Problems With Inserting/Changing Artwork - Help Requested

OK...let me set this up...
I currently have approximately 3500 files. When I first starting importing my CD's, I didn't see the need for what I saw as superficial information that I would never need or want. Just song title and artist. Then, sometime ago, I got interested in adding artwork to my files. Back then, it wasn't as important and I kind of didn't take the time to really spend on the files to get what would be quality artwork for all of my files. However, all got artwork and it worked fine.
Fast forward to more recent times, and I decided to improve the artwork for those that I took a more lackadaisical approach previously. Now, I have finished going over them, but I seemed to have some issues with about two dozen files, and it is most perplexing. Any help would be greatly appreciated...
What the issue is that I can't alter the artwork for these two dozen files. I have copy/pasted artwork in the INFO box, and have even tried deleting what was there previously, but to no avail. In addition, I can insert artwork with MPFreaker, and have iTunes show it, but if I alter ANY of the other information in either MPFreaker or iTunes (album, title, etc...), the artwork disappears. However, this does not appear to be the same issue as other issues that I have read about as I researched this seeking an answer. For one thing, it's only the artwork that can't be altered. Other information can be altered with no problem. These are not locked files in the Finder. Also, the permissions are the same as the rest of the other 3400+ files. In addition, I even took the additional step and set the permissions to the iTunes Music folder and then selected "Apply To Enclosed Items" to make sure that all have the same permissions, but to no avail.
The files also play with no apparent problem.
Any help or insight would be most greatly appreciated. If anyone needs any additional info, just ask or check the info about my setup below.

OK...some additional information for those that come across this....
After some more checking, I realized that even though I could change/save other TAG information on the file within iTunes, it was not saving it with the file...When I made changes and then checked with another program, those changes were not reflected, although some of the reverse was true - changes made in the TAG program were not always recognized in iTunes. So in frustration, I opened the file within a sound editor and then faked a change (copy/paste/undo) and then saved....at that point, the file was properly recognized in iTunes.
Hope this helps someone.

Similar Messages

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

sorry for my bad english ..

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

Browser Dog, Amy,
The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
Concerning missing font names, I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:

Problems with INSERT syntax ?

Dear programmers,
I am have a problem with INSERT Syntax,
I have a table with 11 fields out of which one is auto_increment field(id), Now my problem is, Do i need to specifiy autoincrement field in INSERT statement. I dont thinks ?
My Insert statement is as follows ,
int result = st.executeUpdate("insert into tablename"
+"(name, user_group, lage, preis, anmerkung, exp_uri, timestamp, nummer)"
+"values +Objekt+"','"+Kategoriekey+"','"+Lage+"','"+Preis+"','"+Anmerkung+"','"+Dateiname+"','"+date.getTime()+"','"+ObjektID+"')");
thanks in advance
bye

The answer to your question is maybe. Each database handles autoincrements differently. What database are you using?
I also noticed that you are doing an insert using the standard Statement. You should look into using PreparedStatements for performance reasons and issues such as single quotes from within a string.
Matt

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Problem with Tempo change using factory - Please Help!

Hi, All
Im experiencing a problem when I change the tempo of an audio file and want to revert back to its original state. I understand that you can not just undo the process so I try and delete the file from my bin and import the file again. The problem that I am experiencing is that even though the original file is at the original tempo, once imported to my bin the temp changes automaticaly to the one I deleted. Is there something I am doing wrong? any help on this would be greatly appreciated.
Thanks
Patryk

you can stretch any audio file already recorded in Logic but there is simple rulethat you must follow:
the Sample must be recorded in Logic at original BPM tempo
you can use Bus routing or bounce...
all resulting files will be vere same as apple loop...
if your file is not recorded in logic just find the correct BPM and after tha, Bounce it!
G

PROBLEM WITH NEW ROW --- PLEASE HELP

Hello,
I've had it with the framework. It's been 20 hours and counting that I am trying to insert/validate a new record.
Things just don't work as advertised.
Here's the situation:
I have an entity object with various validation rules in the validate() method.
Then I have a simple JSP page to insert new records.
At submit of button, I follow the framework's default
create new row and fill it up, with the difference
that i need to validate the row as soon as I fill it up
with data from the http request:
<jbo:OnEvent name="Create">
<jbo:Row id="newrow" datasource="ds" action="CreateInRange" >
<% try { %>
<jbo:SetAttribute dataitem="*" />
<%
newrow.validate(); //******* NOTICE HERE THAT I VALIDATE
} catch (JboException ex) {
newrow.remove();
throw ex;
} %>
</jbo:Row>
</jbo:OnEvent>
Unexpected behavior 1: If the validation fails,
newrow DOES NOT GET REMOVED!!!! I know this
since when I view data thru a data table component,
the row is there WITH THE ERROR INFORMATION set!!.
If I do a commit transaction, then the erroneous information ENDS UP IN THE DATABASE!!!!!
Unexpected behavior 2: If I do a rollback, every
call to subsequent pages results in a jsp error:
java.lang.ClassCastException: oracle.jbo.html.jsp.datatags.OnEventTag
PLEASE HELP.
Chris Lambrou

