 10.41.74.254

Similar Messages

  • AP 1252 dot11radio interface status shows RESET

    Hi,
    This is regarding an issue with one of my access point. The access point 1252 is autonomous one running the IOS version
    C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
    The status of the dot11Radio 0 interface is showing as RESET. I have pasted the interface brief details below.
    ap03#
    ap03#
    ap03#sh ip int brief
    Interface                  IP-Address      OK? Method Status                Protocol
    BVI1                       <ipaddress>       YES DHCP   up                    up 
    Dot11Radio0                unassigned      YES TFTP   reset                 down
    Dot11Radio0.102            unassigned      YES unset  reset                 down
    Dot11Radio0.104            unassigned      YES unset  reset                 down
    Dot11Radio0.105            unassigned      YES unset  reset                 down
    Dot11Radio0.108            unassigned      YES unset  reset                 down
    Dot11Radio1                unassigned      YES TFTP   administratively down down
    GigabitEthernet0           unassigned      YES TFTP   up                    up 
    GigabitEthernet0.102       unassigned      YES unset  up                    up 
    GigabitEthernet0.104       unassigned      YES unset  up                    up 
    GigabitEthernet0.105       unassigned      YES unset  up                    up 
    GigabitEthernet0.106       unassigned      YES unset  up                    up 
    GigabitEthernet0.108       unassigned      YES unset  up                    up 
    ap03#
    Due to this the clientsa re not getting associated.
    I tried rebooting the AP; shut the dot11radio0 interface and unshut it; verified the switch end duplex speed settings. Looks good.
    Can anyone suggest me how to proceed?
    Thankyou.

