Problems in SXI_CACHE Refresh

Dear Experts,
I am facing Cache refresh problems in PI 7.0 :
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says " No Business System for ABC Client 100 ". where ABC=SID.
My question is : Is this issue related to BASIS Team or PI Developer Team? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_MXD
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hi Phanikumar,
This problem is related to the Basis. PI Developer is not responsible for that.
First of all make sure that you have generated the Business system Properly.
Just go to RZ70. Enter the required information and generate the Business system.and check if you can see the Technical System corresponding to Your Application system in SLD.
Just varify in SLDCHECK if you can see all the BS available in SLD.
When Applcation system try to get its own business system it uses the report which fetches the data from table "lcrt_clntcache" which get automaticay filled when you create the corresponding BS.
Just Check if you can see the entry in this table.
If not then Run the report LCR_CLEAR_CACHE which will refersh the cache and again RUN SLDCHECK now table ""lcrt_clntcache" should get filled.
if you still face the problem then you have to upgrade your Application server patch. Just Check SPS of your Application server. Just check SAP Note 1034276.
Thanks,
Sunil Singh

Similar Messages

Automatic cache refresh problem with SXI_CACHE in PI70 Sp09

Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]

Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh

Automatic cache refresh problem with SXI_CACHE

Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]

Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh

Problem in fast refreshing nested materialized views

Hi all,
While developing an ODS(Operational Data Store) system, i've created base materialized views from production database to ODS database which would use fast refresh. Now, i need to create nested Materialized views on these base MViews which contains joins and aggregations which should refresh on FAST mechanism.
But while doing so, got several problems though Nested materialized views can be built using Complete Mechanism. The reporting queries is important and we want it should not hit the production database, rather it should hit the ODS db. But we are failing to build the Nested Materialized views which works on FAST.
I tried google, oracle docs but all in vain. i tried to do a simple testing which also failed. I would be grateful if anyone can help in in this regard. I'm attaching the test case experimented,
SCOTT >CREATE MATERIALIZED VIEW LOG ON EMP
2 WITH ROWID, SEQUENCE(EMPNO, ENAME, JOB,
3 MGR, HIREDATE, SAL,
4 COMM, DEPTNO)
5 INCLUDING NEW VALUES;
Materialized view log created.
Elapsed: 00:00:00.03
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW LOG ON DEPT
2 WITH ROWID, SEQUENCE(DEPTNO, DNAME, LOC)
3 INCLUDING NEW VALUES;
Materialized view log created.
Elapsed: 00:00:00.06
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW MV_EMP
2 NOCACHE
3 ENABLE ROW MOVEMENT
4 NOLOGGING
5 NOCOMPRESS
6 PARALLEL(DEGREE DEFAULT INSTANCES DEFAULT)
7 BUILD IMMEDIATE
8 REFRESH FAST ON DEMAND
9 WITH ROWID
10 ENABLE QUERY REWRITE
11 AS
12 SELECT * FROM EMP;
Materialized view created.
Elapsed: 00:00:00.21
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW MV_DEPT
2 NOCACHE
3 ENABLE ROW MOVEMENT
4 NOLOGGING
5 NOCOMPRESS
6 PARALLEL(DEGREE DEFAULT INSTANCES DEFAULT)
7 BUILD IMMEDIATE
8 REFRESH FAST ON DEMAND
9 WITH ROWID
10 ENABLE QUERY REWRITE
11 AS
12 SELECT * FROM DEPT;
Materialized view created.
Elapsed: 00:00:00.14
SCOTT >CREATE MATERIALIZED VIEW LOG ON MV_EMP
2 WITH ROWID, SEQUENCE(EMPNO, ENAME, JOB,
3 MGR, HIREDATE, SAL,
4 COMM, DEPTNO)
5 INCLUDING NEW VALUES;
Materialized view log created.
Elapsed: 00:00:00.04
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW LOG ON MV_DEPT
2 WITH ROWID, SEQUENCE(DEPTNO, DNAME, LOC)
3 INCLUDING NEW VALUES;
Materialized view log created.
Elapsed: 00:00:00.03
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW MV_EMP_DEPT
2 NOCACHE
3 ENABLE ROW MOVEMENT
4 NOLOGGING
5 NOCOMPRESS
6 PARALLEL(DEGREE DEFAULT INSTANCES DEFAULT)
7 BUILD IMMEDIATE
8 REFRESH FAST ON DEMAND
9 WITH ROWID
10 ENABLE QUERY REWRITE
11 AS
12 SELECT D.ROWID DEPT_ROWID, E.ROWID EMP_ROWID, E.ENAME, D.DNAME, D.LOC, E.JOB, E.SAL
13 FROM MV_EMP E,
14 MV_DEPT D
15 WHERE E.DEPTNO=D.DEPTNO;
FROM MV_EMP E,
ERROR at line 13:
ORA-12053: this is not a valid nested materialized view
Elapsed: 00:00:00.17
SCOTT >
SCOTT >CREATE MATERIALIZED VIEW MV_EMP_DEPT
2 NOCACHE
3 ENABLE ROW MOVEMENT
4 NOLOGGING
5 NOCOMPRESS
6 PARALLEL(DEGREE DEFAULT INSTANCES DEFAULT)
7 BUILD IMMEDIATE
8 REFRESH FORCE ON DEMAND
9 WITH ROWID
10 ENABLE QUERY REWRITE
11 AS
12 SELECT D.ROWID DEPT_ROWID, E.ROWID EMP_ROWID, E.ENAME, D.DNAME, D.LOC, E.JOB, E.SAL
13 FROM MV_EMP E,
14 MV_DEPT D
15 WHERE E.DEPTNO=D.DEPTNO;
Materialized view created.
Elapsed: 00:00:00.25
SCOTT >
SCOTT >EXECUTE DBMS_MVIEW.REFRESH('MV_EMP','F');
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.04
SCOTT >EXECUTE DBMS_MVIEW.REFRESH('MV_DEPT','F');
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.04
SCOTT >EXECUTE DBMS_MVIEW.REFRESH('MV_EMP_DEPT','F');
BEGIN DBMS_MVIEW.REFRESH('MV_EMP_DEPT','F'); END;
ERROR at line 1:
ORA-12004: REFRESH FAST cannot be used for materialized view "SCOTT"."MV_EMP_DEPT"
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
ORA-06512: at line 1
Elapsed: 00:00:00.11
SCOTT >EXECUTE DBMS_MVIEW.REFRESH('MV_EMP_DEPT','C');
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.35
SCOTT >

Sorry,
By mistake this got posted in the CERTIFICATION forum,
you can view the same question in the following link:
Problem in fast refreshing nested materialized views

NMac Pro 6core D500 problems with screen refresh: 10.9.3 warning!

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Avoid 10.9.3 on the Mac Pro 6 core, D500.
Problem with screen refresh using Motion soon after updating OSX from Mac Pro late 2013 version of 10.9.2.
I tried my Asus HDMI at all resolutions but to no avial. The screen juddered like it was Windows 95 without any GPU drivers.
Apple's Tech Support had me use many key commands and finally we found out there was no issue with my hardware. Apple suggested a clean install before sending it back for repair. I was fortunate to have had made a backup in the Time Machine of my computer soon after installing all my apps. After restoring my computer is running 10.9.2 version made for the Mac Pros Late 2013. There are no more problems with screen redraw after using Motion.
So, it is clear I cannot upgrade my Mac Pro to 10.9.3 while the issue with Motion's render engine messing with my screen refresh continues. Returning to 10.9.2 has made me realize 10.9.3 is slower and not as stable.
I would suggest not upgrading unless you have a 4k monitor.

