Problems in sound capture and JMF deployment

Hello:
I am new to JMF.
I made an applet using JDK 1.3 on JBuilder 5. This applet captures and plays audio. When I run it through JBuilder's IDE, it runs fine. But when I run it independently, the applet's GUI appears but sound recording doesnn't work. Remember that I have JRE1.4.2 and JMF2.1.1e installed on my machine.
When I installed JMF, I enabled the recording, and file writing options for an applet.
To further check the problem, I ran it through JMF debugger. There I found that it says that ,
<permission javax.sound.sampled.AudioPermission "record";> is not enabled.
To enable it I added this entry in java.policy. This allowed the audio capture to work.
But my question is,
1. Why isn't this entry present by default in java.policy?
2. Even one of my user entered this entry in java.policy, but was unable to capture audio.
3. I want my applet to be running with different users having different versions of JRE,JMF and browser settings. How can I do this, without asking my user to do anything? I simply want that when my user downloads this applet, I should provide him with some installation file that installs JMF as well as configures everything on the system in a way that he can use this applet easily.
Haven't you guys faced such problems in deploying JMF stuff?
I'll be grateful for any help.
Thanks
Jami

Hi.
I am facing very similar problems: it looks like deploying JMF with Java Applets is really a challange!
On my own test installation, if I enable audio capture and file writing for applets through the JMFRegistry, then I am able to record audio from my test applet, even when executed in the target web browser.
Nevertheless, how to deploy the applet in such a way clients won't be required to manually install JMF and enable audio capture and file writing through the JMFRegistry?
It looks like the JMF Customizer is able to produce a custom JAR also embedding user preferences for audio capture from applets and file writing , is this correct?
Any help would be greatly appreciated.
Regards,
Marco.

Similar Messages

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Problem with sound capture on a Packard Bell