    Hi,
    Yes the Access Point was working fine all these days and for the last one week, I am facing this problem. Please find the  running configuration of the Access point as below..
    Building configuration...
    Current configuration : 8275 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    hostname ap03
    logging buffered 65536 notifications
    enable secret 5 $1$.WG7$dvJpY1XHuixBk3wA4sfR3/
    aaa new-model
    aaa group server radius rad_eap
    server auth-port 1812 acct-port 1813
    aaa authentication login default group tacacs+ local enable
    aaa authentication login eap_methods group rad_eap
    aaa authorization exec default group tacacs+ local
    aaa accounting exec default start-stop group tacacs+
    aaa session-id common
    clock timezone MST -7
    clock summer-time MDT recurring
    ip rcmd rsh-enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host ncc ncc
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host datacom datacom enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host netsvcs netsvcs enable
    ip rcmd remote-host datacom datacom enable
    ip domain list u04129.albertsons.com
    ip domain list albertsons.com
    ip domain name u04129.albertsons.com
    ip name-server
    ip ssh time-out 90
    dot11 activity-timeout unknown default 28800
    dot11 ssid Courage-34idkeysNCswuZue3765#%@&
       vlan 102
       authentication open eap eap_methods
       authentication key-management wpa
    dot11 ssid Freedom-jKb%&552en@546AsdfG65eD
       vlan 105
       authentication open eap eap_methods
       authentication network-eap eap_methods
       authentication key-management wpa
    dot11 ssid Galaxy-73j4CA58fd66y3lKICK#%@&*
       vlan 104
       authentication open
    dot11 ssid Quake-35f8d4q9e5@365%lFh&ju#ef2
       vlan 108
       authentication open eap eap_methods
       authentication key-management wpa
    dot11 holdoff-time 60
    dot11 arp-cache optional
    power inline negotiation prestandard source
    dot1x timeout reauth-period server
    username Cisco password 7 02250D480809
    username ggg privilege 15 secret 5 $1$E4Ms$78SOM7s3gZ8QxU.mlnEpj.
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption vlan 104 key 1 size 128bit 7 80B78765DD670039FE1557E4BFB4 transmit-key
    encryption vlan 104 mode wep mandatory
    encryption vlan 108 mode ciphers tkip
    encryption vlan 102 mode ciphers tkip
    encryption vlan 105 mode ciphers tkip
    ssid Courage-34idkeysNCswuZue3765#%@&
    ssid Freedom-jKb%&552en@546AsdfG65eD
    ssid Galaxy-73j4CA58fd66y3lKICK#%@&*
    ssid Quake-35f8d4q9e5@365%lFh&ju#ef2
    power local 17
    packet retries 64 drop-packet
    no preamble-short
    channel 2412
    station-role root
    beacon dtim-period 4
    no dot11 extension aironet
    bridge-group 1
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface Dot11Radio0.102
    encapsulation dot1Q 102
    no ip route-cache
    no cdp enable
    bridge-group 102
    bridge-group 102 subscriber-loop-control
    bridge-group 102 input-type-list 201
    bridge-group 102 output-type-list 201
    bridge-group 102 port-protected
    bridge-group 102 block-unknown-source
    no bridge-group 102 source-learning
    no bridge-group 102 unicast-flooding
    bridge-group 102 spanning-disabled
    interface Dot11Radio0.104
    encapsulation dot1Q 104
    no ip route-cache
    no cdp enable
    bridge-group 104
    bridge-group 104 subscriber-loop-control
    bridge-group 104 input-type-list 201
    bridge-group 104 output-type-list 201
    bridge-group 104 port-protected
    bridge-group 104 block-unknown-source
    no bridge-group 104 source-learning
    no bridge-group 104 unicast-flooding
    bridge-group 104 spanning-disabled
    interface Dot11Radio0.105
    encapsulation dot1Q 105
    no ip route-cache
    no cdp enable
    bridge-group 105
    bridge-group 105 subscriber-loop-control
    bridge-group 105 input-type-list 201
    bridge-group 105 output-type-list 201
    bridge-group 105 port-protected
    bridge-group 105 block-unknown-source
    no bridge-group 105 source-learning
    no bridge-group 105 unicast-flooding
    bridge-group 105 spanning-disabled
    interface Dot11Radio0.108
    encapsulation dot1Q 108
    no ip route-cache
    no cdp enable
    bridge-group 108
    bridge-group 108 subscriber-loop-control
    bridge-group 108 input-type-list 201
    bridge-group 108 output-type-list 201
    bridge-group 108 port-protected
    bridge-group 108 block-unknown-source
    no bridge-group 108 source-learning
    no bridge-group 108 unicast-flooding
    bridge-group 108 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    shutdown
    dfs band 3 block
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    interface GigabitEthernet0.102
    encapsulation dot1Q 102
    no ip route-cache
    bridge-group 102
    no bridge-group 102 source-learning
    bridge-group 102 spanning-disabled
    interface GigabitEthernet0.104
    encapsulation dot1Q 104
    no ip route-cache
    bridge-group 104
    no bridge-group 104 source-learning
    bridge-group 104 spanning-disabled
    interface GigabitEthernet0.105
    encapsulation dot1Q 105
    no ip route-cache
    no cdp enable
    bridge-group 105
    no bridge-group 105 source-learning
    bridge-group 105 spanning-disabled
    interface GigabitEthernet0.106
    encapsulation dot1Q 106 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0.108
    encapsulation dot1Q 108
    no ip route-cache
    no cdp enable
    bridge-group 108
    no bridge-group 108 source-learning
    bridge-group 108 spanning-disabled
    interface BVI1
    ip address dhcp client-id GigabitEthernet0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    no logging trap
    access-list 1421 permit
    access-list 1421 permit
    access-list 1421 permit 0.0.0.255
    access-list 1421 permit 0.0.0.255
    access-list 1421 permit 0.0.255.255
    access-list 1421 permit 0.0.255.255
    access-list 1421 permit 0.0.255.255
    access-list 1421 permit 0.0.255.255
    access-list 1421 deny   any
    access-list 201 permit 0x0800 0x0000
    access-list 201 permit 0x0806 0x0000
    access-list 201 deny   0x0000 0xFFFF
    snmp-server view NCC mib-2 included
    snmp-server community TROUbleIStrouBLE view NCC RO
    snmp-server community CHECKtheMAIL RO
    snmp-server community HAVocREEk RW
    snmp-server community 1aPe3nLnmDt4yVYmbgWoUVjJYz1 view NCC RO 1421
    snmp-server community 1aUQ5DAIH2bTBlvJg6RFS5qfsr RO 1421
    snmp-server community 1OGgsN21DI4q01QeeIhJGF961 RW 1421
    snmp-server enable traps tty
    tacacs-server host
    tacacs-server host
    tacacs-server directed-request
    tacacs-server key 7 110A1D5347415C5B53737F7D2E26
    radius-server attribute 32 include-in-access-req format %h
    radius-server host auth-port 1812 acct-port 1813 key 7 10190C4A533C07185D50721569013D3C3638022F4E0E42400102773D0D481A5E0E
    radius-server vsa send accounting
    bridge 1 route ip
    line con 0
    line vty 5 15
    sntp server
    end

  • Interface dot11radio1 is reset down and does not works.

    I configured ssid and is a nonroot equipement and whwn I do sh ip inter brief the status interface dot11radio1 is reset and down and does not assosciate with the root AP
    This is the configuration:
    ip ssh version 1
    dot11 ssid fbpinto
    authentication open
    authentication shared
    authentication key-management wpa
    wpa-psk ascii 7 051C160E315F450F1B151E1C1F03
    dot11 network-map
    power inline negotiation prestandard source
    username Cisco password cisco
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    shutdown
    station-role root bridge
    infrastructure-client
    bridge-group 1
    bridge-group 1 spanning-disabled
    no sh
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm tkip
    ssid fbpinto
    antenna gain 9
    power client local
    station-role non-root bridge
    infrastructure-client
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    bridge-group 1 spanning-disabled
    no sh
    interface BVI1
    ip address 172.27.119.10 255.255.255.128
    no ip route-cache
    no sh
    ip default-gateway 172.27.119.1

