Problems with headset and front camera

Hi, I get two problems about my Lumia 920 and my phone is still in warranty. Im just wondering whether these two issues are included in the warranty?
1. The left one of my headset suddenly goes wrong today, it cant give any sound now. Can it be fixed?
2. There are too much dust gets into the front camera, which has blurred the picture taken by it. Is there any possible way to clean it?
Thanks

Both should be covered under Warranty
Refer this for more details and the respective validity period ..
BTW, for the Headset issue, first check whether you are inserting the pin properly till the end. You may try a slight rotating actin or pull / push a few times and see. Also check whether there is any dirt within the post on the device that you can clean without damaging any terminals inside ..

Similar Messages

Can i recieve service in Guatemala? Have problem home button and front camera

Hi guys
I'm user of ipod touch 4th generation i bought this in may 2011
And i paid apple care in applestore Glendale L. A CA.
Now i live in Guatemala and my ipod have problem of home button
And front camera(camera problem started when i bought)
What is best solution for my ipod? And can i recieve service?
And where can i meet service center in This country?

Contact an Apple Authorized Service Provider. See:
http://www.apple.com/lae/support/service/options/

Problems with Preview and Digital Camera

Hi All,
I bought a Konica Minolta DImageX1 camera and the first few pics I took and downloaded them onto my ibook ans view them on Preview everything was alright. However, everytime I now transfer pictures to my laptop and when I view them with Preview it displays the following message:
"Preview cannot display the image properly. The file may be corrupt. Reason: Can't cache file". After this the image is loaded anyway.
But when I transfer the pictures to my Windows PC and I view them there, I get no warning message. And I downloaded an Image Viewer freeware from Versiontracker.com and it gave no warning message as well.
Any suggestions as to what could cause this problem with Preview?
Thank you in advance,
Eder
ibook g4 1.2 GHz Mac OS X (10.3.9)

Hi Eder,
I have exactly the same problem with you.
But what I am using is DiMAGE Z6.
What I am concern is that if this affect the image quality.
Anyone who know how to solve this, please advice.
Thanks and good day!

Problem with Facetime and my MacBookPro camera

Hello,
I've got a MacBookPro and I have a problem with Facetime and my front camera.
When I have a discussion with an iMac or an other MacBook the image received by the other person becomes fix.
To unfix it I have to put my finger on my camera and then everything is good until the next time, 4 to 10 seconds later I've got the problem again.
Perhaps somebody can help me.
My head on my screen is always good even when the bug appear on my correspondent's screen.
For information, the 2 mac have the same iOS version (OSX Lion) and Facetime version.

Hi Dave,
Edit: Well, I guess I was lost when I posted this. My answer was regarding a problem with OS X, not iOS. I'm going to leave the answer here in case someone else with a Facetime for Mac issue can benefit, because when you're searching for "Facetime AND Login", you could land in any discussion area. -Jerry
Keychain Access.app is in your Utilities folder in your Applications folder.
The path will be: Macintosh HD > Applications > Utilities > Keychain Access.app.
Keychain is where all your passwords are stored for those applications that you don't want to have to manually log into all the time.
It's a handy app to become familiar with, for instance if you want to look up a password or user name from the past.
Hope this helps you.
Jerry

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Iphone 6 back and front cameras aren't working!!

Hello,
I using the iphone 6 since two months ago and today i noted the back (and front) camera isn´t working. The ecrã becomes black, when i try to photograph the app closes. I heard that the iOS could be damaged and I updated the system to 8.2 (the brand new one!!) but the camera is on the same status. Is it posible to change the iphone at apple store? Is it a hardware problem?
Tks in advance with the help

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider. This should be no problem since the phone is still under warranty.
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Problems with RAC and XA: Fallback

Hello,
we are seing problems with RAC and XA (Tuxedo 11, DB 11.2), specifically encountering "ORA-24798: cannot resume the distributed transaction branch on another instance".
The first scenario relates to fallback after a RAC node failure. There are two servers, S1 and S2. S1 makes an ATMI call to S2. Both servers are in the same Tuxedo group, using TMS_ORA. RAC is set up for failover (BASIC), no load balancing.
The sequence is:
- S1 and S2 are connected to the same RAC node n1. All is well.
- RAC node n1 fails. S1, S2 and the TMS_ORA all fail over to RAC node n2. After the failover has happened, all is well.
- RAC node n1 recovers. All is still well (as there is no automatic fallback).
- S1 (or S2) is restarted (either intentionally or because of a crash). Since n1 is up again, S1 connects to n1. Now we get ORA-24798. Permanently.
S1 is connected to n1 and S2 is connected to n2. Since both are in the same group, both use the same XA transaction branch. When called, S2 attempts to JOIN the transaction branch that S1 started. But the DB (11.2) does not allow the same branch to span more than one node. Hence the ORA-24798.
This seems to be a severe limitation in the combination of Tuxedo, XA and RAC. It basically means we still have to use DTP services, even with Tuxedo 11 and DB 11.2. Or are we missing something?
We could put S1 and S2 into different groups, but that seems to be inefficient, and not practical for a real application (10s of servers).
I am extrapolating from this that RAC load balancing would also not work, as S1 and S2 could be connected to different RAC nodes.
Roger

