Problems posting

Hi fellows, i'm a beginner in SAP-FI and am having problems posting documents.
The error says:
<b>System error in routine FI_TAX_CHK_PRICING_DATA error code 13 function builder TAX2</b>
any suggestions??

Hi,
can you explain a little bit clear....what kind og postings are you handling and where are you getting problem ...
regards,
vinay

Similar Messages

  • I am a graduate student and have problems posting to my schools discussion board "blackboard". Any suggestions?

    I am a graduate student and have problems posting to my schools discussion board "blackboard". Any suggestions?

    Download the Blackboard for mobile app for the iPad.
    -> http://itunes.apple.com/us/app/blackboard-mobile-learn/id364252826?mt=8

  • Hey Verizon / HTC / Google  Please fix the caller ID problem, post 2.2 Froyo UPDATE.

    Hey Verizon / HTC / Google  Please fix the caller ID problem, post 2.2 Froyo UPDATE.  This is a major Problem. 

    I have provided some steps below that may help with the Caller Id issue you are experiencing.
    Try completing a soft reset on the device. A soft reset would be powering the device off and pulling out the battery. Once the battery is removed, place it back in and power the device back on.
    Dial *228 and send. Once dialed, listen for the recording to prompt you for option 1 and select option 1. The phone should complete its programming within a minute.
    Ensure you are using the area-code and 7 digit number format (ex. 9999951212)
    Try removing the contact and re-adding it.

  • Problem posting data with HttpsConnection

    Hi,
    I am currently having problems posting data using a HttpsConnection.
    I am setting the setRequestMethod to HttpConnection.POST and then using the openDataOutputStream method.
    I will post my code when I get home for reference.
    Background to my problem - I am trying to use the declarative security features of J2EE to authenticate a mobile user.
    I am firstly firing a HttpsConnection from the mobile device to a protected resource on the app server. I grab the JSessionId from the Set-Cookie http header of the response and post a second request to the j_security_check and provide the refer http header to the protected resource - this simulates exactly what happens on a browser (I used a Http monitor tool to confirm this). However, I need to pass the j_username and j_password as body of the https request. This doesn't seem to work because the server displays my access denied at this point - as if it hadn't received the crednetials
    However, just to confirm my technique works I subsituted the post request for a get request to j_security_check and passed the j_username and j_password as request params in the URL. This worked fine and I got a 302 response 'temporily moved' which I then handle by simply making a further request for the original resource - this time it serves back the resource because I am authenticated.
    Anyway that sets the scene - so the problem definitely appears to be posting data using an HttpsConnection.
    Any help would be greatly appreciated
    Rgds,
    David

    Hi,
    Here is my code relating to the above problem:
    httpsConn = (HttpsConnection)Connector.open("https://127.0.0.1:8443/ebank/j_security_check");
                httpsConn.setRequestMethod(HttpConnection.POST);
                httpsConn.setRequestProperty("referer", "https://127.0.0.1:8443/ebank/main/mainMenu.xml");
                httpsConn.setRequestProperty("cookie", cookieValue);
                httpsConn.setRequestProperty("location", url);
                httpsConn.setRequestProperty("User-Agent",
                    "Profile/MIDP-1.0, Configuration/CLDC-1.0");
                httpsConn.setRequestProperty("Content-Language",
                    "en-gb");
    String credentials = "j_username=EB0001&j_password=240589";
                httpsConn.setRequestProperty("Content-Length",""+credentials.length());
                DataOutputStream os = httpsConn.openDataOutputStream();
                os.writeUTF(credentials);
    ....Thanks,
    David

  • Problem Posting an Event to the EventQueue

    Hi all,
    while i develop a java application i get problem posting ana event to the EventQueue using postEvent method.Here is the problem.i have a menu which have 3 menu items (Load, store, hide).i want when the user click "hide" the code in "store" option excuted plus extra code in option "hide".i tried to implement this using the postEvent of EventQueue. i simlate this by tring to post ActionEvent to simulate user cliks option "store" but this didn't work. can anyone tell me what's the problem.thanks

    try JMenuItem's doClick(). that simulates the user clicking on your menu item.
    thomas

  • Problem posting photos to Facebook Pages.  Help!

    Is anyone else having a problem posting photos to Facebook Pages?  I have been doing so on a daily basis for a few years now.  Yesterday, I was unable to post to a Facebook Page (not personal accounts). 
    Now, when I attempt to create a Published Collection for Facebook, I no longer have the option to select an existing Facebook Page Album.
    Has something changed?  Many thanks in advance for your feedback!
    Paul,
    Midlothian,VA

    hi again.. in January it was a facebook problem.. there were no lightroom updates.. same now.. so you can go to facebook and fill in that form That Paul Diming talks about in a previous post
    I have reported this problem to Facebook using their own problem reporting mechanism.
    It would help if everyone who is having this issue should do the same.  Here is the process:
    1. Click on the pull down on the far upper right of the screen.
    2. Click "Report a Problem"
    3. Click "Something Isn't Working"
    4. Select Pages on the pull down.
    5. Explain the problem.
    6. Upload a screen image. I captured an image of trying to create a new published collection with the pull down showing no Page Albums listed.
    It might help for Facebook to know that it isn't just me having the problem.

  • Problem posting to group wiki/blog using podcast capture

    I am having a problem posting to 2 wiki blogs using podcast capture and montage workflow. A similar montage workflow works great on another group wiki blog. I am getting this log error:
    *Xgrid Job: 72 is Running*
    *Wed Jan 06 08:16:37 -0600 2010 -- Unknown agent: 7A49DCBE-B57B-4ED8-A250-9CA538A06856*
    *Wed Jan 06 08:16:37 -0600 2010 -- Unknown agent: 8251443A-5F69-40A0-8172-12DA139F8DAC*
    *Wed Jan 06 08:16:38 -0600 2010 -- Unknown agent: 24690148-E8E5-40B3-A46F-6C3C652B04CF*
    *Wed Jan 06 08:17:39 -0600 2010 -- Unknown agent: 7A49DCBE-B57B-4ED8-A250-9CA538A06856*
    *Wed Jan 06 08:17:39 -0600 2010 -- Unknown agent: 8251443A-5F69-40A0-8172-12DA139F8DAC*
    *Wed Jan 06 08:17:41 -0600 2010 -- Unknown agent: 24690148-E8E5-40B3-A46F-6C3C652B04CF*
    *Wed Jan 06 08:18:33 -0600 2010 -- Xgrid Job: 72 is Failed*
    Has someone seen this problem using Mac OS X Server 10.6.2, Podcast Producer server.