    Thanks very much!
    Then untilk the noonroot is not associate the interface radio remanis in  restet status protol down ¿is it?
    My problem is that this Brigge  working fine for a year ago but  one day fails and I replace the bridge  but the interface radio remain in status reset  too¿can be that the extenal antenna is broken? and therfore no signal received by the interface and can not associate with root for it?
    I try to put boths brigge close and test if interface radio is up and works fine .If works like this I think that is a problem with the extrenal anntena ( dipolo)
    regards

  • %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down

    Hello,
    On a 4402 wireless controller (7.0.220.0) with LAP1242AG-E-K9 and LAP1252AG-E-K9 access points I receive lots of messages like this:
    Dec  9 12:55:16 ap-a1 1466: AP:001a.2f58.d4d6: *Dec  9 11:55:16.174: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    Dec  9 12:55:17 ap-a1 1467: AP:001a.2f58.d4d6: *Dec  9 11:55:16.211: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    what is a little bit annoying, in particular for voice communications.
    Is there a way to get more information from any logs or is there a similar problem discussion anywhere on this forum?
    Thanks.

    Hi Konstantin,
    Unfortunately I do not think we have the radio status codes published, but I'll comment on them here:
    Status 51: Reset on transmit completion. I'm not 100%, but I think this means the radio was supposed to reset (due to another reason) but had data to transmit, so it completed TX and then reset.
    Status 52: Reset on completion of multicast packets. Similar to above, just with multicast traffic being queued up.
    Status 37: Generic interface reset (up/down), often seen during bootup or on configuration changes.
    Status 54: Radio interface was shutdown -- either configured by the user or perhaps part of the boot process.
    Status 67: Reset after changing hostname on the AP. This also would occur on bootup once the config is loaded.
    Status 71: Reset to update radio status on WLC. Also usually done upon AP joining the WLC after bootup.
    -Pat

  • Interface Dot11Radio0, failed - cmd busy -Traceback.....

    hi everyone,
    please help me,
    i have a problem with cisco autonomous:
    Product/Model Number: AIR-AP1131AG-E-K9 System Software Filename: c1130-k9w7-tar.124-10b.JA System Software Version: 12.4(10b)JA Bootloader Version: 12.3(8)JEA
    the problem is that my autonomous cisco AP sometimes crash and the only way to overcome this is to reset the AP...
    i found the log --> "Interface Dot11Radio0, failed - cmd busy -Traceback= 0x5DBF8 0x4EDE70 0x4EDDD4 0x797684 0x7978E4 0x79BD64 0x4ECEC8 0x4ED2D0 0x4ED684 0x198850"
    any comment on this problem....
    please advice....
    thanks

    In enable mode, can you do a "dir flash:" and post the contents?
    Do a "show ip interface brief" and make sure your radios are still up/up.

  • The HECI interface is being reset (T500)

    Hello!
    I've got a big Problem with my T500.
    I hope anyone can help me.
    Sporadically i have a big HDD activity for about 1 - 2 minutes and i have the feeling that my thinkpad is freezing
    After that there is the typically sound of "Hardware wurde entfernt" --> "Hardware wurde hinzugéfügt"
    In my ErrorLog there are the following Events:
    1. The HECI interface is being reset.
    2. Das Gerät \Device\CdRom0 ist für den Zugriff noch nicht bereit.
    3. Das Gerät \Device\Ide\iaStor0 hat innerhalb der Fehlerwartezeit nicht geantwortet.
    4. Das Gerät "Optiarc DVD RW AD-7910S" (IDE\CdRomOptiarc_DVD_RW_AD-7910S_________________​1.D0____\4&22a1c084&0&0.1.0) wurde ohne vorbereitende Maßnahmen vom System entfernt.
     5. usw
    Why do i have a big HDD activity and the eventlogs are saying there is a Problem with my DVDROM?
    What i've done till now:
    1. Reinstall Vista
    2. Deinstall the Intel Tools for the AMT and Turbo Memory and Storage Manager
    3. Deactivate AMT in the Bios
    But the Problem is not solved
    Thank you for your help!
    (i know my english is not the best ;-) )

    Hello again!
    After a lot of testing i've got still the same Problem but only the following event entry:
    the embedded controller ec did not respond within the specified timeout period. this may indicate that there is an error in the ec hardware or firmware or that the bios is accessing the ec incorrectly. you should check with your computer manufacturer for an upgraded bios. in some situations this error may cause the computer to function incorrectly. 
    Der eingebettete Controller (EC) hat nicht innerhalb des angegebenen Zeitlimits reagiert. Dies deutet auf einen Fehler in der EC-Hardware oder -Firmware hin bzw. darauf, dass das BIOS auf falsche Art auf den EC zugreift. Fragen Sie den Computerhersteller nach einem aktualisierten BIOS. Dieser Fehler kann in einigen Situationen zur Folge haben, dass der Computer fehlerhaft läuft.
    Message Edited by David_H_82 on 04-03-2009 12:11 PM