Hello, recently I have acquired a Packard Bell EASYNOTE MX61-B-054PT notebook to replace my dead Asus. Everything is working quite well except for sound capture from the microphone.
There is a periodic noise that I can't get rid of (the noise I'm talking about isn't the normal background white noise). In the image you can see in the middle when I made some sound and to the left and to the right just silence (with the typical noise) and the samples that go to zero periodically.
I have tried adjusting buffer time and buffer size in asound.conf, I've tried adjusting the pci latency for the soundcard but nothing worked.
To make the the plugging and unplugging of headphones work properly I needed to add "options snd_hda_intel model=lenovo" to modprobe.conf although the same problem happens if I don't have any options.
Help please, I'd like to make this work properly so I can make calls.
Below is everything that might help anyone help me find out whats wrong.
$ lsmod
Module Size Used by
usb_storage 92736 0
joydev 11584 0
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 50672 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8460 3 snd_seq_dummy,snd_seq_oss,snd_seq
8139too 24964 0
ath_pci 245432 0
wlan 222448 1 ath_pci
ath_hal 250976 1 ath_pci
snd_pcm_oss 39840 0
snd_mixer_oss 16512 2 snd_pcm_oss
uvcvideo 56840 0
compat_ioctl32 3072 1 uvcvideo
i2c_piix4 9744 0
sdhci_pci 9088 0
8139cp 21248 0
ohci1394 30256 0
videodev 35584 1 uvcvideo
ieee1394 80452 1 ohci1394
arc4 3712 2
snd_hda_intel 368944 3
snd_pcm 70276 2 snd_pcm_oss,snd_hda_intel
v4l1_compat 16260 2 uvcvideo,videodev
mii 6528 2 8139too,8139cp
video 18064 0
sdhci 16900 1 sdhci_pci
snd_timer 21512 2 snd_seq,snd_pcm
ecb 4608 2
i2c_core 22420 1 i2c_piix4
psmouse 38288 0
crypto_blkcipher 17540 1 ecb
snd_page_alloc 9736 2 snd_hda_intel,snd_pcm
mmc_core 46620 1 sdhci
serio_raw 7172 0
k8temp 6144 0
ath5k 100480 0
mac80211 158876 1 ath5k
snd_hwdep 9220 1 snd_hda_intel
snd 53796 14 snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore 8160 2 snd
output 4608 1 video
cfg80211 25224 2 ath5k,mac80211
sg 28852 0
asus_laptop 17656 0
led_class 5508 2 ath5k,asus_laptop
ati_agp 8716 0
agpgart 30804 1 ati_agp
evdev 11296 8
thermal 17052 0
fan 6148 0
button 7824 0
battery 12036 0
ac 6020 0
cpufreq_ondemand 8588 1
powernow_k8 15236 1
freq_table 5632 2 cpufreq_ondemand,powernow_k8
processor 34732 2 thermal,powernow_k8
loop 16140 0
vboxdrv 66072 0
rtc_cmos 11424 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext3 126344 6
jbd 46100 1 ext3
mbcache 8708 1 ext3
sr_mod 16708 0
cdrom 35360 1 sr_mod
sd_mod 27160 8
usbhid 46016 0
hid 41856 1 usbhid
ff_memless 6664 1 usbhid
pata_atiixp 6656 0
ehci_hcd 35852 0
ohci_hcd 24976 0
ahci 30348 7
usbcore 134128 6 usb_storage,uvcvideo,usbhid,ehci_hcd,ohci_hcd
ata_generic 6788 0
pata_sis 12036 0
pata_acpi 6016 0
libata 153120 5 pata_atiixp,ahci,ata_generic,pata_sis,pata_acpi
scsi_mod 96460 5 usb_storage,sg,sr_mod,sd_mod,libata
dock 9616 1 libata
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 2400
01:00.1 Audio device: ATI Technologies Inc RV610 audio device [Radeon HD 2400 PRO]
06:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
07:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
$ lsusb
Bus 006 Device 003: ID 04f2:b066 Chicony Electronics Co., Ltd
Bus 006 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0001
Bus 001 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Bus 001 Device 001: ID 1d6b:0001
$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC660-VD Analog [ALC660-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC660-VD Analog [ALC660-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-64
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch
bogomips : 1596.49
clflush size : 64
power management: ts fid vid ttp tm stc 100mhzsteps
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-64
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch
bogomips : 1596.49
clflush size : 64
power management: ts fid vid ttp tm stc 100mhzsteps
$ cat /proc/interrupts
CPU0 CPU1
0: 24000 2826477 IO-APIC-edge timer
1: 84 4321 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
8: 0 85 IO-APIC-edge rtc0
9: 1753 156423 IO-APIC-fasteoi acpi
12: 22 2042 IO-APIC-edge i8042
14: 490 52009 IO-APIC-edge pata_atiixp
15: 0 0 IO-APIC-edge pata_atiixp
16: 1136 59115 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel
17: 0 15 IO-APIC-fasteoi ohci_hcd:usb2, ohci_hcd:usb4
18: 0 2 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb5
19: 0 990 IO-APIC-fasteoi ehci_hcd:usb6, ath, HDA Intel
20: 65 10130 IO-APIC-fasteoi eth0
21: 0 3 IO-APIC-fasteoi ohci1394
22: 134 17070 IO-APIC-fasteoi ahci, mmc0
NMI: 0 0 Non-maskable interrupts
LOC: 1863999 575326 Local timer interrupts
RES: 502318 406368 Rescheduling interrupts
