Problems with CS6 Extended/Maverick

CS6 is acting erratically after installing OSX Maverick. I have the latest version of CS6 and am not running any third party add-ons. The program will freeze and also zoom in and out erratically. Was working fine before the OSX upgrade. Please advise!

I had the same issue, I created a password for my user profile and entered that. It worked with no more issues

Similar Messages

Problems with PHCS6 extended - lighting effects (filters)

What can I do to fix my lighting effects? It blocks the entire program Photoshop CS6 at that moment I click on it.
I've tried reinstalling the software with no results
. I would appreciate any help
Message was edited by: mclarice

Hi, mjarrott
My system is Windows 7. (GB Ram 8.00 on a Dell Optplex 980) And Photoshop is my newly purchased in Portuguese, because I'm Brazilian. The problem appears when I try to use the Filters menu - finishes - lighting effects.
My old version worked just fine ...
De: mjarrott [email protected]
Enviada em: quinta-feira, 8 de novembro de 2012 16:16
Para: mclarice
Assunto: Problems with PHCS6 extended - lighting effects (filters)
Re: Problems with PHCS6 extended - lighting effects (filters)
created by mjarrott <http://forums.adobe.com/people/mjarrott> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/4833406#4833406

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

Anyone having a problem with iMovie in Mavericks v 10.9.3 ? when previewing the a slideshow the colors all disappear after the first image.

Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.

Is your problem with iMovie as the title suggests or with iDVD?

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Is Apple doing anything to fix the problem with displaylink in Mavericks?

I have been doing the Beta track for several years. Apple has been fairly good about ironing out the bugs before a release (as compared to Microsuck and other OS alternatives). But this problem with DisplayLink and Mavericks is about to kill me. I've been running multiple displays for several years and never had problems with prior OSX versions. My work computer (Macbook Pro) is still running Lion and works perfectly with DisplayLink and two 27" Samsung HD monitors. I would really love to get back to using the monitor setup with my Dev environment, however I can't even get a 2013 model Mavericks Macbook Pro to recognize that the DisplayLink device (IBM USB3.0 dock) is connected.
Once or twice I've gotten one monitor to show up after using the computer for a random amount of time. On that occasion, suddenly the main screen blinked and the second monitor came to life. I was reading webmail with Safari at the time and no other apps were running or had been started when it happened. This sort of thing isn't what I would classify as release-ready.
Every seed announcement I keep hoping for a fix, but after 3 since the Mav release, I'm beginning to lose hope. Anyone have info on how this might be made to work?
Thanks
David

DisplayLink also points fingers at Apple, which may be completely valid, but expecting Apple to put much effort into problems that only affect third-party hardware using an unsupported interface seems a bit of wishful thinking.
However, rumor sites indicate a focus on graphics in the next update : http://www.macrumors.com/2014/03/06/apple-seeds-first-os-x-10-9-3-build-to-devel opers/

Problems with OS X Mavericks?

Has anyone else had problems with OS X Mavericks? Since updating the system, my MacBook Pro has crashed (for the first time ever!) and I have continued problems with Finder and Mail (e.g. i cannot close down and have to force quit).

No issues so far on my 2012 Mac Mini but after using this new system for 2 days I find no improvement or features that I would use from ML version. Probably more trouble updating than it was worth.

"...Rasterized type layers..." problem in CS6 extended

I was running CS6 64bit - perpetual licence version - happily. No problems. Then I joined the Adobe subscription service, deactivated and uninstalled CS6. Then I downloaded and installed the CC version of CS6 and updated it. Now when I open any document, or create a new one, I get the following error messager -
"Adobe Photoshop CS6 Extended - Some of the the [sic] type layers in this document were rasterized because an error prevented them from being read".
I can just click "OK" on the message box and all then seems alright. But every time I open an image file - no matter what file format - I get the error message.
Grateful for any ideas. I'll be elevated to Photoshop CC next week but I'd like to get rid of the current CS6 problem before then.
Incidentally, I only managed to update CS6 Extended by uininstalling the old version and installing a fresh online version and then immediately updating using the Application Manager.
Thanks.
AND...
Just discovered that when I try to add text to an image I get the following error message -
"Adobe Photoshop CS6 Extended -Could not complete your request because something prevented the text engine from being initialised"
? Presumably the problems are linked.