Cache Refresh Problem in SXI_CACHE Transaction in new client 700

Hi Experts,
    We have installed and configured the new PI7.1 server and were checking its readiness by going through the Readiness Check Document. At one stage while we run the transaction SXI_CACHE in client 700 we are not getting the option of " Start Complete Cache Refresh" in highlighted mode. Thus we are not able to refresh the cache in client 700. But if I login in Client 001 and login using SAP* and run the SXI_CACHE I am able to see all the pipeline steps as well the option for complete Cache refresh and Adapter cache referesh is in Highlighted mode. The status is also green. Can somebody us in knowing where should we look into to solve this problem so that these option are available in the new client for refershing the CACHE.
Thanks
Regards
suk4023

Hi Soujanya,
    Yes we tried with the link given by you . we got the folowing error
403   Forbidden
SAP NetWeaver Application Server 7.11 / AS Java 7.11
Error: You are not authorized to view the requested resource.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: No details available
Yes we tried by restaring the system too, but the status is same.
Any more inputs will be appreciated............
Thanks
Regards
Suk4023

Problem with SXI_CACHE

Hi All,
I'm unable to do a cache refresh from trax SXI_CACHE. The two options 'Start Complte Cache Refresh' and 'Start Delta Cache Refresh' are disabled in SXI_CACHE. Also couldn't to the cache from Integration Directory.
Any inputs are greatly appreciated.
Regards,
Nazim

Hi Nazim,
This might help you
Call transaction SM58 to check the status of the refresh process.
If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
To start a new test run, choose Start Test.
The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
To Update the displayed results, choose Refresh Display.
The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
Thanks & Regards,
Agasthuri Doss

Error during sxi_cache refresh after upgrade 3.0 to PI 7.11

During sxi_cache we are getting the error
com.sap.aii.utilxi.misc.api.InternalErrorException: Internal error: Link from Communication Component | IP_NSP1007_001_PS020_BeoordelingOudeManager to object type "MAPPING" with role "IFOUT" is not permitted
where IP_NSP1007.. is an Integration Process.
we also getting the error when displaying a configuration object :
Original language Dutch for current object collides with permitted display or editing languages EN; contact your system administrator
regards meinhart Lingbeek.

Hi,
The problem is with the patch level after upgrading to PI 7.11. AS suggested by Hareen..Apply the latest patch (note:1344144). The problem will be resolved.
Cheers!!!
Naveen.

Problem with cache refresh entity bean / server node

Hello,
ive got a big problem and not found answer in sdn until now.
Ive got a job that gets data from maxdb by sapjob - jco - session bean - entity bean - database.
this job works daily. the data to work with is written directly to database from external.
on first execute it works, but second etc not. i search for answer and i guess something:
entity bean is cached (increase percormance?) with results of the select and do not know about new database entries when they are written directly to database. so second select says: there is no new data (but they are there).
i only get this new data when i restart netweaver server node, then it works, but only for one time. then result is in cache and then i have to do same procedure before it goes (restart server).
how can i get this data? is there any setting for force node to refresh cache? or any other settings to affect something like this?
we have to go live with this in august.
thx for help.
Version: NW04, SP21

thanks at first.
OSS was the next step i consider, enforcedly.
I hoped that there was a kind of timeout in visual admin or somewhere else where (for example) i can set a special time (seconds?) for refreshig the cache. Or i can set a flag for "do not cache entity beans".
Someone else any idea?
Nowadays on test system whe have made a task that starts windows every night so that netweaver also is "fresh". a kind of resolution but not the best and no resolution for the productiv system. or whe have to write a kind of batch job that only restarts server node once a day.
New Info:
I think cache was filled directly after restart.
when we restart, then data are written, and then our application wanted to read them, they are also not seen.
The data are only seen by bean when the restart takes place AFTER the data are written into db.
So we change restart time to point after data are written. so we will test if this works, on monday we will see.
Edited by: Torsten on Jul 11, 2008 11:27 AM

Problem with Reset/Refresh after Windows 8.1 upgrade

When I try to do a Refresh or Reset on my Helix after it has been upgraded to 8.1, I receive a message to "Insert Media. Some of the files are missing." Does anyone know how to fix this?