  • Dot11Radio0 is reset

    Anyone know how to rest the Dot11Radio?
    I have also try to config the power level but it prompt me that the selection is invalid.
    Dot11Radio0 is reset, line protocol is down
    Hardware is 802.11G Radio, address is 0000.0000.0000 (bia 0000.0000.0000)
    MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
    reliability 255/255, txload 1/255, rxload 1/255
    Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
    ARP type: ARPA, ARP Timeout 04:00:00
    Last input never, output never, output hang never
    Last clearing of "show interface" counters never
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: fifo
    Output queue: 0/30 (size/max)
    5 minute input rate 0 bits/sec, 0 packets/sec
    5 minute output rate 0 bits/sec, 0 packets/sec
    0 packets input, 0 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
    0 input packets with dribble condition detected
    0 packets output, 0 bytes, 0 underruns
    0 output errors, 0 collisions, 1 interface resets
    0 babbles, 0 late collision, 0 deferred
    0 lost carrier, 0 no carrier
    0 output buffer failures, 0 output buffers swapped out
    DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio won't start, Trying hardware reset on radio
    %SYS-3-CPUHOG: Task is running for (1996)msecs, more than (2000)msecs (4/4),process = Dot11 driver.
    -Traceback= 23F878 23F860 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    %SYS-3-CPUHOG: Task is running for (3995)msecs, more than (2000)msecs (4/4),process = Dot11 driver.
    -Traceback= 23F858 23B644 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    %SYS-3-CPUHOG: Task is running for (5994)msecs, more than (2000)msecs (5/4),process = Dot11 driver.
    -Traceback= 23F860 23B644 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
    %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available

    It still does not help even if i clear and change the configuration. Still receive:
    *Mar 1 00:01:53.230: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
    *Mar 1 00:01:53.230: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
    *Mar 1 00:01:53.231: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar 1 00:02:14.362: %DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio won't start, Trying hardware reset on radio
    *Mar 1 00:02:16.360: %SYS-3-CPUHOG: Task is running for (1998)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
    -Traceback= 23F850 23B644 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    *Mar 1 00:02:18.359: %SYS-3-CPUHOG: Task is running for (3997)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
    -Traceback= 243BF0 23F860 23B644 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    *Mar 1 00:02:20.358: %SYS-3-CPUHOG: Task is running for (5996)msecs, more than (2000)msecs (0/0),process = Dot11 driver.
    -Traceback= 243BE8 23F858 23B644 40AC60 679960 67C634 413FA4 41B2A8 1357B0
    *Mar 1 00:02:28.559: %LINK-3-UPDOWN: Interface BVI1, changed state to up

  • Interface Dot11Radio0, cannot associate: No matching SSID

    Hi all, I have a problem with a P2P Bridge with a couple of Aironet 1242AG.
    Sometimes this Bridge goes down, and if I change Channel, it goes up.
    When Bridge is down I can see this log in NoRoot:
    *Apr 23 04:12:20.002: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associated To AP XXXX-Root 0014.1b60.9230 [None WPA PSK]
    *Apr 23 04:12:20.003: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Apr 23 04:12:20.008: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: authenticate response status (12) denied
    *Apr 23 04:12:20.069: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associated To AP XXXX-Root 0014.1b60.9230 [None WPA PSK]
    *Apr 23 04:12:20.079: %DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, parent lost: Received deauthenticate (2) not valid
    *Apr 23 04:12:20.081: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Apr 23 04:12:31.049: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No matching SSID
    *Apr 23 04:13:32.392: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from 0014.1b60.9230 channel 6 3669
    *Apr 23 04:18:46.404: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Authenticating
    *Apr 23 04:30:18.666: %DOT11-4-UPLINK_ESTABLISHED: Interface Dot11Radio0, Associated To AP XXXX-Root 0014.1b60.9230 [None WPA PSK]
    *Apr 23 04:30:18.666: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    I can see this log in Root:
    7w4d: %DOT11-7-AUTH_FAILED: Station 001c.f663.1110 Authentication failed
    7w4d: %DOT11-4-MAXRETRIES: Packet to client 001c.f663.1110 reached max retries, removing the client
    7w4d: Client 001c.f663.1110 failed: reached maximum retries
    7w4d: %DOT11-7-AUTH_FAILED: Station 001c.f663.1110 Authentication failed
    I don't understand "No matching SSID" and authentication error, the Wpa-psk and Ssid are the same.
    Do you have idea? I suppose a RF problem.
    Regards

