Problems updating Acrobat 6.0 (from CS Premium package)

Hi -
I installed Adobe Acrobat 6.0 as part of a CS install.
But when I try to update it (6.0) I get to the point when it says something like "insert disk 1 Adobe Acrobat" and is looking for an AcroPro.msi file.
I don't have this file - I have an exe file that installed Adobe Acrobat 6.0.
So what can I do to make get these updates to work? I'm sitting here with the disks for Adobe Creative Suite Premium and CANNOT update the darn Acrobat.
What do I need to to - I've searched all over the internet and these forums and can't find anything .
Please help!!

I don't know about within CS. However, with older versions it is often best to download the updates from Adobe (the Download>Updates site) and do the updates locally. Also, you must do them in order, unless it says otherwise.

Similar Messages

Problem updating Acrobat X

I am having problems updating Acrobat X on Windows 7. Everytime an update runs there is a 1310 or 1321 error. Despite repeatedly changing UAC permissions for the files indicated in the errors the errors continue. My first issue was printing problems, which I have worked around, now I can't update, which supposedly will solve the printing issues. I am running the update as the administrator, have tried removing and reinstalling and am getting very frustrated. Any suggestions?

Failure to update via the online process is USUALLY caused by 1 of 2 things
1-firewall or antivirus settings
2-windows security settings
The USUAL fix is to manually download the files and run the updates outside of the Internet
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative
for the individual product http://www.adobe.com/downloads/updates/

Problems updating Acrobat Pro X to 10.1.0

I tried to update my Windows Acrobat Pro X (from 10.0.3 to 10.1.0) and have been getting some questionable behavior (hard to categorize for these general ones). However, what I did notice specifically is when performed the update (Have done it a couple of times hoping to "repair" the fix), I get an "Error 1328: Error applying patch to file C:\Config.msi\PT56C.tmp....". I selected "Ignore" (which may have been my mistake) and allowed the update to continue. Now, "Tools\Delete page" no longer works (what I've discovered so far) and I get an unpredictable crash/debug session that comes up (using MS Visual Studio).
I've read so far that the only way to eliminate this update is to "start all over" (Didn't see anything on this forum).
Any one else experience this and is there a better fix for it?
Thanks and cheers....Steph

John,
Thanks for the fast reply.
I downloaded the update directly from the Adobe website and installed it locally. I also disabled AVG to make sure security did not get in the way. I am running WinXP SP3.
As I mentioned, tried a couple of times. Same error 1328 result and ensuing problems with Acrobat. Just to be sure, Acrobat was working great before I installed this update I wish I could roll back the update and get Acrobat back to how it was....
Steph

Problem update JTextArea with message from thread

I have a JTextArea to present the actually status of an running thread. The thread sends strings like: System.out.println("Reading in new message...");to the standardoutput.
The problem is, that my application freezes when it should update the JTextArea. Any idea and what type of actionListener is recommend to use for the JTextArea?
try
   BufferedReader breader = new BufferedReader(new InputStreamReader(System.in));
   statusmsg = breader.readLine();
   statusTextArea.append(statusmsg);
catch (Exception e){};Cheers

In general, you can't update the Swing stuff from "side" threads. Side threads talk with the Swing event thread by creating Runnable objects which contains the necessary data (in your case, for instance, the JTextArea or its parent panel/window, and the text to append), and then invoking SwingUtilities.invokeLater() to have this object run() method called by the Sing event thread. See:
http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html

Problem updating Acrobat 8.0 on Mac

I have Acrobat 8.0 on mac running 10.6.7. When I try to update acrobat the updater says this
Also I tried to uninstall Acrobat and the uninstaller has an X on it and is not available.
This is all in an attempt to update Acrobat 8.0.0 to hopefully allow scanning with HP scanner.
I recently upgraded to 10.6..7 on the mac and now acrobat does not communicate with scanner.
Any help would be great.

Have you tried following the path and deleting the offending file? Then Repair Permissions, restart your computer and try the update again.

Major Problem updating to Photoshop 2014 from Photoshop CC and Opening Lightroom

windows 7 64 bit
Updated from Photoshop CC and Lightroom 5 to Photoshop 2014 and Lightroom 5.5. Now Cannot install and run Extension manager and extentions in Photoshop 2014 but continue to work in Photoshop CC. Lightroom 5.5 refuses to open but Lightroom 4.2 continues to function sort of.
Takes two double clicks to open Photoshop CC!
Been on to Adobe support team twice. Uninstalled Photoshop 2014 and Lightroom. Used CC app to update to Photoshop 2014 but now exactly the same problems exist as before
Help please!

Roger, it seems you are facing 2 separate issues, one with not being able to launch Lr 5.5 and other with not being able work with extensions in PS CC 2014.
So, here is what i would suggest:
For the Lightroom launch issue, follow the solutions mentioned under Lightroom does not launch or get error: "Develop module is disabled" after 5.5 update
And for the Extensions not available in PS CC 2014, check this out. Extensions and Extension Manager not available in Photoshop CC 2014
Also, check this for more details. http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html
Hope that Helps.
Cheers!
~ Arpit Kapoor

Problem updating infoobject master data from a dso.