CAL: 348 91 function call interrupts
TLB: 793864 661776 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 1
MIS: 0
$ dmesg
Linux version 2.6.27-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Fri Nov 14 09:33:13 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff98000 (usable)
BIOS-e820: 00000000bff98000 - 00000000bffa0000 (ACPI NVS)
BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data)
BIOS-e820: 00000000bffae000 - 00000000bfff0000 (ACPI NVS)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbff98 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 10000-15000
RAMDISK: 7ff26000 - 7ffef471
Allocated new RAMDISK: 00510000 - 005d9471
Move RAMDISK from 000000007ff26000 - 000000007ffef470 to 00510000 - 005d9470
ACPI: RSDP 000F8A40, 0014 (r0 ACPIAM)
ACPI: RSDT BFFA0000, 0048 (r1 PacBel PBNB0006 20071023 MSFT 97)
ACPI: FACP BFFA0200, 0084 (r2 102307 FACP1138 20071023 MSFT 97)
ACPI: DSDT BFFA0640, 95AC (r1 T12K0 T12K0001 1 INTL 20051117)
ACPI: FACS BFFAE000, 0040
ACPI: APIC BFFA0390, 005C (r1 102307 APIC1138 20071023 MSFT 97)
ACPI: MCFG BFFA03F0, 003C (r1 102307 OEMMCFG 20071023 MSFT 97)
ACPI: SLIC BFFA0430, 0176 (r1 PacBel PBNB0006 20071023 MSFT 97)
ACPI: ECDT BFFA05E0, 0054 (r1 102307 OEMECDT 20071023 MSFT 97)
ACPI: BOOT BFFA05B0, 0028 (r1 102307 BOOT1138 20071023 MSFT 97)
ACPI: OEMB BFFAE040, 006D (r1 102307 OEMB1138 20071023 MSFT 97)
ACPI: HPET BFFA9BF0, 0038 (r1 102307 OEMHPET 20071023 MSFT 97)
ACPI: SSDT BFFA9C30, 026E (r1 AMI POWERNOW 1 AMD 1)
2175MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00011000 - 00018000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
#4 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000510000 - 00005d9471] NEW RAMDISK ==> [0000510000 - 00005d9471]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x000bff98
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bff98
On node 0 totalpages: 786215
free_area_init_node: node 0, pgdat c03d8200, node_mem_map c1000200
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 552600 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c4000000 (gap: c0000000:3fb80000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780071
Kernel command line: root=/dev/disk/by-uuid/981e5590-5c73-43d6-92b3-dfaf002172fc resume=/dev/disk/by-uuid/76bba7cb-d1c1-4673-89f4-2466b88b4fb5 ro nohz=off
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2194.487 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3113496k/3145312k available (2147k kernel code, 30500k reserved, 844k data, 288k init, 2227808k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03f3000 - 0xc043b000 ( 288 kB)
.data : 0xc0318f96 - 0xc03ec320 ( 844 kB)
.text : 0xc0100000 - 0xc0318f96 (2147 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.84 BogoMIPS (lpj=7314956)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4390.89 BogoMIPS (lpj=7315039)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-64 stepping 02
Brought up 2 CPUs
System has AMD C1E enabled
Switch to broadcast mode on CPU1
Total of 2 processors activated (8781.74 BogoMIPS).
Switch to broadcast mode on CPU0
net_namespace: 832 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:12.0 reg 10 io port: [e800, e807]
PCI: 0000:00:12.0 reg 14 io port: [e400, e403]
PCI: 0000:00:12.0 reg 18 io port: [e000, e007]
PCI: 0000:00:12.0 reg 1c io port: [dc00, dc03]
PCI: 0000:00:12.0 reg 20 io port: [d800, d80f]
PCI: 0000:00:12.0 reg 24 32bit mmio: [febffc00, febfffff]
pci 0000:00:12.0: set SATA to AHCI mode
PCI: 0000:00:13.0 reg 10 32bit mmio: [febfe000, febfefff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [febfd000, febfdfff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [febfc000, febfcfff]
PCI: 0000:00:13.3 reg 10 32bit mmio: [febfb000, febfbfff]
PCI: 0000:00:13.4 reg 10 32bit mmio: [febfa000, febfafff]
PCI: 0000:00:13.5 reg 10 32bit mmio: [febff800, febff8ff]
pci 0000:00:13.5: supports D1
pci 0000:00:13.5: supports D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [b00, b0f]
PCI: 0000:00:14.1 reg 10 io port: [0, 7]
PCI: 0000:00:14.1 reg 14 io port: [0, 3]
PCI: 0000:00:14.1 reg 18 io port: [0, 7]
PCI: 0000:00:14.1 reg 1c io port: [0, 3]
PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
PCI: 0000:00:14.2 reg 10 64bit mmio: [febf4000, febf7fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
PCI: 0000:01:00.0 reg 14 io port: [8800, 88ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [fd8f0000, fd8fffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [fd8c0000, fd8dffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: 0000:01:00.1 reg 10 32bit mmio: [fd8ec000, fd8effff]
pci 0000:01:00.1: supports D1
pci 0000:01:00.1: supports D2
PCI: bridge 0000:00:02.0 io port: [8000, 8fff]
PCI: bridge 0000:00:02.0 32bit mmio: [fd800000, fd8fffff]
