Problems in SAP script : Please help

Hi Friends:
I've got a ticket in SAP script & need to do the following modifications:
1. In the SAP script, on the bottom side there is a cheque no. I want to print the chequq no. in MICR format. Right now its coming into normal format. Please advise me in details as to what to do?
2. How to convert the date format from DD.MM.YYYY to DDMMYYYY.
3. There is some amount getting printed on the cheque. e.g $50.00 The requirement is like that after '$' sign, 50.00 should come in a box.Please advise as how to do that.
4. There is some gap coming in between the '$' & the amount 50.00. Once that 50.00 will be in Box, as per point 4, how to reduce the gap.
5. The "$" sign is not getting printed correctly. The line which is striking vertically the 'S', is appearing broken. Please advise as how to resolve the same.
Hi experts, please help me on the above points. Suitable points will be rewarded.
Thanks:
Gaurav

Hi there.
Question 1:
Use font MICR_C for MICR CMC-7 or MICR_E for MICR E-13B
http://help.sap.com/saphelp_nw04/helpdata/en/90/78f078030211d399b90000e83dd9fc/frameset.htm
Question 2:
/: SET DATE MASK = 'DDMMYYYY'
http://help.sap.com/saphelp_nw04/helpdata/en/d1/8034d4454211d189710000e8322d00/frameset.htm
Question 3:
/E BOX_ELEMENT
/: POSITION WINDOW
/: POSITION YORIGIN &Y& LN
/: SIZE HEIGHT &HEIGHT& LN
/: BOX FRAME 10 TW
/: BOX XPOS '0.0' CM WIDTH 0 TW FRAME 10 TW
Question 4:
&symbol(C)&
http://help.sap.com/saphelp_nw04/helpdata/en/d1/8034d4454211d189710000e8322d00/frameset.htm
Question 5:
See SAP Note 129581.
Best regards.
Valter Oliveira.
Edited by: Valter Oliveira on May 30, 2008 4:42 PM

Similar Messages

Quantity field conversion problem in SAP script

Hi experts,
I have problem with sap script quantity field conversion.
In purchase order the actual value of field( MDPM-ERFMG) is 3,500.
But in Print preview it is showing only 3.5
Any one Please help me in this problem
thanks in advance
murali

Hello,
check this:
Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235
REgards,
Vasanth

Printing problem for SAP Script

Dear Friends,
I am facing strange problem for SAP Script. In the billing document output the sold to party and ship to party address are displaying. When user print the billing document on laser printer it print the Country for Sold to and Ship to. But when it print the same billing document on normal printer (other than laser) the Sold to country not printing.
The print preview of billing document in SAP correctly display country for Sold-to and Ship-to.
I have recently make changes in the SAP Script form (Address window) to display country for Ship-to which was never displayed before. I have added FROMCOUNTRY option after COUNTRY in address window. COUNTRY will be Ship-to and FROMCOUNTRY will be VBDKR-SLAND.
Can any one help me to solve this problem.
Regards
Nilesh Shete

Used custom address print option instead of using ADDRESS

TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
Try a different port on the computer.
Does the iphone beep when u plug it up. ?
Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
Delete the apple mobile device from your computer.
Upgrade itunes to newest version.
Is you USB cord defective ?
Any USB 3.0 on your system ? .
Delete or Disable any antivirus program on your computer ?
I will tell u the problem is your computer not the phone.
We could do this for hours.

HT201363 Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569)

Developer 6 Timer Problem... Please help

Hi all,
I have installed Developer 6(Oracle Product) on my system. I am facing a strange problem whenever I try to use Create_Timer built in. The cursor moves to starting of the Item being modified as soon as the space bar is pressed (timed for timer expiration). If I remove the Built-in the problem is resolved.
Please help urgently.
Regards
Anand

Upgrade to the latest patch and the problem shoudl go away - this issue was fixed I think in 6.0.8.13+
You can also try setting Keey Cursor position to Yes on the item.

HT1926 i've tried so many times but the problem still exists! please help!!

i've tried so many times but the problem still exists! please help!!

Could you describe what your problem is, please?

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX (Please Help)

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX
Please Help to solve...

Hi Ahmed,
In iTunes, go to the Store in the left menu, select iTunes Store, wehn it opens, make sure you are on the home screen (icon of a house in the menu bar) and from the righthand side, select Account.
Next you will see all of your account information. Just a little don, you will find: Apple ID overview, there it says, Authorised computers; click on the button to deauthorise.
And you should be done.
Grtz, Carl.

DVD Audio and Subtitle script Please HELP

Subtitle Audio Scripts Please Help
Posted: Sep 3, 2006 8:04 PM
I need to write a script that does the following:
1st I have the end user choose if they want subtitles on or off and then both the buttons will default for the user to chose a language choice. So I need a script that will play just audio streams and a script that will play audio with the same language subtitle. Also if the user just pushes the language button I need the script it to default to play just that language...
Here is what I have scripted already please tell me where my mistake is:
Button Command
Subtitles
On mov GPRM 0,0
Jump Special Features: English
Off mov GPRM 0,1
Jump Special Features: English
English 1. mov GPRM 0,2
2. Set System stream Au(Audio Stream 1) if (0=0)
3. Set System Stream St(Subtitle Stream 1)(ON) if (0=0)
4. Goto 11 if (GPRM 0=0)
5. Set System stream Au(Audio Stream 1) if (0=1)
6. Set System Stream St(Subtitle Stream 1)(Off) if (0=1)
7. Goto 11 if (GPRM 0=1)
8. Set System stream Au(Audio Stream 1) if (0=2)
9. Set System Stream St(Subtitle Stream 1)(Off) if (0=2)
10. Goto 11 if (GPRM 0=2)
11. Jump JOFDVD:Start
12. Exit
All my language scripts will be similar just with different audio and sub streams.
Help Please-
Ryan-

