Problems selling on iBooks (from outside US)

Hi,
I'm trying to start selling my books on iBooks, I'm from UK.
Does anybody know how to sort out the issue with the Tax Number? I don't have any US Tax number.....
Any help appreciated.

How to sign up for a paid books account if you are not a US citizen:
See this FAQ.
You will need an EIN from the IRS/US Govt., which you can obtain over the phone. If you attempt to publish as a company with Apple, you will be expected to show proof. Scan the relevant documents and send to Apple per their instructions.
Know that at this time, there are 32 stores are available for publishing/distribution, basically US, Canada, Australia, and most of Europe.

Similar Messages

  • I have problems with sync ibooks from iTunes to my iPad since i update to ios7

    i have problems with sync ibooks from iTunes to my iPad since i update to ios7

    first you plug your device into your computer, then you select the name of your device on the left side of itunes. then you select 'apps' from the top center of the itunes window, and you check the apps that you want to go from the computer to the device
    once you've done that, you press the 'apply' button in the lower right corner
    this will be the same for anything you want to go from the computer to the device
    you'll select the appropriate tab at the top, then only check information you want to go from the computer the device and then hit 'apply'

  • Delivering our iBook from outside U.S. - our story

    Hello Everyone,
    Last year when starting our iBook project I was hungry for as much reliable information as possible. This community was very helpful and I hope to be able to help anyone interested in creating and delivering their iBook. So I hope to provide recommendations for people to help them.
    My wife wrote a huge book on caring for Eclectus Parrots and I desinged the book using iBooks Author. We live outside the U.S. (Australia) and so we looked at several of the publishing houses to deliver our book for us. The 'process' of setting up tax ID's and handling all of that seemed daunting at the time - but it is not. I highly recommend that if you speak english well and can devote a day of phone calls, and about $100 you will do just fine and you will be 30% richer in the long run.
    Setting up an iTunes Connect account is easy. Getting an EIN from the U.S. is also reletivly easy. For some reason we had trouble last year contacting the tax office, but once we got through they were very helpful and within about 30 minutes we had our EIN. Next, you need your ISBN which are easy to get and once you pay the fee with Thorpe-Bowker you get your ISBN immediately. As long as your local tax info is correct, finishing the iTunes Connect tax and banking account is simple.
    When designing your iBook in IBA, make sure to follow the guidlines Apple provides. Be sure to have your copyright page in order (the page where you have your ISBN and your "all rights reserved" disclaimer).
    Once you are ready to deliver, uploading your book with iTunes Producer was sketchy. I had to upload it a couple of times (800+mb). I have not yet used the new version of iTunes Producer so that may be better. We are selling our book, so it took about 3 days to show up in the iBookstore, but it did and it is incredibly exciting to see your hard work in the store.
    If you are in the process of designing your book I highly recoomend you start planning your promotion process. Once it hits the iBookstore you will want people to know about it. It helps to have a small website setup. Start spreading the word through any relatable means possible.
    Overall, the process seemed daunting to start with, but it really isn't as hard as it seems. It is so rewarding to see your efforts come to fruition and even more - to see such a positive response from people. I hope this helps in any way.

    The 'process' of setting up tax ID's and handling all of that seemed daunting at the time - but it is not. I highly recommend that if you speak english well and can devote a day of phone calls, and about $100 you will do just fine and you will be 30% richer in the long run.
    If readers see this... its not typical!   There  are many threds in the iBooks Author discussion group. Follow the information and use the phone number given......
    1-267-941-1099   USA IRS Telephone
    http://www.irs.gov/pub/irs-pdf/fss4.pdf
    Calculat your time zone to call the  tax office around their 6.30pm.  The finish work at 7pm and most US people are home for dinner and not talking to tax officers.   It took me 10 minuutes and I am in Australia and purchased a $10 phone card and the  call cost be about $3.
    UK applicants will also need an IBAN number from their  bank.
    Next, you need your ISBN which are easy to get and once you pay the fee with Thorpe-Bowker you get your ISBN immediately.
    It is now not an Apple iBooks store requirement  - IF you  intend use  publishers other than Apples iBooks store, then you will need to comply with whatever that publisher/online book store requires.
    Once you are ready to deliver, uploading your book with iTunes Producer was sketchy.
    Sorry,  the  deliver process is easy and strait forward. prepare your  cover and  screen shots as they are requires in advance and  follow the   steps when iTunesProducer is opened by the "Publish" option in iBA.
    If you have problems... its OK to stop the process.. clarify your issue and then   go back to start again.
    We are selling our book, so it took about 3 days to show up in the iBookstore, but it did and it is incredibly exciting to see your hard work in the store.
    Clearence and  arrival in the iBooks store  depends on how busy the review team are and can  take 1- 14 days  or longerdepending on how busy they are.
    Overall, the process seemed daunting to start with, but it really isn't as hard as it seems.
    This is true,  most people  do not take time to  gather the information and follow the correct  procedure.
    Download teh assett guides   available from your iTunesConnect > Deliver your Content.
    And also read the Help files in iBA.
    As the poster and myself  illustrate...  everybody may have different results, the  best start is gathering all teh information  in the  various threads in the rerlated discussion groups and only post requests  for  advice if you get stuck...
    Hope your books are a huge success....