PCI: bridge 0000:00:02.0 64bit mmio pref: [cbf00000, dbefffff]
PCI: bridge 0000:00:04.0 io port: [9000, afff]
PCI: bridge 0000:00:04.0 32bit mmio: [fd900000, fe8fffff]
PCI: bridge 0000:00:04.0 64bit mmio pref: [dbf00000, dfefffff]
PCI: 0000:06:00.0 reg 10 64bit mmio: [fe9f0000, fe9fffff]
pci 0000:06:00.0: PME# supported from D3hot
pci 0000:06:00.0: PME# disabled
PCI: bridge 0000:00:07.0 32bit mmio: [fe900000, fe9fffff]
PCI: 0000:07:01.0 reg 10 32bit mmio: [feaff800, feafffff]
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
PCI: 0000:07:01.1 reg 10 32bit mmio: [feaff400, feaff4ff]
pci 0000:07:01.1: supports D1
pci 0000:07:01.1: supports D2
pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:01.1: PME# disabled
PCI: 0000:07:01.2 reg 10 32bit mmio: [feaff000, feaff0ff]
pci 0000:07:01.2: supports D1
pci 0000:07:01.2: supports D2
pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:01.2: PME# disabled
PCI: 0000:07:07.0 reg 10 io port: [b800, b8ff]
PCI: 0000:07:07.0 reg 14 32bit mmio: [feafec00, feafecff]
pci 0000:07:07.0: supports D1
pci 0000:07:07.0: supports D2
pci 0000:07:07.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:07.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [b000, bfff]
PCI: bridge 0000:00:14.4 32bit mmio: [fea00000, feafffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:06: ioport range 0x250-0x253 has been reserved
system 00:06: ioport range 0x256-0x25f has been reserved
system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc51 has been reserved
system 00:08: ioport range 0xc52-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd0-0xcd1 has been reserved
system 00:08: ioport range 0xcd2-0xcd3 has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x800-0x89f has been reserved
system 00:08: ioport range 0xb10-0xb1f has been reserved
system 00:08: ioport range 0x900-0x90f has been reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0xfe00-0xfefe has been reserved
system 00:08: iomem range 0xffb80000-0xffbfffff could not be reserved
system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0x8000-0x8fff
pci 0000:00:02.0: MEM window: 0xfd800000-0xfd8fffff
pci 0000:00:02.0: PREFETCH window: 0x000000cbf00000-0x000000dbefffff
pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
pci 0000:00:04.0: IO window: 0x9000-0xafff
pci 0000:00:04.0: MEM window: 0xfd900000-0xfe8fffff
pci 0000:00:04.0: PREFETCH window: 0x000000dbf00000-0x000000dfefffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
pci 0000:00:06.0: IO window: disabled
pci 0000:00:06.0: MEM window: disabled
pci 0000:00:06.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:14.4: PCI bridge, secondary bus 0000:07
pci 0000:00:14.4: IO window: 0xb000-0xbfff
pci 0000:00:14.4: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:14.4: PREFETCH window: disabled
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [8000, 8fff]
bus: 01 index 1 mmio: [fd800000, fd8fffff]
bus: 01 index 2 mmio: [cbf00000, dbefffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [9000, afff]
bus: 02 index 1 mmio: [fd900000, fe8fffff]
bus: 02 index 2 mmio: [dbf00000, dfefffff]
bus: 02 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [0, 0]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [fe900000, fe9fffff]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 mmio: [0, 0]
bus: 07 index 0 io port: [b000, bfff]
bus: 07 index 1 mmio: [fea00000, feafffff]
bus: 07 index 2 mmio: [0, 0]
bus: 07 index 3 io port: [0, ffff]
bus: 07 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 805k freed
Simple Boot Flag at 0x52 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1733
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:04.0: setting latency timer to 64
pcieport-driver 0000:00:04.0: found MSI capability
pci_express 0000:00:04.0:pcie00: allocate port service
pci_express 0000:00:04.0:pcie02: allocate port service
pci_express 0000:00:04.0:pcie03: allocate port service
pcieport-driver 0000:00:06.0: setting latency timer to 64
pcieport-driver 0000:00:06.0: found MSI capability
pci_express 0000:00:06.0:pcie00: allocate port service
pci_express 0000:00:06.0:pcie03: allocate port service
pcieport-driver 0000:00:07.0: setting latency timer to 64
pcieport-driver 0000:00:07.0: found MSI capability
pci_express 0000:00:07.0:pcie00: allocate port service
pci_express 0000:00:07.0:pcie03: allocate port service
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 288k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:00:14.1: setting latency timer to 64
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
scsi1 : ahci
scsi2 : ahci
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
ata1: softreset failed (device not ready)
ata1: failed due to HW bug, retry pmp=0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-1: new full speed USB device using ohci_hcd and address 2
