Problems with Dynamic Remastering (DRM) with 10.2.0.4 on Linux Itanium

One of my customers is having severe RAC performance issues, which appeared three times so far. Each time, the performance impact lasted around 10 minutes and caused basically a hang of the application. ASH investigation revealed that the time frame of performance issues exactly matches a DRM operation of the biggest segment of the database. During the problematic time period, there are +50 instead of 2-3 active sessions and they are mostly waiting for gc related events: "gc buffer busy","gc cr block busy", "gc cr block 2-way", "gc current block 2-way", "gc current request", "gc current grant busy", etc.
In addition, there is one single session which has wait event "kjbdrmcvtq lmon drm quiesce: ping completion" (on instance 1) and 1-3 sessions with wait event "gc remaster". (on instance 2)
Does anybody have any experience with DRM problems with 10.2.0.4 on Linux Itanium?
I know that it is possible to deactive DRM, but usually it should be beneficial to have it enabled. I could not find any reports of performance impact during DRM operation on metalink. Support is involved but clueless.
Regards,
Martin

Oracle Support has requested stacktraces of lms processes during the period of performance degradation. We decided to enable OSWatcher to get systemwide linux data and procwatcher to get lms process stacktraces. We created a Grid Control User Defined Metric to check whether the symptoms of a DRM performance problem is taking place. Then we triggered the lms stacktraces with a Grid Control Response Action script of the UDM.
Oracle Support has also requested global hanganalyze and system state dumps but we decided not to collect system state dumps because of the big additional performance impact.
The oswatcher data showed that during the drm period, the lms processes had very high CPU resource utilization.
In the meantime Oracle Support has confirmed that we are hitting 6960699. We have received patch 8516675 which includes the bugfix and have installed it. Now, we are waiting to see whether this indeed fixes the issue.

Similar Messages

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • Problem with the renameTO method in the Linux environment

    Hi
    I got a problem with the renameTO method in the Linux environment. The file is not moving.
    This method is returning false. the same code executed successfully in Windows environment.
    Can anyone give some fix to this one or an alternate solution to move the files in both windows and Linux.
    boolean success;
    File root = new File(tempPath);
                   File f = new File(root, phyFileName);
                   File dest = new File(targetPath);
    success = f.renameTo(new File(dest, actualFileName));actualFileName = 400.doc
    dest = /home/jboss-4.0.3/axsscm_1.0/axsscmDocuments/xchange/fileup/fshare/PO/1786

    JITHENDRA wrote:
    Thanks for the prompt replyNo problem.
    >
    Can u solve the below doubt.
    Will renameTo method wont work in Linux? If so why?Did you not read what I said? I suspect you are trying to rename a file so that it actually has to be moved to a different volume (partition or hard disk) so it won't work. One would have the same problem on Windows trying to rename a file on the c: drive to a name on the d: drive.
    >
    >
    Can u give a sample or good link to do the above work which works fine in all environments.?Just follow the pseudo code I gave. 15 minutes work.

  • Problem with install oracle on OEL5.3 linux

    Hello,
    Have some strange problem with oracle enterpise linux 5.3 32 bit, during install Oracle 10gR2 got link errors,
    after founded what is problem with linking oracle executables:
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib
    relink oracle
    /usr/bin/ld: cannot find -lskgxn2
    all depended rpms and parameters are set, looks like missing some library, but cannot recognise with one.
    Have somebody spoted souch error ?

    The zipfile on technet has a checksum:
    Oracle Database 11g Release 1 (11.1.0.6.0) for Linux x86
              linux_11gR1_database_1013.zip (1,844,527,800 bytes) (cksum - 1044354138)
    When the zipfile is downloaded, you can check the zipfile on linux with the cksum command, it should be exactly the same as listed on technet, otherwise the zipfile is corrupted.