  • When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that cant be the problem.

    When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that can't be the problem. I was thinking maybe it is just because of the cold but, I don't like having my iPod doing that whenever I come back from the cold. However, I was in class too and this problem happened but it was inside! So I am very worried, I have dropped my ipod a few times but it hasn't fallen that hard to effect it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Weird Can not access class from outside package problem

    Hi, I have this problem and it seems the error message is very clear what the problem is but I did make the GeneralTestResult class PUBLIC already. What could be wrong? I did search for it but this is too general and didn't find any solution. Anyone can point out the problem? TIA.
    public abstract class GeneralTestResult
      public static int FAILING_THRESHOLE = 25;
      public abstract String getTestName();
      public abstract boolean isPassed();
      public abstract int getLeftEyeResult();
      public abstract int getRightEyeResult();
      public abstract Calendar getTestDate();
    // in a different file
    package VisionSaver.Tests.TestResults;
    import java.util.*;
    public class AcuityORContrastTestResult extends GeneralTestResult
      private String m_testName;
      private int m_leftEyeVision, m_rightEyeVision;
      private Calendar m_testDate;
    // in a different file
    package VisionSaver.Tests;
    import VisionSaver.Tests.TestResults.*;
    public class Acuity extends VirtualKeyboard implements ActionListener, Runnable, WindowListener
    AcuityORContrastTestResult r = new AcuityORContrastTestResult(...);
    }The compiling error is:
    "Acuity.java": GeneralTestResult() in VisionSaver.Tests.TestResults.GeneralTestResult is not defined in a public class or interface; cannot be accessed from outside package at line 529, column 40

    The GeneralTestResult class is a packaged class. Sorry, when I cut and paste, I didn't copy everything. So here is the complete GeneralTestResult file:
    package VisionSaver.Tests.TestResults;
    import java.util.*;
    public abstract class GeneralTestResult
      public static int FAILING_THRESHOLE = 25;
      public abstract String getTestName();
      public abstract boolean isPassed();
      public abstract int getLeftEyeResult();
      public abstract int getRightEyeResult();
      public abstract Calendar getTestDate();
    }From the compiler's message, it seems like the import is OK. It just won't allow me to access non-public class but my classes here are declared public. Any other ideas? TIA

  • When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

    When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

    katykittenoid wrote:
    the virtual keyboard is not the same as my computer keyboard
    Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
    Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

  • Help, CCX7 not triggered from outside, codec problem.

    Good Day..
    Here we have a scenario that is, a customer upgraded from CUCM4.2 and IPCC4 to CUCM7.0 and CCX7.0, in the old deployment, he used codec G.729 on IPCC and for sure for the voice prompts, and it used to work fine, now, after the upgrade, and using the same script, prompts and choosing G.729 to run on CCX, we are only able to listen to prompts and go into the AA menu options internally, but when calling from outside, nothing, it keeps ringing.
    I changed the codec back to G.711 from CCX’s service parameter, and called from outside, the CCX opens the script yes, but not playing any prompts…
    Although the gateway used to work with IPCC normally, I had configured codec G.729 and ran it under a special dial-peer dedicated for CCX trigger DN, still nothing changed..
    Any guides please.
    AT

    Does not matter if you are using MGCP or H323 the same rule applies for xcoding needs.  The bigger question is what has changed as part of the upgrade as there should be no changes from operations point of view.
    I would suggest checking if there are media resources such as Xcoder that for some reason did not register after the upgrade.  Also, is the site with the GW experiencing the issues remote from the UCCX server?  If you want to use G729 for calls into the GW simple change the region assigned to the GW's DP to use G729 between itself and the UCCX cti ports.
    HTH,
    Chris