Roger,
When using an external transaction manager such as Tuxedo you should still declare Oracle services as DTP services when using Oracle Database 11g. The Tuxedo documentation is not clear about this. The relevant 11gR2 RAC documentation is at http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/hafeats.htm and states
"An XA transaction can span Oracle RAC instances by default, allowing any application that uses the Oracle XA library to take full advantage of the Oracle RAC environment to enhance the availability and scalability of the application.
"GTXn background processes support global (XA) transactions in an Oracle RAC environment. The GLOBAL_TXN_PROCESSES initialization parameter, which is set to 1 by default, specifies the initial number of GTXn background processes for each Oracle RAC instance. Use the default value for this parameter clusterwide to allow distributed transactions to span multiple Oracle RAC instances. Using the default value allows the units of work performed across these Oracle RAC instances to share resources and act as a single transaction (that is, the units of work are tightly coupled). It also allows 2PC requests to be sent to any node in the cluster.
"Before Release 11.1, the way to achieve tight coupling in Oracle RAC was to use Distributed Transaction Processing (DTP) services, that is, services whose cardinality (one) ensured that all tightly-coupled branches landed on the same instance—regardless of whether load balancing was enabled. Tightly coupled XA transactions no longer require the special type of singleton services to be deployed on Oracle RAC databases if the XA application does not join or resume XA transaction branches. XA transactions are transparently supported on Oracle RAC databases with any type of service configuration.
A"n external transaction manager, such as Oracle Services for Microsoft Transaction Server (OraMTS), coordinates DTP/XA transactions. However, an internal Oracle transaction manager coordinates distributed SQL transactions. Both DTP/XA and distributed SQL transactions must use the DTP service in Oracle RAC."
This issue came up earlier this year in another newsgroup thread at https://forums.oracle.com/forums/thread.jspa?threadID=2165803
Regards,
Ed

Problem with touchpad and Windows 8.1. Acer Aspire E5-511

I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).

SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone

Potential Problems with Airplay and Mountain Lion

Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie Walters

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Problem with exposure adjustment in Camera Raw

I'm a long time Photoshop user, currently on CS6. Recently I've been having problems with adjusting exposure in Camera Raw. For some reason, it now only works in full stops. Nothing in between works. Same problem with the adjustment brush.
I updated today to the latest version but the problem remains. All other adjustments are working as they should.
Can anyone explain what happened and how I can get back full funcionality?

I have found an acceptable solution to the issue (already posted in this thread: http://forums.adobe.com/message/5920583#5920583 ) after invaluable tips from forum members.
The problems are indeed caused by the Nik plug-ins, and specifically by the Selective Tool plug-in. But you don't need to uninstall anything.
Solution: In your applications folder, choose Photoshop/Plug-ins/Google and you will find the various Nik plug-in folders. Add a tilde sign to the Selective Tool folder (like this: ~Selective Tool). Close Photoshop and open it again. Camera Raw should now be working without issues. The Nik plug-ins will lose some funcionality, but nothing really serious. You will have to manually duplicate a layer before using a Nik filter and the filters won't work with multi-layers. If you desperately need full funcionality, close PS, remove the tilde sign and open PS again.

Problems with answering and making calls

I have owned a Droid 2 for almost a year now. I love it! But for the last few months I have had a problem with answering and making calls. Sometimes when I answer a phone call it connects like I have answered the call but I can't hear anything and the other person can't hear me. The call says I am connected and I can see the timer going but there is no communication. It does the same thing when I go to make calls sometimes. I can hit send and it connects the call but I can't hear anything. The timer is going and the other person answers but I can't hear anything. The only reason I know they answered is because they then call me back and leave a voicemail, sounding very confused. I have to restart my phone and then the problem is solved. But only for a little bit. I haven't been able to pick out a pattern or anything. It is random and very frustrating. I went into my local Verizon store about the issue and they arranged for me to receive a new, certified pre-owned phone because I pay insurance on my phone. I received the phone the next day and everything went great, for a few days. But this phone is also having the same problem. I am getting very frustrated with this because I need to be able to actually talk to people when they call me. Anyone else having the same problem? I want to go back to the store but I feel like they wouldn't do anything more than they did last time, which didn't solve the problem.

I have this same issue on a bi-daily basis: I can place a call, but then I hear nothing. I can answer a call, but I then hear nothing. The calls connect as the people I am in contact with will tell me they answered my calls and heard me, though I could not hear them - and vice versa. Also, this phone does not like to place a call using the "call" option if dialing from "recent calls". I turn this phone on/ off daily, I've taken the battery out on about 50% of the occassions when this issue has happened. This has been a problem for me for approximately 1yr. My early renew date is just shy of 2 months from now and I cannot wait to get rid of this phone. Aside from having great difficulty making/ receiving calls, the phone is overall slow to respond to basic functions like text messaging or using the camera. Also, most times while taking a picture, the camera will "take a picture" but then there is no image in the file. Highly annoying - the only way to temporarily fix this is to reboot - but like the call issue, the problem recurs. I do have a bunch of apps on installed on the phone, but since I also have an APP killer on the phone, nothing aside from "Weather Bug" app is ever really running in the background that would slow this phone. BUT, right now my main concern is may safety: God forbid I am ever in danger or in an emergency situation, this phone's constant malfunctioning could possibly be the physical harm or death of me. I hope that my family can sue the company that provides the software for this phone, Verizon & Motorola in the event of my untimely death.

X-Fi Notebook has a problem with headset/line-in

0X-Fi Notebook has a problem with headset/line-in` First the basics:
-HP Pavillion dv6000
-Intel Core 2 Duo @ .83 GHz
-Windows Vista Home and Student (SP) 32 bit
-3 GB RAM
Ok, now the problem:
-Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
Thanks guys

Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected]

Problems with headset and front camera

Similar Messages

Maybe you are looking for