  • Problem with Pro*C/C++ complie in linux

    I install Oracle8.1.7 in my Mandrake 7.2 ( like redhat7.1) , and it works well except with proc not works well.
    when I complie the precomp demo program, it gives much errors. I note the proc config file length was zero.
    The following is errors I get when do:
    cd precomp/demo/proc
    make -f demo_proc.mk sample1
    it print very large errors, like follow:
    Pro*C/C++: Release 8.1.7.0.0 - Production on PGFZNe 7TB 6 11:46:04 2001
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    System default option values taken from: /home/u01/precomp/admin/pcscfg.cfg
    Error at line 33, column 11 in file /usr/include/stdio.h
    # include <stddef.h>
    ..........1
    PCC-S-02015, unable to open include file
    Error at line 38, column 11 in file /usr/include/stdio.h
    # include <stdarg.h>
    ..........1
    PCC-S-02015, unable to open include file
    Error at line 29, column 10 in file /usr/include/bits/types.h
    #include <stddef.h>
    .........1
    PCC-S-02015, unable to open include file
    Error at line 14, column 10 in file /usr/include/_G_config.h
    when I run proc without file, it print options as following:
    Pro*C/C++: Release 8.1.7.0.0 - Production on Mon Jul 9 11:19:38 2001
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    System default option values taken from: /home/u01/precomp/admin/pcscfg.cfg
    Option Name Current Value Description
    auto_connect no Allow automatic connection to ops$ account
    char_map charz Mapping of character arrays and strings
    close_on_commitno Close all cursors on COMMIT
    code kr_c The type of code to be generated
    comp_charset multi_byte The character set type the C compiler supports
    config default Override system configuration file with another
    cpp_suffix none Override the default C++ filename suffix
    dbms native v6/v7/v8 compatibility mode
    def_sqlcode no Generate '#define SQLCODE sqlca.sqlcode' macro
    define none Define a preprocessor symbol
    duration transaction Set pin duration for objects in the cache
    dynamic oracle Specify Oracle or ANSI Dynamic SQL Semantics
    errors yes Whether error messages are sent to the terminal
    errtype none Name of the list file for intype file errors
    fips none FIPS flagging of ANSI noncompliant usage
    header none Specify file extension for Precompiled Headers
    hold_cursor no Control holding of cursors in the cursor cache
    iname none The name of the input file
    include none Directory paths for included files
    intype none The name of the input file for type information
    lines no Add #line directives to the generated code
    lname none Override default list file name
    ltype none The amount of data generated in the list file
    maxliteral 1024 Maximum length of a generated string literal
    maxopencursors 10 Maximum number of cached open cursors
    mode oracle Code conformance to Oracle or ANSI rules
    nls_char none Specify National Language character variables
    nls_local no Control how NLS character semantics are done
    objects yes Support object types
    oname none The name of the output file
    oraca no Control the use of the ORACA
    pagelen 80 The page length of the list file
    parse full Control which non-SQL code is parsed
    prefetch 1 Number of rows pre-fetched at cursor OPEN time
    release_cursor no Control release of cursors from cursor cache
    select_error yes Control flagging of select errors
    sqlcheck syntax Amount of compile-time SQL checking
    sys_include none Directory where system header files are found
    threads no Indicates a multi-threaded application
    type_code oracle Use Oracle or ANSI type codes for Dynamic SQL
    unsafe_null no Allow a NULL fetch without indicator variable
    userid none A username/password [@dbname] connect string
    varchar no Allow the use of implicit varchar structures
    version recent Which version of an object is to be returned
    PCC-F-02135, CMD-LINE: User asked for help
    How can I do to solve this problem now?
    Note: I need pro*c/c++ to works well in my project.
    Thank you very much for your kindly help!
    chen chuanwen: [email protected]
    null

    Sorry! I have not explain it clearly.
    To solve it , you do following :
    1. locate stdarg.h ( or find /usr -name stdarg.h ), assume you find a stdarg.h in /usr/lib/gcc-lib/XXX/XXX/include/stdarg.h
    2.ln -s /usr/lib/gcc-lib/XXX/XXX/include/stdarg.h /usr/include/stdarg.h or cp /usr/lib/gcc-lib/XXX/XXX/include/stdarg.h /usr/include
    ( above 2 step was to make Pro*C can find stdarg.h in /usr/include )
    3. for file stddef.h do like step 1,2
    4. append a line in your Pro*C config file:
    CODE=ANSI_C
    null