  • Having a problem calling and displaying a page,from outside the class?? :-(

    Hi,
    I seem to be having a problem displaying a class from a different page, it is called but all i get is a blank page, even though when i compile and run it by itself it works fine?? I call it like:
    if(source == animateVMS)
                   {ImageSequence i = new ImageSequence();
                    i.setSize(Toolkit.getDefaultToolkit().getScreenSize());
                    i.show();
                    this.dispose();
                   }but it only displays a blank screen?? I think it is sumthing to do with the contructor of the following class?
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ImageSequence extends JFrame implements ActionListener
       {    static ImageSequence controller = new ImageSequence();
                 ImageSQPanel imageSQPanel;   
            static int frameNumber = -1;   
            int delay;   
            Thread animatorThread;   
            static boolean frozen = false;   
            Timer timer;    
            //Invoked only when this is run as an application.   
        public static void main(String[] args) {
              Image[] waving = new Image[10];        
              for (int i = 1; i <= 10; i++) {
                    waving[i-1] = Toolkit.getDefaultToolkit().getImage("images/T" + i + ".gif");
              JFrame f = new JFrame("ImageSequenceTimer");
              f.addWindowListener(new WindowAdapter() {
                 public void windowClosing(WindowEvent e) {               
                                System.exit(0);           
             //ImageSequence controller = new ImageSequence();
             controller.buildUI(f.getContentPane(), waving);
             controller.startAnimation();
             f.setSize(Toolkit.getDefaultToolkit().getScreenSize());       
             f.setVisible(true);    }    
             //Note: Container must use BorderLayout, which is the    
             //default layout manager for content panes.   
             void buildUI(Container container, Image[] dukes) {
                          int fps = 10;        
             //How many milliseconds between frames?       
             delay = (fps > 0) ? (1000 / fps) : 100;        
             //Set up a timer that calls this object's action handler       
             timer = new Timer(delay, new TimerListener());       
             timer.setInitialDelay(0);       
             timer.setCoalesce(true);        
             JPanel buttonPanel = new JPanel();        
             JButton play = new JButton("PLAY");       
             play.addActionListener(this);
             JButton stop = new JButton("STOP");       
             stop.addActionListener(this);
             JButton back = new JButton("Back");        
             back.addActionListener(this);
             imageSQPanel = new ImageSQPanel(dukes);       
             container.add(imageSQPanel, BorderLayout.CENTER);        
             container.add(buttonPanel, BorderLayout.SOUTH);       
             buttonPanel.add(play);       
             buttonPanel.add(stop);               
             buttonPanel.add(back);   
          public void start() {       
             startAnimation();   
          public void stop() {       
             stopAnimation();   
          public synchronized void startAnimation() {
                       if (frozen) {            
          //Do nothing. The user has requested that we            
          //stop changing the image.       
                         else {           
          //Start animating!           
          if (!timer.isRunning()) {               
          timer.start();           
          public synchronized void stopAnimation() {       
          //Stop the animating thread.       
          if (timer.isRunning()) {           
          timer.stop();       
       /**     * Listener for the play, stop, restart, and back buttons.     */   
       public void actionPerformed(ActionEvent e) {       
       JButton button = (JButton)e.getSource();       
       String label = button.getActionCommand();       
       if("PLAY".equals(label))           
       start();       
       if("STOP".equals(label))           
       stop();
       if("BACK".equals(label))
       {varsity v = new varsity();
        v.setSize(Toolkit.getDefaultToolkit().getScreenSize());
        v.show();
        this.dispose();
       /**     *  Listener for the animation timer.     */   
       private class TimerListener implements ActionListener {       
         public void actionPerformed(ActionEvent e)        {            
       //Advance the animation frame.           
       frameNumber++;             
       //Display it.           
       imageSQPanel.repaint();       
        class ImageSQPanel extends JPanel {       
        Image dukesWave[];        
        public ImageSQPanel(Image[] dukesWave) {           
        this.dukesWave = dukesWave;         }        
        //Draw the current frame of animation.       
        public void paintComponent(Graphics g) {           
        super.paintComponent(g);
        //paint background            
        //Paint the frame into the image.           
        try {               
        g.drawImage(dukesWave[ImageSequenceTimer.frameNumber%10],0, 0, this);            
        catch (ArrayIndexOutOfBoundsException e) {               
        //On rare occasions, this method can be called                
        //when frameNumber is still -1. Do nothing.               
        return;           
    }Could someone please try to help me fix my problem!
    Kind Regards
    RSH