    Yes, the related log:
    Processing paginated document as landscape...
    Processing Page... (1 / 8)
    Processing Page... (2 / 8)
    Processing Page... (3 / 8)
    Processing Page... (4 / 8)
    Processing Page... (5 / 8)
    Processing Page... (6 / 8)
    Processing Page... (7 / 8)
    Processing Page... (8 / 8)
    Running /Network/Servers/tmstec.mtsu.edu/Volumes/datastore/PodcastProducer/Shared/Caches/Resources/Tools/preflightscript
    ########### STDERR ###########
    Wed Jan 6 08:18:09 tmstec.mtsu.edu pcastaction[7454] <Notice>: PodcastProducer::Actions::Annotate: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=edit-core-master.mov --no_fail} v.2
    DEPRECATED: This command has been deprecated please use /usr/bin/pcastaction
    Wed Jan 6 08:18:09 tmstec.mtsu.edu pcastaction[7454] <Notice>: PodcastProducer::Actions::Annotate: 'edit-core-master.mov' was successfully annotated with {:software=>"Podcast Producer", :title=>"Copyright Law", :copyright=>""}
    Wed Jan 6 08:18:09 tmstec.mtsu.edu pcastaction[7454] <Notice>: PodcastProducer::Actions::Annotate: FINISH
    Wed Jan 6 08:16:39 tmstec.mtsu.edu pcastaction[7239] <Notice>: PodcastProducer::Actions::Watermark: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --watermark=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer /Shared/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Workin g/0009CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Images/8ea6d.png --input=import-plugin-document-generated.mov --size=10 --opacity=70 --position=Top Right --output=edit-core-intermediate-1.mov --editinfofile=edit-info.yaml} v.2
    Wed Jan 6 08:16:40 tmstec.mtsu.edu qc2movie[7247] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:16:42.282 qc2movie[7247:903] * Failed updating composition repository cache
    Wed Jan 6 08:16:42 tmstec.mtsu.edu pcastaction[7239] <Notice>: PodcastProducer::Actions::Watermark: FINISH
    Wed Jan 6 08:17:02 tmstec.mtsu.edu pcastaction[7343] <Notice>: PodcastProducer::Actions::Merge: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input1=edit-core-intermediate-4.mov --input2=/Network/Servers/tmstec.mtsu.edu/Volumes/datastore/PodcastProducer/Shared/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Cont ents/Resources/Working/0009CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resourc es/Movies/tmsteclogo.mov --duration=1 --pqz=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/0009 CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Compositions/DissolveTra nsition.pqz --firstinput_is_maincontent --output=edit-core-intermediate-5.mov --editinfofile=edit-info.yaml} v.2
    Wed Jan 6 08:17:03 tmstec.mtsu.edu qc2movie[7355] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:17:05.711 qc2movie[7355:903] * Failed updating composition repository cache
    2010-01-06 08:17:08.623 qttrackadd[7359:903] * Failed updating composition repository cache
    Wed Jan 6 08:17:09 tmstec.mtsu.edu pcastaction[7343] <Notice>: PodcastProducer::Actions::Merge: FINISH
    Wed Jan 6 08:16:55 tmstec.mtsu.edu pcastaction[7275] <Notice>: PodcastProducer::Actions::Merge: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input1=/Network/Servers/tmstec.mtsu.edu/Volumes/datastore/PodcastProducer/Shared/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Cont ents/Resources/Working/0009CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resourc es/Movies/tmsteclogo.mov --input2=edit-core-intermediate-3.mov --duration=2 --pqz=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/0009 CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Compositions/ScaleTransi tion.pqz --secondinput_is_maincontent --output=edit-core-intermediate-4.mov --editinfofile=edit-info.yaml --direction=0} v.2
    Wed Jan 6 08:16:56 tmstec.mtsu.edu qc2movie[7289] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:16:58.302 qc2movie[7289:903] * Failed updating composition repository cache
    2010-01-06 08:17:01.246 qttrackadd[7337:903] * Failed updating composition repository cache
    Wed Jan 6 08:17:01 tmstec.mtsu.edu pcastaction[7275] <Notice>: PodcastProducer::Actions::Merge: FINISH
    Wed Jan 6 08:17:10 tmstec.mtsu.edu pcastaction[7362] <Notice>: PodcastProducer::Actions::Encode: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=edit-core-intermediate-5.mov --output=edit-core-master.mov --encoder=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/S hared/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/ 0009CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Presets/master.plist } v.2
    2010-01-06 08:17:12.706 ruby[7362:e0b] * Failed updating composition repository cache
    Wed Jan 6 08:18:08 tmstec.mtsu.edu pcastaction[7362] <Notice>: PodcastProducer::Actions::Encode: FINISH
    Wed Jan 6 08:16:43 tmstec.mtsu.edu pcastaction[7249] <Notice>: PodcastProducer::Actions::Title: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --pqz=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/0009 CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Compositions/FlyingTitle .pqz --output=edit-core-intermediate-2.mov --editinfofile=edit-info.yaml --enable_author=yes --enable_copyright=yes --enable_date=yes --enable_organization=yes --enable_title=yes} v.2
    Wed Jan 6 08:16:44 tmstec.mtsu.edu qc2movie[7252] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:16:46.297 qc2movie[7252:903] * Failed updating composition repository cache
    Wed Jan 6 08:16:46 tmstec.mtsu.edu pcastaction[7249] <Notice>: PodcastProducer::Actions::Title: FINISH
    Wed Jan 6 08:16:47 tmstec.mtsu.edu pcastaction[7257] <Notice>: PodcastProducer::Actions::Merge: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input1=edit-core-intermediate-2.mov --input2=edit-core-intermediate-1.mov --duration=3 --pqz=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/0009 CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Compositions/SwingTransi tion.pqz --secondinput_is_maincontent --output=edit-core-intermediate-3.mov --editinfofile=edit-info.yaml --direction=0} v.2
    Wed Jan 6 08:16:48 tmstec.mtsu.edu qc2movie[7268] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:16:50.810 qc2movie[7268:903] * Failed updating composition repository cache
    2010-01-06 08:16:53.762 qttrackadd[7272:903] * Failed updating composition repository cache
    Wed Jan 6 08:16:54 tmstec.mtsu.edu pcastaction[7257] <Notice>: PodcastProducer::Actions::Merge: FINISH