  • Problems with running a scipt in SuSE Linux

    Hiya,
    Need some help please. I'm writing an application in SuSE linux and I'm having trouble porting it over from my SuSE 9.1 Pro desktop - to my SuSE 9.2 laptop.
    I'll try and keep it as brief and simple as possible so here goes;
    Firstly, everything works perfectly on my desktop which is running SuSE 9.1 Pro (which the program was written in)
    The problem is running the exact same code on my laptop which is running SuSE 9.2 Pro.
    The line of code that is causing me the problem is this:
    Runtime.getRuntime().exec("bash -c /home/bryan/.annwn/scripts/annwnCommand.gmt");As you can see, all I'm trying to do is run a simple script (that will execute a bunch of commands and create an image.)
    Now, this code works perfectly when run on my desktop - but will not run on my laptop.
    When I try to run the code with my program on my laptop, nothing happens. However, if I run this on the command line:
    bash -c /home/bryan/.annwn/scripts/annwnCommand.gmtThe script is run - It works pefectly. It also works on the command line if I just do:
    /home/bryan/.annwn/scripts/annwnCommand.gmtThe only difference in my development environment is SuSE 9.2 over SuSE 9.1 - but I cannot see how this would affect this command not running from within my application.
    So, can you see any reason at all why the command would work perfectly on SuSE 9.1 (and through my application), and perfectly on the command line of SuSE 9.2 - but not when run through my application?
    I know it's a long shot, and it's a pretty vague problem - but if you can think of anything. I'd be very, very grateful.
    Hope this makes sense!
    Many thanks!

    Thanks.
    I'm running both applications as the same user. All other aspects of the application and code work perfectly - just running that script using the Runtime method.
    Basically, everything is exactly the same between to the two machines - only the difference in OS version.
    I'm guessing that it well may be a Linux problem, sorry if this is the wrong forum. I'm just at a complete loss with this!

  • Problems with the "credentials to connect" on Linux

    Hi!
    I have installed the the FlashMediaEncoder and the
    FlashMediaServer on two seperate machines. The FLashMedia Server
    runs on a machine with OS: Linux Red Hat Enterprise. The
    FlashMediaEncoder on a Windows XP machine.
    At the Connect appears the pop-up of "credentials to connect
    to FMS"....
    Which password they must be inserted?
    Exists a Flash Media Server Authentication Add In for Linux?
    Thanks.....

    As the FMS authentication Add-In is currently not available,
    ideally you should not get the credential dialog box.
    There can be two possible reasons for which you are getting
    the credential dialog:
    1. The application mentioned in the URL is not present at the
    FMS. Goto [FMS install directory]/Applications and check whether
    the application is present.
    2. Check whether there is already some access module present
    at [FMS install directory]/modules/access. If yes then removing
    this can solve the problem.

  • Problems with sun studio 12 in suse linux 11

    Hi.
    I installed Sun Studio 12 suse linux with no problems. However, the debugging modules (DBX) are not working any more. When I started Sun Studio, it gave a message about modules that could not be loaded in tha moment. I did not pay attention. But I noticed that all debugging options were disabled.
    Using the module manager, I saw the DBX module was not checked, and I could not change it. I was marked with a red X. So I thought to reinstall the application. However, the uninstall utility doesn't work either.
    According with the documentation, running ./uninstaller does it, but I get the following error message instead
    Exception in thread "main" java.lang.NoClassDefFoundError: uninstall_Sun_Studio_12/class
    Caused by: java.lang.ClassNotFoundException: uninstall_Sun_Studio_12.class
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    I tried to uninstall manually, and then execute installer, by using first the software manager in linux and deleting the producregistry file manually. It worked because I executed the installer. However, in Sun Studio IDE, debugging options are still not available despite I "reinstalled" the application. I checked the log files and they say the file uninstall_Sun_Studio_12.class could not be written.
    So my questions are:
    1. Is there any other way to repair Sun Studio? What could be the possible for this module to stop working?
    2. Does anyone have an idea of why the installer cannot write the uninstaller class?
    I found that perhaps problems regarding Java / Netbeans versions could be the problem, but the ones I have installed are those packages that were installed along with Sun Studio, and both are valid.
    Thank you very much.