Hi all,
i'm updating the master data of an infoobject from another ods, the two table have the same key.
When i update the infoobject with full repair i get errors about duplicate records and the data load stops, when i delete the request and launch the infopackage again all goes well but it seems it doesn't insert any new record in the master data, what could be the problem?
If you need more info ask me.
Thanks a lot.
Stefano

Hi Sadeesh,
i checked the master data table and it seems it has been updated, i check some order number with recordmode N added today in the dso and the entries were in the infoobject, though i don't know why in the request tab it shows 0 added records.
To be completely sure tomorrow i will check again the number of entries in the 'p' table of the infoobject.
Anyway this is the exact error message i get:
7 duplicate record found. 6478 recordings usedin table /BIC/XZDOCDSO
7 duplicate record found. 6478 recordings usedin table /BIC/PZDOCDSO
After that i run the change run for the IO and when i launch again tha data load it goes well.
Regards
Stefano

Problems Installing Acrobat X Pro (CS6 Design Premium) on Win7

I have searched these forums and have tried several "fixes" that have been suggested and still cannot seem to get this program installed. I was upgrading from CS5 with Acrobat 9. I uninstalled Acrobat 9 already. The folder "Config.Msi" keeps reverting back to being locked with no permission to access, which I think might be part of the problem. All help is appreciated!
Here is the error page:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DS013, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 4 warning(s)
WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Config.Msi\36ffc.rbf. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\36ffc.rbf. Verify that you have access to that directory.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

I was able to rectify my problems through tech support. They had me run Acrobat Cleaner to remove all of Acrobat 9, then install using the AcroPro.exe from the DVD instead of the autorun when you put the disc in. Thanks.

Having problems updating Adobe Reader MSI from 10.1.0 to 10.1.4

Hello,
I have read online that you can slipstream the adobe update into the original 10.1.0 installer. Here is what I have tried.
I have downloaded the original 10.1.0 MSI file and ran msiexec /a C:\Adobe\Downloads\AdbeRdr1010_en_US.msi, which during the admin install, I have installed it into C:\Adobe\AIP
I then run msiexec /a C:\Adobe\AIP\AcroRead.msi /p C:\Adobe\Downloads\AdbeRdrUpd1014.msp, and get the following error message:
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
If I double click on the MSP file in Windows Explorer, it opens it up and wants to update adobe reader, however I can not get this to work.
Any assistance is appreciated, I don't know what I am doing wrong, tried on two different systems one 32bit and 64bit.
Craig.

When I say deploy I mean deploy to all my PC's in my domain (350+) via AD.
What I normally do is:
1. Extract the Adrobe reader .msi package from the .exe by running the following command:
E:\AdobeRdr\1014_original\AdbeRdr1014_en_US.exe -nos_o"E:\AdobeRdr\1014_original\Extraction\AdbeRdr1014_en_US" -nos_ne
2. Emulate a Network install of the .msi package by running the following command:
msiexec /a E:\AdobeRdr\1014_original\Extraction\AdbeRdr1014_en_US\AcroRead.msi
3. Emulate a Network install of the .msi packing and apply the update by running the following command:
msiexec /a E:\AdobeRdr\1014_original\1014wUpdate\AcroRead.msi /p E:\AdobeRdr\1014_original\Extraction\AdbeRdr1014_en_US\AdbeRdrUpd1014.msp
4. Use the Adobe customisation tool to create a custom .mst file
5. Copy the extracted folders, .msi, .mst and setup.ini to the \\SHARE
Is there a better way of doing this?
What it looks like to me is Adobe have not updated the product code on the install files, so when I install the .msi it sees the existing one matches the update and generates the error.
I look forward to you feed back reguring the above.

I am having problems updating my iPad 2 from version 4.3 to latest software version? Any suggestions?

I recently tried to update my ipad2 from version 4.3 to latest version on two separate laptops after updating iTunes on them. It got to the part where it was going to update my iPad software and the update failed. Any suggestions?

iPad 2 WiFi
http://appldnld.apple.com/iPhone4/041-1960.20110721.UsAO4/iPad2,1_4.3.5_8L1_Rest ore.ipsw
iPad 2 G3
http://appldnld.apple.com/iPhone4/041-1961.20110721.zigyd/iPad2,2_4.3.5_8L1_Rest ore.ipsw
iPad 2 Verizon
http://appldnld.apple.com/iPhone4/041-1962.20110721.rWxrf/iPad2,3_4.3.5_8L1_Rest ore.ipsw

Downloading dreamweaver only from design premium package CS5...

I just need Dreamweaver redownloaded... No longer have the CDs... I tried downloading Dreamweaver only but it says the registration number is incorrect... I don't want to download the entire package.. the rest works fine... help!