I have same problem, there are some solutions on my thread you can check them out if you like.
http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Unable-to-Reset-Refresh/td-p/1533410

Field mapping problem using EntityManager.refresh(...) and @SecondaryTable

I am experiencing an exception indicating a missing mapping for a field. My problem is that I have a mapping! I suspect the problem has something to do with the fact the field in question is also the @PrimaryKeyJoinColumn. Am I doing something wrong or is this a bug in the refresh() method code since the find() method works with no problem? Thanks in advance.
Code and log excerpts follow:
Calling Code...
TaxableDescription description = em.find( TaxableDescription.class, cusip );
if (refreshEntity) {
{color:#ff0000}em.refresh( description );{color}
Entity Code..
@Entity
{color:#ff0000}@Table( name="f_ISSUE" )
@SecondaryTable(
name="f_COUPON_INFO",
pkJoinColumns=@PrimaryKeyJoinColumn(
referencedColumnName="issue_id", name="issue_id"
){color}
@NamedQueries({
@NamedQuery(
name="TaxableDescription.findByCusip",
query="SELECT d FROM TaxableDescription d WHERE d.cusip = :cusip"
public class TaxableDescription
extends Description implements Serializable
private long issueID;
private long fkIssueID;
private String interestFrequencyCode;
private Date nextCallDate;
private double nextCallPrice;
private Date parCallDate;
private double parCallPrice;
private boolean defaulted;
private String variableCouponType;
//@Id
@Column( name="issue_id", table="f_ISSUE" )
public long getIssueID() {
return issueID;
public void setIssueID( long issueID ) {
this.issueID = issueID;
@Override
@Id
@Column( name="CUSIP_nbr" )
public String getCusip() {
return super.getCusip();
@Override
public void setCusip(String cusip) {
super.setCusip(cusip);
@Override
@Column( name="maturity", updatable=false, insertable=false )
@Temporal(TemporalType.DATE)
public Date getMaturity() {
return super.getMaturity();
@Override
public void setMaturity(Date maturity) {
super.setMaturity(maturity);
{color:#ff0000} @Column( table="f_COUPON_INFO", name="issue_id", insertable=false, updatable=false )
{color} public long getFkIssueID() {
return fkIssueID;
public void setFkIssueID( long fkIssueID ) {
this.fkIssueID = fkIssueID;
@Override
@Column( table="f_COUPON_INFO", name="coupon", updatable=false, insertable=false )
public double getCoupon() {
return super.getCoupon();
@Override
public void setCoupon(double coupon) {
super.setCoupon( coupon );
@Column( table="f_COUPON_INFO", name="interest_frequency", updatable=false, insertable=false )
public String getInterestFrequencyCode() {
return interestFrequencyCode;
public void setInterestFrequencyCode( String interestFrequencyCode ) {
this.interestFrequencyCode = interestFrequencyCode;
@Override
@Column( table="f_COUPON_INFO", name="dated_date", updatable=false, insertable=false )
@Temporal( TemporalType.DATE )
public Date getDatedDate() {
return super.getDatedDate();
@Override
public void setDatedDate(Date datedDate) {
super.setDatedDate(datedDate);
@Override
@Column( table="f_COUPON_INFO", name="first_interest_date", updatable=false, insertable=false )
@Temporal( TemporalType.DATE )
public Date getFirstInterestDate() {
return super.getFirstInterestDate();
@Override
public void setFirstInterestDate(Date firstInterestDate) {
super.setFirstInterestDate(firstInterestDate);
@Column( name="next_call_date", updatable=false, insertable=false )
@Temporal( TemporalType.DATE )
protected Date getNextCallDate() {
return nextCallDate;
protected void setNextCallDate( Date date ) {
this.nextCallDate = date;
@Column( name="next_call_rate", updatable=false, insertable=false )