    cheers that did the trick!! : - )
    I was wondeing if you could help me with one more thing, its about getting rid of an old page after you press a button to go to a new page! this.dispose doesnt wrk below:
            JButton back = new JButton("BACK");
            back.addActionListener(new ActionListener()       
                  public void actionPerformed(ActionEvent e)           
                       VowelmSound s = new VowelmSound();
                        s.setSize(Toolkit.getDefaultToolkit().getScreenSize());
                        s.show();
                        //this.dispose();           
             });        and this is main
    public static void main(String[] args)
    JFrame draw = new punjabidraw();   
    draw.setVisible(true);   
    }I was wondering what I could use to get rid of the old page??
    Kind Regards
    Raj

  • Why i cant access asa 8.4 thruogh asdm from outside interface ???

    hi all ,
    plz help e why i cant access asa asdm from outside interface
    my puclic ip on outisde is :
    x.x.55.34
    i changed  portf of asdm to 65000 because i have portforward  ,
    i tried to connect to my ip thriuogh asdm bu :
    x.x.55.34
    x.x.55.34:65000
    but no luck ,
    it succed if i try to connect locally
    here is my sh run command :
    ====================================================
    ASA5505#
    ASA5505# sh run
    : Saved
    ASA Version 8.4(2)
    hostname ASA5505
    enable password qsddsEGCCSH encrypted
    passwd 2KFsdsdbNIdI.2KYOU encrypted
    names
    interface Ethernet0/0
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    switchport access vlan 2
    interface Vlan1
    nameif ins
    security-level 100
    ip address 10.66.12.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 50
    ip address x.x.55.34 255.255.255.248
    boot system disk0:/asa842-k8.bin
    ftp mode passive
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network obj-0.0.0.0
    host 0.0.0.0
    object network localsubnet
    subnet 10.66.12.0 255.255.255.0
    description localsubnet
    object network HTTP-Host
    host 10.66.12.249
    description web server
    object network HTTPS-HOST
    host 10.66.12.249
    description Https
    object network RDP-Host
    host 10.66.12.122
    description RDP host
    object network citrix-host
    host 10.66.12.249
    description citrix
    object service rdp
    service tcp destination eq 3389
    object service https
    service tcp destination eq https
    object service citrix
    service tcp destination eq 2598
    object service http
    service tcp destination eq www
    object network RDP1
    host 10.66.12.249
    object network HTTPS-Host
    host 10.66.12.249
    object network CITRIX-Host
    host 10.66.12.249
    object-group network RDP-REDIRECT
    object-group network HTTP-REDIRECT
    object-group network HTTPS-REDIRECT
    object-group network CITRIX-ICA-HDX-REDIRECTION
    object-group network CITRIX-ICA-SESSION-RELIABILITY-REDIRECTION
    object-group service CITRIX-ICA-HDX
    object-group service CITRIX-SR
    object-group service RDP
    object-group network MY-insideNET
    network-object 10.66.12.0 255.255.255.0
    access-list outside_in extended permit tcp any host 10.66.12.249 eq www
    access-list outside_in extended permit tcp any host 10.66.12.249 eq https
    access-list outside_in extended permit tcp any host 10.66.12.249 eq 2598
    access-list outside_in extended permit tcp any host 10.66.12.122 eq 3389
    access-list outside_in extended permit tcp any host 10.66.12.249 eq citrix-ica
    access-list outside_in extended permit tcp any host x.x.55.34 eq 65000
    access-list outside_in extended permit tcp any host x.x.55.34 eq https
    access-list outside_in extended permit ip any any
    pager lines 24
    mtu ins 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-645.bin
    no asdm history enable
    arp timeout 14400
    object network localsubnet
    nat (ins,outside) dynamic interface
    object network HTTP-Host
    nat (ins,outside) static interface service tcp www www
    object network RDP-Host
    nat (ins,outside) static interface service tcp 3389 3389
    object network HTTPS-Host
    nat (ins,outside) static interface service tcp https https
    object network CITRIX-Host
    nat (ins,outside) static interface service tcp citrix-ica citrix-ica
    access-group outside_in in interface outside
    route outside 0.0.0.0 0.0.0.0 62.109.55.33 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    aaa authentication http console LOCAL
    aaa authentication ssh console LOCAL
    http server enable 65000
    http 10.66.12.0 255.255.255.0 ins
    http 0.0.0.0 0.0.0.0 outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ca trustpoint _SmartCallHome_ServerCA
    crl configure
    crypto ca certificate chain _SmartCallHome_ServerCA
    certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
        308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
        0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
        30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
        13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
        0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
        20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
        65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
        65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
        30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
        30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
        496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
        74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
        68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
        3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
        63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
        0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
        a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
        9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
        7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
        15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
        63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
        18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
        4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
        81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
        db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
        7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
        ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
        45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
        2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
        1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
        03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
        69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
        02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
        6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
        c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
        69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
        1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
        551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
        1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
        2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
        4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
        b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
        6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
        481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
        b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
        5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
        6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
        6c2527b9 deb78458 c61f381e a4c4cb66
      quit
    telnet 0.0.0.0 0.0.0.0 outside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    management-access outside
    dhcpd address 10.66.12.160-10.66.12.180 ins
    dhcpd dns 212.112.166.22 212.112.166.18 interface ins
    dhcpd enable ins
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    username test password P4ttSdddd3SV8TYp encrypted privilege 15
    username ADMIN password 5dddd3ThngqY encrypted privilege 15
    username drvirus password p03BtCddddryePSDf encrypted privilege 15
    username cisco password edssdsdOAQcNEL encrypted privilege 15
    prompt hostname context
    call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DD
    CEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
    : end