Thank you Curt. I was unclear in my first message. I just installed the subscription version over my existing CS6 version. I only uninstalled the downloaded subscription version of CS6 because I was unable to update it (using either the Application Manager or from inside CS6). The update installed ok up to an error message -
"Adobe Photoshop 13.0.1.2 - Installation failed. Error code U44M1P7". Uninstalling CS6 and then reinstalling a downloaded version fresh allowed the update to take place.
As for the problem I was posting about - the text related error messages - I have found the answer I think. The problem is the contents of theTypeSupport folder at username/Appdata/Local/Adobe/ TypeSupport. When I deleted this folder all was fine again - no error messages and text tool working preoperly. When I rebooted the computer after deleting the folder it was recreated with one file missing - which I take to be the culprit. The file was - "AdoneFnt_CommonFonts.lst".
I'll see how things are after CC arrives next week.

Adobe Bridge will not open (with CS6 Extended)

I Installed a student version of CS6 Extended a couple weeks ago and I have used Bridge with it a few times but all of a sudden it wont open. Photoshop opens perfect but bridge doesnt even come up with any error messages...just nothing. Can any one help me? Please? Thank you

Try resetting preferences. Hold down Crtl key (option on mac) and start Bridge. Should get a reset window.

Problems with sonic extender application, Problems with sonic extender application, Problems with sonic extender application

I installed Sonic Extender and at first had no problem with it. Then I connected with a different internet connection and now it will not connect. What is the easiest way to get technical support help. I called and also submitted a request for someone to call me. I had no luck or help with either.

Hi Alex,
I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior. If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears. In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue. You can try to follow the steps at the end of the KB, and let me know if that worked.
http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
Regards,
Aluma G.
National Instruments

I am having the following problems with CS6 *NOT CREATIVE CLOUD*

So I purchased an upgrade for CS5 to CS6 and I did NOT purchase the Creative Cloud Option. I am having this host of problems:
• Illustrator CS6 Crashes on Quit
• Once launched Illustrator CS6 refuses to open new and existing documents unless I quit and restart.
• Once Illustrator CS6 is launched and managed to open an new document, Illustrator CS6 refuses to import a link into a new or existing document unless I quit and restart.
• From time to time, Illustrator CS6 will refuse to copy and paste from one document to another or within the same document until I quit and restart.
• Illustrator CS6 ignores all my UI preferences. This happens every time I restart. This never happened with CS5 when I was running it and I am seriously considering going back to CS5
Has anyone else experienced these problems as well?
I am running my CS6 on OS X 10.9.5, 2.6Ghz Intel Core i7 with 16gb 1600 MHz DDR3 MacBook Pro.
Please help.. there are only so many crash reports I am willing to fill out and send to no one because I get no response.

Sounds like permission problems to me. Go to HD/Users/<yourname>/Library/Application Support/Adobe Illustrator CS6 and do a Get Info on that folder. Make sure that the permissions are set for Read/Write for you.

Problems with Bonjour and Mavericks

I actually have problems getting a Network printer working under Mavericks on a brand new Macbook Pro.
The Printer is an HP Officejet 8500, wich is connected to a Qnap TS-269.
In the config of the NAS, Bonjour is activated.
When I now try to install it, I can see it listed as available printer.
Its named "NAS (Aiprint)", and the installtion seems to work properly.
I choose the right driver (v 3.3.3) and tried to print a test page, wich results in egypt hieroglyphics.
I tried all possible varitions, like using generic postscript printer, the airprint driver, but all leads to the same result.
Installing it manually as IPP-Printer (wich is defined by the NAS-Manual) doesnt work at all.
With all other machines, windows and various osx versions, it works fine.
Any Ideas? The update for that printer-driver from HP doenst help too, seems like its only fixing a bug for USB-connections.