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
usb 4-1: device descriptor read/64, error 2
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 10 ports detected
hub 4-0:1.0: unable to enumerate USB device on port 1
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-1: USB disconnect, address 2
ata5.00: ATAPI: Optiarc DVD RW AD-7590A, 1.62, max UDMA/33
ata5.00: configured for UDMA/33
usb 6-7: new high speed USB device using ehci_hcd and address 3
scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7590A 1.62 PQ: 0 ANSI: 5
usb 6-7: configuration #1 chosen from 1 choice
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input2
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0x60f6a offMax=0x60f6a
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
loop: module loaded
ACPI: processor limited to max C-state 1
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x12
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x13
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x14
powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x15
powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (48 C)
Linux agpgart interface v0.103
asus-laptop: Asus Laptop Support version 0.42
asus-laptop: BSTS called, 0xff7f returned
asus-laptop: T12KV model detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
ath5k_pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ath5k_pci 0000:06:00.0: setting latency timer to 64
ath5k_pci 0000:06:00.0: registered as 'phy0'
ath5k phy0: Support for RF2425 is under development.
phy0: Selected rate control algorithm 'pid'
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
acpi device:06: registered as cooling_device2
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
proc_dir_entry 'video/VGA' already registered
Pid: 1899, comm: modprobe Not tainted 2.6.27-ARCH #1
[<c01caa3f>] proc_register+0x18f/0x1c0
[<c01cac43>] proc_mkdir_mode+0x33/0x50
[<f8a7c402>] acpi_video_bus_add+0x1b8/0xb5e [video]
[<c01d2fad>] sysfs_addrm_start+0x6d/0xc0
[<c01d3d3d>] sysfs_do_create_link+0x8d/0x120
[<c0240154>] acpi_device_probe+0x3a/0x7a
[<c026c956>] driver_probe_device+0x86/0x1a0
[<c0317b14>] _spin_lock_irqsave+0x34/0x50
[<c026cae1>] __driver_attach+0x71/0x80
[<c02400bc>] acpi_device_remove+0x0/0x5e
[<c026c284>] bus_for_each_dev+0x44/0x70
[<c02400bc>] acpi_device_remove+0x0/0x5e
[<c026c7e6>] driver_attach+0x16/0x20
[<c026ca70>] __driver_attach+0x0/0x80
[<c026bc17>] bus_add_driver+0x1a7/0x220
[<c02400bc>] acpi_device_remove+0x0/0x5e
[<c026cc7c>] driver_register+0x5c/0x130
[<f8986000>] acpi_video_init+0x0/0x4d [video]
[<f8986000>] acpi_video_init+0x0/0x4d [video]
[<f898602f>] acpi_video_init+0x2f/0x4d [video]
[<c010111a>] do_one_initcall+0x2a/0x160
[<c0120b9b>] resched_task+0x1b/0x70
[<c015369b>] sys_init_module+0x8b/0x1b0
[<c0103ef3>] sysenter_do_call+0x12/0x33
=======================
acpi device:24: registered as cooling_device3
input: Video Bus as /class/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Linux video capture interface: v2.00
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:01:00.1: setting latency timer to 64
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
ACPI: Device needs an ACPI driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
uvcvideo: Found UVC 1.00 device CNF7050 (04f2:b066)
input: CNF7050 as /class/input/input9
8139cp 0000:07:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:07:07.0: Try the "8139too" driver instead.
sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:07:01.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA
ohci1394 0000:07:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ath_hal: module license 'Proprietary' taints kernel.
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4]
8139too Fast Ethernet driver 0.9.28
8139too 0000:07:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xf887ac00, 00:22:15:50:50:ea, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04711/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input10
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00015eeda0]
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 6289408k swap on /dev/sda5. Priority:-1 extents:1 across:6289408k
Clocksource tsc unstable (delta = -317832012 ns)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
hda-intel: Invalid position buffer, using LPIB read method instead.
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
usb 6-4: new high speed USB device using ehci_hcd and address 4
usb 6-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 6:0:0:0: [sdb] 985088 512-byte hardware sectors (504 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 985088 512-byte hardware sectors (504 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
usb 6-4: USB disconnect, address 4