    Perhaps you can simply delete the Sun Studio 12 installation tree, because it will not work on SUSE Linux 11.
    This OS is not supported, so any problems you see with SS12 on SUSE 11 will not be fixed.
    But we have a newer version, that should work better.
    You can try to download and install Sun Studio Express 2008/11 (extract pre-installed image from tar.bz2 file).
    Here is a pointer to the web page:
    http://developers.sun.com/sunstudio/downloads/express
    All you need is to provide a email address, and press "Download Now" button.
    You will see a page, that gives you 2 options to download Sun Studio Express 2008/11.
    Use "Option 2": Download Tarfile Installer
    Thanks,
    Nik

  • Memory Problem with Oracle10g R2 and red Hat linux  2.4.21-37.EL

    Hi All.
    i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
    Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
    when i check the free meory it shows only 12mb of ram is free..why..?
    and in swap space it's only 200mb is used...why..?
    when i check the dbwither is taking 1.2GB of RAM why..?
    can anybody help me in this ...how to get free memory or configure os level to get more free memory.
    Sarit
    [email protected]

    Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
    You can see your swap partition being used as the swap space with:
    cat /proc/swaps
    Regards,
    Senthil Murugan

  • Problems with a c++ code on a linux pc translate into java windows pc

    Hello does anyone know how I can use this c++ code in my java program.
    This is a c++ code what we use on a linux pc now I have to make the code
    for a windows pc with java.
    void GetLocalIP(int s,struct sockaddr_in *local)
       struct ifconf cfg;          // info structure to request our IP addr
       struct ifreq  ifs[3];       // part 2 of info structure
       int done=0;
       int x=0,l;
       // Get local ip addr, make information struct
       cfg.ifc_len = sizeof(ifs);
       cfg.ifc_req = ifs;
       // ioctl interface informatoin into the struct we made
       if (ioctl(s, SIOCGIFCONF, (void*)&cfg) == 0)
           l = cfg.ifc_len / sizeof(struct ifreq);
           while (!done && (x<l))
             if (strcmp("eth0",cfg.ifc_req[x].ifr_name)==0)
               memcpy(local,&(cfg.ifc_req[x].ifr_addr),sizeof(struct sockaddr_in));
               done=1;
             x++;
    }

    How do you want to "make the code for a windows pc with java" ?
    Java can use sockets directly, and you can get the Local IP address by this code..
    regards,
    Owen
    import java.net.*;
    public class testnet
        public static void main(String[] args)
            try
                InetAddress local = InetAddress.getLocalHost();
                System.out.println ("Local Host Name : " + local.getHostName() );
                byte[] ip = local.getAddress();
                // Now do a bit of conversion to print the IP address from a byte array
                System.out.print ("Local Host IP   : " );
                int toUnsignedInt;
                for ( int i=0; i<ip.length; i++ )
                    if (i>0)
                        System.out.print ( "." );
                    toUnsignedInt = (int)ip& 0xFF;
    System.out.print ( Integer.toString( toUnsignedInt ) );
    System.out.println();
    catch ( Exception dooohhh )
    dooohhh.printStackTrace();
    System.exit(0);

  • Problem with JOGL applet on Windows and Linux

    I made a simple test applet using JOGL involving a simple animation and a KeyListener. It put it on a web site, and it loads and runs correctly on my Mac, but it gives a blank box with a red x in it on Windows and Linux. Here is the code that I used to deploy the applet. I based it off the sample from https://jogl-demos.dev.java.net/applettest.html
    <applet code="TestApplet"
    width=300
    height=300
    archive="http://download.java.net/media/applet-launcher/applet-launcher.jar,
    http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar,
    http://download.java.net/media/gluegen/webstart/gluegen-rt.jar,
    http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl-demos.jar">
    <param name="codebase_lookup" value="false">
    <param name="subapplet.classname" value="TestApplet">
    <param name="subapplet.displayname" value="JOGL Applet">
    <param name="noddraw.check" value="true">
    <param name="progressbar" value="true">
    <param name="jnlpNumExtensions" value="1">
    <param name="jnlpExtension1"
    value="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp">
    </applet>
    Does anyone know what I'm doing wrong? Thanks for your help.

    never mind. i figured it out.