    For access over VPN you need:
    management-access inside
    and don't forget:
    ssh inside
    http inside
    I'm guessing you forgot to grant ASDM (http/https) access to the IP addresses used by the VPN?  Can you SSH?  If not, that is your problem to solve first.

  • Can't Open File Explorer -- How can I reset the Quick Access Toolbar from outside of File Explorer?

    First of all, this is not a virus. This is my a bug within windows explorer itself.
    So, I added the properties button to the QAT, and it displayed it as an expandable menu, like this: ";" but with small arrows like this: ">". didn't want this, I wanted to click on it and immediately display the properties of the file
    to me. So, I hovered over it, right-clicked on "Properties" in this menu and added it to the QAT. Of course, this crashes File Explorer. Now whenever I try and open it, it crashes, so I have to assume that the corrupted button has been saved.
    So, my question is: How do I reset the QAT from OUTSIDE of file explorer? Regedit magic? Any ideas?
    Thanks for stopping by,
    Trolleyman.
    Edit: Just so you know, I can navigate through my systems files using the 7-zip file manager. Phew.

    Thanks from me  too, Niki. This first happened with Windows 8.0 File Manager a week ago,, and despite much research I couldn't  discover the cause so eventually I resorted to restoring  the system drive from backup (luckily I make daily backups, 
    so didn't lose   much  work).
    Without  knowing the cause  a  few days later I again tried to alter  the Quick Access  Toolbar  and the problem reappeared.  Should  I again resort to restoring the entire system drive, the thought horrified me. But
    luckily while doing a bit more research prior to resorting to the same drastic recovery, I cane  across this post  of yours and it worked!
    It doesn't  seem  to be  happening with Office 2007's   or  Wordpad's  Quick Access Toolbar,  so presumably it's a File Explorer bug  (a.k.a. Windows Explorer in Windows 7, of course). Have Microsoft recorded this as
    a  bug -- if not,  why not  -- and when  are they coming up with a fix?

  • Pages (or Numbers) Template Cannot Be Opened From Outside the Application

    Ever since the upgrade to Mavericks, I cannot open a Pages (or Numbers) template without being asked.....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything.
    But this template is already in my Template Chooser.
    So the only way to open a template in Pages (or Numbers) is to open the application first, and then click "New", and choose the template.
    I can't figure out a way to open the template from outside the application, which is very very handy, rather than having to open the application every time that I want to access a template.
    How can I open a template simply by clicking on it?

    Yes, the problem is that opening the template from outside of the application will not open the application, showing the document.  I only get this....
    Do you want to add this custom template to the Template Chooser?  Then my only options are Cancel or Add to Template Chooser.
    If I cancel, it won't open anything. 
    But this template is already in my Template Chooser.
    Put your Pages or Numbers document on your desktop and open it by double-clicking it, and you'll understand.  You can't do it, even if the template is in your template chooser.
    The only way to do this now is to open the application, select "New", and the select the template.  So you cannot open a template from outside the application....only from within.

  • How can I use an American credit card to pay for a membership from outside the US?