Hi there I understand that you are having trouble with the sound button on your notebook computer. I am happy to help with this. From looking though your other posts, I see that you have been having some other general sound issues. It may be that you need to install some of the other utility software from the support page for your notebook. There are some utilitys/software that is for the configuation of some of the keyboard keys. HP Pavilion g7-1216sv Notebook PC You can look at the ones from within the Software Solutions section, one of two of those may be of use.

Problem with Video Capture, and question towards solution

Yesterday I worked on a commercial for which we captured 9 clips (roughly 10 seconds or shorter in length). The clips all had text/titles superimposed on them by an outside machine and looked good in the monitors when they were exported and captured into FCP (ie: none of the text was chopped off).
I edited the commercial and then was exporting it out, only to discover that the text on the bottom of the clips was getting chopped off.
My first question is this: is there some setting in the capture process that could have done this? something that might have gotten tweaked accidently, or corrupted in some manner? Didn't have this problem with footage captured the previous day. And since it looked good before it was put into FCP, thinking it had to be a problem with FCP.
Also, in trying to tweak the footage in FCP, I came across a 'there must be an easier way to do it' question. Is there a way to alter parameters on multiple clips (such as raising them, like I had to)? I tried selecting all and double clicking, hoping that the changes I made would affect them all, but it only affected the one I directly clicked. I'm sure there's something simple (and obvious) that I'm overlooking...
thanks!

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Stratosphere- Problem with Screen Capture and Group Text Reply

I have a problem with the side button that locks/unlocks the phone. I don't know why it happens but sometimes when I press the side button to lock the phone it takes a screen shot and send its to my Gallery under the folder ScreenCapture. I can't figure out why it does this sometimes, and when i want to actually take a screen shot I cant.
Anyone know how exactly you can take a screen shot?
Another question i have is with Group Texts. Is there a way to reply all when I receive a text that was sent to multiple people or can I only reply to the sender?
Hope someone can help thanks!

Hello kfeatherstone! I can provide you with instructions for taking a screenshot:
1. Press both the Power and Home buttons briefly.
2. You should hear a “click” sound and the screen will say “Screen captured. Saved as image file
In regards to your messaging, "reply to all" is not an available option. I hope this information helps!
ChaunceyM_VZWSupport
Follow us on twitter @VZWSupport

Problem with video capture and transmission

Hello..
I have written an application to capture video using a webcam and transmit it using RTP URL..It did work..
When the user wishes to stop capturing i would stop the processor and deallocate it.. If the user wishes to start capturing again i would just start the capturing process once again(using the same procedure i followed the first time)..
When i do this i get an exception stating:
The capture device is already in use..
Cannot create the RTP Session: Can't open local data port: 5000
(Note: I used the same port for transmission for the first time)
Is there anything that is needed to be done to release a device and port at the end of the program..
Thanks in advance!!