It's not possible. Suite packages require to use the suite installers. You have to download the whole Design Premium.
Mylenium

Problems installing Acrobat 9I

I am having trouble installing Acrobat 9, I originally installed it as part of the Creative Suite 4 (Design Premium), acrobat installed okay as part of the suite, but I couldn't create pdf's from word or safari.
I uninstalled acrobat 9, the rest of the suite remains and works perfectly, now when I try to reinstall acrobat 9 my mac sits at the installation screen! Do I need to uninstall the complete suite?
My MBP is only a week old and has very little else on it yet!
Any help will be appreciated.

I have the same problem. I recently upgraded from CS2 (Premium) to CS4 (Standard) and, although I needed help from Adobe Tech Support, I installed the suite successfully. However, Acrobat Pro 9 did not update like the other applications so I called in for more help. That was a bust and, as a matter of fact, after removing some components from the Acrobat.app folder as directed, Acrobat wouldn't even open any more. Consequently, I trashed it and started over.
Unfortunately, now I have the same problem the first user has. Installations proceeds normally until the "Preparing to Install..." screen at which it just stops. It doesn't freeze up or anything, it just dies.
Sure hope somebody can offer a solution.
Thanks in advance.
Bill

Error 2503 when updating Acrobat

I am attempting to update my Acrobat and i encounter "Error 2503 called RunScript when not marked in progress". I am operating in Windows 8 and do not know whether this is a function of the operating system. I had the same problem updating Acrobat Reader.

This is apparently a Windows issue (see http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-2503 -called-runscript-when-not-marked-in/76e72d98-cbef-432f-8f6f-40417d139bc1). When doing updates you should be logged in as the adminstrator and have anti-virus disabled. It may also be an issue with AA9 on a Win 8 system, particularly if 64-bit. You may have to run AA9 in a compatibility mode. When updates fail from within Acrobat, it is time to try downloading the updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and installing the updates in order (generally updates are not cummulative in Acrobat).

Problem in generate Java from PL SQL package in Jdeveloper

Hi
i have problem in create java class from PL SQL package in JDeveloper.
I use Database navigator of jdeveloper and right click on a package and choose Generate Java then in Jpublisher window choose my view Controller and accept other default values.
I call methods of generated class in the Action of a button in my JSP page, but when I click the button it throw null pointer exception !!! i fund one of generated method return null and it lead to this exception.
protected DefaultContext __tx = null;
public DefaultContext getConnectionContext() throws SQLException {
if (__tx==null){
__tx = (getConnection()==null) ? DefaultContext.getDefaultContext() : new DefaultContext(getConnection());
    return __tx;
public Connection getConnection() throws SQLException
    if (__onn!=null) return __onn;
     else if (__tx!=null) return __tx.getConnection();
     else if (__dataSource!=null) __onn= __dataSource.getConnection();
     return __onn;
i try to generate class in Model project and create DataControl for that and use method action but noting change and i get null pointer again!!
Jdeveloper Versino = 11.1.1.7.0

Let me ask you another question: Why do you generate java from the package at all?
Where do you want to call the package?
Back to your question: you should see code like
    public void setDataSourceLocation(String dataSourceLocation) throws SQLException {
        javax.sql.DataSource dataSource;
        try {
            Class cls = Class.forName("javax.naming.InitialContext");
            Object ctx = cls.newInstance();
            java.lang.reflect.Method meth = cls.getMethod("lookup", new Class[] { String.class });
            dataSource = (javax.sql.DataSource) meth.invoke(ctx, new Object[] { "java:comp/env/" + dataSourceLocation });
            setDataSource(dataSource);
        } catch (Exception e) {
            throw new java.sql.SQLException("Error initializing DataSource at " + dataSourceLocation + ": " + e.getMessage());
in the generated code. This code look up a datasource (which you have defined e.g. on the Weblogic Server) by calling the method
setDataSourceLocaltion("jdbc/HRConnDS");
This look up the datasource nad stores it in the class variable.
Timo

Problem updating from Acrobat 10.1.10 to 11. Error 1001, and am told to connect to update server. When I activated the installer, message said Install failed, contact manufacturer for assistance, so I am.

I am using a 2011 MacBook Pro, running OS X 10.9.5. Have been using Acrobat 10.1.10, but got a pop-up notice from Adobe today, saying that it had been awhile since last logged on and my software was due for an update. However, after downloading the update Acrobat 11, the updater seems to be unable to FIND the file to update, so it asks me to select the file to update. When I found it, the file icon was grayed out, and wouldn't allow me to select it. Gave me a message for "Error 1001". I'm an experienced Mac user, but not a programmer, so I don't know what that means. When I tried to run the installer from the downloaded file, it stopped, saying "Installation Failed" due to encountering an error—which was NOT named or numbered—and that I should contact the manufacturer for assistance. Which I am ATTEMPTING to do, but it appears to be impossible to actually get direct help.
Suggestions, or better yet, direct answers, would be appreciated.

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

Problems updating Acrobat 6.0 (from CS Premium package)

Similar Messages

Maybe you are looking for