Hi DBCTV,
deathbychinatv wrote:
This forum is depressing. Everybody is citing freeze and crash problems with Premier but noone has a solution.
Actually, what we are suggesting in this forum is to change the permissions on your preferences folder: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest
That has solved a lot of people's problems.
deathbychinatv wrote:
Premier -- get on the stick! I loaded 2014cc and my new Mac Pro behaves like a two-year old. Totally useless. I switched to premier to get away from FCP and this is what I get?
When I try to export movies, I get "system out of application memory" message as it crashes. Premier and "kernel" task show huge consumption of memory on activity monitor.
I'm really sorry your issue is problematic and it frustrating you. However, I remind you that we are people too. We are doing our best to solve any issues that do crop up. I am not completely familiar with the issues that you are having but I will do my best for you.
deathbychinatv wrote:
Apparently there are no issues on machines using Lion OS but Mavericks and Premier don't play well together.
Adobe needs to figure this out quick or it will lose a bunch of customers.
Are you running OS X 10.9.4? Updated Premiere Pro to the latest version (a new one just came out). Please try that if you have not. Also, please remove any third party plug-ins. After doing so, please check and see if your system is behaving normally.
Keep in mind that your issue, and many others, are not solely Adobe issues. We are working with other partners, like Apple, in solving certain problems. With that in mind, I hope we can help solve your issue as soon as possible. Thanks in advance for any other info you can give: FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

HT6030 Do you still have problems with Mail in Maverick after the Mail update 1.0

After the Mail Update 1.0 in Maverick I stil had problems with my passwords and with syncing my mail acoounts (google, icloud and my provider), Finally I removed Avast Antivirus and ..... all my problems are gone. Everything is working fine now. Avast is incompatible with Apple's new mail client!!!

Hello is anyone from Adobe out there? Is anyone from Adobe monitoring the forum? The 1.6 update has stopped the app from crashing when you were trying the sync function to the creative cloud.
However, the sync function is not working as it did in the past. If you make a change in an already existing file in the Photoshop touch app and save it, the sync to the creative cloud results in an explanation point instead of a check to the left of the filename. Toggling the sync button on and off doesn't change the exclamation point to a check. The blue line goes across the file as it normally would when syncing but the explanation point remains. As a result, the changed file is not being synced with the creative cloud.
I am not sure of the exact amount of time it takes, I am guessing about 24 hours. After about 24 hours when you do a sync, the file that had the explanation point to the left of it does change to a checkmark. However, you now have two files. One that reflects the change and has the word conflicted now added to the file name. As well as a file with the same name that doesn't reflect the change and no conflicted added to its file name.
For me at least the sync function no longer causes the Photoshop touch app to crash. However, the 1.6 update also doesn't sync properly to the creative cloud.
Making a change to a file in the Photoshop touch app and trying to sync it shouldn't result in the file not being synced or in a conflicted file. Could someone please help me in regard to this issue.

Serious problems with Adobe and Mavericks 10.9.3

Serious problems with Adobe, crashes, no video export, video deteriorated by a line of pixels.
Video card error from when turning computer on. Overheat when exporting from Premiere or encoder.
Issues also with davinci resolve, output corrupted...
Anybody has a solution?

The issue is now solved. I closed all open apps, and then tried once more to reinstall OS X after restart apple key + R and now everything is fine again.
TUVVH4 wrote:
TUVVH4 wrote:
I have an issue with the Mavericks 10.9.3 update. After restarting it didn't finish the update, but were just running with the grey Apple screen. I was forced to shot down, since my iMac got very hot. Then I needed to reload everything from my Timecapsule. I have tried several times, and everytime I needed to reload reload etc. from Timecapsule. After my lateste reload Safari, Time Machine and System Settings are missing and are replaced by a "?" i the program bar!!! Help anybody!
I have an issue with the Mavericks 10.9.3 update. After restarting it didn't finish the update, but were just running with the grey Apple screen. I was forced to shot down, since my iMac got very hot. Then I needed to reload everything from my Timecapsule. I have tried several times, and everytime I needed to reload reload etc. from Timecapsule. After my lateste reload Safari, Time Machine and System Settings are missing and are replaced by a "?" i the program bar!!! Help anybody!

Problems with CS6 Acrobate Pro X

When I first installed all the programs in the Design and Web Premium CS6 they all worked well. Within 6 months I had my first problems with Acrobate Pro X not being recognized. I had the program removed and re installed. It worked ok for about another 6 months.. Now I am getting all kinds of error messages. I tried to re-install but this error #1311. Any suggestions about getting this program up or ideas on how to contact Acrobate support directly?

Error 1311, 1335, or 2350 "Source file not found...data1.cab" |Install Adobe products | Windows
Mylenium

Problems with CS6 Extended/Maverick

Similar Messages

Maybe you are looking for