protected double getNextCallPrice() {
return nextCallPrice;
protected void setNextCallPrice( double value ) {
this.nextCallPrice = value;
@Column( name="par_call_date", updatable=false, insertable=false )
@Temporal( TemporalType.DATE )
protected Date getParCallDate() {
return parCallDate;
protected void setParCallDate( Date date ) {
this.parCallDate = date;
@Column( name="par_call_rate", updatable=false, insertable=false )
protected double getParCallPrice() {
return parCallPrice;
protected void setParCallPrice( double value ) {
this.parCallPrice = value;
@Column( name="moodys_code", updatable=false, insertable=false )
public Integer getIntegerMoodysCode() {
return super.getMoodysCode();
public void setIntegerMoodysCode(Integer moodysCode) {
super.setMoodysCode( moodysCode != null ? moodysCode : 99 );
@Column( name="s_p_code", updatable=false, insertable=false )
public Integer getIntegerSpCode() {
return super.getSpCode();
public void setIntegerSpCode(Integer spCode) {
super.setSpCode( spCode != null ? spCode : 99 );
@Column( name="fitch_code", updatable=false, insertable=false )
public Integer getIntegerFitchCode() {
return super.getFitchCode();
public void setIntegerFitchCode(Integer fitchCode) {
super.setFitchCode( fitchCode != null ? fitchCode : 99 );
@Override
@Column( name="principal_amt", updatable=false, insertable=false )
public double getPrincipalAmount() {
return super.getPrincipalAmount();
@Override
public void setPrincipalAmount(double principalAmount) {
super.setPrincipalAmount(principalAmount);
@Transient
public boolean getDefaulted() {
return defaulted;
@Transient
public boolean isDefaulted() {
return defaulted;
public void setDefaulted( boolean defaulted ) {
this.defaulted = defaulted;
@Column( name="defaulted", updatable=false, insertable=false )
public String getDefaultedFlag() {
return defaulted ? "Y" : "N";
public void setDefaultedFlag( String defaultedFlag ) {
this.defaulted = "Y".equalsIgnoreCase( defaultedFlag );
@Column( table="f_COUPON_INFO", name="coupon_change_indicator", updatable=false, insertable=false )
public String getVariableCouponType() {
return variableCouponType;
public void setVariableCouponType( String variableCouponType ) {
this.variableCouponType = variableCouponType;
@OneToMany( targetEntity=com.bondtrac.entities.TaxableCouponStepEntity.class )
@JoinTable(
name="f_CHANGE_SCHEDULE",
joinColumns=@JoinColumn( name="issue_id", referencedColumnName="issue_id" )
public List getCouponSteps() {
return super.getCouponStepSchedule();
public void setCouponSteps( List couponSteps ) {
super.setCouponStepSchedule( couponSteps );
@PostLoad
private void postLoad() {
if ( interestFrequencyCode != null &&
interestFrequencyCode.length() > 0 )
int intFreq = 2;
try {
intFreq = Integer.parseInt( interestFrequencyCode );
catch ( Exception e ) {}
if ( intFreq <= 0 ) intFreq = 2;
super.setInterestFrequency( intFreq );
else {
super.setInterestFrequency( 2 );
if ( nextCallDate != null || parCallDate != null ) {
CallSchedule _callSchedule = super.getCallSchedule();
if ( _callSchedule == null ) {
_callSchedule = new CallSchedule();
super.setCallSchedule( _callSchedule );
if ( nextCallDate != null ) {
_callSchedule.addCall( nextCallDate, nextCallPrice );
if ( parCallDate != null ) {
_callSchedule.addCall( parCallDate, parCallPrice );
@PrePersist
@PreUpdate
private void preUpdate() {
switch ( super.getInterestFrequency() ) {
case 2 : interestFrequencyCode = "2"; break;
case 1 : interestFrequencyCode = "1"; break;
case 4 : interestFrequencyCode = "4"; break;
case 12 : interestFrequencyCode = "12"; break;
case 99 : interestFrequencyCode = "99"; break;