    Wed Jan 6 08:18:10 tmstec.mtsu.edu pcastaction[7456] <Notice>: PodcastProducer::Actions::GetPosterImage: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=edit-core-master.mov --output=export-core-preview-image.png --no_fail} v.2
    Wed Jan 6 08:18:11 tmstec.mtsu.edu pcastaction[7456] <Notice>: PodcastProducer::Actions::GetPosterImage: Since no time was provided, the 'getposterimage' tool will grab a frame at 1/3 of the movie's duration (13.3711111111111 seconds)
    Wed Jan 6 08:18:11 tmstec.mtsu.edu pcastaction[7456] <Notice>: PodcastProducer::Actions::GetPosterImage: Successfully created poster image ('export-core-preview-image.png') by grabbing frame from 'edit-core-master.mov' at 13.3711111111111 seconds.
    Wed Jan 6 08:18:11 tmstec.mtsu.edu pcastaction[7456] <Notice>: PodcastProducer::Actions::GetPosterImage: FINISH
    Wed Jan 6 08:18:10 tmstec.mtsu.edu pcastaction[7457] <Notice>: PodcastProducer::Actions::Encode: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=edit-core-master.mov --output=export-plugin-quicktime-E43D860D-31BB-454F-83AD-B2ECFFED9E92.m4v --encoder=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/S hared/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/ 0009CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Presets/ipod.plist} v.2
    CoreMediaAuthoring: the source video is color-untagged. Assuming Rec 601...
    Wed Jan 6 08:18:25 tmstec.mtsu.edu pcastaction[7457] <Notice>: PodcastProducer::Actions::Encode: FINISH
    Wed Jan 6 08:16:35 tmstec.mtsu.edu pcastaction[7217] <Notice>: PodcastProducer::Actions::Documents2Movie: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=Copyright Law and Podcasting-C4931603-8008-4B71-B3FD-DEBC424C5AB0.pptx --pqz=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working/0009 CD91-99E3-4EA8-8089-F6CB75692CCF.pwf/Contents/Resources/Compositions/PageCurlTra nsition.pqz --image_duration=3 --transition_duration=1 --output=import-plugin-document-generated.mov --transition_direction=0} v.2
    Wed Jan 6 08:16:36 tmstec.mtsu.edu qc2movie[7233] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    2010-01-06 08:16:38.358 qc2movie[7233:903] * Failed updating composition repository cache
    Wed Jan 6 08:16:38 tmstec.mtsu.edu pcastaction[7217] <Notice>: PodcastProducer::Actions::Documents2Movie: FINISH
    Wed Jan 6 08:16:34 tmstec.mtsu.edu pcastaction[7214] <Notice>: PodcastProducer::Actions::Preflight: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb} v.2
    Wed Jan 6 08:16:34 tmstec.mtsu.edu pcastaction[7214] <Notice>: PodcastProducer::Actions::Preflight: Running preflight script [Script path: /Network/Servers/tmstec.mtsu.edu/Volumes/datastore/PodcastProducer/Shared/Caches/Resources/Tools/preflightscript] {Arguments: }
    Wed Jan 6 08:18:26 tmstec.mtsu.edu pcastaction[7471] <Notice>: PodcastProducer::Actions::Publish2Library: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --file=export-plugin-quicktime-E43D860D-31BB-454F-83AD-B2ECFFED9E92.m4v --outfile=publish-plugin-podcastlibrary-export-plugin-quicktime-E43D860D-31BB-4 54F-83AD-B2ECFFED9E92.yaml --type=production --mimetype=video/x-m4v --tag=TMSTEC --tag=STEM} v.2
    warning: peer certificate won't be verified in this SSL session
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    102 1022 102 1022 0 0 11127 0 --:--:-- --:--:-- --:--:-- 13447
    Wed Jan 6 08:18:27 tmstec.mtsu.edu pcastaction[7471] <Notice>: PodcastProducer::Actions::Publish2Library: Added file and created corresponding .ppi file to the Podcast Repository Bundle (File Path: '/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUI Ds/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Published/FD66ADF 4-AC4F-499A-A9E2-FACD2E690EBE.m4v', Format: com.apple.video.ipod.lc, MIME type: video/x-m4v, isPrivate: false, Tags:["TMSTEC", "STEM"])
    Wed Jan 6 08:18:27 tmstec.mtsu.edu pcastaction[7471] <Notice>: PodcastProducer::Actions::Publish2Library: Wrote outfile to 'publish-plugin-podcastlibrary-export-plugin-quicktime-E43D860D-31BB-454F-83AD- B2ECFFED9E92.yaml'
    Wed Jan 6 08:18:27 tmstec.mtsu.edu pcastaction[7471] <Notice>: PodcastProducer::Actions::Publish2Library: FINISH
    Wed Jan 6 08:16:35 tmstec.mtsu.edu pcastaction[7218] <Notice>: PodcastProducer::Actions::Publish2Library: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --file=Copyright Law and Podcasting-C4931603-8008-4B71-B3FD-DEBC424C5AB0.pptx --outfile=publish-plugin-podcastlibrary-import-plugin-document-original.yaml --type=original --index=1 --tag=TMSTEC --tag=STEM} v.2
    warning: peer certificate won't be verified in this SSL session
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
    102 1022 102 1022 0 0 6867 0 --:--:-- --:--:-- --:--:-- 7742
    Wed Jan 6 08:16:35 tmstec.mtsu.edu pcastaction[7218] <Notice>: PodcastProducer::Actions::Publish2Library: Added file and created corresponding .ppi file to the Podcast Repository Bundle (File Path: '/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUI Ds/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Published/28861BB 0-58A6-455F-84A8-244F523BFBC7.pptx', Format: , MIME type: application/vnd.ms-powerpoint, isPrivate: false, Tags:["TMSTEC", "STEM"])
    Wed Jan 6 08:16:36 tmstec.mtsu.edu pcastaction[7218] <Notice>: PodcastProducer::Actions::Publish2Library: Wrote outfile to 'publish-plugin-podcastlibrary-import-plugin-document-original.yaml'
    Wed Jan 6 08:16:36 tmstec.mtsu.edu pcastaction[7218] <Notice>: PodcastProducer::Actions::Publish2Library: FINISH
    Wed Jan 6 08:18:26 tmstec.mtsu.edu pcastaction[7472] <Notice>: PodcastProducer::Actions::WikiServer: START: [Working directory: /Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Shared/UUID s/A824CF1C-CC3E-4796-A841-C48B296D0977.prb/Contents/Resources/Working] {Arguments: --prb=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/Share d/UUIDs/A824CF1C-CC3E-4796-A841-C48B296D0977.prb --input=export-plugin-quicktime-E43D860D-31BB-454F-83AD-B2ECFFED9E92.m4v --docroot=/Network/Servers/tmstec.mtsu.edu/Volumes/data_store/PodcastProducer/S hared/Podcasts --url=http://tmstec.mtsu.edu:8171 --posting_url=http://tmstec.mtsu.edu/groups/tmstec/blog --username=tmstec --otp=KREqQ8ejIz5CdFVcDzuViQ== --pcast_server=https://tmstec.mtsu.edu:8170/podcastproducer --outfile=publish-plugin-wikiserver-692a736e889d71474136c62bc3bb1e08.yaml --mimetype=video/x-m4v} v.2
    Wed Jan 6 08:18:28 tmstec.mtsu.edu pcastaction[7472] <Critical>: PodcastProducer::Actions::WikiServer: Authentication to the Wiki Server failed