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

Problems with Plan Change - Needs Immediate Result

Hello,
I have been a long time Verizon Wireless customer. I have two lines, one of which was assigned to a tablet with a 1gb plan. I maintained this line for the upgrade since my other line has unlimited data. I recently upgraded to the Note 3, and in the process was told that I'd have to establish a new line to accomplish the upgrade. The representative, from Costco, let me know that it shouldn't be a problem transferring the same plan to the newly established line and not to worry about anything going wrong. That night I called Verizon for the first time and worked with a customer service representative who ended up making the problem worse by canceling the tablet line before transferringthe device to the new line. This caused a problem with my sim card, and I have to request a new one because my old was was constantly showing an "aging" status. Even a few days later. The first night consisted of two phone calls to Verizon because the rep mentioned above ended up disconnecting me trying to get over to tech support. The second rep was much more helpful, but wasn't able to do anything and let me know I'd have to work with tech support, but should wait until the next day to allow the sim to "age."
The next day was the 4th of July, so I called back the next day and went through a similar process, spent about 30 minutes with one rep, only to be told my sim was still "ageing" and to talk to tech support. Every time I was connected with tech support it was a minimum 30 minute wait, just to be told that there was nothing they could do, again, and they sent me a new sim card. When i received that sim, at which point it was the following week, I called back and activated my tablet successfully. Hung the phone up and thought all was well, until I saw my balance due the next day. It was nearly double what I usually pay. The representative never informed me that it would default to a prorated amount based on that payment, of 4gb. None of which I need. I called back, again, and was told that I wasn't able to use the old plan I had since it didn't exist anymore. This time the representative was very pleasant, and let me know she'd put a request in to see if the old plan would be possible, given my situation. I was alright with that, and this was the first time I wasn't frustrated after hanging up the phone.
She called me back yesterday letting me know that Verizon isn't willing to allow me to use my old plan, and that there is a new plan options, that is 10 dollars a month. Honestly that was all right, so I called in today to change it to that plan and have it backdated to the date of upgrade to fix my billing issue. During the process of looking up my information, the representative I spoke with today disconnected me. Over the last week and a half I have spent nearly 3-4 hours on the phone with Verizon just trying to fix this issue that was not anything I could have controlled.
The rep at Costco told me I'd have no issues transferring my lien to the new line we opened that day, and the first individual I spoke with on the phone canceled the line too early and further delayed the process by requiring me to request a new SIM card for the tablet. After being disconnected this time, I'm extremely frustrated with the entire situation and Verizon in general. I've been a customer of Verizon for nearly ten years, and for the fist time I am considering moving to another carrier seeing. In that ten year period, I have probably called into customer service less than 5 times. And in the last week and a half I have made more calls, and spent far more time on the phone than every before.
The bottom line is, I need to have the plan changed on my tablet line to something comparable to what I had previously, which was a 20 dollar, 1gb plan with the 10 dollar tablet fee. I need this taken care of ASAP and I need to know it's being done correctly. If Verizon is going to partner with companies like Costco to provide phones to members, and increase their customer base, than these reps need to be better equipped to handle the upgrade process. And it seems that the call centers I have spoken with are a 50/50 shot in terms of reaching someone who is able to do their job effectively and in a timely fashion.
I hope to be contacted with a resolution by today or I will be returning the phone, and looking elsewhere for my wireless needs.
Thank you.
Josh

There is an "undocumented" parameter you need to include in your
page. It MUST be a hidden field value called "p_action". The
form hidden value is either "OK" or "CANCEL" (case sensitive).
Thus, when the form is submitted, this parameter states to
commit the changes. Useful if you have a "Save" button and
a "Cancel" button.