default : interestFrequencyCode = "2"; break;
nextCallDate = null;
nextCallPrice = 0.0;
parCallDate = null;
parCallPrice = 0.0;
CallSchedule _callSchedule = super.getCallSchedule();
if ( _callSchedule != null ) {
Call call = _callSchedule.getNextCall();
if ( call != null ) {
nextCallDate = call.getDate();
nextCallPrice = call.getAmount();
call = _callSchedule.getNextParCall();
if ( call != null ) {
parCallDate = call.getDate();
parCallPrice = call.getAmount();
@Override
public int hashCode() {
return cusip != null ? cusip.hashCode() : 0;
@Override
public boolean equals( Object o ) {
if ( !( o instanceof TaxableDescription ) ) return false;
TaxableDescription otherDescription = (TaxableDescription)o;
if ( cusip == otherDescription.cusip ) return true;
if ( cusip != null ) return cusip.equals( otherDescription.cusip );
return false;
Server log entry...
[#|2008-11-20T17:41:42.389-0600|WARNING|sun-appserver9.1|oracle.toplink.essentials.session.file:/opt/SUNWappserver/domains/domain1/applications/j2ee-apps/Bondtrac-EE/Bondtrac-EE-pu.jar-BondtracPU|_ThreadID=36;_ThreadName=p: thread-pool-1; w: 44;_RequestID=5b92f658-e52c-4b83-aafc-454a052fc30b;|
Local Exception Stack:
Exception [TOPLINK-45] (Oracle TopLink Essentials - 2.0.1 (Build b04-fcs (04/11/2008))): oracle.toplink.essentials.exceptions.DescriptorException
{color:#ff0000}Exception Description: Missing mapping for field [f_COUPON_INFO.issue_id].{color}
Descriptor: RelationalDescriptor(com.bondtrac.entities.TaxableDescription --> [DatabaseTable(f_ISSUE), DatabaseTable(f_COUPON_INFO)])
at oracle.toplink.essentials.exceptions.DescriptorException.missingMappingForField(DescriptorException.java:901)
at oracle.toplink.essentials.internal.descriptors.ObjectBuilder.addPrimaryKeyForNonDefaultTable(ObjectBuilder.java:154)
at oracle.toplink.essentials.internal.descriptors.ObjectBuilder.buildRowForTranslation(ObjectBuilder.java:899)
at oracle.toplink.essentials.queryframework.ReadObjectQuery.prepareForExecution(ReadObjectQuery.java:502)
at oracle.toplink.essentials.queryframework.DatabaseQuery.execute(DatabaseQuery.java:622)
at oracle.toplink.essentials.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:692)
at oracle.toplink.essentials.queryframework.ObjectLevelReadQuery.executeInUnitOfWork(ObjectLevelReadQuery.java:746)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2233)
at oracle.toplink.essentials.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:952)
at oracle.toplink.essentials.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:909)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerImpl.refresh(EntityManagerImpl.java:389)
at com.sun.enterprise.util.EntityManagerWrapper.refresh(EntityManagerWrapper.java:511)
at com.bondtrac.ejb.DescriptionDAOBean.getDescription(DescriptionDAOBean.java:76)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandlerDelegate.invoke(EJBLocalObjectInvocationHandlerDelegate.java:83)
at $Proxy197.getDescription(Unknown Source)
at com.bondtrac.offeringprocessor.OfferingProcessorBean.process(OfferingProcessorBean.java:1373)
at com.bondtrac.offeringprocessor.OfferingProcessorBean.processOfferingEntity(OfferingProcessorBean.java:642)
at com.bondtrac.offeringprocessor.OfferingProcessorBean.calculateOfferings(OfferingProcessorBean.java:926)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:203)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:77)
at $Proxy198.calculateOfferings(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:154)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:687)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:227)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
|#]