  • Performance problems post Oracle 10.2.0.5 upgrade

    Hi All,
    We have patched our SAP ECC6 system's Oracle database from 10.2.0.2 to 10.2.0.5. (Operating system Solaris). This was done using the SAP Bundle Patch released in February 2011. (patched DEV, QA and then Production).
    Post patching production, we are now experiencing slower performance of our long running background jobs, e.g. our billing runs has increased from 2 hours to 4 hours. The slow down is constant and has not increased or decreased over a period of two weeks.
    We have so far implemented the following in production without any affect:
    We have double checked that database parameters are set correctly as per note Note 830576 - Parameter recommendations for Oracle 10g.
    We have executed with db02old the abap<->db crosscheck to check for missing indexes.
    Note 1020260 - Delivery of Oracle statistics (Oracle 10g, 11g).
    It was suggested to look at adding specific indexes on tables and changing abap code identified by looking at the most "expensive" SQL statements being executed, but these were all there pre patching and not within the critical long running processes. Although a good idea to optimise, this will not resolve the root cause of the problem introduced by the upgrade to 10.2.0.5. It was thus not implemented in production, although suggested new indexes were tested in QA without effect, then backed out.
    It was also suggested to implement SAP Note 1525673 - Optimizer merge fix for Oracle 10.2.0.5, which was not part of the SAP Bundle Patch released in February 2011 which we implemented. To do this we were required to implement the SAP Bundle Patch released in May 2011. As this also contains other Oracle fixes we did not want to implement this directly in production. We thus ran baseline tests to measure performance in our QA environment, implemented the SAP Bundle patch, and ran the same tests again (simplified version of the implementation route ).Result: No improvement in performance, in fact in some cases we had degradation of performance (double the time). As this had the potential to negatively effect production, we have not yet implemented this in production.
    Any suggestions would be greatly appreciated !

    Hello Johan,
    well the first goal should be to get the original performance so that you have time to do deeper analysis in your QA system (if the data set is the same).
    If the problem is caused by some new optimizer features or bugs you can try to "force" the optimizer to use the "old" 10.2.0.2 behaviour. Just set the parameter OPTIMIZER_FEATURES_ENABLE to 10.2.0.2 and check your performance.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams142.htm#CHDFABEF
    To get more information we need an AWR (for an overview) and the problematic SQL statements (with all the information like execution plan, statistics, etc.). This analysis are very hard through a forum. I would suggest to open a SAP SR for this issue.
    Regards
    Stefan

  • Problem posting pdf's in iWeb podcast...

    I have created an iWeb site to share lecture audio and video with my students. This has worked extremely well without any problems. But recently I tried to start adding pdf's to the podcast so they could see the lecture slides, notes, etc on their Touches or iPhones and iTunes does not see them on the Podcast feed. This is driving me nuts.
    My usual method has been first to record the lecture audio, tweak it and add it to the podcast via iWeb. No problem. As a second step my students wanted the slides to look at on their Touches or iPhones while they listened. So after posting the audio, I started opening my lectures in Keynote "Share"ing them to iWeb as pdf's, then selecting the same podcast for a destination - iWeb creates a new entry with the pdf centrally located and everything. Should work perfectly right? Wrong.
    The PDF is definitely viewable online so I'm sure it's being uploaded to the server. It's just the iTunes step that's breaking down, and my students can't podcast the pdf's on their Touches or iPhones.
    I believe I'm adding the pdf's correctly - either sharing them directly from Keynote, or dragging and dropping them onto the single media placeholder, etc. Nothing works.
    In desperation I've even tried creating a new podcast page for JUST the pdf's and iTunes doesn't see those pdf's either. I get the "there are no downloadable files at the url" message. However, I can then drop an audio or video file into that new podcast and iTunes sees it immediately, downloads it as usual, etc. So it's only with pdf's which I thought iTunes was able to podcast without difficulty.
    I heard that iTunes 9 had some early trouble with pdf's but it was supposed to be fixed with last update.
    Does ANYONE out there have any suggestions or fixes for this?
    Please!?