    Hi,
    The "no matching SSID" appears when your non-root bridge tries to associate to a given SSID and does not detect any parent offering that SSID...
    This seems to indicate (IMHO) a RF problem... you may want to try to monitor the link quality between your root and non root. If the signal is lots, then you would typically get this no matching SSID message while the non-root tries to reconnect without success.
    Which code are you running on these APs?
    Jerome

  • Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

    Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days.  I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying.  iPhone remote app works just fine.  Any suggestions?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Interface Dot11Radio0 cannot associate: No Response

    Having an issue with a non-root bridge communication with the root device getting the error message -
    *Mar 1 12:55:34.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response
    *Mar 1 12:55:46.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Rcvd response from 6cfa.8918.12e0 channel 3 3240
    *Mar 1 12:57:01.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Authenticating
    *Mar 1 13:02:59.159: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: Associating
    I believe the issue may be down to the SSID but can't see what's wrong with the config any Ideas?
    config of the WAP is -
    Current configuration : 2074 bytes
    version 15.2
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname UKPA
    logging rate-limit console 9
    enable secret 5 $1$y65O$Duk6tL2w8VxpeSkH9WIWu/
    no aaa new-model
    no ip cef
    dot11 syslog
    dot11 ssid BRIDGE
       vlan 182
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 7 c942cc494622b70e126618c19eb768ee6fc8ded892204e7367b42384168f15c1
    dot11 guest
    username Cisco password 7 047802150C2E
    bridge irb
    interface Dot11Radio0
    no ip address
    encryption vlan 182 mode ciphers aes-ccm tkip
    ssid BRIDGE
    antenna gain 0
    packet retries 64 drop-packet
    station-role non-root
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Dot11Radio0.182
    encapsulation dot1Q 182
    bridge-group 182
    bridge-group 182 subscriber-loop-control
    bridge-group 182 spanning-disabled
    interface Dot11Radio1
    no ip address
    shutdown
    antenna gain 0
    peakdetect
    no dfs band block
    packet retries 64 drop-packet
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    interface GigabitEthernet0
    no ip address
    duplex auto
    speed auto
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0.182
    encapsulation dot1Q 182
    bridge-group 182
    bridge-group 182 spanning-disabled
    no bridge-group 182 source-learning
    interface GigabitEthernet1
    no ip address
    duplex auto
    speed auto
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 10.182.22.11 255.255.128.0
    ipv6 address dhcp
    ipv6 address autoconfig
    ipv6 enable
    ip default-gateway 10.182.1.1
    ip forward-protocol nd
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    bridge 1 route ip
    line con 0
    line vty 0 4
    login local
    transport input all
    end

    Hi Paul,
    Info: Point to remember is Non-Root Bridge to be connected to Root Bridge via native vlan SSID in order to carry multiple WLAN(or vlans) through this wireless bridge.
    Try this:
    interface Dot11Radio0.182
    encapsulation dot1Q 182 native
    bridge-group 1
    interface GigabitEthernet0.182
    encapsulation dot1Q 182 native
    bridge-group 1
    To know more, please check this:
    https://rscciew.wordpress.com/2014/10/26/autonomous-ap-as-wireless-bridge/
    Regards
    Don't forget to rate helpful posts

  • TS1627 I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc.  I updated to iTunes 11.1.4.62 a few days ago.  Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subje

    I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc.  I updated to iTunes 11.1.4.62 a few days ago.  Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subject. Grateful for any help.

    You might have better luck in the iTunes for Windows community. I'll ask the hosts to relocate your post.
    iTunes for Windows

  • Who can help me :)--a problem with java program(reset problem in java )