Problem with merging changes made in Business Catalyst

I put some text frames in my Muse project and now my client try to make some changes in text using Business Catalyst but we have big problem because it is impossible to merge changes back to the Muse project. The site is in Polish language but I also tried to do it with English. The result is different but also wrong.
As you can see bellow (screen1)I tried to change words "Adobe Muse" to "adobe muse" and "apps" to "application". Look at Preview on Page result. The newe phrase "adobe muse" is inside the word "videos" instead of following it. So we have: " ....and videoadobe museuse is....". But fortunatelly after clicking "Merge into Muse" everything is OK (screen2).
But when I use Polish language both results are wrong: Preview on Page and the result after merging (see screen 3 and 4)
So I can't work together with my client and it's a big problem because I choose Muse and Business Catalyst for this project just to have this possibility.
Some ides about reasons? I hope these problems are easily solvable.

Hi TheArtDictator,
The issue you're running into is similar to http://forums.adobe.com/message/6012076#6012076.
There isn't a fix yet. What we know is that HTML character entities (like ® or –) can somehow appear in content edited using In-Browser Editing. The Muse sync process doesn't expect/handle them correctly. What we don't know is what causes these entities to be inserted. To help us figure that out, could you find out:
- Which OS and browser (including versions) were used by the client?
- Did the client copy/paste content from external sources?
Thanks,
Abhishek

Problems with setCharacterEnconding, I need Help

Collegues.
I have a problem with Internationalization, specially with the method setCharacterEnconding, because I need to put a new enconde for my request.
And my code compile sucesfully, but when I try to run in a request Client, appear in the Browser the next.
java.lang.NoSuchMethodError: javax.servlet.ServletRequest: method setCharacterEncoding(Ljava/lang/String;)V not found
And this is the source
req.setCharacterEncoding("pt");
String name=req.getCharacterEncoding();
Please the community can help me?.

DrClap.
Sorry, for the inconvenients. Thank's.
Maybe the problem is the container, but sorry. I don�t know how, I can change the servlet container.
Please could you explain me and check in my problem?.
Exactly the ISO8859-1 containt the languaje code pt, but is very extrange that not encode the output wih my source code. Also change the Locale to Portuguese. But is the same the request can�t encode in the getParameter. And for this reazon I try use setCharacterEncoding for give the request the correct encoder but appear the message error.
In this link could you check the codes
http://userpage.chemie.fu-berlin.de/diverse/doc/ISO_3166.html
Also exist a table more clear in the book Java Servlet Programming by Jason Hunter.
Regards

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Select distinct problem with muliple join tables, help needed

Hi,
I have two main tables. Each has its of sub joined tables.
guest_id_for_reservation connects two major tables. This has
to be that way
because my guest may change the room status from single to
double (and the
similar exceptional requests).
guests reservation
guest_id_for_reservation
countrytable hoteltable
delegationtable roomtype
I form a query. I want to select distinct those results. But
it does not
work.
If I do not include any table related to reservation table
and its sub
joined tables (disregarding guest_id_for_reservation), it
works.
Is there a specific syntax for select distinct of this type
or any
workaround.?
Thank you
Hakan

Hi I'm still battling with this - have connected the AX to my Imac via ethernet and it shows up fine in Airport Utility. Status light is green and it says its set up to connect to my existing wireless network using wireless connection. Security in Network Preferences is the same for both: WPA2 Personal.
So I don't think there's a problem with the AX, and my current wireless network (BT Home Hub) is working fine.
And when I restore factory settings Airport Utility can see the AX before updating settings so the wireless side of AX must work too.
I'm figuring it must be something about the settings that mean AU can't see it anymore. But I can't work out what, since security is the same.
Any ideas would be great!

Still problems with ID changing in Teaming 2.1?

Hi,
They are still problems with changing the ID from user in the eDIR when they are
will synchronized with the Teaming system?
In the past it was a very bad thing if the user name (ID) was a shortened form the
name of the user e.g. ssmith for Sarah Smith.
When "our" Sarah has married and her new name was e.g. Sarah Stone, new user ID is
sstone, the Teaming system can't "realize" that ssmith and sstone are the same user.
Is this problem fixed in the version 2.1?
THX
Andre

Hi,
A opened a request by Novell and get the answer that all is still the same since version 1.x.
Maybe this behavior will change in the version 4.x.
It's really sad that Teaming can't handle changed IDs.... really sad....
Than we have two ways... first, we change all our IDs to IDs with digits like 1234 or the second way... we use
SharePoint.... really sad.....
I'm wonder me that we are the only firm with such problem....
THX
Andre

Problems With Inserting/Changing Artwork - Help Requested

Similar Messages

Maybe you are looking for