    My problem exactly. I have successfully combined video podcasts and teaching notes on the same podcast page and up to now they have worked brilliantly. Suddenly this does not work. The .pdf files don't come in to iTunes? Can anyone help me to resolve this?

  • Here the SSCCE code for the prvious problem posted by me.

    Following is the SSCCE code for the program of search which is having the problem i have asked before.
    here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
    the problem is the same that firstly i want to make the panel invisible.
    (the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
    import javax.swing.*;
    import javax.swing.table.DefaultTableCellRenderer;
    import javax.swing.border.*;
    import java.awt.*;
    import java.awt.event.*;
    public class Temp extends JFrame implements ActionListener
         Container c;
         Toolkit tk;
         JLabel l1; int y=30;
         JPanel p1,p2,p3;     
         JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
         JButton btSearch,btView;
         ButtonGroup bgSearch;
         JTextField txtSearch; BoxLayout boxl;
         ImageIcon i1;JScrollPane sp1;JViewport vp;
         public Temp()
              super("Search-Address Management System");
              c=getContentPane();
              tk=Toolkit.getDefaultToolkit();
              setSize(1024,768);
              c.setBackground(Color.BLUE);c.setLayout(null);
              setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
              defineComponents();
              settingBounds();
              addListeners();
              addComponents();
              setVisible(true);
         public void defineComponents()
              p1=new JPanel();
              p1.setLayout(null);
              p1.setOpaque(false);
              p2=new JPanel();
              p2.setLayout(null);
              p2.setOpaque(false);
              p3=new JPanel();
              boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
              p3.setLayout(boxl);
              rbByName=new JRadioButton("First Name");
              rbByName.setOpaque(false);
              rbBySirName=new JRadioButton("Last Name");
              rbBySirName.setOpaque(false);
              rbByState=new JRadioButton("State");
              rbByState.setOpaque(false);
              rbByCity=new JRadioButton("City");
              rbByCity.setOpaque(false);
              rbByID=new JRadioButton("ID");
              rbByID.setOpaque(false);
              btSearch=new JButton("Search");
              bgSearch=new ButtonGroup();
              txtSearch=new JTextField();
              btSearch=new JButton("Search");
              TitledBorder tb=new TitledBorder("Search Criteria");
              TitledBorder tb1=new TitledBorder("Search");
              p1.setBorder(tb);
              p2.setBorder(tb1);
         public void settingBounds()
              rbByID.setBounds(20,30,50,20);
              rbByName.setBounds(120,30,100,20);
              rbByState.setBounds(20,70,80,20);
              rbByCity.setBounds(120,70,50,20);
              rbBySirName.setBounds(240,30,100,20);
              p1.setBounds(30,40,400,110);
              p2.setBounds(30,180,400,80);
              p3.setBackground(Color.ORANGE);
              txtSearch.setBounds(50,210,250,25);
              btSearch.setBounds(320,210,80,25);
              rbByID.setSelected(true);
         public void addListeners()
              btSearch.addActionListener(this);
         public void addComponents()
              p1.add(rbByName);
              p1.add(rbBySirName);
              p1.add(rbByState);
              p1.add(rbByCity);
              p1.add(rbByID);
              c.add(txtSearch);
              c.add(btSearch);
              c.add(p1);
              c.add(p2);
              bgSearch.add(rbByID);
              bgSearch.add(rbByName);
              bgSearch.add(rbBySirName);
              bgSearch.add(rbByCity);
              bgSearch.add(rbByState);
         public void drawtable()
              JTable t1=new JTable()
                  public Class getColumnClass(int column)
                    return getValueAt(0, column).getClass();
              if(y==30) //as temporay variable only to add the scrollpane once
                   sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
                   sp1.setBounds(30,300,660,380);
                   c.add(sp1); 
              JScrollPane sp=new JScrollPane(t1);
              sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
              sp.setMaximumSize(new Dimension(600,100));
              p3.add(Box.createRigidArea(new Dimension(600,20)));//  invisible filler to add space between two tables
              p3.add(sp);
              p3.revalidate();
              y=y+110;
         public void actionPerformed(ActionEvent e)
              if(e.getSource()==btSearch)
              drawtable();
         public static void main(String args[])
              new Temp();
    }Please reply with the code required to be added.

    the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
    You have a structure something like this:
    main panel
        - scroll pane
            - viewport
                - table panel
                    - table1
                    - table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
    And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested.

  • Problem posting message from adapter engine to IS

    Hello,
    We experience the next problem. We use JMS sender adapter to post message into XI. Message comes into the adapter engine and tries to post it into integration server. http://<host>:8000/sap/xi/engine?type=entry
    When posting we get the (very generic) error:
    Received HTTP response code 500..
    The Adapter engine does a retry every 5 minutes.
    After the 3th retry most of the status of the message in the adapter engine is set to NON_DELIVERED.
    However for what ever reason sometimes  the 2nd or 3th time the message does get processed to the IS.
    Is there anyone who experienced similar problems or does anyone know a solution for this.
    tnx
    Emile

    Hi,
    Is this the problem with JMS adapter or with any other Adapter.
    <b>8000</b>, is this the same port in smicm-->services. B'cos sometimes people might have a different instance number even.
    Cheers,
    Siva Maranani.

