Problems in scanning using MX 922

I want to scan several pages and have the result in a single file using a Canon Pixma MX922

GregH,
My Image Garden is available for download from Canon's web site. Please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA MX922 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Click Software.
5. Click on My Image Garden.
6. If you agree, please select the checkbox next to " I have read and agree to the terms of the Disclaimer and wish to continue with the download".
7. Click the Donwload button.
8. When the Save As box comes up, click Save.
9. Once the download is complete, close all windows.
10. Open your Downloads folder and double click [mig_-win-3_0_0-ea31_2.exe].
Files will extract.
Follow the prompts and the installation will complete.
Once installed, please use My Image Garden to scan your multiple page document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Problem with scanning using OCX.

HI GUYS,
I AM USING ORACLE FORMS 6I,AND I HAVE A SCANNING
SCREEN THAT IMPLEMENTED USING ole PACKAGE&ocx ,NOW MY QUESTION IS IF CLICK THE SCAN BUTTON IT WILL SHOW ME THE SCANNED FILE IN THE ocx
BUT IF THERE IS NO PAPER IT WORK THE SAME.
NO MY QUESTION IS I NEED A CONDITION IN CASE IF THE SCANNER IWTH NO PAPER IT WILL NO WORK AND IT WILL GIVE A MESSAGE FROM THE ORACLE IS IT POSSIBLE ,
THIS IS MY CODE ON THE BUTTON:
declare
my_ole OLEOBJ;
dummy number;
begin
forms_ole.activate_server('SCAN');
my_ole := forms_ole.get_interface_pointer('SCAN');
if Imaging_DImgScan.ScannerAvailable(my_ole) <> 0 then
     --dummy := Imaging_DImgScan.ShowSelectScanner(my_ole);
     dummy := Imaging_DImgScan.StartScan(my_ole);
else
message('No Scanner Detected, Please Contact The Administrator !!!');
message('No Scanner Detected, Please Contact The Administrator !!!');
end if;
end;
Regards,

Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
   http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I still get a firefox security alert that my system affected by numerous virus attack even after I performed a full scan using microsoft security essential. what is the problem?

I get a firefox security alert that my system affected by numerous virus attack. I performed a full scan using microsoft security essential immediately but same message still pop up after that even though no virus was found during the scan.

You may be visiting a web site that has been infected or is hosting malware.<br />
You should never respond unrequested pop-ups that try to persuade you to download and install software.<br />
Doing that is the way to get malware because no decent company would use such methods to inform you about that.<br />
You only saw an animation and not a real scan.<br />

Since I upgraded to OS X 10.9.5 I cannot scan using my HP Photosmart 5510 printer. Is there a patch available to fix the problem?

I cannot scan using my HP Photosmart 5510 series wireless printer since I upgraded to OS X 10.9.5. Is there a fix?

Try resetting the printing system.
OS X Mavericks: Reset the printing system
Also try Applications/Image Capture or VueScan.
VueScan
VueScan FAQ

Problem with scanning and memory usage

I'm running PS CS3 on Vista Home Premium, 1.86Ghz Intel core 2 processor, and 4GB RAM.
I realise Vista only sees 3.3GB of this RAM, and I know Vista uses about 1GB all the time.
Question:
While running PS, and only PS, with no files open, I have 2GB of RAM, why will PS not let me scan a file that it says will take up 300Mb?
200Mb is about the limit that it will let me scan, but even then, the actual end product ends up being less than 100Mb. (around 70mb in most cases)I'm using a Dell AIO A920, latest drivers etc, and PS is set to use all avaliable RAM.
Not only will it not let me scan, once a file I've opened has used up "x" amount of RAM, even if I then close that file, "x" amount of RAM will STILL be unavaliable. This means if I scan something, I have to save it, close PS, then open it again before I can scan anything else.
Surely this isn't normal. Or am I being stupid and missing something obvious?
I've also monitored the memory usage during scanning using task manager and various other things, it hardly goes up at all, then shoots up to 70-80% once the 70ishMb file is loaded. Something is up because if that were true, I'd actually only have 1Gb of RAM, and running Vista would be nearly impossible.
It's not a Vista thing either as I had this problem when I had XP. In fact it was worse then, I could hardly scan anything, had to be very low resolution.
Thanks in advance for any help