    I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and the 4 widgets listed above should show values that
    correspond to the black square.The code like this,first one is shapes:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class shapes extends JFrame {
         private JPanel buttonPanel; // panel for buttons
         private DrawPanel myPanel;  // panel for shapes
         private JButton resetButton;
        private JComboBox colorComboBox;
         private JRadioButton circleButton, squareButton;
         private ButtonGroup radioGroup;
         private JCheckBox filledButton;
        private JSlider sizeSlider;
         private boolean isShow;
         private int shape;
         private boolean isFill=true;
        private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
                                   "green", "lightgray", "magenta", "orange",
                                   "pink", "red", "white", "yellow"};   // color names list in ComboBox
        private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                              Color.gray, Color.green, Color.lightGray, Color.magenta,
                              Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
         public shapes() {
             super("Draw Shapes");
             // creat custom drawing panel
            myPanel = new DrawPanel(); // instantiate a DrawPanel object
            myPanel.setBackground(Color.white);
             // set up resetButton
            // register an event handler for resetButton's ActionEvent
            resetButton = new JButton ("reset");
             resetButton.addActionListener(
              // anonymous inner class to handle resetButton events
                 new ActionListener() {
                       // draw a black filled square shape after clicking resetButton
                     public void actionPerformed (ActionEvent event) {
                             // call DrawPanel method setShowStatus and pass an parameter
                          // to decide if show the shape
                         myPanel.setShowStatus(true);
                             isShow = myPanel.getShowStatus();
                             shape = DrawPanel.SQUARE;
                         // call DrawPanel method setShape to indicate shape to draw
                             myPanel.setShape(shape);
                         // call DrawPanel method setFill to indicate to draw a filled shape
                             myPanel.setFill(true);
                         // call DrawPanel method draw
                             myPanel.draw();
                             myPanel.setFill(true);
                             myPanel.setForeground(Color.black);
                   }// end anonymous inner class
             );// end call to addActionListener
            // set up colorComboBox
            // register event handlers for colorComboBox's ItemEvent
            colorComboBox = new JComboBox(colorNames);
            colorComboBox.setMaximumRowCount(5);
            colorComboBox.addItemListener(
                 // anonymous inner class to handle colorComboBox events
                 new ItemListener() {
                     // select shape's color
                     public void itemStateChanged(ItemEvent event) {
                         if(event.getStateChange() == ItemEvent.SELECTED)
                             // call DrawPanel method setForeground
                             // and pass an element value of colors array
                             myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
                        myPanel.draw();
                }// end anonymous inner class
            ); // end call to addItemListener
            // set up a pair of RadioButtons
            // register an event handler for RadioButtons' ItemEvent
             squareButton = new JRadioButton ("Square", true);
             circleButton = new JRadioButton ("Circle", false);
             radioGroup = new ButtonGroup();
             radioGroup.add(squareButton);
             radioGroup.add(circleButton);
            squareButton.addItemListener(
                // anonymous inner class to handle squareButton events
                new ItemListener() {
                       public void itemStateChanged (ItemEvent event) {
                           if (isShow==true) {
                                 shape = DrawPanel.SQUARE;
                                 myPanel.setShape(shape);
                                 myPanel.draw();
                   }// end anonymous inner class
             );// end call to addItemListener
             circleButton.addItemListener(
                   // anonymous inner class to handle circleButton events
                new ItemListener() {
                       public void itemStateChanged (ItemEvent event) {
                             if (isShow==true) {
                                 shape = DrawPanel.CIRCLE;
                                 myPanel.setShape(shape);
                                 myPanel.draw();
                             else
                                 System.out.println("Please click Reset button first");
                   }// end anonymous inner class
             );// end call to addItemListener
             // set up filledButton
            // register an event handler for filledButton's ItemEvent
            filledButton = new JCheckBox("Filled", true);
             filledButton.addItemListener(
              // anonymous inner class to handle filledButton events
            new ItemListener() {
                  public void itemStateChanged (ItemEvent event) {
                    if (isShow==true) {
                            if (event.getStateChange() == ItemEvent.SELECTED) {
                                  isFill=true;
                                  myPanel.setFill(isFill);
                                  myPanel.draw();
                            else {
                                isFill=false;
                                  myPanel.setFill(isFill);
                                  myPanel.draw();
                    else
                        System.out.println("Please click Reset button first");
              }// end anonymous inner class
             );// end call to addItemListener
            // set up sizeSlider
            // register an event handler for sizeSlider's ChangeEvent
            sizeSlider = new JSlider(SwingConstants.HORIZONTAL, 0, 300, 100);
            sizeSlider.setMajorTickSpacing(10);
            sizeSlider.setPaintTicks(true);
            sizeSlider.addChangeListener(
                 // anonymous inner class to handle sizeSlider events
                 new ChangeListener() {
                      public void stateChanged(ChangeEvent event) {
                          myPanel.setShapeSize(sizeSlider.getValue());
                             myPanel.draw();
                 }// end anonymous inner class
             );// end call to addChangeListener
            // set up panel containing buttons
             buttonPanel = new JPanel();
            buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
             buttonPanel.add(resetButton);
             buttonPanel.add(filledButton);
            buttonPanel.add(colorComboBox);
            JPanel radioButtonPanel = new JPanel();
            radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
            radioButtonPanel.add(squareButton);
            radioButtonPanel.add(circleButton);
            buttonPanel.add(radioButtonPanel);
            // attach button panel & draw panel to content panel
            Container container = getContentPane();
            container.setLayout(new BorderLayout(10,10));
            container.add(myPanel, BorderLayout.CENTER);
             container.add(buttonPanel, BorderLayout.EAST);
            container.add(sizeSlider, BorderLayout.SOUTH);
            setSize(500, 400);
             setVisible(true);
         public static void main(String args[]) {
             shapes application = new shapes();
             application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    }second one is drawpanel:
    import java.awt.*;
    import javax.swing.*;
    public class DrawPanel extends JPanel {
         public final static int CIRCLE = 1, SQUARE = 2;
         private int shape;
         private boolean fill;
         private boolean showStatus;
        private int shapeSize = 100;
        private Color foreground;
         // draw a specified shape
        public void paintComponent (Graphics g){
              super.paintComponent(g);
              // find center
            int x=(getSize().width-shapeSize)/2;
              int y=(getSize().height-shapeSize)/2;
              if (shape == CIRCLE) {
                 if (fill == true){
                     g.setColor(foreground);
                      g.fillOval(x, y, shapeSize, shapeSize);
                else{
                       g.setColor(foreground);
                    g.drawOval(x, y, shapeSize, shapeSize);
              else if (shape == SQUARE){
                 if (fill == true){
                     g.setColor(foreground);
                        g.fillRect(x, y, shapeSize, shapeSize);
                else{
                        g.setColor(foreground);
                    g.drawRect(x, y, shapeSize, shapeSize);
        // set showStatus value
        public void setShowStatus (boolean s) {
              showStatus = s;
         // return showstatus value
        public boolean getShowStatus () {
              return showStatus;
         // set fill value
        public void setFill(boolean isFill) {
              fill = isFill;
         // set shape value
        public void setShape(int shapeToDraw) {
              shape = shapeToDraw;
        // set shapeSize value
        public void setShapeSize(int newShapeSize) {
              shapeSize = newShapeSize;
        // set foreground value
        public void setForeground(Color newColor) {
              foreground = newColor;
         // repaint DrawPanel
        public void draw (){
              if(showStatus == true)
              repaint();
    }If any kind people who can help me.
    many thanks to you!