  • Problems Posting a Gallery

    I'm having problems updating a gallery. Worked fine before Leopard. Now the posting process is amazingly slow. Occasionally gives me a message at the end that publication has occurred and offers to display the gallery in the browser. That's okay for the moment, but after that it's impossible to open in a fresh Safari page. The message is that the server stopped responding. I checked my iDisk and the gallery file is there and it seems to be complete. I've tried backing out all added photos since my last successful upload and that isn't working either -- same process of a very long upload, occasional messages of successful publication but failure to actually make it to the web.
    Thanks for any ideas.
    Dan

    I received this reply from Apple. My password is not over twenty characters and I am not trying to publish to a password protected gallery. I can publish to my idisk, but not upload to the net. I am in the middle of the network troubleshooting section listed below but my network connections all seem to be working normally at this time. I am using Airport but am not experiencing any other problems.
    So still not sure what to do, but perhaps this response from the support team will help others in the same fix.
    Dear Dan,
    I understand that you are having difficulty publishing from Aperture to the .Mac servers. We apologize for any inconvenience you may have experienced with this issue.
    I will glad to assist you with this issue.
    CHANGE YOUR .MAC PASSWORD
    .Mac passwords longer than 20 characters may cause publishing issues. If your .Mac password is longer than 20 characters, go to http://www.mac.com/account and log in with your .Mac member name and current password. Click Password Settings, enter your new password twice, and click Submit. Enter your new password in the .Mac System Preferences and try publishing again.
    IF YOU ARE PUBLISHING A PASSWORD-PROTECTED SITE, CHANGE OR DISABLE ITS PASSWORD
    As with your own .Mac password, there are some types of passwords and user names that can cause issues when used with a password-protected site. If you create a password-protected site and get error messages when publishing, disable password-protection and then republish. If you still receive error messages, make sure your site's password and user name meet the criteria described in this article:
    iWeb: Password protected sites don't publish to .Mac
    http://www.info.apple.com/kbnum/n305506
    MAKE SURE YOU CAN UPLOAD TO YOUR iDISK
    If you are able to publish to a folder, try copying that folder to your iDisk. To access your iDisk, go to the Finder, and from the Go menu, choose iDisk > My iDisk. After the iDisk mounts on your desktop, copy the folder from your hard disk to the Documents folder in your iDisk. If copying the folder to your iDisk is successful, you can safely delete the folder from your iDisk, as copying it was simply a test to verify that basic connectivity to your iDisk is working as expected. If you receive an error message when copying the folder to the iDisk, you are most likely experiencing a network-related issue. For assistance, see the Network Troubleshooting section below.
    NETWORK TROUBLESHOOTING
    Many publishing issues are due to network-specific issues. For this section of troubleshooting I recommend that you first attempt to publish a small set of pictures instead of the entire set of 234 in order to save time.
    Try disabling any firewall, proxy servers, or network filtering software you may be using. (Apple can't provide specific configuration or setup information for your proxy server or firewall to allow .Mac publishing, as ports, IP addresses, and other information may change over time.)
    Next, simplify your Internet connection. For example, if you connect through multiple networking devices, such as hubs and routers, try connecting your computer directly to your modem and test to see if the issue occurs. If it does not, troubleshoot your networking devices one at a time.
    You might also verify your network connectivity and settings. You may wish to contact your Internet service provider (ISP) for assistance. For other information about troubleshooting network connectivity, please see the following article:
    Mac OS: Troubleshooting "A connection failure has occurred,"
    "The specified server could not be found," or Similar Messages
    http://www.info.apple.com/kbnum/n106798
    Another way to verify whether the issue is caused by your local network is to attempt to publish to .Mac from Aperture while connected to another network, such as one at an Apple Store. Find a store at http://www.apple.com/retail/storelist and click the link to make a reservation at the Genius Bar. There may be a fee associated with the visit.
    If you can publish to .Mac in Aperture from another network successfully, then you have isolated the issue to your own network or Internet connection.
    IF PUBLISHING STILL DOESN'T WORK
    If you are still unable to publish to .Mac with Aperture, please respond to this message with the following information:
    - A detailed description of the troubleshooting steps you have taken
    - A step-by-step description of what you were trying to accomplish when the error messages occurred
    - The exact text (if possible) of the error messages you received
    - A description of your network, including whether it has hubs, routers, cable or DSL modems, wireless routers (including AirPort), or proxy servers
    Please also answer these questions:
    - Does this issue occur with other computers on your network?
    - Does this issue occur when your computer is on a different network?
    - When were you last able to publish to .Mac successfully?
    Sincerely,
    Eddie
    .Mac Support
    http://www.apple.com/support/dotmac
    http://www.mac.com/learningcenter

  • Problem posting pictures on Facebook?

    After upgrading to Lion I found I could no longer upload photos to Facebook from my iMac. I am brought to what I think is the Finder dropdown menu and cannot maneuver anywhere from there to find and choose the photo I want to post. I have run Lion Cache Cleaner with its optimizing and maintenance programs to no avail. This posting I was always able to do readily with Snow Leopard. Any ideas???

    Upgrade to 10.7.3.  Remove the cache cleaner.  It is more trouble than it is worth, and causes more problems than it is worth.  Backup your data first, and then run the 10.7.3 combo update, then the Flashback patch:
    https://discussions.apple.com/docs/DOC-3261
    Cache cleaners are typically last resort troubleshooting measures and not "maintenance."  Mac OS X primarily only needs backing up as regular tasks.  Everything else is extra and not essential unless applications become incompatible.

  • Problem posting photos to facebook from Organizer

    I have always exported photos from Organizer and then posted those .jpg files on Facebook however, this has suddenly stopped working.  I am still exporting the same way to a .jpg file but Facebook now tells me that it can't read the file.  I have confirmed that the files are under 4mg and they look normal in Finder.  Nothing has changed on my computer and I'm baffled as to why this has happened.
    Please advise on how to fix this problem!
    Thanks!
    Holly

    Thank you.  I'm not sure how to capture a screen shot but the error is "Can't read Files.  Your photos need to be less than 4MG and saved as JPG, PNG, GIF or TIFF files"
    My file was exported as a .jpg and was 1.2 MB but I still got this error.
    I tried your suggestion listed above and restarted but when trying again, got the same error.
    I tried to export the file as a TIFF and it seems to work fine.  This seems to have something to do with the process of exporting to JPG.  I have been using the same workflow for a year and I'm not sure why it stopped working. 
    Thank You