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

I can no longer scan using HP d110 after Mavericks

I have tried so many work-arounds to fix this issue! I've read countless threads, deleted and re-installed drivers (although according to mac and hp, this wasn't necessary), I've tried scanning using the Print/Scan utility, Image Capture, Preview and Webscan and NOTHING works. The scan begins (so I know that the printer and communicating) but then I get an error message that says "An error occurred while communicating with the scanner."
My printer works fine. But scan - which worked just fine before installing Mavericks - no longer works. Help!

Hi urbanfitchick,
I understand that you are getting a scan error. I will do my best to help you resolve this issue in Mavericks. I suggest trying to do a copy from the printer, this is to establish that the scan function is working properly on the printer. If you cannot do a copy then there is a problem with the scanner hardware and we will have to address that issue first. If there is no problems doing the copy then I recommend that you power cycle the network.
How to power cycle network
Follow these steps to reset your HP printer, your wireless router, and your computer.
1.Press the Power button on the HP printer to turn it off.
2.Disconnect the power cord from the rear of the HP printer.
3.Disconnect the power cord from the wireless router.
4.Turn off the computer.
5.Wait 30 seconds.
6.Reconnect the power cord to the wireless router.
7.Wait 30 seconds, or until the router is fully on and ready.
8.Turn the computer back on.
9.Wait for the computer to reload.
10.Reconnect the power cord to the rear of the HP printer.
11.Turn the printer back on.
Then reset the Printing System
Resetting the Printing System in Mac
Open System Preferences > Printers & Scanners > Print
Hold down the Option key while clicking the "-" (Remove printer) button.
If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu
Once you have the printer installed here is a document on How to Scan: OS X v10.9
LINK: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=4023246
I am including this link for other options for scanning as well.
LINK: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Officejet-7310-All-i n-One/m-p/3081523#M73430
I hope this helps, let me know.
Thank you,
Advance 23
I work on behalf of HP

Problem with scanning - printer display shows "Server connection error"

My printer has been working great and I have had no problems with scanning. But two days ago, all of a succen I rec'd message "server connection error". I tried to send to email as well as computer. Got the same message. As usual, I don't recall any action on my part that could have caused this problem. The copying and printing functions work fine. Detailed advice to someone technically challenged will be much appreciated. Thank you.

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
hope someone can help me out.
I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
thnx in advance for the help

I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
Any help would be appreciated.

Problem with scanning document in PDF format to computer

has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525 e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
This question was solved.
View Solution.

Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

LaserJet Pro 200 colour MFP M27nw - problem to scan from ADF

I seem a new LaserJet Pro 200 colour MFP M27nw running on a PC with Windows 8 and have just realised that whenever I scan from the Automatic Document Feeder (ADF), no output file is generated. The original document is drawn into the document feeder successfully and the printer display reports that the scan is ready. However, no file containing the scan is generated. This happens irrespective of whether I send the output to USB or to email and irrespective of whether the original document has single or multiple sheets.
Interestingly, the ADF works well if I try to produce hardcopies, that is, the printer is able to drawn in the sheets o fthe original document from the ADF (be it single or multiple sheets), and produce hardcopies of the original successfully. Moreover I have no problem to scan single or multiple sheet documents when the original document is loaded through the Flatbed Scanner rather than the Document Feeder Scanner.
Appreciate any help. Thanks
Stephen
This question was solved.
View Solution.

HI @StephenScerri ,
I see by your post that when you scan from the ADF there is no output file containing the scan that is generated to USB or to email. You can copy from the ADF and scan successfully from the flatbed. I would like to help.
Is this printer the Laserjet Pro 200 MFP M127nw?
I have provided a document for How to Scan: Windows 8.
When you scan from the ADF, do you get a scan preview from the computer software?
Or is it previewing the scan but not saving it to the computer?
What software are you using to scan with?
Try saving the scan to the computer, if you are getting a preview, to see if it will save the scan there.
Please provide in detail the results if you are still having issues.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob

Scans using the Printer/Scanner utility in MAC OS 10.9 disappear.