What database are you using? My guess is that the database you are using returns field names in Uppercase. While the database may not be case sensitive, most databases will convert the field names to either all upper or lower case when returning the metadata - which associates the fields to the values. In this case, it is looking for a value for "issue_id" in the returned results, when I suspect that the database returned a value for "ISSUE_ID". Try having your column names match what the database will return and see if you still get problems.
The other part to this problem is that it does not appear mapped correctly. The primarykeyJoincolumn isn't using primary key fields (CUSIP_nbr is specified as the id), and you have a join table also using the "issue_id" field, so it really should be the id. Either way, the Secondary table is specifying f_ISSUE.issue_id to be a foreign key to f_COUPON_INFO.issue_id, and so the getFkIssueID annotation should be marked insertable=true, updateable =true and the annotation on getIssueID marked insertable=false, updatable=false,since it is set through the f_COUPON_INFO.issue_id field. Fixing this will also likely resolve the issue - the error says it can't find a mapping for the f_COUPON_INFO.issue_id but from looking at the code, what I believe it means is that it can't find a writable mapping. Reading this over again, it looks very confusing but I dont know if I can explain it much better. The field f_COUPON_INFO needs to be writeable and set by the application because you have marked it as controlling the field in f_ISSUE. The field in f_ISSUE needs to be read only, because the value is set/controlled by the value in f_COUPON_INFO.
Best Regards,
Chris