  • Problems Post installation - Oracle 8i and Forms 6i

    Hello,
    This is with respect to the two issues I am encountering in Oracle. Kindly somebody help with these issues as it is urgent.
    PLEASE GO THROUGH EACH AND EVERY POINT BEFORE ARRIVING AT A CONCLUSION
    1. With the Post Oracle database installation
    2. Oracle forms connectivity to the Oracle database (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
    I will start with the 1st issue (Post Oracle database installation)
    Steps A01
    1. I unistalled an existing version 8.1.7 using the steps mentioned in the following link (http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php)
    2. I chose typical installation (default, all the rest of installation methods were default)
    3. Gave SID as ORCL_DB
    4. Created database by installation
    5. connected to SYS using default password - no problem
    6. Created another user usr01 and granted necessary privileges Was able to logon to the database using usr01. No problem
    But if I do a restart of the machine and then I am encountering an error ORA-27101: shared memory realm does not exist after which I am unable to connect to the database.
    ##### (PLEASE NOTE THAT I AM ABLE TO CONNECT TO ORACLE FOR THE FIRST TIME WITHOUT ANY PROBLEMS. THE ERROR IS THROWN IF WE REBOOT THE MACHINE AND TRY TO CONNECT TO ORACLE) ###
    The steps I tried to troubleshoot this
    a. Checked the oracle network admin directory. All the config files are there (TNSNAMES.ORA, SQLNET.ORA, LISTNER.ORA)
    b. did a tnsping
    c:\tnsping ORCL_DB
    NO PROBLEM WITH THAT. GETTING OK FOR THE PING
    c. Checked the oracle registries.
    Could find all these entries have the correct value:
    ORACLE_HOME - C:\ORACLE
    ORACLE_SID - ORCL_DB
    ORACLE_BASE - c:\oracle
    There were no extra slash or extra character with the registry entries.
    Now the the post forms installation scenario
    Steps A02 (FORMS WAS INSTALLED PRIOR TO ORACLE INSTALLATION)
    1. Installed forms (directory c:\orant)
    Steps A03
    1. Copied the contents tnsnames.ora file entries from oracle\network\admin directory to the orant\net80\admin\tnsnames.ora file
    2. Tried to connect to oracle forms (user : usr01, database : ORCL_DB).
    Got error : ORA-12154: TNS:could not resolve service name
    3. Created an environment variable : tns_admin with value c:/oracle/network/admin. Tried to connect again
    Now getting another error : unable to connect to the destination : ora-12203 (unable to connect to destination)
    I have installed forms and oracle in separate directories. Can somebody help to resolve these issues?
    Thanks in advance
    Chanaya