  • Problem with installing Oracle 10g on Suse Linux

    Hi everybody!
    I downloaded Oracle 10g Express from this url:
    http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
    it is free version for developers.
    I copied it into computer where was installed Suse Linux Enterprise Edition.
    But when I run it shows this kind of error:
    error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
    error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
    It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
    What is the problem? Does anybody know answer?
    Regards,
    Seti's fiction

    Yes, you appear to have a bad copy.
    I have not had a problem when the check sum matched. Therefore I encourage you to download again.

  • Audio Problems with Air 2.0.2 in Linux

    We're seeing an issue which appears to be a bug in the Air 2.0.2 runtime for Linux.  When a video file plays [via VideoDisplay] the audio is heard but as soon as the video is finished, audio cuts out for the entire application.  We ran strace() and noticed Air opens the audio connection at the start of playback and closes it at the end, but will not re-engage audio for any other reason while the application is running.  This includes running different videos or even just playing sound effects.
    Has anyone seen this behavior where when a video is complete, the audio stops all together for the application?  We did not have this problem before Air or in Air 1.5, so I suspect this is a bug in the Air 2.0.2 runtime for Linux.

    Hi,
    I also tried playing 2 videos via VideoDisplay one after the other using the following code:
    <mx:VideoDisplay 
    id="video1" source="/assets/videos/vid1.flv" autoPlay="true" width="400" height="400" x="50" y="20" complete="video2.play()"/><mx:VideoDisplay 
    id="video2" source="/assets/videos/t.mov" autoPlay="false" width="400" height="400" x="550" y="20"/>
    For me, the audio plays fine for the both the videos on Ubuntu 9.10.
    Could you please provide the following information:
    1) The Linux distro you are on.
    2) The sound mixer you are using and its version(ALSA/pulseaudio).
    3) It would be really helpful if you could provide your application/part of source code where you are playing the videos.

  • Problems with CDC/Foundation Profile making on Linux, heip me please!!!

    I am a new to J2ME.My OS is redhat9.0,and building tools is gcc3.4.3.After having downloaded the cdcfoundation-1_0_1-fcs for linux, I unzip it to /home/cdcfoundation/.Under the directory of /build/linux/,I typed the following command:
    make CVM_JAVABIN=/usr/java/jdk1.5.0/bin CVM_DEBUG=true J2ME_CLASSLIB=foundation
    But it failed to build,the error is:
    make: *** No targets specified and no makefile found. Stop.
    I had tried many times,I hope someone can help me!!!
    I am waiting................

    You need ksh (korn shell) in order to compile. It is because this shell provides an option (if I remember well -h) which is not present in other shells like bash.
    So, download it from http://www.kornshell.com and make it available in a folder present in your PATH.
    Hope this help.

  • Problems with CDC/Foundation Profile making on Linux

    I am a new to J2ME.My OS is redhat9.0,and building tools is gcc3.4.3.After having downloaded the cdcfoundation-1_0_1-fcs for linux, I unzip it to /home/cdcfoundation/.Under the directory of /build/linux-i386/,I typed the following command:
    make CVM_JAVABIN=/usr/java/jdk1.5.0/bin CVM_DEBUG=true J2ME_CLASSLIB=foundation CVM_GNU_TOOLS_PATH=/usr/bin
    But it failed to build,the error is:
    make: ksh: Command not found
    make: ksh: Command not found
    H BH B../share/rules.mk:235: ../../build/linux-i686/generated/empty.mk: &#27809;&#26377;&#37027;&#20010;&#25991;&#20214;&#25110;&#30446;&#24405;
    make: ksh: Command not found
    make: *** [../../build/linux-i686/generated/javavm/runtime] Error 127
    I had tried many times,I hope someone can help me!!!
    I am waiting...............

    You need ksh (korn shell) in order to compile. It is because this shell provides an option (if I remember well -h) which is not present in other shells like bash.
    So, download it from http://www.kornshell.com and make it available in a folder present in your PATH.
    Hope this help.

Maybe you are looking for