    4 widgets???
    maybe this is what you mean.
    add this inside your actionPerformed method for the reset action
    squareButton.setSelected(true);
    colorComboBox.setSelectedIndex(0);
    if not be more clear in your post.

  • My phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
    http://support.apple.com/kb/ht1414
    Do not restore from backup.

  • A problem with java program(reset problem in java GUY)

    I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and the 4 widgets listed above should show values that
    correspond to the black square.
    import java.awt.*;
    import javax.swing.*;
    public class DrawPanel extends JPanel {
         public final static int CIRCLE = 1, SQUARE = 2;
         private int shape;
         private boolean fill;
         private boolean showStatus;
        private int shapeSize = 100;
        private Color foreground;
         // draw a specified shape
        public void paintComponent (Graphics g){
              super.paintComponent(g);
              // find center
            int x=(getSize().width-shapeSize)/2;
              int y=(getSize().height-shapeSize)/2;
              if (shape == CIRCLE) {
                 if (fill == true){
                     g.setColor(foreground);
                      g.fillOval(x, y, shapeSize, shapeSize);
                else{
                       g.setColor(foreground);
                    g.drawOval(x, y, shapeSize, shapeSize);
              else if (shape == SQUARE){
                 if (fill == true){
                     g.setColor(foreground);
                        g.fillRect(x, y, shapeSize, shapeSize);
                else{
                        g.setColor(foreground);
                    g.drawRect(x, y, shapeSize, shapeSize);
        // set showStatus value
        public void setShowStatus (boolean s) {
              showStatus = s;
         // return showstatus value
        public boolean getShowStatus () {
              return showStatus;
         // set fill value
        public void setFill(boolean isFill) {
              fill = isFill;
         // set shape value
        public void setShape(int shapeToDraw) {
              shape = shapeToDraw;
        // set shapeSize value
        public void setShapeSize(int newShapeSize) {
              shapeSize = newShapeSize;
        // set foreground value
        public void setForeground(Color newColor) {
              foreground = newColor;
         // repaint DrawPanel
        public void draw (){
              if(showStatus == true)
              repaint();
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class shapes extends JFrame {
         private JPanel buttonPanel; // panel for buttons
         private DrawPanel myPanel;  // panel for shapes
         private JButton resetButton;
        private JComboBox colorComboBox;
         private JRadioButton circleButton, squareButton;
         private ButtonGroup radioGroup;
         private JCheckBox filledButton;
        private JSlider sizeSlider;
         private boolean isShow;
         private int shape;
         private boolean isFill=true;
        private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
                                   "green", "lightgray", "magenta", "orange",
                                   "pink", "red", "white", "yellow"};   // color names list in ComboBox
        private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
                              Color.gray, Color.green, Color.lightGray, Color.magenta,
                              Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
         public shapes() {
             super("Draw Shapes");
             // creat custom drawing panel
            myPanel = new DrawPanel(); // instantiate a DrawPanel object
            myPanel.setBackground(Color.white);
             // set up resetButton
            // register an event handler for resetButton's ActionEvent
            resetButton = new JButton ("reset");
             resetButton.addActionListener(
              // anonymous inner class to handle resetButton events
                 new ActionListener() {
                       // draw a black filled square shape after clicking resetButton
                     public void actionPerformed (ActionEvent event) {
                             // call DrawPanel method setShowStatus and pass an parameter
                          // to decide if show the shape
                         myPanel.setShowStatus(true);
                             isShow = myPanel.getShowStatus();
                             shape = DrawPanel.SQUARE;
                         // call DrawPanel method setShape to indicate shape to draw
                             myPanel.setShape(shape);
                         // call DrawPanel method setFill to indicate to draw a filled shape
                             myPanel.setFill(true);
                         // call DrawPanel method draw
                             myPanel.draw();
                             myPanel.setFill(true);
                             myPanel.setForeground(Color.black);
                   }// end anonymous inner class
             );// end call to addActionListener
            // set up colorComboBox
            // register event handlers for colorComboBox's ItemEvent
            colorComboBox = new JComboBox(colorNames);
            colorComboBox.setMaximumRowCount(5);
            colorComboBox.addItemListener(
                 // anonymous inner class to handle colorComboBox events
                 new ItemListener() {