Hi There
I think your error is in the first line of your script.
You're using GPRM 0 to set your subtitle condition and when you press enter on your english button your first line says
1. mov GPRM0,2
I'm assuming you want to use this first comand to set your languange condition so you should use GPRM 1 (or more) - at this stage all you're doing is removing the subtitle condition set by your earlier script.
Good luck
Cheers
B

No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
https://discussions.apple.com/thread/2475631

Problem with SAP Script FAX output

Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

Problem in SAP-Script

Hi All,
I am creating one report form using SAP Script, it is a replacement of standard SAP Script and which uses standard driver program. I am getting one dump while running SAP Script, it shows like "variable with name 'XXX' has not been used in so and so window".
In that window there is a code block like,
/: IF XXX == 'yes'
/: ENDIF
As I dont want this block I have commented this like,
/* IF XXX == 'yes'
/* ENDIF
Please let me know how to overcome this short-dump and provide solution why such dump is comming?
<<removed by moderator>>
Edited by: kishan P on Sep 13, 2010 4:19 PM

Hi,
This is one of the problem of Standard SAP Script driver program, we can over come easily, we no need to comment anything rather do follow the code you can easily solve your issue, I also face the same issue previously.
your code is,
/: IF XXX = 'Yes'
/: ENDIF
like this means, then change the code like this,
/: IF 1 = 2
/: IF XXX = 'Yes'
/: ENDIF
/: ENDIF
here, you didnt write any comment, also the code will never execute.
Why we are doing this means, driver program expects particular variable has to be used in particular window, but it never expects that variable has to be executed. By using this code you can use the variable also it will never be executed.
Hope it will be helpful. If you find any other solution please let me know, Thank you:)

Problem in sap-script, page count when trigger new page.

Hi to all,
Please help on my sap-script problem. When I trigger new-page the page count should continue.
Ex: I have total of 2 pages, the second page is trigger in new-page. the page count of 2nd page should show as Page 2 of 2. but it shows on me is still Page 1 of 2.
my command of new-page is in the zprogram. using function command_control
thanks to all,
I will reward points.
Booh.

Hi ,
use &PAGE& of &SAPSCRIPT-formpages&
IF Found Helpfull.
Do Reward.
Regards.
Eshwar

Problem in sap script check printing with EPSON FX890 printer

Hi
I am trying to print a check through F-58 using a script.
We have a new EPSON FX890 dot matrix printer, But when I fire a check the the formatting of the check is not proper. The alignment is never the same as given in the SAP script. this could a problem with the printer set up and configuration in SAP. Could anybody please give me some inputs on what needs to be done. its Urgent. Can anybody give me what needs to be done and also guide me with Print control commands in SAP scripts
Thanks,

Hi,
Here is some steps you should follow for scripts printout.
1. Validate the drivers used in SAP (Tcode SPAD)
2. Are you printing through a print server or directly to the printer
3. If it is througha print server like windows, you should validate to have the right driver installed for that printer.
4. Validate on the printer the default setting. If the script doesn't sent the proper font or setup, it will print using the last setup sent to the printer.
So if somebody used work and print a specific document with different setting, some time the setting stays for the SAP report.
To validate the setup of the printer, just turn off and on the printer before sending the SAP form. That should help to see if the setup has been changed by another program.
I hope those simple steps will help to solve your problem.
Reward if helpfull...
Cheers,
Rakesh.

HI, Alignment Problem in SAP Script

Hi Friends
I am working on SAP Script, I have the problem alignment, in the first row I need to show 8 values,
among them all the times length is not same, so my script is not displaying in proper alignment,
I have tried with all the ways which I known, specifying the length, and using (*), but still it is not
coming properly, is there any method to specify the position exactly like as in reposrting.
Please help me in this, this is very urgent.
Thanks and Regards
Praveeb

Hi Nagesh
Thanks for your reply,
I am displaying in the first row, here I am mentioning the filed and lenght of the field
1) Date(10)
2) Reference No(16), .
3) Fiscal Year(4),
4) Internal Reference(3),
5) Item Text (50)
6) Due Date (10)
7) Original Currency(3)
8) Amount (18).
In the field item text length is vary from each entry, it wont be static all the times, if one customer having having 10 records, all ten line items are not coming in the proper order, after displaying the item text, remaining fields are running out from the alignment. I am using tab space as 2 characters, I kept even so many conditions on the item text lenght, but still there are problems. I tried with specifying the length in
the script for the symbols also no use and I passed (*), this is also not working properly. Here I am sending the code of my script. Please have a look and give me a suggestion please.
bold Heading bold
Date,,,, ACR Ref No,,,, UW- Inst- Cedant,,,,,,,,,,
     ,,,,,,,,,,,,Due Date,,,, Original-,,,,Amount
     &wa_final-date(10)&,,&wa_final-xblnr(16)&,,&w_year(4)&,,
     &wa_final-xref1(3)&,,&wa_final-sgtxt(50)&
     ,,,,,,,,&wa_final-zfbdt(10)&,,,,&wa_final-waers(6)&,,,,&w_amt3(18)&
       &wa_final-date(*)&,,&wa_final-xblnr(*)&,,&w_year(4)&,,
     &wa_final-xref1(3)&,,&wa_final-sgtxt(*)&
     ,,,,,,,,&wa_final-zfbdt(*)&,,,,&wa_final-waers(*)&,,,,&w_amt3(*)&

Problems in SAP script : Please help

Similar Messages

Maybe you are looking for