Thanks.. The problem was solved when i closed the processor and its data sources..
One more doubt.. Isnt it possible to transmit and receive Images through RTP..
When i try to create a Processor for and image located in my system "E:\image.jpg" i get an exception like :
Cant create Processor for "E:\image.jpg"..
Thanks for the reply!!!

Problem with document capture and UCM

Sorry, this is my first post in here and i don't know if this is the right place for that.
i'm trying to configure the commit driver in Oracle Document Capture but when i push the button i get this msg. "error creating the Capture-UCM Implementation Object"...
i don't understand why this is happening, helllppppp...
pd: Sorry 4 my english i'm from venezuela
Disculpen, es mi primera vez escribiendo en este foro y con lo grande que es no estoy seguro si pertenece a esta sección del mismo. Estoy teniendo problemas al tratar de configurar el Driver de Commit en Oracle Document Capture, al momento de pisar el boton de configurar obtengo el siguiente mensaje: "error creating the Capture-UCM Implementation Object"... si alguien sabe porque es este inconveniente cualquier ayuda me seria de mucha utilidad... Gracias de antemano

Hi,
Yeah UCM is up and running in the server,
here u have a screenshot
http://img580.imageshack.us/img580/5640/errort.jpg
i can't even configure the setting's driver, in fact this error appears trying to do it..
thanks.....
PD: here a screenshot from UCM running on server
http://img576.imageshack.us/img576/6042/ucmw.jpg
Edited by: user13071401 on 28-jun-2010 6:47

Problem recording sound during screen capture

Hi
I'm having a problem when recording screen captures in Windows XP SP3 in Boot Camp.
There is almost no sound. There is a very low sound level being picked up from the microphone.
The screen capture software I'm using is Capture Solution by SProsoft. I get the same result when using Windows Media Encoder, so I don't think it is a problem with the capturing program.
There is no problem with Windows XP making the sounds as I use it. It is just that I cannot record those sounds.
Thank you for any assistance you can give.

Hi ya I solved it..... I brought it back to the shop I got my phone in and they gave me a brand new one.
I had it for 11 months when I returned it and it was still covered by warranty hope this helps :)

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac". I really, really miss Steve Jobs!

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Image Capture and Preview have trouble finding scanner. Photoshop no problem.

Image Capture and Preview have trouble finding the scanner wirelessly unless it is on when the Mac starts up. Photoshop finds the scanner no problem. Any suggestions for Image Capture or Preview?
The scanner is Canon MP620. Mac is MBP, running 10.8.2
I have done all the uninstall, reinstall, update drivers, etc. Please don't bother suggesting that stuff.
Thanks.

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

Problem finding my sound effects and music in final cut pro X

I am having a problem finding my sound effects and music in final cut pro X. I just bought a new i
Mac, because my Mac pro died. when I was using the mac pro, I had final cut Pro X loaded, and in the Music and sound library, I had stock tracks from APM music that came with final cut. now that I have loaded final cut to my new computer, I do not see those tracks. Am I missing something?

The FCP X sound effects were an additional external download and were not kept in the FCP X application.
You probably need to re-download them.
In the FCP menu at the top left of your screen you will see the download link.

After seeing the production in London I purchased the whole sound track and it did not completely load. I've never had this problem Today I am downloading an album only to find out it's missing the voacals. Do I have to start just settling for this kinds

After seeing the production of Matilda in London I purchased the whole sound track and it did not completely load. I've never had this problem before so I just forgot about it. Today I am downloading an album only to find out it's missing the voacals. Do I have to start just settling for these kinds things. I'm feeling taken.

Hello MarkFKenny,
If you feel that there is an issue with a purchase made, you can report an issue with said purchase to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

Problems in sound capture and JMF deployment

Similar Messages

Maybe you are looking for