Hello,
I am having new issues with scanning documents on my HP Photosmart Premium Series C309 All-in-One printer/scanner.
I have been able to successfully scan and save documents, but just recently, something happened. It appears the scanner is successfully scanning the documents, and I am able to inpput my "save to" information, but the documents are now disappearing into cyber space.
I am operating wirelessly via a Mac Book Pro with OS 10.9 (I believe).
Can someone guide me to what is going wrong and what to do about it please? I've tried using the utilities and help available online and in my computer
Thanks,
Spirit Dancer

Hi Spirit Dancer,
You may scan using Image Capture or Preview, the HP Scan application for your printer is not intended for Mavericks and such save issues are expected.
Follow the workaround below to scan from your printer to Mac OS X 10.9:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&dlc=en&docname=c04028214&lc=en&jumpid=reg_r1002_uk...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When I scan using an HP ScanJet 8390 using Twain Driver in Acrobat 9

When I scan using an HP ScanJet 8390 using the Twain driver the scanned image comes in wrong.
Please see images.
HP 8390 using the Twain driver gives me this result.
HP 8390 using the NON Twain driver gives me the right size page. How come the Twain driver does not? It worked fine in Adobe 8.

Hi,
The 3210 model only supports 35mm negatives, it does not support any larger negatives.
You may find its Scan Specifications listed below:
http://support.hp.com/us-en/document/c00408357
Also the 3970 only support 35mm negative scanning, tiy may find its Transparent Materials Adapter (TMA) specifications listed below:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00005741
I afraid that 110mm negatives are not supported by any of the scanners.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How fix blank lines on scans using MF5770

how fix blank lines on scans using MF5770. Already restarted Win 7 computer and MF5770. Using Windows fax and scan. Several months of successful use before this problem began last couple weeks. 9/2014 Thnks for any help

Patrice,
Thanks for your reply and questions. See my responses in the body of your text pasted below
So that we can better assist you, how is the printer connected? Is it connected directly to the computer with a USB cable,YES ITS CONNECTED BY A USB CABLE LESS THAN 10' LONG FROM THE BACK OF THE MF 5770 TO A USB PORT ON THE BACK OF MY DESKTOP COMPUTER or with a LAN cable to a router? If it is connected with a USB cable, how long is the cable, and are there any devices,NO DEVICES such as a USB hub or extender, connected between the printer and the computer? Finally, which version of Windows 7 are you running on your computer? Is it the 32-bit or 64-bit version? 64 BIT VERSION SERVICE PACK 1 PROCESSOR AMD PHENOM II X4 810 2.61 GHz INSTALLED MEM 4 GB
Chip Hazel
[Mod note - removed personal information PER FORUM GUIDELINES]

Problem getting scan of pix from printer/scanner/fax machine

Long used P E to get pix scanned by printer/scanner/fax. Then I bought a slide scanner and installed, and PE brought in slides scanned by separate machine. Disconnected slide scanner. Now whenI try to get pix scanned by printer/scanner/fax, it says it "Can't find the slide scanner" and SHUTS DOWN. How can I reset PE to get the scanned pix from the printer/scanner/fax again. It has no trouble going to the printer/scanner/fax to print pix.
Cindi

Open Organizer and on the top menu click Edit à Preferences à Scanner
I tried the website and help searching for scan, I have had every PE since
2 and have 48,000 pix in my catalogue, so I'm pretty knowledgeable about
the program. I also searched under file. I usually go to Get photos and
thought it should give a choice under scanner there. Never thought to go to
Edit and Preferences.
In a message dated 3/14/2012 7:16:58 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Problem getting scan of pix from printer/scanner/fax machine
created by Brett N (http://forums.adobe.com/people/Brett+N) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4267751#4267751)

Problems in scanning using MX 922

Similar Messages

Maybe you are looking for