    How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
    Has anyone else had this problem? Any help would be much appreciated!

    Hi Batt5721,
    Welcome to Adobe Forums.
    The address and the country on the Credit Card should match the billing address then only payment would be possible.
    Thanks
    Garima

  • Opening a project in Eclipse by using a java program from outside..

    Hi friends,
    I have a java program which will open the Eclipse editor..now i want to open a file , in a specifeid path, in that eclipse. I completed opening the eclipse editor and also i m fetching the file which in a particular path..my problem is i couldnt open that file in eclipse by using my java program..
    i donno how to open a particulat file or proj in the eclipse from outside java prog.
    thanks,
    Krishna

    Try this:
    Error "This project contained a sequence that could not be opened" 

  • Posting of electricity procured from outside and manufactured inhouse

    Hi Experts,
    Kindly guide us as to how we need to go about the below scenario in SAP.
    We are in cement industry. We procure electricity from outside and also we purchase gas and manufacture electricity for the purpose of use in our factory.
    We do not have a problem with externally procured electricity.
    With respect to electricity manufactured inhouse
    The mapping as of now is done as below:
    Accounting Entries:
    When I use gas for conversion into electricity T code COR6N
    Dr Natural Gas consumption   100    P&L
            Cr Stock-fuel oil                          100  B/S
    Dr Stock -Semi Finished Goood (electricity)             120  B/S
              Cr Cost of goods Manufactured                      120  P&L
    At the time of consumption of the electricity in Production T Code MIGO (Goods Isssue)
    Dr    Electricity Consumption                      120        P&L
             Cr  Dr Stock -Semi Finished Goood (electricity)    120  B/S
    Now our problem is that the expense for inhouse manufactured electricity is recorded twice as per our client.
    Once when we are doing COR6N and the next time at the time of posting consumption to Production order using MIGO GI.
    Kindly let us know how to overcome the above issue and see to it that the expense is booked only once.
    Regards,
    Hari

    Hi,
    Thank you for the quick response.
    Vimal As per what you are saying that the expense is not booked twice, when I see the electricity consumption it is overstated and also the same is posted in gas consumption.
    So when I see the both the GL accounts, the amount is appearing in both the GL accounts which I think should reflect only in one GL.
    Regards,
    Hari

  • Trying to access my 851w from outside my lan, but can access inside fine

    Hi,
    I purchased a 851w to use as my home router and to learn more about the cisco IOS. I have been spending some time studying for CCENT/CCNA and so far I have enjoyed learning as I go. However, I am having problems accessing this router from a remote location via ssh. I can access it just fine from my lan, but not outside it from another location. Currently, I am not using this router for internet access or anything else other than learning about the IOS, and it is connected to a basic dlink wireless router dir-615. I have port forwarding setup on the dlink that any traffic coming in on port 22 is directed to the 851w at 192.168.0.150. I also have the 851w connected with a crossover cable to a switch that is connected to the dlink router.
    Like I said, I can connect just fine from my lan, but can't connect from outside. I have tried a few different things but nothing works. I also use Teraterm to connect, but have tried Putty too. I also use ddns to access it, but I have also tried the wan ip address of the dlink with no luck.
    Could someone please take a look at my very basic running config and explain what I might need to do different?
    Thanks in advance.
    Sean

    Hi and thanks a bunch for your quick response.
    No, I can't ping anything other than my main router which I have setup as the gateway so why is that? For example,
    ip default-gateway 192.168.0.1
    Wouldn't it automatically send anything it doesn't know about to the 192.168.0.0/24 router?
    I have one of the switch ports, Fast Ethernet 0, connected to another switch connected to the dlink router. I have tried different ports but it didn't change anything. I don't have anything connected to the wan port of the 851w. I was trying to simulate remote access of a switch on an internal network. My next step would be to make the 851w my default router and then try to access it from the outside, but I wanted to succeed this way first.
    optimus#show ip int br
    Interface IP-Address OK? Method Status Protocol
    Dot11Radio0 unassigned YES unset administratively down down
    FastEthernet0 unassigned YES unset up up
    FastEthernet1 unassigned YES unset down down
    FastEthernet2 unassigned YES unset down down
    FastEthernet3 unassigned YES unset up down
    FastEthernet4 unassigned YES unset administratively down down
    Vlan1 192.168.0.150 YES manual up up
    Yes, my internal pc is on the 192.168.0.0/24 subnet.
    Best Regards,
    Sean

Maybe you are looking for