                     // select shape's color
                     public void itemStateChanged(ItemEvent event) {
                         if(event.getStateChange() == ItemEvent.SELECTED)
                             // call DrawPanel method setForeground
                             // and pass an element value of colors array
                             myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
                        myPanel.draw();
                }// end anonymous inner class
            ); // end call to addItemListener
            // set up a pair of RadioButtons
            // register an event handler for RadioButtons' ItemEvent
             squareButton = new JRadioButton ("Square", true);
             circleButton = new JRadioButton ("Circle", false);
             radioGroup = new ButtonGroup();
             radioGroup.add(squareButton);
             radioGroup.add(circleButton);
            squareButton.addItemListener(
                // anonymous inner class to handle squareButton events
                new ItemListener() {
                       public void itemStateChanged (ItemEvent event) {
                           if (isShow==true) {
                                 shape = DrawPanel.SQUARE;
                                 myPanel.setShape(shape);
                                 myPanel.draw();
                   }// end anonymous inner class
             );// end call to addItemListener
             circleButton.addItemListener(
                   // anonymous inner class to handle circleButton events
                new ItemListener() {
                       public void itemStateChanged (ItemEvent event) {
                             if (isShow==true) {
                                 shape = DrawPanel.CIRCLE;
                                 myPanel.setShape(shape);
                                 myPanel.draw();
                             else
                                 System.out.println("Please click Reset button first");
                   }// end anonymous inner class
             );// end call to addItemListener
             // set up filledButton
            // register an event handler for filledButton's ItemEvent
            filledButton = new JCheckBox("Filled", true);
             filledButton.addItemListener(
              // anonymous inner class to handle filledButton events
            new ItemListener() {
                  public void itemStateChanged (ItemEvent event) {
                    if (isShow==true) {
                            if (event.getStateChange() == ItemEvent.SELECTED) {
                                  isFill=true;
                                  myPanel.setFill(isFill);
                                  myPanel.draw();
                            else {
                                isFill=false;
                                  myPanel.setFill(isFill);
                                  myPanel.draw();
                    else
                        System.out.println("Please click Reset button first");
              }// end anonymous inner class
             );// end call to addItemListener
            // set up sizeSlider
            // register an event handler for sizeSlider's ChangeEvent
            sizeSlider = new JSlider(SwingConstants.HORIZONTAL, 0, 300, 100);
            sizeSlider.setMajorTickSpacing(10);
            sizeSlider.setPaintTicks(true);
            sizeSlider.addChangeListener(
                 // anonymous inner class to handle sizeSlider events
                 new ChangeListener() {
                      public void stateChanged(ChangeEvent event) {
                          myPanel.setShapeSize(sizeSlider.getValue());
                             myPanel.draw();
                 }// end anonymous inner class
             );// end call to addChangeListener
            // set up panel containing buttons
             buttonPanel = new JPanel();
            buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
             buttonPanel.add(resetButton);
             buttonPanel.add(filledButton);
            buttonPanel.add(colorComboBox);
            JPanel radioButtonPanel = new JPanel();
            radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
            radioButtonPanel.add(squareButton);
            radioButtonPanel.add(circleButton);
            buttonPanel.add(radioButtonPanel);
            // attach button panel & draw panel to content panel
            Container container = getContentPane();
            container.setLayout(new BorderLayout(10,10));
            container.add(myPanel, BorderLayout.CENTER);
             container.add(buttonPanel, BorderLayout.EAST);
            container.add(sizeSlider, BorderLayout.SOUTH);
            setSize(500, 400);
             setVisible(true);
         public static void main(String args[]) {
             shapes application = new shapes();
             application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    }Many thanks

    Who is this Java guy anyway?

  • Camera problem in 501 after reset

    Please help me.
    I updated my phone(asha 501) a few days ago. I reset my phone today. After reset when i capture an image the preview goes to the left. But when i open gallery it's vanished. I checked the files also but didn't find the photo. For every image after reset this case is happening.
    Please give me sollution.
    Solved!
    Go to Solution.

    I solved my problem myself. I reset my phone again and restored the backups again. Now i can see the images in the gallery.

Maybe you are looking for