Problem in SXI_CACHE ReturnCode 99

Hi Everyone,
We're encountering a problem in our Test box. The return code for one of our integration processes is still 99 even after activating it in SXI_CACHE. In our acceptance box and Dev box, the return code is 0. Everything is working fine for both the systems. The error is in the test box only (dev -> test -> acceptance). We have tried reactivating the whole SCV and transporting but it did not work. We have also tried reactivating the Integration process in ID, and transporting it but still no luck. We have also tried the various suggestions in the forum but we're still having an error.
The error message in SXI_CACHE is :
E    For http://xxx yyy there is already definition ZXI_PROXY_xxx
E    For http://xxx yyy there is already definition ZXI_PROXY_yyy
S    --- Translating step type 'RECEIVE' with ID '3' ---
E    No container definition available
S    --- Translating step type 'SEND' with ID '9' ---
S    --- Translating step type 'SEND' with ID '18' ---
Any suggestion is welcome.
Thanks.

1. make some dummy change to the IP in IB
2. if not works then re-import the IP in IB (delete and re-import)

Problem with ATV refresh rates and frame rates

I live in Australia and as such I am subject to PAL, so when I set my ATV up I set it to 720P 50Hz, when I purchased a TV season the episodes were running at 25fps and played back flawlessly with no dropped or added frames. My problem occurs when I download movies, all the movies I have bought are running at 24fps and suffer from quite noticeable jitter, almost like the 24th frame is duplicated and added as the 25th frame, I assume it is something like this as the pause happens every second.
So has anyone had a problem similar to this and if so what do you do about it?
Does the ATV playback all sources (24/25) smoothly even if it has to convert?
Could it be caused by my TV?
Any help to any of these questions would be great.
Thanks.
Tim.

With my particular Apple TV setup and TV combination, I find that setting to 1080p (60hZ) gives my the best all-round round results.
This does result in -slightly- jerky motion with 25fps material (especially old British TV shows), but it's bearable. It's particularly noticeable with sideways scrolling text and credits.
The one thing that is peculiar on my setup is if I use 720p (either @60hz or 50hz) and watch an iTunes-purchased HD episode that is encoded at 24fps I get very odd motion effects indeed. Every few seconds the video appears to speed up almost like it is 'catching up' with lost frames - very hard to explain exactly how it looks. Anyway I set to 1080p and this effect is gone completely. It also goes away if I set to 1080i. I think something queer is going on with 720p on the Apple TV (at least with my TV there is). This happens with both HDMI and component outputs.
It may be worth trying 1080i at either 50 or 60Hz if your set can't do 1080p.
I would also suggest that 60hz in theory should give a smoother motion for 24fps playback than 50Hz.
My basic problem with all this is that on even a cheap DVD player if a disk is 50Hz, the player switches to 50Hz output and if it is 60Hz, it will change to 60Hz. The Apple TV stays fixed. It's a shame it can't autoswitch refresh rates.