    Please find the content of the alert logfile
    Dump file C:\oracle\admin\PPDDEV\bdump\ppddevALRT.LOG
    Fri Nov 04 17:47:05 2011
    ORACLE V8.1.7.0.0 - Production vsnsta=0
    vsnsql=e vsnxtr=3
    Windows 2000 Version 5.1 Service Pack 3, CPU type 586
    Starting up ORACLE RDBMS Version: 8.1.7.0.0.
    System parameters with non-default values:
    processes = 150
    shared_pool_size = 52428800
    large_pool_size = 614400
    java_pool_size = 20971520
    control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
    db_block_buffers = 19200
    db_block_size = 8192
    compatible = 8.1.0
    log_buffer = 32768
    log_checkpoint_interval = 10000
    log_checkpoint_timeout = 1800
    db_files = 1024
    db_file_multiblock_read_count= 8
    max_enabled_roles = 30
    remote_login_passwordfile= EXCLUSIVE
    global_names = TRUE
    distributed_transactions = 500
    instance_name = PPDDEV
    service_names = PPDDEV
    mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
    open_links = 4
    sort_area_size = 65536
    sort_area_retained_size = 65536
    db_name = PPDDEV
    open_cursors = 300
    os_authent_prefix =
    job_queue_processes = 0
    job_queue_interval = 10
    parallel_max_servers = 5
    background_dump_dest = C:\oracle\admin\PPDDEV\bdump
    user_dump_dest = C:\oracle\admin\PPDDEV\udump
    max_dump_file_size = 10240
    oracle_trace_collection_name=
    PMON started with pid=2
    DBW0 started with pid=3
    LGWR started with pid=4
    CKPT started with pid=5
    SMON started with pid=6
    RECO started with pid=7
    Fri Nov 04 17:47:07 2011
    starting up 1 shared server(s) ...
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    Fri Nov 04 17:47:08 2011
    create controlfile reuse set database PPDDEV
    datafile 'C:\oracle\oradata\PPDDEV\system01.dbf',
    'C:\oracle\oradata\PPDDEV\temp01.dbf',
    'C:\oracle\oradata\PPDDEV\rbs01.dbf',
    'C:\oracle\oradata\PPDDEV\indx01.dbf',
    'C:\oracle\oradata\PPDDEV\tools01.dbf',
    'C:\oracle\oradata\PPDDEV\dr01.dbf',
    'C:\oracle\oradata\PPDDEV\users01.dbf'
    logfile 'C:\oracle\oradata\PPDDEV\redo01.log' size 1M,
    'C:\oracle\oradata\PPDDEV\redo02.log' size 1M,
    'C:\oracle\oradata\PPDDEV\redo03.log' size 1M resetlogs
    Fri Nov 04 17:47:12 2011
    Successful mount of redo thread 1, with mount id 1145344671.
    Fri Nov 04 17:47:12 2011
    Completed: create controlfile reuse set database PPDDEV
    dataf
    Fri Nov 04 17:47:12 2011
    alter database PPDDEV open resetlogs
    RESETLOGS after incomplete recovery UNTIL CHANGE 282235
    Fri Nov 04 17:47:12 2011
    Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Fri Nov 04 17:47:12 2011
    Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Fri Nov 04 17:47:12 2011
    Errors in file C:\oracle\admin\PPDDEV\udump\ORA02644.TRC:
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: 'C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Fri Nov 04 17:47:14 2011
    Thread 1 opened at log sequence 1
    Current log# 1 seq# 1 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
    Successful open of redo thread 1.
    Fri Nov 04 17:47:14 2011
    SMON: enabling cache recovery
    Fri Nov 04 17:47:15 2011
    Dictionary check beginning
    Dictionary check complete
    Fri Nov 04 17:47:15 2011
    SMON: enabling tx recovery
    Fri Nov 04 17:47:31 2011
    Completed: alter database PPDDEV open resetlogs
    Fri Nov 04 17:47:31 2011
    alter database PPDDEV character set WE8ISO8859P1
    Fri Nov 04 17:47:31 2011
    Thread 1 advanced to log sequence 2
    Current log# 2 seq# 2 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
    Thread 1 advanced to log sequence 3
    Current log# 3 seq# 3 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG
    Thread 1 advanced to log sequence 4
    Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
    Thread 1 cannot allocate new log, sequence 5
    Checkpoint not complete
    Current log# 1 seq# 4 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO03.LOG
    Thread 1 advanced to log sequence 5
    Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
    Fri Nov 04 17:47:40 2011
    Completed: alter database PPDDEV character set WE8ISO8859P1
    Fri Nov 04 17:47:40 2011
    alter database PPDDEV national character set WE8ISO8859P1
    Completed: alter database PPDDEV national character set WE8IS
    Fri Nov 04 17:47:40 2011
    alter database rename global_name to "PPDDEV"
    Completed: alter database rename global_name to "PPDDEV"
    Fri Nov 04 17:47:40 2011
    Restarting dead background process EMN0
    EMN0 started with pid=11
    Fri Nov 04 17:47:43 2011
    Shutting down instance (normal)
    License high water mark = 1
    Fri Nov 04 17:47:46 2011
    ALTER DATABASE CLOSE NORMAL
    Fri Nov 04 17:47:46 2011
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Fri Nov 04 17:47:48 2011
    Thread 1 closed at log sequence 5
    Fri Nov 04 17:47:48 2011
    Completed: ALTER DATABASE CLOSE NORMAL
    Fri Nov 04 17:47:48 2011
    ALTER DATABASE DISMOUNT
    Completed: ALTER DATABASE DISMOUNT
    archiving is disabled
    Starting up ORACLE RDBMS Version: 8.1.7.0.0.
    System parameters with non-default values:
    processes = 150
    shared_pool_size = 52428800
    large_pool_size = 614400
    java_pool_size = 20971520
    control_files = C:\oracle\oradata\PPDDEV\control01.ctl, C:\oracle\oradata\PPDDEV\control02.ctl, C:\oracle\oradata\PPDDEV\control03.ctl
    db_block_buffers = 19200
    db_block_size = 8192
    compatible = 8.1.0
    log_buffer = 32768
    log_checkpoint_interval = 10000
    log_checkpoint_timeout = 1800
    db_files = 1024
    db_file_multiblock_read_count= 8
    max_enabled_roles = 30
    remote_login_passwordfile= EXCLUSIVE
    global_names = TRUE
    distributed_transactions = 500
    instance_name = PPDDEV
    service_names = PPDDEV
    mts_dispatchers = (PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)
    open_links = 4
    sort_area_size = 65536
    sort_area_retained_size = 65536
    db_name = PPDDEV
    open_cursors = 300
    os_authent_prefix =
    job_queue_processes = 4
    job_queue_interval = 10
    parallel_max_servers = 5
    background_dump_dest = C:\oracle\admin\PPDDEV\bdump
    user_dump_dest = C:\oracle\admin\PPDDEV\udump
    max_dump_file_size = 10240
    oracle_trace_collection_name=
    PMON started with pid=2
    DBW0 started with pid=3
    LGWR started with pid=4
    CKPT started with pid=5
    SMON started with pid=6
    RECO started with pid=7
    SNP0 started with pid=8
    SNP1 started with pid=9
    SNP2 started with pid=10
    SNP3 started with pid=11
    Fri Nov 04 17:47:56 2011
    starting up 1 shared server(s) ...
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    Fri Nov 04 17:47:57 2011
    alter database mount
    Fri Nov 04 17:48:04 2011
    Successful mount of redo thread 1, with mount id 1145346003.
    Fri Nov 04 17:48:04 2011
    Database mounted in Exclusive Mode.
    Completed: alter database mount
    Fri Nov 04 17:48:04 2011
    alter database open
    Fri Nov 04 17:48:04 2011
    Thread 1 opened at log sequence 5
    Current log# 2 seq# 5 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO02.LOG
    Successful open of redo thread 1.
    Fri Nov 04 17:48:04 2011
    SMON: enabling cache recovery
    SMON: enabling tx recovery
    Fri Nov 04 17:48:05 2011
    Updating character set in controlfile to WE8ISO8859P1
    Completed: alter database open
    Fri Nov 04 17:48:20 2011
    Thread 1 advanced to log sequence 6
    Current log# 3 seq# 6 mem# 0: C:\ORACLE\ORADATA\PPDDEV\REDO01.LOG

Maybe you are looking for

  • Text field as email subject line or email body

    I have a form with a text field. I would like to have the contents of the text field in either the subject of the email or referenced in the body of the email. I am using a submit button for the email.

  • Why is officejet 6700 black ink more expensive than the other colors

    why is hp officejet 6700 black ink almost twice as expensive as the other colors?

  • Setting the classpath

    doing a jsp page which calls for: <%@ page import="java.sql.*" %> <%@ page import="javax.sql.*" %> <%@ page import="sun.jdbc.rowset.*" %> <%@ page import="java.util.*;" %> at the top of the page , so i downloaded the jar files that i needed and set t

  • How do I remove programs or add-ons?

    I use Firefox as a secondary browser. I installed "Bring me Sports" by Mindspark Interactive and I want to remove it. I installed it through Firefox and it is not showing up in my start menu. I use Windows Vista and my primary browser is Internet Exp

  • Hand tool / arrow tool missing.

    I really miss an arrow or handtool. When i zoom in on a photo i keep on drawing stripes or making unwanted selections as theres no way to unselect the brush or selection tools. There should be a no tool selected icon or hand  to scroll around a photo