Newbie problem - how to refresh frames when selected by a link

A few weeks ago I was handed an antiquated frame-based site to update which has given me more than a few headaches. I’ve managed to acquire a copy of Dreamweaver CS 3 from the power that be, and have been trying to find a solution to the following problem:
I am attempting to tie in a .pdf document into a simple frame template, with a static left-hand frame allowing the user to select and display the anchored point on a .pdf document on the right. This I’ve done with few peoblems, however when the user tries to click another link the dispayed .pdf doc after an initial selection the right-hand frame doesn’t move position to the newly selected anchor point.
This I think is due to the fact that the link refers to the same document, despite the fact that it’s to a different location on the doc. I have been trying to find a way to ‘refresh’ the page when a link is selected so that the right-hand side diplay moves to the correct anchor point, but I’d had little luck.
My question to you all is as follows: is there I can tell CS3 to refresh the right-hand side frame every time a link is clicked? Any help would be appreciated!
Yours, a very naiive newbie Dreamweaver user

The website I'm currently working on is an internal network, so unfortunately it's unavailable for general view. The layout sticks pretty close to the normal two frame dreamweaver template, with a series of created links on the left frame opening an adobe document in the right frame. Very basic but that's largely the intention.
The reason why I am linking to a .pdf document is simply because my work task demands I keep it in use, however since this means future revisions should be fairly easy (working off the same anchor/destination points in the .pdf document text this isnt a huge issue).
Not entirely ideal I know but at least it creates an interesting problem!
If anyone has a easy to create, newbie-friendly alternative to frames whereby I could create a site which links directly to specific areas in a .pdf document on demand I would be a very happy man! Willing to potentially offer beer/first-born as payment.

Problem with MVIEW Refresh

Hi all,
I am facing the following problem while refreshing MVIEWS.
ORA-12008: error in materialized view refresh path
ORA-03113: end-of-file on communication channel.
I am using the following method to refresh.
dbms_mview.REFRESH ('Mview_Name',
'C',
TRUE,
FALSE,
0,
0,
0,
TRUE
The script for creating MVIEW is as follows:-
CREATE MATERIALIZED VIEW gb_ghx_orgs_a
PCTFREE 5 PCTUSED 60
TABLESPACE TableSpace_Name
STORAGE (INITIAL 250k NEXT 250k)
REFRESH COMPLETE WITH ROWID
START WITH SYSDATE
AS
SELECT Statement;
can any body help.
Thanks

What version of database do you have? what client version are you connecting from?
ORA-03113 may required you to contact Oracle Support.
SQL> CREATE MATERIALIZED VIEW gb_ghx_orgs_a
2 PCTFREE 5 PCTUSED 60
3 TABLESPACE KKISHORE
4 STORAGE (INITIAL 250k NEXT 250k)
5 REFRESH COMPLETE WITH ROWID
6 START WITH SYSDATE
7 AS
8 select * from scott.emp
9 /
Materialized view created.
SQL> begin
2      dbms_mview.REFRESH ('gb_ghx_orgs_a',
3      'C',
4      '',
5      TRUE,
6      FALSE,
7      0,
8      0,
9      0,
10      TRUE
11      );
12 end ;
13 /
PL/SQL procedure successfully completed.
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
SQL>

Problems in SXI_CACHE Refresh

Similar Messages

Maybe you are looking for